133,555 used machines on RESALE, but how to find them? Machine Search
Key data: 4 KW, 230 V
Inverter generator set 4 kW - NEW with electric start and wheelset - Power: 3.2 / 3.5 kW - Voltage: 230 volts - Frequency: 50 Hertz - Inverter technology - Tank capacity: 8.3 liters - Consumption: 0.98 liters / hour (50%) - Dimensions (L/W/H): 59 x 45 x 51 cm - Weight: 45 kg - Socket: 230V 16A - USB port / socket - 12V socket for charging the battery - Overload protection - Low oil level warning - Wheelset and fold-out handle for pulling - Electric - Start and Cable - Start - - - - - Advantages of an inverter generator set: The inverter technology ensures a permanently constant voltage, so that even sensitive devices can be operated without any problems. In addition, the consumption of an inverter generator is up to 30% lower than that of a normal generator set, as the speed automatically adapts to the power consumption. - - - - - Shipping: - Germany-wi ...
Key data: 4 KW, 230 V
Inverter generator set 4 kW - NEW DUAL Fuel - Gasoline / Gas - Power: 4 kW (petrol operation) - Power: 3.8 kW (gas operation) - Voltage: 230 volts - Frequency: 50 Hertz - Inverter technology - Tank capacity: 8.3 liters - Consumption: 1.5 liters/hour (50% load) - Dimensions (L/W/H): 59 x 45 x 51 cm - Weight: 48 kg - Socket: 2x 230V Schuko - USB port / socket - 12V socket for charging the battery - ATS connection - Overload protection - Low oil level warning - Wheelset and fold-out handle for pulling - Electric - Start and Cable - Start - Digital display (volts / hertz / hours / kW) ---> 2 identical inverters can be connected and synchronized to obtain a total output of 8 kW. - - - - - Advantages of an inverter generator set: The inverter technology ensures a permanently constant voltage, so that even sensitive devices can be operated without any problems ...
We offer a paternoster LTG-TowerMax P 13.8-300-46-210-6500 with a completely new StoreControl P control system, which has been modernized by us Exterior Dimensions: Overall height 6,500 mm Overall width 3,670 mm Installation depth 1,560 mm 46 carriers with a payload of 300 kg each in clear usable dimensions: H = 210 mm W = 3,050 mm T = 520 mm Chain jump 254 mm 23 galvanized intermediate floors for 150 kg payload each Total payload up to 13,760 kg Side table in 1000 mm above OKFF with NiRo worktop, 300 mm deep, manually operated lifting door Colour scheme grey/dark grey Motor power drive 1 x 5.5 kW / 400 Volt subject to errors and technical changes, surfaces cleaned, signs of wear and minor deformations possible, Delivery & installation currently mainly in D, A and other neighboring countries
We offer a paternoster LTG-TowerMax P 2.4-120-20-380-4780 with a completely new StoreControl P control system, which has been modernized by us Exterior Dimensions: Overall height 4,780 mm Overall width 3,385 mm Overall depth 1,180 mm 20 carriers with a payload of 120 kg each in clear usable dimensions: H = 380 mm W = 2,950 mm T = 410 mm Chain jump 412 mm 20 galvanized intermediate floors for 55 kg payload each Total payload up to 2,380 kg Side table in 1000 mm above OKFF with wooden worktop, 300 mm deep, manually operated lifting door Colour scheme grey/grey, supporting cases anthracite Motor power drive 1 x 1.8 kW / 400 Volt subject to errors and technical changes, photo of an identical machine, surfaces cleaned, signs of wear and minor deformations possible, Delivery & installation currently mainly in D, A and other neighboring countries
Laminating unit (not complete machines) The machine is used for the coating of a product web with simultaneous Laminating a second goods railway. Products = 200-800my PET with 40-80 my PE Working width max. = 1600 mm, Speed = 70 m / min Approximately 1000 operating hours New price approx. = 400,000 euros) Accessories: 1x Barrel melter 1 x storage unit 50 liter / 86 KW Nozzle
We offer a paternoster LTG-TowerMax P 4.0-165-25-380-5860 with a completely new StoreControl P control system, which has been modernized by us Exterior Dimensions: Overall height 5,860 mm Overall width 2,940 mm Overall depth 1,180 mm 25 carriers with a payload of 165 kg each in clear usable dimensions: H = 380 mm W = 2,500 mm T = 410 mm Chain jump 412 mm Total payload up to 4,125 kg 1000 mm side table above OKFF with rubberized worktop, 300 mm deep, manually operated lifting door, Brown/n-grey colouring, grey straps Motor power drive 1 x 1.8 kW / 400 Volt subject to errors and technical changes, photo of an identical machine, surfaces cleaned, signs of wear and minor deformations possible, Delivery & installation currently mainly in D, A and other neighboring countries
Qty. 1 Second-hand crank hot forging press – dismantled & in storage Mfc.: Hyunjin Industry, Korea Built: 2008 Status: dismantled and in storage Force: 2500 T Total weight of the machinery: approx. 250 T
Used JMC 407 Kat Alligator Scissors Alligator scissors JMC 407Cat The catalyst version JMC 407 has an additional "V-holder" in the cutting area for adjustment when cutting or opening the catalysts. In stock at the end of March 2021 Knife length: 407 mm Measuring opening: 250 mm Cutting capacity: 90 tons Round iron ST 37: 57 mm diameter Number of strokes at 1/4 opening: 63 / min Number of strokes at full opening: 11 / min Dimensions (L x W x H): 1550 x 880 x 1120 mm Weight: 880 kg Drive: 7.5 kw / 380 V Operation: Foot pedal
Offer coupling with the part. 402064 for sale.
TO WHOM IT MAY CONCERN ; WE VE RECONDED AIR STARTING MOTOR INGERSOLL RAND SS815R ( 4W 5107 ) FOR CAT 3512 ENGINE MODEL SS815R / CAT NO 4W 5107 SERIAL NO SP010524028 MAX PRESS 150 PSI READY TO SHIPMENT IF YOU VE ANY FURTHER QUESTIONS PLS DO NOT HESITATE TO CONTACT WITH US . Capt. Ayhan Ugurluba With Kind Regards ; Aliaga Marine Services E mail: info/aliagamarine.com Phn/Fax:+90 232 618 03 90 Mobile: +905556084850 aliagamarine.com TURKEY
REF-0 INVIA DCOM/3 DIATOMACEOUS EARTH FILTER Brand: InVIA Model: DCOM/3 Year: 2013 Mobile diatomaceous earth filter (kieselguhr filter) with manual backwash. Suitable for the initial filtration and clarification of wine, beer and liquid food products. All AISI 304 stainless steel. Filtering process through horizontal discs. Equipped with a built-in dosing system with electric pump and flowmeter. GAMAR diaphragm dosing pump (0.3 kW) EBARA recirculation pump (2.2 kW) Installed power: 2.5 kW Voltage: 400 V/50 Hz Filtering surface: 3 m2 Max. capacity: 8,000 l/h Max. pressure: 6 bar Operating temperature: 0 - 80 °C Overall dimensions (mm): 1,200 x 650 x 1,500 (LxWxH) Weight: approx. 210 kg
FOM INDUSTRIE profile machining center was built in 2009 by F.O.M. INDUSTRIE s.r.l. This machine, designed for precision machining of PVC profiles, is an excellent choice for businesses specialising in the manufacture of windows. It enables, among others, milling, cutting or making ventilation and holes for the handle. Window profiles are machined by means of various types of aggregates. The standard machine in this series has 14 aggregates, however, the machine in our offer has been equipped with additional milling and drilling aggregates and has a total of 18 of them. This solution significantly increases the machining capacity of the machine as well as the overall machining efficiency. The FOM INDUSTRIE PVC profile machining center is also extremely easy to operate. All machining parameters are programmed in the intuitive CNC control with graphic software. Technical specifications ...
BARCODE PRINTER / LABEL PRINTER CAB A4 + Equipment / Additional information: Printer method: thermal transfer / thermal direct Resolution: 203 dpi, 300 dpi or 600 dpi Print speed: 200 mm / sec (203 dpi), 152 mm / sec (300 dpi) Maximum print width: 116 mm Interfaces: USB 2.0, RS232, Ethernet 10/100 Base T, 2x USB master interface, slot for CompactFlash memory card
Maximum diameter to turn on the bench 2,110 mm Maximum diameter to turn on trolley 1,600 mm Maximum distance between platforms 12,830 mm Spindle hole diameter 155 mm Cone on spindle no. 120 metric Cone on spindle (with reduction) no. 6 clamps Cone on the counterpoint (6-bit reduction) no. 120 metrics Maximum stroke of the counterpoint 400 mm DSeed from the tool support plane to the axis of the 80 mm centers Main engine power 100 HP Spindle speed from 0.9 to 90 rpm with continuous variation Longitudinal feed no. 36: 0.2 to 12.8 Transverse advances No. 36: 0.1 to 6.6 Metric fillets #26: 1 to 42 Whitwoth fillets #17: 0.5 to 11 Quick forwards Maximum permissible load on the tips 50-60 ton Refrigerant liquid system
Servo drive, servo card, output module, CPU card, input processor, power supply unit, control card, input card, controller, converter, controller -Indramat: AC Servo Line Former NAM 1.2-08 -Component: from a DMT CD 480 lathe -Dimensions: 320/105/H390 mm -Weight: 12.9 kg
Peak height 2,600 mm Point distance 10,000 mm Closed bench 2,000x6,000 mm To be completed with CNC
Servo drive, servo card, output module, CPU card, input processor, power supply unit, control card, input card, controller, converter, controller -Indramat: AC Servo Controller MOD13/1X0021-008 -Contr: TD M3 ..- 020-300-WO -Component: from a DMT CD 480 lathe -Dimensions: 320/70/H390 mm -Weight: 6.5 kg
Conveyor belt rollers, transport rollers, spare rollers, conveyor belt, roller conveyor, carrier rollers -Diameter roller: 40 mm -Admission: M10 -Price: per piece -Number: 2 pieces -Minimum purchase: complete -Dimension: Ø 40 x 700 mm -Weight: 1.3 kg/piece
Contactor, contactor, power contactor, spool -Manufacturer: Intrometic, coil 4 valve -Dimension: Ø 28 x 127 mm -Weight: 0.2 kg
Contactor, contactor, power contactor, spool -Manufacturer: Intrometic, Sp 1 Geber -Dimension: Ø 28 x 127 mm -Weight: 0.3 kg
Upright longitudinal stroke (X): 10300 mm Vertical head stroke (Y): 3000 mm RAM Stroke (W): 1150 mm Spindle Stroke (Z) - Iso 50: 800 mm Total spindle stroke (W+Z): 1950 mm RAM section: 420x500 mm Ø spindle: 150 mm Spindle engine power: 63 kW Spindle speed (no. 2 ranges): 10÷2800 rpm Work progress: 0÷6000 mm/min Fast forwards: 15000 mm/min CNC Siemens Sinumerik 880 M Year of review: 2005 Reassing machine complete with: No. 1 SWIP INNSE PMFC 1200: 2500x2000, 25 ton Head warehouse: 6 seats Makeup evacuator
Conveyor belt rollers, transport rollers, spare rollers, conveyor belt, roller conveyor, carrier rollers -Diameter roller: 60 mm -Admission: M10 -Price: per piece -Number: 2 pieces -Dimension: Ø 60 x 700 mm -Weight: 2.1 kg/piece
completely stainless steel loaded : 50 to 55% 3.7 kW with vacuum pump with filters Dimensions (L x W x H): ± 2,300 x 1,700 x 1,800 mm
complete screw and barrel dia. 45 mm for Battenfeld /1000 injection moulding machine is good condition
max. workpiece length: 3200/5100 mm profile spindle: 1 Stück main drive: 12 kW Control: Beckhoff CNC Number of axles: 5 St. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
axis stroke (X,Y,Z): 3950,2145,555 mm Number of spindle head vertical: 13 St. Number of spindles head horizontal: 6 St. Number of tools: 22 St. Number of milling agregates: 1 St. working dimensions: 3200x2000x200 mm Motor output: 12 kW Control: Beckhoff CNC Number of axles: 5 St. Masterwood Project 385 CNC-Bearbeitungszentrum --------------------------------------------- 5-Achs CNC-Bearbeitungszentrum in Auslegerbauweise (dadurch sehr große PLatten auflegbar) für Innenausbau, Plattenbearbeitungen aller Art. Kurze Zusammenfassung: --------------------------------------------- Verfahrwege X = 3950 mm, Y = 2145 mm, Z = 555 mm Arbeitsbereich: X = 3200 mm, Y = 2000 mm, Z = 200 mm 1 Stk. 5-Achs-Hochleistungsspindel, 12 kW, mit HSK 63 F Aufnahme 1 Stk. fest installierter Bohrkopf mit 19 Spindeln mit 7 einzeln abrufbaren Vertikalbohrspindeln X-Richtung mit 6 einzeln abrufbaren Vertikalbohrspin ...
Frequency converter, frequency converter, drive converter, controller, variable speed drive -Indramat: CLM 01.3-X-0-2-B module -Item: 245551-07026 -Price: per piece -Number: 2 pieces -Dimensions: 390/105/H325 mm -Weight: 6.2 kg/piece
Servo drive, servo card, output module, CPU card, input processor, power supply, control card, input card, controller, converter, controller -Indramat: AC servo controller -MOD: 1/11919-002 -Art.: 234500-14530 - Quantity: 1 piece -Dimensions: 390/105/H325 mm -Weight: 8.2kg
Rolling bearings, ball bearings, SKF bearings, SKF, self-aligning bearings, roller bearings, needle bearings -Needle bearing: roller bearing -Inside: Ø 320 mm -Outer: Ø 359 mm -Width: 175 mm -Weight: 19 kg
power capacity: 0 kW tool adaptor: 0 total power requirement: 0 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
optical angel measuring unit. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
power capacity: 0 kW volt: 0 V ampere: 0 A Data please see typeplate. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
power capacity: 0 kW volt: 0 V ampere: 0 A Data please see typeplate. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
The JMC 150 has a mechanically adjustable hold-down. The scissor head is operated with a foot pedal for individual cuts or continuous cutting. The scissor head is protected with a safety basket. The JMC 150 is a tabletop unit for easy handling. Manufacturer: Mc Intyre Knife length: 150 mm Measuring opening: 105 mm Cutting capacity: 25 tons Round iron ST 37: 25 mm diameter Number of strokes at 1/4 aperture: 20 / min Number of strokes at 1/2 opening: 12 / min Number of strokes at full opening: 9 / min Dimensions ( L x W x H ): 660 x 520 x 620 mm Weight: 150 kg Drive: 1.5 kw / 230 Volt Operation: Foot pedal
JMC 900 alligator shears (new machine) The JMC 900 has a hydraulic hold-down. The scissor head is operated with a foot pedal for individual cuts or continuous cutting. The scissor head is protected with a safety basket. Out of stock Delivery time: On request Manufacturer: Mc Intyre Knife length: 920 mm Measuring opening: 473 mm Cutting capacity: 233 tons Round iron ST 37: 88 mm diameter Number of strokes at 1/4 aperture: 26 / min Number of strokes at full opening: 9 / min Dimensions ( L x W x H ): 3200 x 1030 x 1800 mm Weight: 4400 kg Drive: 18.5 kw / 400 V + 1.5 kw electric motor cooler Operation: Foot pedal
Machine type: Tumbler Manufacturer: Inject Star Model: Tumbler 2200 liter Setting total time Frequency speed control Automatic unloading Vacuum 0-95% Vacuum system filter Machine dimensions in cm: 170x285x190cm Electrical power: 4.5kW
Vertical tank made of stainless steel with a useful capacity of 500 liters. Klopper top bottom with manual opening man's mouth with manual closures, collector with threaded junctions and camlock type load connection Conical bottom with discharge valve. With 4 legs mounted on stainless steel structure with rails for mobility by bull or pallet truck. General characteristics: Maker INOXGUER Material Stainless steel Year of manufacture 1999 Design pressure 0.9 kg/cm2 Test pressure 1.35 kg/cm2 Specifications: Volume 500 l (useful) Background type Sup. klopper - Conical Inf. Envelope Structure 800X860 mm Outer diameter body 810 mm Body height 1050 mm
Three Roll Calender Manufacturer Iddon Bros. ‘I’ shape stack vertical Roll width 54” (1350mm) x 22” (550mm) diam. Even speed Rotary joints for steam heated rolls for water cooling Electrical speed controls with electric autostop Motorised roll stack at the end of the Calender Complete with gearbox, 45kW motor and starter panel The Calendar runs well and goes down to .8mm thick The Calender is mounted on a one-piece fabricated bed plate
Transformer, converter, inverter, three-phase autotransformer -Indramat: Transformer DST/S 2.5 -Primary: 440/415/380 V -Secondary: 220 V - 10.5 A -Power: 2.5 kVA -Dimensions: 235/120/230 mm -Weight: 15 kg
Vertical tank made of stainless steel with a useful capacity of 500 liters. Klopper top bottom with manual opening man's mouth with manual closures, collector with threaded junctions and camlock type load connection Conical bottom with discharge valve. With 4 legs mounted on stainless steel structure with rails for mobility by bull or pallet truck. General characteristics: Maker INOXGUER Material Stainless steel Year of manufacture 1999 Design pressure 0.9 kg/cm2 Test pressure 1.35 kg/cm2 Specifications: Volume 500 l (useful) Background type Sup. klopper - Conical Inf. Envelope Structure 800X860 mm Outer diameter body 810 mm Body height 1050 mm
Vertical tank made of stainless steel with a useful capacity of 500 liters. Klopper top bottom with manual opening man's mouth with manual closures, collector with threaded junctions and camlock type load connection Conical bottom with discharge valve. With 4 legs mounted on stainless steel structure with rails for mobility by bull or pallet truck. General characteristics: Maker INOXGUER Material Stainless steel Year of manufacture 1999 Design pressure 0.9 kg/cm2 Test pressure 1.35 kg/cm2 Specifications: Volume 500 l (useful) Background type Sup. klopper - Conical Inf. Envelope Structure 800X860 mm Outer diameter body 810 mm Body height 1050 mm
Measuring device for speed or frequency, tachometer, cutting speed measuring device, hand tachometer, revolution measuring device -Manufacturer: Jaquets Indicator 100REVs 10 m -Accessories: see photo -Case: original case -Dimension box: 120/85/H30 mm -Weight: 0.3 kg
Vertical tank made of stainless steel with a useful capacity of 500 liters. Klopper top bottom with manual opening man's mouth with manual closures, collector with threaded junctions and camlock type load connection Conical bottom with discharge valve. With 4 legs mounted on stainless steel structure with rails for mobility by bull or pallet truck. General characteristics: Maker INOXGUER Material Stainless steel Year of manufacture 1999 Design pressure 0.9 kg/cm2 Test pressure 1.35 kg/cm2 Specifications: Volume 500 l (useful) Background type Sup. klopper - Conical Inf. Envelope Structure 800X860 mm Outer diameter body 810 mm Body height 1050 mm
Tank made of 316L stainless steel with a capacity of 400 liters. Top bottom klopper welded to the body with two tubulatures with flange. Two tubulatures with flange on the sides for visual level placement. Bottom klopper welded to the body with flange for discharge from the tank. Mounted on 2 posters. General characteristics: Maker STAINLESS STEEL BOILERMAKING Material Stainless steel 316L Year of manufacture 2000 Specifications: Volume 400 l approx. Background type Klopper Envelope 2 posters Outer diameter body 614 mm Body height 1500 mm Body height + backgrounds (total: 2200 mm)
Boiler tank made of iron by INDUSTRIAS IBAIONDO. Air charge pressure: 0 bar Maximum temperature: 40 ºC General characteristics: Maker INDUSTRY IBAIONDO Guy Conventional hydropneumatic accumulator Material Iron
Injector, cyclone, distributor for filter system, chip extraction, dust extraction, extraction system, ventilation ducts and fittings -Pipe connection: Ø 190 mm -Cone piece: Ø 465 mm -Material: Aluminum -Transport dimensions: 1100/580/H490 mm -Weight: 13 kg
maximum number of results exceeded
please refine your search
