made in italy used for sale

Used Air Compressor Ingersoll-Rand CENTAC C100MX3-2SH 8.23 bar General Description of the Used Air Compressor Ingersoll-Rand CENTAC The Used Air Compressor Ingersoll-Rand CENTAC C100MX3-2SH 8.23 bar efficiently meets industrial compressed air supply needs. Consequently, its advanced structure ensures reliable and continuous operation. Furthermore, a three-phase electric motor directly couples through a gear-type spacerless coupling, optimizing performance by minimizing mechanical losses and improving power transmission. This compressor belongs to the Low Pressure category, operating at a maximum pressure of 8.23 bar absolute, which is equivalent to approximately 7.23 bar relative to atmospheric pressure. As a result, its design makes it ideal for industrial applications that do not require pressures exceeding 10-15 bar, ensuring stable and efficient operation. The machine utilizes a thre ...

Used Case Divider Inserter APE year 1998 Introduction In the world of bottling, every detail matters. Moreover, the efficiency and reliability of the APE Case Divider Inserter can make the difference between a smooth production line and additional costs due to unforeseen interruptions. The APE 2001 Model: A Pillar of Reliability This machine has been a benchmark in the bottling industry since its launch in 1998. This model is designed to accurately and swiftly insert dividers into 6 and 12-bottle cartons, ensuring efficient and uninterrupted production flow. Key Technical Features The robust design of the APE Case Divider Inserter and its advanced technology ensures consistent performance even in high-production environments. Additionally, the divider insertion system has been optimized to guarantee precise and uniform positioning, minimizing waste and enhancing packaging quality. Operat ...

Overview  This empty bottle inspector was built in 2009 by the German manufacturer Heuft and is still in operation until the end of October. The machine is available as it is being converted to a new inspection solution as part of a line modernization. The system includes the Heuft InLine reflexx Release 9 empty bottle inspector, the Heuft Spectrum SX TB 72 pre-sorter and the associated Heuft Gateway II for network connection. Interested parties have the opportunity to view the inspection line in operation by prior arrangement. Technical details Output: up to 72,000 bottles per hour Year of construction: 2009 Bottle types that can currently be processed: 0.33 l ale / green / crown caps 0.33 l ale / brown / crown cap 0.50 l NRW / brown / crown cap 0.50 l NRW / clear / screw cap 0.50 l Euro / brown / crown cap 0.33 l Krombacher-Bügel / brown / with embossing 0.50 l swing top / brown Cont ...

End-of-line X-ray scanner for professional foreign body detection,, Ideal introduction to state-of-the-art X-ray inspection,, easy integration into existing production lines,, comfortable user interface,, easy, fast and thorough cleaning,, Max Product, Height/width: See enclosed beam chart, Running direction: L->R, conveyor belt, height: 850 – 950 mm (adjustment range), Throughput: approx. 100 pcs/min (please contact us before submitting an offer), Degree of protection: IP 65, Sorting: using band-stop, Total length: 1,800mm, Bandwidth: 420 mm, Scan width: 400 mm, VPN access: yes, EKS: Yes, X ray lamp, Monitored yellow: yes, Light red: yes (active with FK detection), Statistics export: yes, Basic machine equipment, a) General machine data, • Industry scanner made of stainless steel with open profile, • Power supply connection:, o 110-230VAC / 50/60Hz / 1Ph I o approx. 2.2 kVA I o ap ...

Description Item # 9231 - CROISSANT/ CAKE INJECTION FILLING MACHINE Manufactured by GORRERI Model SVG800 - 800mm working width For fillings such as: creams, jams, fruit jelly Two sets of needles : for big croissants/cakes: for mini croissants/cakes Year 2007 (used in production for 2 1/2 years and then held as a back-up machine) Production capacity: 20 cycles/min Weight: 750 kg Power: 7.5 kW Feeding tension: 380 V (3Ph+T+N) Auxiliary tension: 24 V DC Frequency: 50 Hz Working pressure: 6 bar

This 5-axis SUMITOMO SHI DEMAG IntElect2 100/470-250 was manufactured in 2021. It features a clamping force of 1000 kN and a tie bar distance of 470 mm. The machine includes an injection unit size of 250 and a screw diameter of 30 mm. If you are looking to get high-quality injection moulding capabilities, consider the SUMITOMO SHI DEMAG IntElect2 100/470-250 electrical injection moulding machine we have for sale. Contact us for further details.

Te koop: Industriële Doseerkast Bevat: 1x Intertec SL minitherm DFA T3 BI 1x MSA ultima XE A-ULTX-SENS-59-4-0 1x Raychem JBU-100-L-E 1x Rose PTB 00 ATEX 1002 3x Krohne PTB 03 ATEX D127X 1x Genie 123 Supreme membrane seperator Aantal: 1 Order number: 000.1 Voor meer info graag bellen of mailen. Email: wh.derikxgmail.com Phone: +31620758459 De prijs is excl. 21% btw Voor internationale verzending: prijs aanvragen

Stepper motor with gearbox for mikrocutter INOTEC I175 - NEW Article No. : 9078429, 30026139, I175-400767 Request a quote iNTER-WiBA Sp.J. ul. Krakowska 263 PL 43-305 Bielsko-Biala VAT number: PL547-17-47-669 tel. 0048/33 812 58 60

Description: see pictures and type plates Type 1900 Operating overpressure 6bar Content 1720l Flow temperature 100°C Heat output 1400KW

Specification Injection moulding machine Demag IntElect 100/420-410 (all-electric) General data Clamping force: 100 t (1000 kN) Year of Make: 2007 Control: NC4 / MC4 Injection unit: 410 Screw diameter: 40 mm Clamping unit Clearance spar spacing: 420 x 420 mm Machine weight: approx. 5,000 kg Equipment: 2 x hydraulic core pull Location: Aachen, Germany

Complete AMUT E100 Coextrusion Line + Inline ILLIG RDM 75K Thermoformer, AMUT line year: 2010, ILLIG RDM 75K year of manufacture: December 2007, Consisting of:, AMUT E100 Coextrusion Line, - AMUT 4-component mixing and dosing unit with integrated vacuum pump, - Main extruder AMUT EA100, - Screw diameter: 100 mm, - L/D ratio: 35, - 8 heating zones, - Heating capacity: 54.9 kW, - Air cooled, - Drive motor: 178 kW, - Degassing pump: 2.2 kW, 35 m³/h, - Automatic screen changer, - Melt pump, Coextruder AMUT EA60, - Screw diameter: 60 mm, - L/D ratio: 33, - 3 heating zones, - Heating capacity: 26.4 kW, - Air cooled, - Drive motor: 59.5 kW, - Automatic screen changer, - A-B-A black-box adapter, - AMUT flex-lip die, - Die width: 800 mm, - Thickness range: 0.15 to 1.8 mm, - Complete pumping group, Cooling Stack and Control Desk, - 3-roll polished chrome cooling stack, - Working width: 1,000 mm,  ...

Complete AMUT E100 Coextrusion Line + Inline ILLIG RDK 80 Thermoformer, AMUT line year: 2010, ILLIG RDK 80 year: December 2007, Consisting of:, AMUT E100 Coextrusion Line, - AMUT 4-component mixing and dosing unit with integrated vacuum pump, - Main extruder AMUT EA100, - Screw diameter: 100 mm, - L/D ratio: 35, - 8 heating zones, - Heating capacity: 54.9 kW, - Air cooled, - Drive motor: 178 kW, - Degassing pump: 2.2 kW, 35 m³/h, - Automatic screen changer, - Melt pump, Coextruder AMUT EA60, - Screw diameter: 60 mm, - L/D ratio: 33, - 3 heating zones, - Heating capacity: 26.4 kW, - Air cooled, - Drive motor: 59.5 kW, - Automatic screen changer, - A-B-A black-box adapter, - AMUT flex-lip die, - Die width: 800 mm, - Thickness range: 0.15 to 1.8 mm, - Complete pumping group, Cooling Stack and Control Desk, - 3-roll polished chrome cooling stack, - Working width: 1,000 mm, - Roll diameters: ...

thread dia.: 16 mm stroke: / mm table-size: / mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manufacturer: General Inspection (Gi) Model / Machine Type: GI-HALO Date of Manufacture: 10/2018 Find more here - .ucymachines/ Contact us at - sales@ucymachines

Incubator Shaker (stackable benchtop shaking incubator)2 units in a stacked configuration (photographed together)

<br>AGFA Apogee Print-Drive Series 3 VLF with Inkdrive, DQS and TIFF output. The Optionc Inkdrive (ZIP3), DQS, and TIFF output are enabled in the dongle. Consisting of: CD and latest update, dongle, APIS card and APIS adapter<br><br><br>Verf Gbar: now

<br>AGFA Apogee Print-Drive Series 3 VLF with Inkdrive, DQS and TIFF output. The Inkdrive(CIP3), DQS, and TIFF output options are enabled in the dongle. Consisting of: CD and latest update, dongle, APIS card and APIS adapter<br><br><br>Verf Gbar: now

Brands E.W. Menn / Ingramatic / P&E / Hilgeland Diameter ranges from 1 mm - 20 mm

Makes: Hilgeland / EW Menn / Ingramatic Diameter ranges 1mm - 20mm

2st. DAUB oven THERMO-ROLLING type RDTO 08.12,5.10 SX02 ofen for 20 tins usable total area 10.00 m and 178 baking surface floor 1.00 m and 178 baking square measure floor 78 x 58 cm 2 ofen Totally total area 20.00 m and 178 - 40tins stove is in very good state general and thorough outdated. functions as anew. a very good steam. secondary circulation for the baking chamber. turbo-equipment. everything maagnetic pumps incl. Daub Thermooel-boiler arrangement with magnetic pumps including. 8 stuck anew stikkenwagen including. 80 stuck rand two rand alubleche sales incl. cargo and assembly on inquiry I also have to sell 2st. DAUB oven THERMO-ROLLING type RDTO 08.12,5.7 usable total area 7.00 m and 178 (7 auflage, high shelves) price on inquiry

6pcs. DAUB oven THERMO-ROLL type RDTO 08.12,5.10 SX02 One oven for 20 sheets Total usable area 10.00 m² Baking area per floor 1.00 m² Baking area size per floor 78 x 58 cm 6 oven Total total area 60.00 m² - 120plates Furnace is in very good condition, General and thorough overhaul. Works like new. A very good steam. Secondary circuit for the baking chamber. Turbo equipment. All maagnetic pump incl. Daub thermal oil boiler system with magnetic pump Including. 12 stuck stikkenwagen Sale incl. freight and assembly on request I also have to sell 2st. DAUB oven THERMO-ROLL type RDTO 08.12,5.7 ( 7 editions, high shelves) Price on request

Homogenizer IUL instruments masticator modell: µ-Prozessor technical details: engine: induktion rotation speed: 500 - 1500 rpm speed increaser: 1:6 strokes/Sec.: 3.0 - 8.5 / 50 Hz 3.0 - 9.9 / 60 Hz voltage: 230 Volt ; 50 Hz / 110 V ; 60 Hz Leistung: 270 Watt dimension: l x w x h: 420 x 262 x 322 mm weight: 20 kg

1 of used tray-/padshrinkpacker, make KHS Kisters, type Innopack TSP 80 V with 180-degree (clockwise) curve and shrinktunnel, new 2004. Machine has an 8-lane infeed and is capable of producing trays (and/or) pads either single lane (i.e. 24 cans/bottles per tray/pad) or dual-lane (i.e. 12 cans/bottles per tray/pad) in shrinkwrap film (print-registered), at a maximum capacity of 80 cycles (i.e. 80/160 trays) per minute. Operating direction: from right to left as seen from operator\s station. With Allen Bradley Control Logix PLC / Panel View 1000, Indramat servo drives, ITW Quattro hot-melt unit. Both packer and shrinktunnel easily adjustable via servo\s and spindles for various formats as well as single-/dual-lane. Wired for 480V/60Hz. Various manuals available. Equipment in excellent condition!

1 x Repiquet 2550mm wide x 820mm dia 4 roll inverted L Calender, Machine type: CALANDRE 4 CYL DE 820 x 2550, Machine no. 70-C9-87 Motorised nip adjustment, Peripherally drilled rolls, High pressure hot water hearing Bush bearings with flood lubrication, Hydraulic pre-loading to all rolls, Roll bending and unbending on roll 4, Cross axis on roll 3 and 1. Automatic bank sensors/control + camera system Traversing unit for roll buffing or sand blasting. 'Citroen' unidrive gearbox, type: SPECIAL, order no. 50491, Power 140/240 C.V. Speed 1500/2250, Output 46/59 with individual motor to each roll- Roll 1 and 4 - 130HP, Roll 2 and 3 - 240HP, Max calender speed 120m/min. Dual embossing station with approx 25 x embossing rolls (+ 5 x rubber pressure rollers) In very good condition.

We have large stock of now OEM-obsolete used mechanical spare parts and electric / electronic parts for KHS, Kisters and ZVT tray- and shrinkpacking machines. Including AEG DPW 101/102, Kisters PC09 / Kisters PC20 / Kisters PC30 / Kisters PC40, and Indramat servo drives and controllers, Mayr Primo servo controllers. Details upon request. MAC 71C-0-JS-4-C/95-A-0/WI504LV/S001 MAC 71C-0-JS-4-C/95-A-0/WI504LX/S001 MAC 71C-0-JS-4-C/95-A-1/WI504LV/S001 MAC 71C-0-JS-4-C/95-A-1/WI504LX/S001 MAC112B-0-GD-4-C/180-A-0/WI504LV/S011 MAC112B-0-GD-4-C/180-A-0/WI504LX/S011 Mayr Primo 2 + am 1 type P22.004.0 Mayr Primo Compact type P21.004.0 TR Electronic AE100S / HE100S / CS100S Bosch Rexroth PPC controllers including PPC-R02.2N-N-NN-P2-NN-FW, PPC-R02.2N-N-V2-NN-NN-FW and PPC-R22.1. For most of these units we can also provide FW up- / down-load / copy service. (including on-site).

Cat. No. 12-1120 in very good condition Type 125VT-DS Model: HTIRM Size: NW 65 Serial-No. 1251149 Original Price: Euro 30.000,- Measurements and Weight: LxWxH: 166 x 52 x 102 cm Weight: 330 kg For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on dimensions and destination.

Cat. No. 12-1175 in very good condition Measurements and Weight: LxWxH: 125 x 66 x 92 cm Weight: 195 kg Model: HTIRM Type: 40VT-DS NW 50 Pressure: 10 bar Original Price: Euro 15.000,- For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on dimensions and destination.

Cat. No. 12-1125 in a very good condition Model: HTIRM Serial-No. 401543 Type: 40VT-DS NW 50 Pressure: 10 bar Measurements and Weight: LxWxH: 140 x 45 x 103 cm Weight: 140 kg For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on dimensions and destination.

NEW COOLING TUNNELS BY BAK-TEC for bread, buns, croissant, puff pastry, fish, meat an all other foods etc. available with PVC-belt or stainless steel mesh belt Example: BTI-K 400 -- Working width: 400 mm -- Infeed: 1000 mm -- Outfeed: 1000 mm -- Cooling chamber: 6000 mm -- COPELAND cooling unit 3HP -- complete in stainless steel -- Belt speed: 0-3 m/min. -- Variable speed with inverter -- Belt specification: Food grade PU belt -- Cooling temperature: 0-10 °C -- German CE-confirmation -- 1 year warranty -- with manual book in German / English -- OPTION: -- suitable 400 mm Enrobing machine -- Inspection / Test run and delivery with startup on request -- Leasing business possible -- Publicity prices for SÜDBACK fair 2016 -- Already working for large factories in Germany

4st. DAUB oven THERMO-ROLLING type RDTO 08.12,5.10 SX02 ofen for 20 tins usable total area 9.60 m and 178 4 ofen Totally total area 38.40 m and 178 - 80tins stove is in very good state general and thorough outdated and checked. functions as anew. very good steam. secondary circulation for the baking chamber. turbo-equipment. everything maagnetic pumps incl. Daub Thermooel-boiler arrangement including. 8 stuck anew stikkenwagen sales incl. cargo and assembly price on inquiry

Load 6000 kg, pneumat. Drive

1 of used wrap-around /traypacker, make ZVT (KHS), type Innopack WP 030 VH. New 2000. Operating side; left. Capacity upto 30 cartons/trays per minute (depending on product and blank dimensions). Siemens S7 PLC with OP 17, Indramat Servos, Nordson hot-melt unit. Wired for 400V / 50 Hz. Used for packing various 330 ml upto 2.000 ml glass and PET bottles as 8/12/20/24 on tray or in full wrap-around cartons. Last used as tray-packer only. Various manuals available. Condition: good. Dismantled and available cleaned ex-warehouse The Netherlands.

PlateDriver Compact; good condition; maintained and checked by customer service; new pressure rollers; Violet Laser 60 mw Laser; with computer and software; Min. Plate size 340x400mm, max.615x745mm; Printing plate staerke 015-0.30mm; Dislocation 2540dpi; Machine is transport-secured; with development machine Heights Inca P 70 Y.O.; cleaned and checked; Ready. At this point we allow ourselves to note that all offered machines are in our unrestricted possession or access and are present in our warehouse. Visits and demonstrations are possible on request in our premises. We would also be pleased to inform you about our complete stock, as only part of our portfolio is presented here.

Eria Pompe Pacco Type: One 80-2/AA.T34 No.: 5930 Transmission: Spaggiari Transmissioni Type: RM 100/1 No.: 101730/99 Macdonald: Ercole Marelli Power: 9.2 kW Condition very good Dimensions: LWH = 2200 x 400 x 570 mm

Solid stainless steel case Transmission: Motovario speed controlled 190/1000 min-1 Type: TKR/100 Engine: Ercole Marelli Power: 7.5 kW, approx. 5 t / h 380 V good condition Dimensions: LWH = 2000 x 400 x 550 mm Weight: approx. 4100 kg

Ex Center screw pump stainless steel Manufacturer: CSF inox Stator: Diameter 120 mm Statorlänge: 240 mm Transmission: Motovario No.: 88232123 Type: MKM/4 / 50 40-210 min-1 Engine: ABB motors LKeistung: 4 kW 1000 kg / h Dimensions: LWH = 1800 x 400 x 500 mm Weight: 300 kg good condition

Indramat modul TVD 1.2-08-03 Bosch Rexroth

Ex Center screw pump stainless steel Manufacturer: CSF inox Statordurchmesser: 140 mm Statorlänge: 290 mm Transmission: Motovario (Italy) No.: 8816900 Type: TK 100 190-1000 min-1 Engine: Ercole Marelli (Italy) 380 V, 50 Hz, 7.5 kW Dimensions: LWH = 2300 x 460 x 600 mm Weight: approx. 400 kg Condition very good

Indramat Module DKC043-040-7-FW Bosch Rexroth

Indramat network module NAM 1.2-08 Bosch Rexroth

Indramat module NFD 02.2-480-016 Bosch Rexroth

Ex Center screw pump in stainless steel Manufacturer: CSF inox Transmission: Motovario (speed controlled) Type: TK 100 Engine: Leroy Somer 380 V, 50 Hz, power: 9kW n = 144 min-1 Stator diameter: 160 mm Stator length: 390 mm good condition Dimensions: LWH = 2600 x 450 x 600 mm Weight: approx. 500 kg

Ex Center screw pump stainless steel Manufacturer: CSF inox Transmission: Motovario Type: TK 100 N1-n2 = 190-1000 min-1 Motor: ASEA Power: 9 kW 380 V Stator diameter: 140 mm Stator length: 600 mm good condition Dimensions: LWH = 2500 x 460 x 660mm Weight: approx. 400 kg

Indramat modul NFD 02.1-480-008 Bosch Rexroth

Ex Center screw pump stainless steel Manufacturer: CSF inox Getirebe: Lenze Germany Type: 11.331.31.25.4 / 8829 N1-n2 = 107-556 min-1 No: 8/1206/519 Engine type: 180 M / 4 K2465 380 V, 50 Hz Power: 18.5 kW 1460 RPM Stator diameter: 170 mm Stator length: 790 mm Dimensions: LWH = 2900 x 460 x 1000 mm Weight: 600 kg

Indramat modul TDA 1.1-050-3-A00 Bosch Rexroth

Indramat modul TVD 1.3-08-03 Bosch Rexroth

2pcs. DAUB oven THERMO-ROLL type RDTO 08.12,5.10 SX02 or 10.12,5.10 SX02 A furnace for 20 sheets Oven is in very good condition, General and thorough overhauled. Works like new. A good steam. Secondary circuit for the baking Chamber. Turbo equipment. All maagnetic pump incl. daub thermal oil boiler system with magnetic pump including. 4 piece rack new Sales including freight and installation upon request I also have to sale 2pcs. DAUB oven THERMO-ROLL type RDTO 08.12,5.7 (7 Edition, high shelves)

see photos, 2 stubs