made in germany used for sale

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws, 4-jaw set -Top jaws: Turning jaw set, 4-piece, hard -Jaw width: 24 mm -Dimensions: see photo techn. drawing -Quantity: 2 sets of interchangeable jaws available -Price: per set -Dimensions: 92/97/H67 mm / 90/100/H70 mm -Total weight: 2.9 kg/set

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws, 4-jaw set -Top jaws: 4-piece hard rotating jaw set -Jaw width: 21 mm -Dimensions: see photo technical. drawing -Quantity: 2 sets of interchangeable jaws available -Price: per set -Total dimensions: 76/85/H53 mm / 77/85/H51 mm -Total weight: 1.6 kg / 1.5 kg

Industrial vacuum cleaners, vacuum cleaners, dust extractors, industrial vacuum cleaners, floor vacuum cleaners, safety industrial vacuum cleaners -Manufacturer: Debus, industrial vacuum cleaner type DDS 605 7 31 M -Operating pressure: 6 bar -Air requirement: 2.6 m³/h -Suction performance: 7.8 m³/h -Dust container: volume approx. 110 liters -Dimensions of container total: Ø 640 x 730 mm -Dimension aggregate: 1330/620/H1360 mm -Total weight: 153 kg

PLC control, electronic module, interference filter, power supply line filter, ballast, line filter, power line filter, three-phase filter, three-phase line filter, filter module, line interference filter -Manufacturer: Sew Block, line filter interference filter -Type: NF 063-503 HLD 110-500/55 -Voltage: 3x 500/520V 50 - 60Hz -Dimensions: 250/85/H95 mm -Weight: 2.8 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws -Top jaws: Jaw set for three-jaw lathe chucks, soft -Jaw width: 20 mm -Dimensions: see photo technical. drawing -Quantity: 3 sets of interchangeable jaws available -Price: per set -Total dimensions: 90/90/H70 mm / 87/90/H65 mm -Total weight: 2.7 kg/ 2.8 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws, 4-jaw set -Top jaws: Rotary jaw set for four-jaw chuck, hard -Jaw width: 18 mm -Dimensions: see photo techn. drawing -Quantity: 1x set of interchangeable jaws available -Total dimensions: 61/72/H47 mm -Total weight: 0,9 kg/pc.

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws -Top jaws: Jaw set for three-jaw lathe chucks, hard -Jaw width: 16 mm -Dimensions: see photo technical. drawing -Quantity: 1x set of interchangeable jaws available -Total dimensions: 52/49/H41 mm -Weight: 0.4kg/set

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws, 4-jaw set -Top jaws: 4-piece hard rotating jaw set -Jaw width: 21 mm -Dimensions: see photo technical. drawing -Quantity: 1 set of interchangeable jaws available -Total dimensions: 76/85/H60 mm -Total weight: 1.8 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws -Top jaws: Jaw set for three-jaw lathe chuck, hard -Jaw width: 27 mm -Dimensions: see photo technical drawing -Number: 1 set of interchangeable jaws available -Price: per set -Dimensions total: 90/80/H65 mm -Total weight: 2.4 kg/set

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws, interchangeable jaws, wedge bar chucks, interchangeable jaws power chucks -Top jaws: soft top jaws for wedge bar chucks, helical teeth -Jaw width: 22 mm -Dimensions: see photo technical. drawing -Total dimensions: 100/65/H75 mm -Total weight: 2.9 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws, 4-jaw set -Top jaws: 4-piece hard rotating jaw set -Jaw width: 26 mm -Dimensions: see photo technical. drawing -Quantity: 1 set of interchangeable jaws available -Total dimensions: 76/85/H60 mm -Total weight: 2,3 kg

Interchangeable jaws, top jaws, three-jaw chuck, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, 4-jaw set -Top jaws: turning jaw set for four-jaw chucks, hard -Jaw width: 32 mm -Dimensions: see photo techn. drawing -Total dimensions: 140/130/H95 mm -Total weight: 7,8 kg

Interchangeable jaws, top jaws, three-jaw chuck, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, 4-jaw set -Top jaws: turning jaw set for four-jaw chucks, hard -Jaw width: 32 mm -Dimensions: see photo techn. drawing -Total dimensions: 140/130/H190 mm -Total weight: 14 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws, interchangeable jaws, wedge bar chucks, interchangeable jaws power chucks -Top jaws: soft top jaws for wedge bar chucks, helical teeth -Jaw width: 22 mm -Dimensions: see photo technical. drawing -Total dimensions: 100/65/H60 mm -Total weight: 1,8 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws, interchangeable jaws, wedge bar chucks, interchangeable jaws power chucks -Top jaws: soft top jaws for wedge bar chucks, helical teeth -Jaw width: 22 mm -Dimensions: see photo technical. drawing -Total dimensions: 95/70/H70 mm -Total weight: 2.7 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws, interchangeable jaws, wedge bar chucks, interchangeable jaws power chucks -Top jaws: soft top jaws for wedge bar chucks, helical teeth -Jaw width: 22 mm -Dimensions: see photo technical. drawing -Total dimensions: 100/65/H65 mm -Total weight: 2.3 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws, interchangeable jaws, wedge bar chucks, interchangeable jaws power chucks -Top jaws: soft top jaws for wedge bar chucks, helical teeth -Jaw width: 22 mm -Dimensions: see photo technical. drawing -Total dimensions: 100/65/H60 mm -Total weight: 2.1 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws, interchangeable jaws, wedge bar chucks, interchangeable jaws power chucks -Top jaws: soft top jaws for wedge bar chucks, helical teeth -Jaw width: 22 mm -Dimensions: see photo technical. drawing -Total dimensions: 90/65/H50 mm -Total weight: 1,6 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws, interchangeable jaws, wedge bar chucks, interchangeable jaws power chucks -Top jaws: soft top jaws for wedge bar chucks, helical teeth -Jaw width: 22 mm -Dimensions: see photo technical. drawing -Total dimensions: 105/75/H60 mm -Total weight: 2,5 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws, interchangeable jaws, wedge bar chucks, interchangeable jaws power chucks -Top jaws: soft top jaws for wedge bar chucks, helical teeth -Jaw width: 22 mm -Dimensions: see photo technical. drawing -Total dimensions: 90/70/H60 mm -Total weight: 2,1 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws, interchangeable jaws, wedge bar chucks, interchangeable jaws power chucks -Top jaws: soft top jaws for wedge bar chucks, helical teeth -Jaw width: 20 mm -Dimensions: see photo technical. drawing -Total dimensions: 80/60/H45 mm -Total weight: 1,5 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws, interchangeable jaws, wedge bar chucks, interchangeable jaws power chucks -Top jaws: soft top jaws for wedge bar chucks, helical teeth -Jaw width: 22 mm -Dimensions: see photo technical. drawing -Total dimensions: 110/70/H60 mm -Total weight: 2.0 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws, interchangeable jaws, wedge bar chucks, interchangeable jaws power chucks -Top jaws: soft top jaws for wedge bar chucks, helical teeth -Jaw width: 22 mm -Dimensions: see photo technical. drawing -Total dimensions: 95/70/H55 mm -Total weight: 2.1 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws, interchangeable jaws, wedge bar chucks, interchangeable jaws power chucks -Top jaws: soft top jaws for wedge bar chucks, helical teeth -Jaw width: 22 mm -Dimensions: see photo technical. drawing -Total dimensions: 95/65/H65 mm -Total weight: 2.3 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws, interchangeable jaws, wedge bar chucks, interchangeable jaws power chucks -Top jaws: soft top jaws for wedge bar chucks, helical teeth -Jaw width: 14 mm -Dimensions: see photo technical. drawing -Total dimensions: 50/60/H35 mm -Total weight: 0,5 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, interchangeable jaws, wedge bar chucks, interchangeable jaws power chucks -Top jaws: soft top jaws for wedge bar chucks, helical teeth -Jaw width: 22 mm -Dimensions: see photo technical. drawing -Total dimensions: 95/65/H60 mm -Total weight: 2.2 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws -Interchangeable jaws: 3-piece top jaw set, unstepped -Width: 50mm -Bore: Ø 17 mm -Quantity: 2 sets of interchangeable jaws available -Price: per set -Total dimensions: 180/150/H80 mm -Total weight: 13.3 kg / 13.5 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, interchangeable jaws, wedge bar chucks, interchangeable jaws power chucks -Handover: in current condition as seen -Toothing: 1 piece Damage see photos -Top jaws: soft top jaws for wedge bar chucks, helical teeth -Jaw width: 22 mm -Dimensions: see photo technical. drawing -Total dimensions: 115/65/H65 mm -Total weight: 2.2 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, interchangeable jaws, wedge bar chucks, interchangeable jaws power chucks -Top jaws: rotating jaw set base jaws for four-jaw chucks -Jaw width: 34 mm -Dimensions: see photo technical. drawing -Quantity: 2 sets of interchangeable jaws available -Price: per set -Total dimensions: 130/135/H43 mm -Total weight: 4.1 kg / 4.8 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws -Top jaws: Jaw set for three-jaw lathe chuck, hard -Jaw width: 24 mm -Dimensions: see photo technical drawing -Number: 2 sets of interchangeable jaws available -Price: per set -Dimensions total: 90/70/H65 mm / 90/72/H67 mm -Total weight: 2.2 kg/set

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws -Top jaws: for three-jaw lathe chucks, hard -Jaw width: 50 mm -Grid: 1/16 -Dimensions: see photo technical drawing -Dimensions total: 110/150/H55 mm -Total weight: 3.5 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws, interchangeable jaws, wedge bar chucks, interchangeable jaws, power chucks -Top jaws: Base jaws for key bar chucks, helical toothed -Jaw width: 22 mm -Dimensions: see photo technical drawing -Number: 4 sets of base jaws available -Price: per set -Total dimensions: 90/65/H35 mm / 90/67/H35 mm/ 90/70/H45 mm with screws -Total weight: 1.1 kg/set

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws, interchangeable jaws, wedge bar chucks, interchangeable jaws, power chucks -Manufacturer: Forkardt, clamping claw clamping jaws for manual and power chucks -Clamping claw: Type SKA 140-32 -Clamping jaws: Type KBN 12 -Dimensions: see photo -Total dimensions: 105/200/H80 mm -Total weight: 4.3 kg

CNC control, control panel, computer monitor, screen, TFT industrial monitor -Control panel: Operating terminal control panel including PC Command Panel -Monitor: FlatmanType FK170SBRGD001 -Control cabinet cooling unit: Rittal type SK 3302100 -Individual components: see photos -Total dimensions: 550/600/H870 mm -Weight: 52 kg

Injection molding cutting device for injection molding machine, injection molding machine, cutting pliers -Cutting device: for cutting plastic sprues, tabs, overflow cavities, webs, etc. -6 Cutting pliers: Cutting insert/individual components see photos -Price: complete -Total dimensions 1570/770/H680 mm -Weight: 49 kg

CNC control, control panel, computer monitor, screen, TFT industrial monitor -Manufacturer: B&R, control panel, operating terminal, control panel -Type: PowerPanel 500 5PP5:210261.001-01 -Individual components: see photos -Number: 2 terminals available -Price per piece -Total dimensions: 740/730/H210 mm -Weight: 26 kg/pc.

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws, interchangeable jaws, wedge bar chucks, interchangeable jaws, power chucks -Top jaws: soft top jaws for key bar chucks, helical toothed -Jaw width: 22 mm -Dimensions: see photo technical drawing -Total dimensions: 120/65/H70 mm -Total weight: 2.9 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws, interchangeable jaws, wedge bar chucks, interchangeable jaws, power chucks -Top jaws: soft top jaws for key bar chucks, helical toothed -Jaw width: 22 mm -Dimensions: see photo technical drawing -Total dimensions: 105/67/H72 mm -Total weight: 2.9 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws -Top jaws: Jaw set for three-jaw chuck, hard -Jaw width: 20 mm -Dimensions: see photo technical drawing -Quantity: 1 set of interchangeable jaws available Price: per set -Overall dimensions: 70/60/H55 mm / 70/60/H54 mm Total weight: 1.1 kg/set

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws -Top jaws: Jaw set for three-jaw lathe chuck, hard -Jaw width: 20 mm -Dimensions: see photo technical drawing -Number: 2 sets of interchangeable jaws available -Price: per set -Dimensions total: 70/60/H54 mm / 69/60/H54 -Total weight: 1.1 kg/set

PLC control, electronic module, interference filter, power supply line filter, ballast, mains filter, power line filter, three-phase filter, three-phase mains filter, filter module, mains interference filter -Manufacturer: Siemens, mains filter interference filter -Type: :B84131-M3-A116 -Voltage: 440/2500V 50 - 60Hz -Dimensions: 180/105/H50 mm Weight: 1.7 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws, interchangeable jaws, wedge bar chucks, interchangeable jaws, power chucks -Top jaws: soft top jaws for key bar chucks, helical toothed -Jaw width: 22 mm -Dimensions: see photo technical drawing -matching key bar chuck: ID12273 -Dimensions total: 90/70/H68 mm -Total weight: 2.1 kg

Inductive sensor, electronic sensor, safety switch, inductive proximity switch, proximity sensor, Namur sensor -Inductive sensor: proximity switch -Type: unfortunately no type designation -Sensor cable: RSMV 3-224 -Number: 46x sensor available -Price: per piece -Dimensions: Ø 45 x 25 mm -Weight: 0.1 kg/pc.

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws, 4-jaw set -Top jaws: 4-piece rotary jaw set, 3 sets -Jaw width: 34 mm -Dimensions: see photo technical drawing -Price/Sale: only complete -Total dimensions: 410/130/H80 mm -Total weight: 21.3 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws -Manufacturer: Röhm, top jaws jaw set for three-jaw lathe chuck, hard -Jaw width: 18 mm -Dimensions: see photo technical drawing -Dimensions total: 61/54/H47 mm -Total weight: 0.7 kg

Sewing machine, stand-mounted chain stitch sewing machine, industrial sewing machine, industrial sewing machine, stand-mounted sewing machine, overlock sewing machine on a mobile stand, fabric feed via sliding wheel -Manufacturer: Dohle, industrial sewing machine type 751-914 stand-mounted chain stitch sewing machine -Drive: Siemens 0.37 kW -Operation: with foot pedal -Dimensions: 740/620/H1320 mm -Weight: 102 kg

Sewing machine, stand-mounted chain stitch sewing machine, industrial sewing machine, industrial sewing machine, stand-mounted sewing machine, overlock sewing machine on a mobile stand, fabric feed via sliding wheel -Manufacturer: Dohle, industrial sewing machine type 751-914 stand-mounted chain stitch sewing machine -Drive: Kobold 0.37 kW -Operation: with foot pedal -Dimensions: 630/470/H1360 mm -Weight: 93 kg

Sewing machine, stand-mounted chain stitch sewing machine, industrial sewing machine, industrial sewing machine, stand-mounted sewing machine, overlock sewing machine on a mobile stand, fabric feed via sliding wheel -Manufacturer: Dohle, industrial sewing machine type 751-914 stand-mounted chain stitch sewing machine -Drive: Loher 0.37 kW -Operation: with foot pedal -Dimensions: 750/600/H1330 mm -Weight: 101 kg

Interchangeable jaws, top jaws, segment jaws, clamping jaws, block jaws, base jaws, four-jaw chucks, four-jaw lathe chucks, 4-jaw chucks, faceplate, faceplate chucks, facing lathe chucks, clamping device for dividing head -Clamping jaws: 4 pieces for four-jaw chuck, faceplate chuck, dividing head -Clamping width: 55 mm -Dimensions: see photo -Shipping/Price: complete -Dimensions: 200/60/H140 mm -Weight: 3.4 kg/piece

Quick-change chuck, quick-change holder, quick-change head, keyless drill holder, quick-change insert, interchangeable inserts, milling holder, collet chuck, reducing sleeves, attachment holder, thread quick-change insert -Manufacturer: Bilz, thread quick-change insert 2 pieces -Type: WES 3 B 14x11 / WES 3 B 22x18 -Design/Size: see photos -Price/Delivery: complete -Transport dimensions total: 150/72/H103 mm -Weight: 3 kg