made in italy used for sale

Sleeve packer/film band roller for film wrapping of very large products. Including shrinking tunnel. Underneath the product the film is overlapping and connected by heat (no sealing). Automatic product infeed, automatic transport into tunnel and outfeed. - Technical specifications sleeve packer: max. speed of the machine in neutral: 20 cycles/min | max. product dimensions: L(unlimited)xW(W+H max. 600mm)xH(max. 300mm) | film width: max. 1600mm | length of sealing blade: 700mm | operating temperature: up to 200?C | conveyer height: 850mm+/-50mm | power: 220/380V, max. 1.8kW | compressed air: approx. 6-8bar | machine dimensions and weight: L2014xW1488xH1850mm, 600kg. Technical specifications shrink tunnel: max. product dimensions: L(unlimited)xW400xH300mm | operating temperature: up to 400?C | conveyer height: 850mm+/-50mm | power: 220/380V, max. 20kW | chamber dimensions: LxBxH: 1500x600x4 ...

Sidesleever for thick PE films, that can do full wrapping of the product. All 4 sides are properly sealed. XXL version for very large products, inclusive suitable shrink tunnel. Low cost packaging solution even for large products of up to W+H

Sleeve packer/film band roller for film wrapping of very large products. Including shrinking tunnel. Automatic product infeed, automatic transport into tunnel and outfeed. - Technical specifications (depending on individual dimensions request): 380V, max. 40kW | ca. 6bar | max. speed of the machine in neutral: 8 cycles/min | max. product dimensions (mm): W(ca.1000-1200)xH(ca.500-600) | machine dimensions (mm): L(ca.5600-9500)xW(ca.2000)xH(ca.2000) | weight (net/gross): ca.1400-2400/1600-2700kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Sleeve packer / film band roller for PE film wrapping of large rolls. Incl. shrink tunnel. - Specifications sleeve machine: 220V, 6kW | max. product dimensions (mm): L1000xW230xH230 | sealing blade length: 1500mm | machine dimensions (mm): L1790xW2340xH1985. - Specifications of shrink tunnel: 380V, 35kW | machine dimensions (mm): L2400xW1880xH1720. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

BILLION série GM 750T/H6860 Année : 2004 Nombre d’heures de fonctionnement : 55 000 heures Force de serrage : 750 T - 7500 KN Groupe d'injection : H6860 Diamètre vis : 105 mm Distance entre colonnes : 1100 x 1100 mm Dimensions des plateaux : 1570 x 1570 mm Epaisseur mini/maxi du moule : 450-1200 mm Course d'ouverture : 1200 mm Volume injectable : 4546 cm3 Pression matière : 1510 bars Dimensions : 11,3 x 2,7 x 2,9 m

Brand Name: GOPEL Model: OPTICON THT 600 LINE Year: 2015 Serial Number: TH-603 Notes: - The machine is in excellent condition and in working order. - No CE manuals and declaration of conformity have been provided. - The goods being sold are declared out of service and with the obligation to restore safety in the devices relating to Legislative Decree 81/08 on machine safety. - PROPERTY INTENDED FOR VAT HOLDERS.

Inline homogenizer Manufacturer: Higra Mix Type HG 140 Capacity: 40,000 l/h Power: approx. 30 kW Speed: 3,000 rpm Dimensions: Length 1100 x Width 450 x Height 600 cm Net weight: 220 kg Mixing chamber: diameter 185 mm Product inlet: DN 100 Product outlet: DN 80 The homogenizer is designed for the production of emulsions and suspensions with a wide range of viscosity.

SANDRETTO série 9 1300/3000 Force de serrage : 300 T - 3000 KN Distance entre les barres d'attache : 570 X 570 mm Dimension du plateau : 860 X 860 mm Epaisseur du moule min / max : 210 - 730 mm Ouverture du moule : 630 mm Volume injectable : 658 cm3 Pression sur le matériau : 1985 bars Diamètre de la vis : 55 mm Puissance totale de la machine : 53,7 KW Rapport L/D : 20 Poids : 11 000 kg Dimensions : 7,04 x 2,22 x 1,82 m

Key data: 3500 , 70

SANDRETTO 350 T serie 7 Reference: serie 7 1960/350 Condition: good Technical Specifications: Clamping force: 350 T / 3500 KN Tie bar spacing: 600 x 600 mm Platen dimensions: 910 x 910 mm Mold thickness (Min/Max): 200-650 mm Opening stroke: 600 mm Injection volume: 1347 cm³ Injection pressure: 1450 bar Screw diameter: 70 mm L/D ratio: 20 Additional Features: Mounted mixer screw on the machine + standard screw + monobloc screw Dimensions: Weight: 14 500 kg

Manufacturer: ENGEL Model: EM 440/150 Year of Manufacture: 2007 Specifications: - Clamping Force: 150 tons - Screw Diameter: 35 mm - Operating Hours: 58,724 Find more here - / Contact us at -

Manufacturer: Engel Model: Victory 1800/ 260 Year of Manufacture: 2008 Specifications: - Clamping Force: 260 tons - Screw Diameter: 60 mm - Operating Hours: 88,266 Find more here - / Contact us at -

Injection pump in exchange PS6-HL-50 ASSY 48270-00004 Mitsubishi S6R2

Transnorm Rising falling Incline with arch belt conveyor GF 6000+800-700-600 RA2181 Technical data: Conveyor length (NL): 6800 mm (6000 mm incline + 800 mm arch) frame width (NB): 700 mm, 800 mm with motor belt width (GuB): 600 mm Overall height (BH): 80 mm, 430 mm with motor Angle: freely adjustable between 0 and 15° Supporting feet: optionally available Conveying speed (v m/s): 0,42 Drive: SEW gear motor, R27 DRS71M4BE1/MM07/LN Electrical data: 50Hz V380-500, kW 0,75 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed controll Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2014 condition: good (used) Conveying length in mm: 6800 ( 6000 + 800 ) Nominal / outside width ...

Hitachi Inkjet Printer, used units. Interesting may look with Ms Lai KW at 011-28357830.

DEMAG ERGOTECH EXTRA 80-430 injection moulding machine was built in 2003 in Germany by Demag Ergotech Wiehe GmbH (now Sumitomo (SHI) Demag Plastics Machinery GmbH). The machine is designed for the economic production of plastic parts of different colours, shapes and sizes, using the injection moulding method. This method involves feeding plasticised plastic into a mould and then clamping it with high press force. The machine’s high-performance components, including a precision mould clamping system operating at a maximum force of 80 tonnes, guarantee high repeatability of the manufactured parts. The DEMAG ERGOTECH 80-430 EXTRA injection moulding machine weighs 3600 kg. Technical specifications of the DEMAG ERGOTECH EXTRA 80-430 injection moulding machine - maximum mould clamping force: 80 t (800 kN) - screw diameter: 40 mm - screw length/diameter ratio: 20 L/D - maximum injectio ...

Presse à injecter DEMAG ERGOTECH 330 T en bon état? Référence : Ergotech E330-1450-NC4S? Année: 1998? 65 000 heures de fonctionnement ? Diamètre vis : 70 mm? Rapport L/D : 20? Volume injectable : 1039 cm3? Poids injectable en PS : 940 gr? Pression d'injection : 1400 bars? Course de dosage maxi : 270 mm?P uissance de chauffe : 27 KW? Dimensions des plateaux : 1040 x 950 mm? Distance entre colonnes : 710 x 630 mm? Epaisseur moule : 330 - 710 mm? Course d'ouverture maxi : 675 mm + Robot SEPRO type 3031 YN MPA II? axe X : 2500 mm? axe Y : 800 mm? axe Z : 1400 mm Dimensions de la machine : 6,50 x 2,00 x 2,30 m? Poids de la machine : 14 300 kg

Clamping force: 1250 kN Ø worm: 35 mm Column spacing: 470 mm Injection weight: 142g Min. mould height: 300 mm Total weight: approx. 6,000kg

Manufacturer: Arburg Model: ALLROUNDER 630 S 2500 – 675 Year of Manufacture: 2003 Technical Specifications: - Operating Voltage: 400 V, 3-phase, 50 Hz - Control Voltage: - 230 V AC, 50 Hz - 24 V DC - Motor Heating Rated Current: 113.0 / 33.0 A - Total Rated Current: 146.0 A - Total Connected Load: 83.0 kW - Tie Bar Distance: 630 mm - Clamping Force: 2500 kN - Screw Diameter: 45 mm - Max. Part Weight (PS): 252 g - Core Pull: Yes (1 unit) - Orientation: Horizontal - Number of Components: 1 - Drive Type: Hydraulic - Robot Operating Hours: 110315 (automatic operation) Find more here - / Contact us at -

Manufacturer: Arburg Model: ALLROUNDER 1200T 800 – 150 (Vertical) Year of Manufacture: 2006 Technical Specifications: - Weight: 7400 kg - Clamping Force: 800 kN - Operating Voltage: 400 V / 3 Phase / 50 Hz - Heating Capacity: 9.4 kW - Pump Motor: 1 × 18.5 kW - Total Connected Load: 27.9 kW - Operating Hours: 86249 (automatic operation) - Tie Bar Distance: 1200 mm - Clamping Force: 800 kN - Screw Diameter: 25 mm - Max. Part Weight (PS): 45 g - Core Pull: Yes (1 unit) - Orientation: Vertical - Number of Components: 1 - Drive Type: Hydraulic - Robot Find more here - / Contact us at -

Caterpillar 3406 DI-T - Used - 187 kW - 6TB

Caterpillar 3306 - Used - 176 HP - 64Z

Efficient filling line for beer and non-alcoholic beverages Manufacturer: Krones Model: Krones Block – Mecafill – Starmatic Capacity: up to 30,000 bottles per hour This used Krones machine is ideally suited for breweries and beverage producers looking for a reliable and high-performance filling line for beer and soft drinks. Filler – Mecafill • Products: Beer, soft drinks (e.g. soda, water, soft drinks) • Closures: Crown cap (KK) & screw cap (SV) • Running Direction: Left to Right (clockwise) Labeling Machine – Starmatic • 2 labeling units for: o Front label o Chest label o Back label Availability: Available from February 2026 Technical highlights: • Robust construction "Made in Germany" • Ideal for medium to large productions • Proven Krones quality – reliable and easy to maintain

A Ferromatik Milacron injection molding machine without additional and peripheral equipment is available. Clamping force: 1000kN, injection pressure: 2000bar, stroke volume: 254cm³, heating capacity: 14.8kW, tie bar distance: 508mm, machine weight: approx. 6750kg, operating hours: approx. 33649h. On-site inspection is possible.

Ball valve DN200 Material: cf-8m (ss316) Weight: 160 kg

Stock number: F1102, Size: L 460 x W 600 H 310 mm., Item: Ink Jet, In stock: Yes, Amount in stock: 1 pc., Motor: 220 Volt, Manufacturer: Matthews Marking Products, Type: Mark EZ Touch, Model: C84

Stock number: F1101, Size: L 510 x W 210 H 605 mm., Item: Ink Jet, In stock: Yes, Amount in stock: 1 pc., Manufacturer: Videojet, Model/type: Excel 170 i, Manual: English

315 litre, Stock number: D924, Litre: 315, In stock: Yes, Amount in stock: 1 pc., Item: Incubator, Inner dimensions: W 600 x H 1170 x D 450 mm., Temperature: Max 40° C, Power: 220 Volt - 300 Watt, Shelf: 3 pcs., Manufacturer: Termaks, Model/type: B 2324 V, Other: Double door

180 litre, Stock number: D987, Litre: 180, In stock: Yes, Amount in stock: 1 pc., Item: Incubator, Inner dimensions: W 600 x D 500 x H 600 mm., Outer dimensions: W 770 x D 650 x H 980 mm., Temperature: Max 30-70° C , Power: 220 Volt, Shelf: 2 pc., Manufacturer: Heraeus, Model/type: BA3, Other: Double door

109 litre, Stock number: D934, Litre: 109, In stock: Yes, Amount in stock: 1 pc., Item: Gas Incubator, Inner dimensions: W 425 x H 520 x D 500 mm., Temperature: 0-55º C, Power: 230 Volt, Shelf: 3 pcs., Manufacturer: Heraeus, Model/type: BB16, Other: Inside copper cladding

44 litre, Stock number: D986, Litre: 44, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Incubator, Inner dimensions: W 450 x D 320 x H 315 mm., Outer dimensions: W 650 x D 490 x H 460 mm., Temperature: 3 heat stages. , Power: 220 Volt - 140 W., Shelf: 2 pcs, Manufacturer: Helios, Model/type: 28311

6 litre, Stock number: D1184, Litre: 6, In stock: Yes, Amount in stock: 1 pc., Item: Incubator, Inner dimensions: W 180 x D 210 x H 165 mm., Outer dimensions: W 410 x D 410 x H 580 mm., Temperature: Max 1100° C. , Power: 2 kW - 220 Volt, Manufacturer: Carbolite, Model/type: ELF 11/6 B

109 litre, Stock number: D935, Litre: 109, In stock: Yes, Amount in stock: 1 pc., Item: Gas Incubator, Inner dimensions: W 425 x H 520 x D 500 mm., Temperature: 0-55º C, Power: 0,6 kW - 230 Volt, Shelf: 3 pcs., Manufacturer: Heraeus, Model/type: BB 16 CU, Other: Double glass door and inside copper cladding.

Stock number: PT2037, Lobe pump head, stainless steel,, INOXPA type SLR2-50/06-2., Horizontal flow., Displacement 0,3008 l/rev., Material: Stainless steel AISI 304

53 litre, Stock number: D2028, Litre: 53, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Incubator/ refrigerator, Inner dimensions: W 400 x H 400 x D 300 mm., Outer dimensions: W 550 x H 950 x D 480 mm., Temperature: 0-60° C, Power: 230 Volt - 500 W., Shelf: 2 pcs., Manufacturer: Memmert, Model/type: ICP 400

230 litre, Stock number: D2021, Litre: 230, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Incubator, Inner dimensions: W 800 x H 580 x D 500 mm, Outer dimensions: W 910 x H 860 x D 660 mm, Temperature: Max 70° C, Power: 230 Volt - 1600 Watt, Shelf: 2 pcs., Manufacturer: Memmert, Model/type: B50, Other: Double door

Internal Device TACCHELLA 612 complete with spindle, dressing unit, Information about technical data are not binding., Machine available subject to prior sale.

53 litre, Stock number: D1204, Litre: 53, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Incubator, Inner dimensions: D 330 x W 400 x H 400 mm., Outer dimensions: D 470 x W 510 x H 680 mm., Temperature: Max 220° C, Power: 220 Volt - 1400 W., Shelf: 1 pc., Manufacturer: Memmert, Model/type: TV30U

High: 240 mm, Long: 825 mm, Width: 255 mm, Distance between points: 500 mm, Specification: Sinus rule

53 litre, Stock number: D1193, Litre: 53, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Incubator, Inner dimensions: D 330 x W 380 x H 400 mm., Outer dimensions: D 520 x W 550 x H 670 mm., Temperature: Max 220° C, Power: 220 Volt - 1400 W., Shelf: 1 pc., Manufacturer: Memmert, Model/type: UM 400, Other: Timer

High: 500 mm, Long: 970 mm, Width: 330 mm, Voltage: 220 V, Maximum weight: Ø plate = 190 mm, Distance between points: 300 mm, Specification: Angle meter

100 litre, Stock number: D1185, Litre: 100, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Incubator, Inner dimensions: W 440 x D 450 x H 500 mm., Outer dimensions: W 570 x D 660 x H 625 mm., Temperature: Max 200° C, Power: 230 Volt - 1030 W., Shelf: 2 pcs., Manufacturer: Salvis, Model/type: TC-100 S

Surface of the table: 800 x 500 x 140 mm.

Specification: Magnifier

135 litre, Stock number: D1187, Litre: 135, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Incubator, Inner dimensions: W 600 x D 450 x H 500 mm., Outer dimensions: W 940 x D 700 x H 680 mm., Temperature: Max 250° C, Power: 230 Volt - 2000 Watt, Manufacturer: Selecta, Model/type: 2005061

151 litre, Stock number: D1151, Litre: 151, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Incubator, Inner dimensions: W 450 x D 450 x H 745 mm., Outer dimensions: W 845 x D 615 x H 1280 mm., Temperature: Max 70° C, Power: 230 Volt - 1000 Watt, Shelf: 3 pcs., Manufacturer: Termaks, Model/type: KBP 6151, Other: Double door

151 litre, Stock number: D1152, Litre: 151, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Incubator, Inner dimensions: W 450 x D 450 x H 745 mm., Outer dimensions: W 845 x D 615 x H 1280 mm., Temperature: Max 70° C, Power: 230 Volt - 1000 Watt, Shelf: 3 pcs., Manufacturer: Termaks, Model/type: KBP 6151, Other: Double door

115 litre, Stock number: D1105, Litre: 115, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Incubator, Inner dimensions: W 600 x D 400 x H 480 mm., Outer dimensions: W 720 x D 560 x H 760 mm., Temperature: Max 70 °C, Power: 230 Volt - 1000 Watt, Shelf: 3 pcs., Manufacturer: Memmert, Model/type: B 40, Other: Double door

260 litre, Stock number: D1100, Litre: 260, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Incubator, Inner dimensions: W 610 x D 590 x H 760 mm., Outer dimensions: W 830 x D 740 x H 1160 mm., Temperature: Max 70°C, Power: 230 Volt - 480 Watt, Shelf: 3 pcs., Manufacturer: Termaks, Model/type: B 8260, Other: Double door

Casing-In-Machine

610 litre, Stock number: T1657, Litre: 610, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Tank, Standing: On legs, Top: Dished, Bottom: Dished, Double jacket: Yes, Tank cover: In the top and side, Agitator: Yes, Motor: Yes, Inner diameter: Ø 775 mm., Manufacturer: INDUSTRI-KEDLER, Year: 1973