136,834 used machines on RESALE, but how to find them? Machine Search
X-ray inspection system designed for large trays, boxes, large bags. Suitable for detecting foreign objects made of metal, glass, stone, plastic, etc. in food or non-food items. - Specifications: conveyor belt width: 600 mm | detection accuracy: Pb from ? 0.2 mm, Fe from ? 0.28 mm, SUS from ? 0.28 mm, non-metallic such as stone, glass, from ? 1.2 mm | X-ray output: 150 kVp, 7.5 mA | X-ray detector resolution: 0.4 mm | X-ray emissions: < 1usv/h | X-ray beam: horizontal scan | conveyor belt height: 750 ? 30 mm | conveyor speed (dependent on product dimensions): 10 ? 60 m/min | screen: 15 touch screen | software: intellisens?X-ray | operating temperature: 5 ? 35 ?C | reject system: optionally available according to requirements | power: 220VAC, 50/60Hz | dimensions of the system: L1800xW1300xH1900 mm | weight: 580 kg. Please note that our new prices are often below the usual used prices. Pl ...
General Description Commercial children's inflatable bounce castle with Mickey & Minnie-themed graphics . Combination play structure incorporating a bouncing area, internal obstacles / climbing section and front slide. Suitable for children's events, private use or rental applications. Technical Details Machine type: Inflatable bounce castle / combo inflatable Theme: Mickey & Minnie Maximum load capacity: 400 kg Material: Heavy-duty PVC Inflatable bouncing / play area Integrated climbing section Front slide Internal inflatable obstacles Safety mesh side panels Inflatable entrance ramp Condition Used and described as being in good working condition. The inflatable is shown fully inflated and appears to hold its shape correctly. Safety netting appears intact, with no obvious major tears or structural deformation visible. Normal surface wear and wrinkling consiste ...
X-ray inspection system for very small packages. Suitable for detecting foreign objects made of metal, glass, stone, plastic, etc. in food or non-food items. - Specifications: conveyor belt width: 85 mm | detection accuracy: Pb from ? 0.2 mm, Fe from ? 0.28 mm, SUS from ? 0.28 mm, non-metallic such as stone, glass, from ? 1.2 mm | X-ray output: 150 kVp, 7.5 mA | X-ray detector resolution: 0.4 mm | X-ray emissions: < 1usv/h | X-ray beam: vertical scan | conveyor belt height: 900 ? 30 mm | conveyor speed (dependent on product dimensions): 10 ?100 m/min | screen: 15 touch screen | software: intellisens?X-ray | operating temperature: 5 ? 35 ?C | reject system: optionally available according to requirements | power: 220VAC, 50/60Hz | dimensions of the system: L1500xW1300xH1810 mm | weight: 455 kg. Please note that our new prices are often below the usual used prices. Please feel free to inqui ...
X-ray inspection system especially for tin cans and plastic containers, jars. Suitable for detecting foreign objects made of metal, glass, stone, plastic, etc. in food or non-food items. - Specifications: conveyor belt width: 200 mm | detection accuracy: Pb from ? 0.2 mm, Fe from ? 0.28 mm, SUS from ? 0.28 mm, non-metallic such as stone, glass, from ? 1.2 mm | X-ray output: 150 kVp, 7.5 mA | X-ray detector resolution: 0.4 mm | X-ray emissions: < 1usv/h | X-ray beam: vertical scan | conveyor belt height: 900 ? 30 mm | conveyor speed (dependent on product dimensions): 10 ?60 m/min | screen: 15 touch screen | software: intellisens?X-ray | operating temperature: 5 ? 35 ?C | reject system: optionally available according to requirements | power: 220VAC, 50/60Hz | dimensions of the system: L2000xW1300xH2060 mm | weight: 650 kg. Please note that our new prices are often below the usual used pric ...
X-ray inspection system specially designed for glass bottles. Suitable for detecting foreign objects made of metal, glass, stone, plastic, etc. in food or non-food items. - Specifications: conveyor belt width: 85 mm | detection accuracy: Pb from ? 0.2 mm, Fe from ? 0.28 mm, SUS from ? 0.28 mm, non-metallic such as stone, glass, from ? 1.2 mm | X-ray output: 150 kVp, 7.5 mA | X-ray detector resolution: 0.4 mm | X-ray emissions: < 1usv/h | conveyor belt height: 1100 ? 30 mm | conveyor speed (dependent on product dimensions): 10 ?100 m/min | screen: 15 touch screen | software: intellisens?X-ray | operating temperature: 5 ? 35 ?C | reject system: optionally available according to requirements | power: 220VAC, 50/60Hz | dimensions of the system: : L3500xW1300xH1795 mm | weight: 700 kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell ...
General Description Large commercial children's inflatable slide with Disney Cars / Lightning McQueen-themed graphics . Designed as a combined climbing and sliding attraction for children's events, entertainment venues and professional rental applications. Technical Details Machine type: Inflatable slide / climbing attraction Theme: Disney Cars / Lightning McQueen Maximum load capacity: 450 kg Material: Heavy-duty PVC Separate climbing lane Large sliding lane Central divider Protective inflatable side walls Padded front landing / play area Inflatable obstacle elements Large 3D Lightning McQueen decorative element Commercial-style inflatable construction Condition Used, good-to-very-good commercial condition. The inflatable is shown fully inflated and appears to maintain its overall structure correctly. Climbing steps, slide bed, dividers, protective barriers and deco ...
X-ray inspection system for small single bags, packs. Suitable for detecting foreign objects made of metal, glass, stone, plastic, etc. in food or non-food items. - Specifications: conveyor belt width: 250 mm | detection accuracy: Pb from ? 0.2 mm, Fe from ? 0.28 mm, SUS from ? 0.28 mm, non-metallic such as stone, glass, from ? 1.2 mm | X-ray output: 80 kVp, 1.25 mA | X-ray detector resolution: 0.4 mm | X-ray emissions: < 1usv/h | X-ray beam: horizontal scan | conveyor belt height: 850 ? 30 mm | conveyor speed (dependent on product dimensions): 10 ? 100 m/min | screen: 15 touch screen | software: intellisens?X-ray | operating temperature: 5 ? 35 ?C | reject system: optionally available according to requirements | power: 220VAC, 50/60Hz | dimensions of the system: L800xW860xH1580 mm | weight: 270 kg. Please note that our new prices are often below the usual used prices. Please feel free t ...
X-ray inspection system for small single bags, packs. Suitable for detecting foreign objects made of metal, glass, stone, plastic, etc. in food or non-food items. - Specifications: conveyor belt width: 270 mm | detection accuracy: Pb from ? 0.2 mm, Fe from ? 0.28 mm, SUS from ? 0.28 mm, non-metallic such as stone, glass, from ? 1.2 mm | X-ray output: 80 kVp, 1.25 mA | X-ray detector resolution: 0.4 mm | X-ray emissions: < 1usv/h | X-ray beam: horizontal scan | conveyor belt height: 850 ? 30 mm | conveyor speed (dependent on product dimensions): 10 ? 100 m/min | screen: 15 touch screen | software: intellisens?X-ray | operating temperature: 5 ? 35 ?C | reject system: optionally available according to requirements | power: 220VAC, 50/60Hz | dimensions of the system: L900xW685xH1680 mm | weight: 300 kg. Please note that our new prices are often below the usual used prices. Please feel free t ...
X-ray inspection system for middle-sized bags, packs. Suitable for detecting foreign objects made of metal, glass, stone, plastic, etc. in food or non-food items. - Specifications: conveyor belt width: 270 mm | detection accuracy: Pb from ? 0.2 mm, Fe from ? 0.28 mm, SUS from ? 0.28 mm, non-metallic such as stone, glass, from ? 1.2 mm | X-ray output: 80 kVp, 1.25 mA | X-ray detector resolution: 0.4 mm | X-ray emissions: < 1usv/h | conveyor belt height: 850 ? 30 mm | conveyor speed (dependent on product dimensions): 10 ? 60 m/min | screen: 15 touch screen | software: intellisens?X-ray | operating temperature: 5 ? 35 ?C | reject system: optionally available according to requirements | power: 220VAC, 50/60Hz | dimensions of the system: L1985xW915xH1790 mm | weight: 560 kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your pac ...
General Description Large commercial children's inflatable slide with Frozen / Snow Queen-themed graphics . Designed as a climbing and sliding attraction for children's events, entertainment venues and professional rental applications. Technical Details Machine type: Inflatable slide Theme: Frozen / Snow Queen Maximum load capacity: 400 kg Material: Heavy-duty PVC Integrated climbing section Twin sliding lanes Central lane divider High protective side walls Padded front landing / safety area Commercial-style inflatable construction Condition Used and described as being in excellent condition. The inflatable is shown fully inflated and appears to maintain its structural shape correctly. Climbing steps, slide lanes, central divider, side structures and front safety area appear substantially complete. Normal creasing and cosmetic wear consistent with previous commercial u ...
High speed sleeve shrinking machine to do multipacks of bottles, cans, etc. including module to build up (NORDSON glue system) and add a tray underneath the multipack. Including shrink tunnel. Suitable to do 2x3, 3x4, 4x6 or other arrangements of containers. Suitable for PE shrink film with a thickness of 60-100?m and a film transverse contraction ratio of 30-40% and a longitudional contraction ratio of 60-70%. - Specifications: SIEMENS PLC control and SIEMENS touchscreen, SCHNEIDER contactor, FESTO cylinder, SIEMENS servo motors to feed and cut the film | bottle (can or container) size: 0.25 to 1.5 liter, diameter: 55-120mm, height: 120-300mm | max. dimensions for the complete multipack: L(150-720)xW(250-450)xH(120-300)mm | max. speed of the machine in neutral: 50 cycles/minute | total dimensions: L10070xW1650xH2485mm | weight: 5600kg | power: 380V, 13kW (machine) and 380V, 63.75kW (shr ...
Sleeve packer/film band roller for film wrapping of very large products. Including shrinking tunnel. Underneath the product the film is overlapping and connected by heat (no sealing). Automatic product infeed, automatic transport into tunnel and outfeed. - Technical specifications sleeve packer: max. speed of the machine in neutral: 20 cycles/min | max. product dimensions: L(unlimited)xW(W+H max. 600mm)xH(max. 300mm) | film width: max. 1600mm | length of sealing blade: 700mm | operating temperature: up to 200?C | conveyer height: 850mm+/-50mm | power: 220/380V, max. 1.8kW | compressed air: approx. 6-8bar | machine dimensions and weight: L2014xW1488xH1850mm, 600kg. Technical specifications shrink tunnel: max. product dimensions: L(unlimited)xW400xH300mm | operating temperature: up to 400?C | conveyer height: 850mm+/-50mm | power: 220/380V, max. 20kW | chamber dimensions: LxBxH: 1500x600x4 ...
Sidesleever for thick PE films, that can do full wrapping of the product. All 4 sides are properly sealed. XXL version for very large products, inclusive suitable shrink tunnel. Low cost packaging solution even for large products of up to W+H
General Description Large commercial children's inflatable slide with Avengers-themed graphics . Designed as a combined climbing and sliding attraction for children's events, entertainment venues and professional rental applications. Technical Details Machine type: Inflatable slide / climbing attraction Theme: Avengers Maximum load capacity: 450 kg Material: Heavy-duty PVC Separate climbing lane Large sliding lane Central divider Protective inflatable side walls Safety mesh at upper section Padded front landing / safety area Commercial-style inflatable construction Condition Used, good-to-very-good commercial condition. The inflatable is shown fully inflated and appears to maintain its overall geometry correctly. Slide surface, climbing steps, safety barriers and upper netting appear substantially complete. Normal wrinkling and cosmetic wear are visible, particularly ...
Sleeve packer/film band roller for film wrapping of very large products. Including shrinking tunnel. Automatic product infeed, automatic transport into tunnel and outfeed. - Technical specifications (depending on individual dimensions request): 380V, max. 40kW | ca. 6bar | max. speed of the machine in neutral: 8 cycles/min | max. product dimensions (mm): W(ca.1000-1200)xH(ca.500-600) | machine dimensions (mm): L(ca.5600-9500)xW(ca.2000)xH(ca.2000) | weight (net/gross): ca.1400-2400/1600-2700kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.
Sleeve packer / film band roller for PE film wrapping of large rolls. Incl. shrink tunnel. - Specifications sleeve machine: 220V, 6kW | max. product dimensions (mm): L1000xW230xH230 | sealing blade length: 1500mm | machine dimensions (mm): L1790xW2340xH1985. - Specifications of shrink tunnel: 380V, 35kW | machine dimensions (mm): L2400xW1880xH1720. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.
SANDRETTO série 9 1300/3000 Force de serrage : 300 T - 3000 KN Distance entre les barres d'attache : 570 X 570 mm Dimension du plateau : 860 X 860 mm Epaisseur du moule min / max : 210 - 730 mm Ouverture du moule : 630 mm Volume injectable : 658 cm3 Pression sur le matériau : 1985 bars Diamètre de la vis : 55 mm Puissance totale de la machine : 53,7 KW Rapport L/D : 20 Poids : 11 000 kg Dimensions : 7,04 x 2,22 x 1,82 m
General Description Large commercial children's inflatable slide with Ice Age-themed graphics . Designed as a combined climbing and sliding attraction for children's events, entertainment venues and professional rental applications. Technical Details Machine type: Inflatable slide / climbing attraction Theme: Ice Age Maximum load capacity: 450 kg Material: Heavy-duty PVC Separate climbing lane Large sliding lane Central divider Protective inflatable side walls Upper safety mesh Padded front landing / play area Commercial-style inflatable construction Condition Used, very good commercial condition. The inflatable is shown fully inflated and appears to maintain its structure and geometry correctly. Climbing steps, slide bed, dividers, front barriers and upper safety net appear intact. The PVC and printed graphics remain bright and commercially presentable. Normal wrinkl ...
Brand Name: GOPEL Model: OPTICON THT 600 LINE Year: 2015 Serial Number: TH-603 Notes: - The machine is in excellent condition and in working order. - No CE manuals and declaration of conformity have been provided. - The goods being sold are declared out of service and with the obligation to restore safety in the devices relating to Legislative Decree 81/08 on machine safety. - PROPERTY INTENDED FOR VAT HOLDERS.
Capacity: 1050-4500pcs/h, adjustable proofing times: 2.5min/5min/7.5min/10min, weight range: 300-1400g, control: Siemens CPU 314C-2 DP. The proofing cabinet is equipped with a reinforced basket drying system, but without heating or steam injection. Documentation available. An on-site inspection is possible.
LEDWALL Infiled ER 2.9mm panel 50x50 Auction-ID: A1-48746-463
Key data: 3500 , 70
SANDRETTO 350 T serie 7 Reference: serie 7 1960/350 Condition: good Technical Specifications: Clamping force: 350 T / 3500 KN Tie bar spacing: 600 x 600 mm Platen dimensions: 910 x 910 mm Mold thickness (Min/Max): 200-650 mm Opening stroke: 600 mm Injection volume: 1347 cm³ Injection pressure: 1450 bar Screw diameter: 70 mm L/D ratio: 20 Additional Features: Mounted mixer screw on the machine + standard screw + monobloc screw Dimensions: Weight: 14 500 kg
Injection pump in exchange PS6-HL-50 ASSY 48270-00004 Mitsubishi S6R2
Transnorm Rising falling Incline with arch belt conveyor GF 6000+800-700-600 RA2181 Technical data: Conveyor length (NL): 6800 mm (6000 mm incline + 800 mm arch) frame width (NB): 700 mm, 800 mm with motor belt width (GuB): 600 mm Overall height (BH): 80 mm, 430 mm with motor Angle: freely adjustable between 0 and 15° Supporting feet: optionally available Conveying speed (v m/s): 0,42 Drive: SEW gear motor, R27 DRS71M4BE1/MM07/LN Electrical data: 50Hz V380-500, kW 0,75 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed controll Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2014 condition: good (used) Conveying length in mm: 6800 ( 6000 + 800 ) Nominal / outside width ...
LEDWALL Infiled ER 2.9mm panel 50x100 Auction-ID: A1-48746-451
LEDWALL Infiled ER 2.9mm panel 50x100 Auction-ID: A1-48746-445
LEDWALL Infiled ER 2.9mm panel 50x50 Auction-ID: A1-48746-465
DEMAG ERGOTECH EXTRA 80-430 injection moulding machine was built in 2003 in Germany by Demag Ergotech Wiehe GmbH (now Sumitomo (SHI) Demag Plastics Machinery GmbH). The machine is designed for the economic production of plastic parts of different colours, shapes and sizes, using the injection moulding method. This method involves feeding plasticised plastic into a mould and then clamping it with high press force. The machine’s high-performance components, including a precision mould clamping system operating at a maximum force of 80 tonnes, guarantee high repeatability of the manufactured parts. The DEMAG ERGOTECH 80-430 EXTRA injection moulding machine weighs 3600 kg. Technical specifications of the DEMAG ERGOTECH EXTRA 80-430 injection moulding machine - maximum mould clamping force: 80 t (800 kN) - screw diameter: 40 mm - screw length/diameter ratio: 20 L/D - maximum injectio ...
Manufacturer: Arburg Model: ALLROUNDER 630 S 2500 – 675 Year of Manufacture: 2003 Technical Specifications: - Operating Voltage: 400 V, 3-phase, 50 Hz - Control Voltage: - 230 V AC, 50 Hz - 24 V DC - Motor Heating Rated Current: 113.0 / 33.0 A - Total Rated Current: 146.0 A - Total Connected Load: 83.0 kW - Tie Bar Distance: 630 mm - Clamping Force: 2500 kN - Screw Diameter: 45 mm - Max. Part Weight (PS): 252 g - Core Pull: Yes (1 unit) - Orientation: Horizontal - Number of Components: 1 - Drive Type: Hydraulic - Robot Operating Hours: 110315 (automatic operation) Find more here - .ucymachines/ Contact us at - sales@ucymachines
Manufacturer: Arburg Model: ALLROUNDER 1200T 800 – 150 (Vertical) Year of Manufacture: 2006 Technical Specifications: - Weight: 7400 kg - Clamping Force: 800 kN - Operating Voltage: 400 V / 3 Phase / 50 Hz - Heating Capacity: 9.4 kW - Pump Motor: 1 × 18.5 kW - Total Connected Load: 27.9 kW - Operating Hours: 86249 (automatic operation) - Tie Bar Distance: 1200 mm - Clamping Force: 800 kN - Screw Diameter: 25 mm - Max. Part Weight (PS): 45 g - Core Pull: Yes (1 unit) - Orientation: Vertical - Number of Components: 1 - Drive Type: Hydraulic - Robot There is an issue with the monitor. Monitor board needs replacement. Find more here - .ucymachines/ Contact us at - sales@ucymachines
Efficient filling line for beer and non-alcoholic beverages Manufacturer: Krones Model: Krones Block – Mecafill – Starmatic Capacity: up to 30,000 bottles per hour This used Krones machine is ideally suited for breweries and beverage producers looking for a reliable and high-performance filling line for beer and soft drinks. Filler – Mecafill • Products: Beer, soft drinks (e.g. soda, water, soft drinks) • Closures: Crown cap (KK) & screw cap (SV) • Running Direction: Left to Right (clockwise) Labeling Machine – Starmatic • 2 labeling units for: o Front label o Chest label o Back label Availability: Available from February 2026 Technical highlights: • Robust construction "Made in Germany" • Ideal for medium to large productions • Proven Krones quality – reliable and easy to maintain
A Ferromatik Milacron injection molding machine without additional and peripheral equipment is available. Clamping force: 1000kN, injection pressure: 2000bar, stroke volume: 254cm³, heating capacity: 14.8kW, tie bar distance: 508mm, machine weight: approx. 6750kg, operating hours: approx. 33649h. On-site inspection is possible.
109 litre, Stock number: D934, Litre: 109, In stock: Yes, Amount in stock: 1 pc., Item: Gas Incubator, Inner dimensions: W 425 x H 520 x D 500 mm, Temperature: 0-55º C, Power: 230 Volt, Shelf: 3 pcs., Other: Inside copper cladding
maximum number of results exceeded
please refine your search
1.800 € 
