127,338 used machines on RESALE, but how to find them? Machine Search
Interroll Rising falling Incline belt conveyor with leading belt GF (810+175+2800+890)-690-580 RA2362 Technical data: Conveyor length (NL): 4675 mm ( 810 + 175 mm arch + 2800 mm riser segment + 890 mm leading ) frame width (NB): 690 mm belt width (GuB): 6580 mm Overall height (BH): 120 mm, 360 mm with motor Angle: 15° Supporting feet: optionally available Conveying speed (v m/s): 0.6 Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 0,55 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2022 condition: Ausstellungsstück Conveying length in mm: 4675 (810+175+2800+890) Nominal / outside width in mm: 690 Belt ...
Used spiral mixer DIOSNA, type: SP 180 A -in very nice condition- - Including 5 tank cars - Kettle for 180 kg dough or approx. 110 kg flour - With plastic hood and inlet for ingredients - the upper V-belt is NEW - In some cases, the wheels of the tank cars were renewed - Machine and boiler frame repainted - The machine runs very smoothly (a video can be sent) - the hydraulics are in good condition - The machine is perfect for sourdoughs - The machine has been technically completely tested - Condition: very good, ready for immediate use 3 pieces of the 5 boilers have some very fine hairline cracks. In our opinion, however, a repair is not necessary. However, these boilers can also be welded on request. The other 2 boilers are in very good condition and without cracks. We are happy to send you more information and photos. Viewing and test run are possible by arrangement. ...
CLAMPING FORCE: 150TON PLATEN SIZES: 1295 X 990 DBTB: ROTARY TABLE 1520 MIN MOULD HEIGHT: 300 MOULD OPENING STROKE: 400MM MAX DAYLIGHT: 700MM SCREW DIAMETER: 40MM INJECTION PRESSURE: 2678BAR STROKE VOLUME: 283CM3 SHOT WEIGHT (P/S): 257GR CONTROLS: UNILOG B6 MOTOR: 22KW HEATING CAPACITY: 12.1KW SCREW DRIVE: HYDRAULIC CORE PULLING: 4 AIR VALVES: 1 HOT RUNNER: 8 ZONE INTERGRATED ADDITIONAL: HORIZONAL INJECTION VERTICAL CLAMP
A Heuft empty bottle inspector is available. Inspection areas: base/foot/sidewall/finish ring/underchip/finish, sensors: infrared, image processing system: Heuft reflexx, performance range: 5000-50000bottles/h, machine dimensions X/Y/Z: approx. 2050mm/1000mm/1850mm, weight: approx. 1600kg. Documentation available. An on-site inspection is possible.
Injector Model: BI 204 C Manufacturer: Inject star Stainless steel Power: 9kW Voltage: 3 x 400V/ 50Hz
Manufacturer: NanoFocus Model: Usprint 3D Inspection System with Bauman Year of Manufacture: 2014 Condition : Excellent Control Operation Voltage: 24 / 400 V Nominal Current: 17.3 A Electricity Type: 3-phase Frequency: 50 Hz Compressed Air: 6 bar Supply Line Fuse: 25 A (slow-blow), 16 A (fast-acting) Nominal Power: 4.6 kW CE Marked Find more here - / Contact us at -
General SKU200W001 MakeHPV TypeDish LPD liquid processing unit No.1200-0708/2008 Year of construction2008 LocationBarneveld Main Features MaterialStainless steel Motor5.5 KW Specified Features - Inline mixer Capacity18,0 t/h of final product MaterialStainless steel 1.4435 (316L) Information Floorspace6,4x2,35 m Total height2,6 m Weight3500 kg CEcheck Extra Specificationsperfume, aroma, mixing skid The LLPD mixing machine is designed for continuous mixing of the final product and its accumulation for subsequent pumping into final packaging. The machine is capable of producing various modifications of the final product (FP) in 10 perfume variants and different color spectra available within the capacity ranges of dye dosing systems. Qualified reblend (RB) can be added to FP during normal production within the dosing capacity range. The LLPD mixing machine consists of: ...
General SKU251M192 LocationBarneveld MakeFluko - Fluid Kotthoff GmbH Essen TypeDMS 3,2/25-20 No.14078-02 Main Features MaterialStainless steel Motor11 KW Rotor150 mm Specified Features - Inline mixer Continuous reactorIn-line dispersing machine (1x) Rotor sizesdia. 150mm Inletdia. 50mm Outletdia. 50mm Motor11,0 KW, 400/690 Volt Rotor speed2930 Rpm MaterialStainless steel 1.4571 (316Ti) Information Year of construction2005 Floorspace1,1x0,5 M Total height0,7 M Weight240 KGInline high shear mixersFlukoMixers > Inline high shear mixersBrand > Fluko What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!
General SKU212X066 LocationBarneveld MakeArde - Barinco TypeD6000 Main Features MaterialStainless steel Motor3 KW Rotor90 mm Specified Features - Inline mixer Continuous reactorcheck Rotor sizesDia. 90 mm InletDN200 Number of stages:1 Capacityapprox 20-285 ltr/min Motor3 kW, 400 volt, 1800 rpm With variable speed drivecheck With frequency controllercheck With vesselHopper Vessel sizes600x800x600 mm MaterialStainless steel 1.4401 (316) With jacketcheck General No.2182 Year of construction2001 Mounted on framecheck Mounted on wheelscheck With switchgearcheck Floorspace1,40x0,90 m Total height2,10 m Weight380 kg Extra SpecificationsWith vibro motor, 0,35 kW, 220-240/380-415 volt, 1500 rpm.infeed screw conveyor, screw dia. 125 mm,&:nbsp:diaphragma pumpInline high shear mixersArde-BarincoMixers > Inline high shear mixersBrand > Arde-Barinco What you can expect ...
Indramat Indramat DDS02.1 - W150 - DA01 - 01 - FW
Costarelli inclined Conveyor Belt, Sturdy and reliable construction, Dimensions 5.300 x 950 mm, adjustable height (now loading 500 - discharging 1.600 mm), 1,5 kw motor, PVC carpet with drive lugs, 800 mm pitch, 200 mm roller diameter, 650 mm sidewall height, Constructed in 2001, very good working conditions, working width: 950 mm wide x 5,3 mt.long, conditions: used, checked, type: inclined
Indramat Indramat 093B-0GS-3-C/110-B-0/S001
General SKU292X391 LocationBarneveld CEcheck MakeNetzsch TypePSI Mix Main Features MaterialStainless steel Volume15000 Ltr. Motor45 KW Specified Features - Inline mixer MaterialStainless steel 1.4829, Stainless steel 1.4301 (304) Inline high shear mixers Mixercheck CapacityUp to 5 m³/h Information No.2401393 Year of construction2005 Floor space1,90x1,60 m Total height2,20 m Weight2500 kg ATEX compatiblecheck Extra SpecificationsWith rotation valve, 29 rpm, Bartec control, type BAT 300, (Ex), : Burgmann refill unit, type spn2063, in and output: DN80 control cabinet (as is) Inline high shear mixersNetzschMixers > Inline high shear mixersBrand > Netzsch What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The ...
Brand: Videojet Type: Inkt Jet Marking Machine Model: Excel 2000
Height 1920 mm Width 650 mm Length 1750 mm Electrical Supply: 400V 50Hz 3N Total power 4 kW Main Material Stainless Steel, Acid Resistant Number of needles 60 pcs. Number of heads Single head Needle diameter 3 mm Working belt width 345 mm Belt feed adjustment Yes Injection pressure adjustment Yes Tape type made of plastic
This SUMITOMO SHI DEMAG Intelect 2 50/370-110 was manufactured in 2020. It features a fully electric direct-drive system, NC5+ control for enhanced energy efficiency, and precise injection dynamics. Includes a granule dryer, industrial robot, conveyor belt, and temperature units. Ideal for high-quality injection moulding processes. Contact us for more information about this machine.
Manufacturer: Engel Model: Insert 80H/35 – Vertical Type: Vertical injection moulding machine Year of manufacture: 2007 Operating hours: 22404 Closing force: 35 t Screw diameter: 18 mm Max. injection volume: 25.4 cm3 Fixing plate: D1200 mm / 560 x 430 mm Machine weight: 6.1 t Find more here - / Contact us at -
PET Coextrusion + Inline ILLIG RDKP72g Thermoforming Line, Age 2010, this equipment is suitable for PET, PP & PS Trays, Fruit & Vegetable baskets etc. :-, Inline S Plastic SRL PET Coextrusion line to produce pet sheet in-line with ILLIG RDKP72g 4-Station Thermoformer (hole punch station) Age 2010 :, Maximum output 680 kg/ hr, Maximum sheet width 800 mm, The line was originally purchased for €1.8 million., The line includes:, Electrical Control Panel, MSM Plastic Engineering Gravimetric Feeder, fed directly from the PET Dryer + additional Component for masterbatch or additive, Main extruder Model ED 100-40 dia. Ø100 mm, L/D 40, BP Plast BDO X2 100 Double plate hydraulic screen changer, MAAG Gear pump, Co-extruder Model E60-40 dia. Ø60 mm, L/D 40 with Gravimetric feeder, BP Plast Single plate hydraulic screen changer, MAAG Gear pump, 3- Layer (ABA) Melt Feed Adapter, Special extrusion ...
Technical data Year of Make: 2007 Closing page Clamping force: 1300 t Opening distance/installation height max. : 2300 mm Max. spacing of the clamping plates: 4000 mm Tool installation height min./max. : 1000 - 1700 mm Clamping plate max. Height: 1910 mm Min. tool size: 1000 - 1700 mm Lights spar spacing: 1500 mm Nozzle radius: R40 mm Tool weight: 29000 kg Ejector stroke: 350 mm Splash side Screw diameter: 135 mm Displacement: 8588 cc Core Cables AWS/DS: 1/1 Needle gate tire. : 1 Machine is delivered with Kuka robot and can be viewed in production.
General SKU288X384 MakeIka Werke TypeMHD 2000/05-ATEX No.200023306 Year of construction2020 Mounted on framecheck Main Features MaterialStainless steel Motor7.5 KW Rotor60 mm Specified Features - Inline mixer Continuous reactorcheck Rotor sizesDia. 60x150 mm InletDN50 OutletDN32 Number of stages:2 Capacity700 l/h Motor7,5 kW, 400/690 volt, 2910 rpm, (Ex) Rotor speed6000 rpm MaterialStainless steel 1.4306 (304L) With jacketcheck General LocationBarneveld Floorspace0,70x0,40 m Total height1,20 m CEcheck ATEX designedcheck Extra SpecificationsTotal cap. 700 l/h, solids cap. Max 500 l/h.Inline high shear mixersIKA WerkeMixers > Inline high shear mixersBrand > IKA Werke What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine ...
General SKU376X935 MakeBecomix LocationBarneveld CEcheck TypeDH-500 Motor Motor power8 kiloWatt Main Features MaterialStainless steel Motor8 KW Inlet diameter50 mm Specified Features - Inline mixer Colloid millcheck Emulsifiercheck Rotor sizesDia 245 x 40 mm Teethed rotorcheck Without hoppercheck Inlet25 mm and 50 mm Outlet50 mm With mechanical sealcheck Motor8 kW (400 V, 2950 rpm) With variable speed drive(freq controller) Speed2910 rpm. With jacketcheck Inline high shear mixers MaterialStainless steel 1.4306 (304L) General No.070/4-N0003 Year of construction2010 Mounted on framecheck Mounted on wheelscheck With switchgearcheck Floorspace0,6 x 1 m Total height1 m Weight250 kg Extra Specifications:in-line: colloid-millInline high shear mixersBecomixMixers > Inline high shear mixersBrand > Becomix What you can expect from Foeth: -- Machine is in workin ...
General SKU350W925 LocationBarneveld Pressure Working pressure3 Bar Main Features MaterialStainless steel Motor19 KW Rotor130 mm Specified Features - Inline mixer Continuous reactorcheck Rotor sizesDia. 130 x 50 mm Inlet80 mm Outlet25 mm With mechanical sealcheck Motor16,5/19 kW, 400 volt, 1460/2930 rpm MaterialStainless steel Information MakeBecomix Year of constructionUnknown Mounted on framecheck Floorspace0,50 x 0,90 m Total height0,80 m Weight300 kg Extra Specifications- With input hose Inline high shear mixersBecomixMixers > Inline high shear mixersBrand > Becomix What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!
General SKU251M191 LocationBarneveld MakeFluko - Fluid Kotthoff GmbH Essen TypeDMS 3,2/50-20 No.14078-01 Main Features MaterialStainless steel Motor45 KW Rotor150 mm Specified Features - Inline mixer Continuous reactorIn-line dispersing machine (1x) Rotor sizesdia. 150mm Inletdia. 80mm Outletdia. 80mm Motor45,0 KW, 400/690 Volt Rotor speed2960 Rpm MaterialStainless steel 1.4571 (316Ti) Information Year of construction2005 Floorspace1,4x0,8 M Total height0,8 M Weight500 KGInline high shear mixersFlukoMixers > Inline high shear mixersBrand > Fluko What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!
Indramat Indramat DDS02.1-W150-DA01-01-FW
General SKU058C219 TypeFM342D LocationBarneveld Main Features MaterialStainless steel Motor15 KW Specified Features - Inline mixer Inlet70 mm Outlet40 mm Motor15KW, 380 volt Information Floorspace1,1 x 0.4 m Total height0.5 m Weight280 kgInline high shear mixers-Mixers > Inline high shear mixersBrand > - What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!
General SKU205N026 MakeWaukesha Cherry-Burrell TypeSP4 2009 No.1000002431623 Mounted on framecheck Main Features MaterialStainless steel Motor18.5 KW Rotor80 mm Specified Features - Inline mixer Continuous reactorcheck Rotor sizes+/- dia.80mm Inletdia.47mm Outletdia.47mm Number of stages:1 With mechanical sealcheck Motor18,5 KW, 380/660 Volt Rotor speed2930 Rpm MaterialStainless steel With jacketcheck General LocationBarneveld Floorspace1,4x0,4 M Total height0,7 M Weight300 KGInline high shear mixersWaukeshaMixers > Inline high shear mixersBrand > Waukesha What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!
General SKUR0088 MakeSchröder & Co Machinenfabrik No.33-177 Year of constructionunknown Mounted on framecheck Main Features MaterialStainless steel Motor2.2 KW Rotor90 mm Specified Features - Inline mixer Rotor sizesdia. 90mm Inletdia. 20mm Outletdia. 20mm Motor2,2 kW 230 Volt With frequency controllercheck MaterialStainless steel 1.4401 (316) Inline high shear mixers Inlet20 mm Outlet20 mm Information LocationBarneveld Mounted on wheelscheck With switchgearcheck Floorspace1,1x0,5 M Total height1,6 M Weight220 KgInline high shear mixersSchröderMixers > Inline high shear mixersBrand > Schröder What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many mor ...
General SKU329S526 MakeIndag Maschinenbau GmbH (D) LocationBarneveld CEcheck TypeDLM-1/3 HO (S) Pressure Working pressure6.6 Bar Main Features MaterialStainless steel Motor3 KW Specified Features - Inline mixer Inletdia. 400 mm, dia. 35 mm, Outletdia. 35 mm With jacketcheck Motor3kW 220-240/380-415 Volts With frequency controllercheck Rotor speed400 rpm With vesselcheck Capacity49 Ltr. Vessel sizesdia. 400 x 650 mm With jacket19 Ltr. Max. temperature-10/100 °C MaterialStainless steel 1.4301 (304) With jacketcheck General No.4315 Year of construction2006 Mounted on framecheck With switchgearcheck Floorspace1,8x0,9 M Total height2,5 M Weight450 kg Extra SpecificationsWith boiler: TWA GmBh &:amp: Co. KG, SN: 015-2006-2542, 49 Ltr., max. working pressure: -0.95/4 bar, max. temperature: -10/100 °C, double-walled: 19 Ltr., max. working pressure: 0/4 bar, max ...
General SKU408S978 LocationBarneveld MakeKoruma Maschinenbau GmbH (D) TypeDisho In-Line 0/100 Main Features MaterialStainless steel Motor5.5 KW Inlet diameter32 mm Rotor100 mm Specified Features - Inline mixer Continuous reactorIn Line Dispersing and Homogenising Rotor sizesdia. 100 InletDN32 OutletDN32 With mechanical sealcheck Motor5,5 kW 400 Volt Rotor speed2885 rpm With vesselcheck Capacity40 ltr. Vessel sizesdia. 390x400mm with stirrer 0,55 kW 230/400 Volt 309-1539 rpm MaterialStainless steel 1.4571 (316Ti) Inline high shear mixers InletDN32 OutletDN32 With mechanical sealcheck Motor5,5 kW 400 Volt Speed2885 rpm With propellor stirrercheck Motor0,55 kW 230/400 Volt With variable speed drivecheck Speed309-1539 rpm Information No.5389 Year of construction1995 Mounted on framecheck With switchcheck Floorspace1,2x0,6 M Total height1,7 M Weight200 ...
An empty bottle inspection machine Heuft including a pre-sorting unit Heuft Spectrum SX TB 72 and Gateway II is available. Inspector: rated throughput: 72000bottles/h, bottle types: Ale/NRW/Euro/Krombacher swing top/swing top, bottle colors: green/brown/clear, closure types: crown cap/screw cap/embossing, bottle volume: 330ml/500ml, pre-sorting: bottle type/bottle height, inspection types: sidewall/finish/thread/base/residual liquid/labels/test bottles. Including defective bottle reject systems and infeed and outfeed conveyor. Documentation available. An on-site inspection is possible.
CS 2500-KF PLUS – Industrial Roasters for Nuts, Seeds & Snacks, The robust Ceselsan CS 2500-KF PLUS is a versatile continuous rojust furnace for the industrial processing of nuts, kernels, seeds, dried fruits and snack products. The system offers uniform heat distribution over multiple zones and enables precise control of temperature, product thickness and belt speed – ideal for reproducible product quality., Bandwidth: approx. 860mm, Insertion funnel width: approx.: 860x600 mm, With dragger kettle for salting or seasoning the products to be roasted Type TZM 150 (150 liters). This doses the products in the roaster after mixing., Diameter of the filling opening: about 600 mm,, Only about 30 operating hours., Information from the operating manual of the machine:, Technical specifications, - Dimensions: 3.636 × 1.946 × 2.000 mm, - gas heated, - Electrical consumption:, - Installed pow ...
4x Muller Martini Grapha Progress printing cassettes, pitch 1/3 with perforating cilinder. In very good condition available immediately.
Inductive sensor, electronic sensor, safety switch, inductive proximity switch -Manufacturer: efector, Inductive sensor proximity switch, unused, original packaging -Product Type: IN-3004-BPKG / IN5129 -Quantity: 1 sensor available -Price: per piece -Cardboard dimensions: 150/125/H30 mm -Weight: 0.1 kg/carton
Indexable insert drills, high performance drills with indexable inserts, solid drills, end mills, end mills, milling cutters, indexable insert mills, end mills with internal cooling, indexable insert end mills -Finger milling cutters: indexable insert end mills with internal cooling, 8 pieces -Receptacle: Ø 32 mm -Diameter: 32 to 43 mm, see photos / parts list -Levy/Price: complete -Transport dimensions: 400/200/H60 mm -Weight: 8.7kg
Indexable insert drills, high performance drills with indexable inserts, solid drills, end mills, end mills, milling cutters, indexable insert mills, end mills with internal cooling, indexable insert end mills -Finger milling cutter: indexable insert end mill with internal cooling, 2 pieces -Receptacle: Ø 25 mm -Diameter: 25 and 30 mm -Levy/Price: complete -Transport dimensions: 210/70/H40 mm -Weight: 1.0kg
Indexable insert drills, high performance drills with indexable inserts, solid drills, end mills, end mills, milling cutters, indexable insert mills, end mills with internal cooling, indexable insert end mills -Handover: in current condition as seen -Reversible plate: 1 piece missing -Finger milling cutter: indexable insert end mill with internal cooling -Receptacle: Ø 30 mm -Diameter: 16mm -Dimension: 133/40/H40 mm -Weight: 0.4kg
Digital input module 16x24V DC 3ms PS416-INP-400 -Supply voltage: DC 24 ... 24V -Supply voltage type: DC -Number of digital inputs: 16 -Number of digital outputs: 0 -Input current with signal: 1 8.6mA -Permissible input voltage: -3 ... 30.2V -Type of input voltage: DC -Type of digital output: none -Maximum permissible voltage at the output: 0V -Electrical connection type: Plug connector -Delay time during signal change: 3 ... 3ms Explosion protection category: PS416-INP-400 -Weight: 0.2 kg
Ref. no.: 18597 Manufacturer: ENGEL Year of construction: 2007 Clamping unit Clamping force: 70 ton Opening stroke: 305 mm Injection unit Screw diameter: 25 mm Injection volume: 69 cm³ Shot weight: 62 g Injection pressure: 2381 bar Measurements and weight Dimensions: 4,0 x 1,8 x 2,5 m Machine weight: 5600 kg Further information: The ENGEL INSERT 200H/70 is a professional vertical injection moulding machine specially designed for insert molding and precision technical plastic applications. Built with ENGEL’s compact and robust machine concept, this model has been widely used for many years in the automotive, electronics, cable technology and technical plastics industries. One of the major advantages of this machine is its rotary table system. This design allows the operator to load inserts on one side while production continues on the other side. As a result, cycle times are reduced an ...
General SKU200W006 LocationBarneveld MakeHPV TypeRV Base SO Main Features MaterialStainless steel Motor7.5 KW Specified Features - Inline mixer Continuous reactorcheck Rotor sizesDia. 75x15 mm Inletdia. 40 mm OutletDia. 30 mm Number of stages:2 Capacity2500l/h Max. temperature160°C With mechanical sealcheck Motor7,5 kw, 400V, (EX) With frequency controllercheck Rotor speed6000 rpm With vesselcheck Capacity2x 600l Vessel sizesDIa. 790x1400 mm With jacketcheck Inline high shear mixers Capacity0,6m³/h With motor1,5kW, 400V, 720rpm (EX) 2x With frequency invertercheck Specified Features - Inline mixer MaterialStainless steel 1.4404 (316L) General No.2002-M-1 Year of construction2013 With switchgear(as is) Floorspace4,0x3,0 m Total height2.5 Extra SpecificationsSkid mounted stainless steel RV base SO.with:IKA, type Dispax-reactor DR2000/5-ATEX, year 2013 ...
- Producer Infastaub - Year of construction 1997 - Type AM 303 - max. volume flow 4.000 m³/h - Blowing nozzle Saugstutzen 250 mm - automatic uprock - Number of Filling tons 1 Stk. - Electric power, Ventilator 2,8 kW - Motoractivity Rockmotor 0,18 kW - Length 950 mm - Height 3.000 mm - Width 1.000 mm - Location am Lager - Voltage / HZ 400/50 - Spannungsschwankungen max. +/- 5 %
Key data: 500 kN
Sumitomo Demag IntElekt 50/370-200 / Electric Machine Year of Make: 2009 Injection unit: Screw diameter: 25 mm Injection weight: 39 g Spray pressure: 1580 bar Dosing volume: 44 ccm Clamping unit: Clamping force: 50 t Tiebar spacing: 370x370 mm Size of the clamping plates: 520x570 mm Ejector: electric Clamping unit: toggle lever Control: NC5 - Touch Screen Additional equipment: Electric machine: high-speed, energy-saving and very quiet Euromap 67 Robot interface Air Valve x 4 Control with hot runners Hardened injection unit - Bimetal Central lubrication It is possible to change the screw diameter Dimensions: Weight: 4750 kg Length/Width/Height: 4.20x1.26x1.84 m Drive: Heating capacity: 5.7 kW All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected m ...
Key data: 1000 kN
Engel Insert 80V/80V/100 2F/2-K Ti-bar-less Machine, Vertical / Perfect Technical Condition Year of Make: 2007 Injection unit: Screw diameter: 2 x 25 mm Injection weight: approx. 49 g Spray pressure: 1214 bar Dosing volume: 54 ccm Clamping unit: Clamping force: 100 t Spar spacing: 0x0 mm Ejector: hydraulic Clamping unit: hydraulic Control: CC 200 Additional equipment: Ti-bar-less machine with two vertical injection units, with turntable Air Valve x 6 Hydraulic core pull x 2 Control with hot runners x 12 Infrared protective curtains Thermoplastic and rubber injection units are available for this machine Rotary table diameter: 1200 mm The machine has been regularly serviced by the authorized service provider Engel in Germany Dimensions: Weight: 9400 kg Length/Width/Height: 4.85x1.47x2.30 m Drive: Pumps/motor: 30 kW Price: On request
General SKU022A121 MakeBran + Luebbe TypeCentrisol MC-50 No.9190756 Year of constructionunknown Mounted on framecheck Main Features MaterialStainless steel Motor7.5 KW Rotor160 mm Specified Features - Inline mixer Continuous reactor(1x) Rotor sizesdia. 160mm, Mixing chamber dia. 200mm Inletdia. 50mm Capacitymax. 500 Ltr/Hr Motor7,5 KW, 400/690 Volt Rotor speed2915 Rpm Electric heating(330 Watt, 220 Volt, Max. 200 Degr. C.) MaterialStainless steel 1.4552 Information LocationBarneveld Floorspace0,6 x 0,4 m Total height1,5 m Weight150 kg Technical specs Extra informationmixing chamber dia. 200 mmInline high shear mixersDiscountBran + LuebbeMixers > Inline high shear mixersDiscountBrand > Bran + Luebbe What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You ar ...
General SKU040Z169 MakeHaagen &: Rinau / Unimix TypeSH-500 No.301166/2 Year of construction2002 LocationBarneveld Main Features MaterialStainless steel Motor22 KW Rotor150 mm Specified Features - Inline mixer Continuous reactor:In-line homogeniser: Rotor sizesø 150 x 150 mm Inlet100 mm Outlet75 mm Number of stages:3 Capacitymax. 36 m³/h With mechanical sealcheck Motor22,0 kW, 400 Volt With frequency controllercheck Rotor speed2900 rpm MaterialStainless steel 1.4306 (304L) With jacketcheck General With switchgear(as is) Floorspace0,8 x 0,5 m Total height0,5 m Weight300 kg CEcheck Extra Specifications- mirror polished rotor and stator- stator with mechanical sealInline high shear mixersDiscountNew arrivalsHaagen & RinauMixers > Inline high shear mixersDiscountNew arrivalsBrand > Haagen & Rinau What you can expect from Foeth: -- Machine is in working conditi ...
Caterpillar C15 - Unused - 475 HP - MCW
Caterpillar C13 - Unused - 440 HP - RRA
General SKU040Z166 MakeKinematica AG CH-6014 Littau TypeMegatron MT 1-90 MF No.M-90123 Year of constructionunknown Mounted on framecheck Main Features MaterialStainless steel Motor7.5 KW Rotor80 mm Specified Features - Inline mixer Continuous reactorInline dispersing processor Rotor sizesø 80 mm, Stator ø 90 mm Inletø 50 mm Outletø 50mm Number of stages:1 With mechanical sealcheck Motor7,5 kW (400V, 2950 rpm (Ex)) With frequency controllercheck Rotor speed6000 rpm MaterialStainless steel 1.4571 (316Ti) Information LocationBarneveld With switchgearcheck(as is) Floorspace0,8 x 0,8 m Total height1,5 m Weight360 kg ATEX compatiblecheckInline high shear mixersDiscountKinematicaMixers > Inline high shear mixersDiscountBrand > Kinematica What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping ...
This empty crate inspection system was built in 2019 by the German manufacturer Indspect. The machine is until October 2025 in running production. Technical data Capacity: Adjustable For the inspection of damage empty crates
maximum number of results exceeded
please refine your search
