made in germany used for sale

INOVA/OPTIMA DENESTER, MODEL SH250 Fully automatic system for unloading syringes from corresponding trays, then to the machine outfeed and transferred to the next machine. With infeed and outfeed conveyor belts, a separate control cabinet and an integrated control system SIEMENS, type Simatic S7-300. With various spare parts. Built in 2008. PRODUCTION Output: up to 36,000 syringes/h Tray capacity: 100 syringes/tray Syringes capacity: 1 ml DIMENSIONS Size: 280 x 150 x 200 cm (ca) Weight: 1500 kg (ca)

Offer 12 connecting rods with the part. 380683 for sale.

Offer 3x Ignition Box MIC950 for sale. Also to be handed in individually.

Offer 2pcs gas mixers for sale. One gas mixer is complete, the other lacks the servo motor.

A hydraulic sheet punching machine Indumasch without sheet manipulation axes, but with CNC backgauges for manual sheet positioning, is available. Punching force: 40t, max. sheet thickness: 10mm, stroke rate: 150/min, max. punching diameter: 105mm, working dimensions X/Y: 1000mm/750mm, positioning accuracy: 0.1mm, weight: approx. 3500kg. Without tools. The controls were overhauled in 2014. Documentation available. An on-site inspection is possible.

Qty. 1 Second hand aluminium extrusion press line Mfc.: Taiyuan Force: 5000 MT Type: Front loading – single action Built: 2007 Stopped in 2016 Product weight: max. 55 kg/m Billet dia.: 279 & 406 mm (11” & 16”) Length: 600 - 1200 mm Consist of: Cold billet saw Gas heated billet furnace Extrusion press Run-out table Platen saw Quenching device Single puller Stretcher Finishing saw Dies heater

Unused Inlet Device, Clamp coupling for Tetra Pak 618 - 718 - 818 Separators., Ref 22 - Part No 548412 01 - Inlet housing, Ref 23 - Part No 538247 04 - Clamp coupling, Ref 24 - Part No 538248 03 - Gasket, Ref 25 - Part No 541709 80 - Elbow pipe, Type of Machine: Inlet device, clamp coupling

The Mapro Positive Displacement Blower consist basically of a pair of Tri-lobe rotors, mounted on parallel shafts, rotating in opposite directions inside a properly shaped casing closed at the ends by side plates. The two Tri-lobe rotors are synchronized by a pair of timing gears. As the rotors rotate, air is drawn into the inlet side of the casing, is moved from the inlet to the outlet side by the free volumes, between rotors and stator and finally is forced out of the outlet side against the connected system pressure. The blower does not develop pressure within the casing but the discharge pressure depends only upon the connected system resistance. Motor: 15 kW - 400 V - 50 Hz - 2.950 rpm - 27,1 A. P(inlet): 1.013 hPa. P(outlet): 300 hPa. PS: 620 hPa. T amb: 20/40 °C. Blower speed: 2.500 rpm. Q: 228 cfm. Sound level: 87 dB(A)., Type of Machine: Positive displacement blower, Stock Numb ...

max. working diameter: 610 mm max. working lenght: 1.522 mm travel -x axis: 740 mm travel -y axis: 410 mm travel -z axis: 1.838 mm control: MAZATROL Fusion 640M Pro b-axis: 240 ° c-axis: 360 ° number of spindle speeds: 4.000 U/min spindle bore: 88 mm milling spindle turning speed range: 12.000 U/min numbers of positions in the tool changer: 80 CNC Turning- and Milling Center | MAZAK - INTEGREX E-410H The machine is in a well-maintained condition. The machine video from the production plant will be shared on request. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: INTEGREXE41H | INTEGREX 410H | INTEGREX-E410 H The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Big Bag emptying station with dedusting and dosing conveyor screw.

Process Vessels Stainless Steel Mixer/Melting Tank Manufacturer: Dibir Group Srl Capacity approx. 120 litres Electrically heated, thermal oil Frequency-controlled agitator Temperature control

Industrial Glaze Sprayer BAKONHomducer : BAKON B.V Year of Construction : 20083x400 V 50Hz 6kWGro-volume, automatic spraying and beautifully glazed products are the keywords of this Industrial Glaze Sprayer.Movable machine on swivel castorsMovable hopper with eccentric disc pumpSpray surplus is collected for reuseConveying speed adjustable via frequency converterHeight-adjustable spray bridge with adjustableElectric spiral heating to transfer products to to maintain a uniform temperatureCondition: Baker's conditionDetails see pictures

Gastro Table - Can Opener / Industrial Opener / 60 cmâ Product Descriptionâœ" Item Condition: New and Packedâœ" Manufacturer: SCHNEIDER GmbHâœ" Material: Stainless Steelâœ" Length: 600 mmâ Details see pictures

Ice Cream Scoop Inox No. 1/55 NEW Stainless steel with plastic handlesManufacturer : InoxLiter 1/55 à ̃ mm 41 Details see picture

Ice cream scoop Inox  No. 1/60 NEWabove mentioned price for 2 piecesstainless steel with plastic handlesManufacturer : InoxLiter 1/60 à ̃ mm 40 Details see picture

Ice cream scoop Inox No. 1/30 NEW above mentioned price for 2 piecesStainless steel with plastic handlesManufacturer : Inox liter 1/30 à ̃ 49 mm Details see picture

Ice cream scoop Inox No. 1/16 NEW Stainless steel with plastic handlesManufacturer : InoxLiter 1/16 à ̃ mm 58 Details see picture

Ice Cream Scoop Inox No. 1/20 NEW Stainless Steel with Plastic HandlesManufacturer : InoxLiterâ 1/20 à ̃ mm 56 Details see picture

Ice cream scoop Inox No. 1/24 NEW stainless steel with plastic handlesManufacturer : InoxLiter 1/24 à ̃ mm 51 Details see picture

4 Ink Pumps Complete Technotrans TB 200-15/9 Ink Pump Year 2007 Capacity 200kg bins Air Pressure: 8bar

ID3749 Doppstadt Inventhor 9 year/Baujahr 2019 approx. 4.180 hours/hours 32 t Pre-shredder, roller length 3,000 mm Pre-shredder, roller length 3,000 mm

We offer this well-preserved Hugong INTECUT-HT plasma cutting machine/CNC portal cutting machine KAI-TEC Smart, incl. marking function, built in 2025, because we are purchasing a larger system. The machine was purchased for one project only and has been in operation since August 2025. The manufacturer's warranty runs until August 2026. The system is fully functional, technically in perfect condition and not worn. There are normal signs of use. It is now too small for our company, but it is very suitable for smaller locksmiths, metal construction companies or workshops. Technical data & equipment CNC gantry cutting machine KAI-TEC Smart Cutting range: approx. 1,500 × 3,000 mm CNC control with cutting database Plasma system NEOCUT 105 with marking function Plasma cutting range: 1–20 mm mild steel (VA & aluminium max. 10mm) Machine burner incl. hose package Automatic ...

A defective CHC stone processing center Intermac is available. Travel X/Y: 2300mm/1000mm, material thickness range: 2mm-25mm, speed: 12000rpm, machine dimensions X/Y/Z: approx. 4700mm/2700mm/2700mm, weight: approx. 3500kg. A cost estimate from the manufacturer is available. Documentation available. An inspection on site is possible.

diameter range 4-8 mm shaft length under head 40-110 mm output pieces/min 600

diameter range 1,7-6,4 mm shaft length under head 4,5-75 mm output pieces/min 1000

Rolling bearings, ball bearings, SKF bearings, SKF, self-aligning bearings, roller bearings, needle bearings, axial cylindrical roller bearings, shaft washer -Manufacturer: INA, bearing washer shaft washer for axial cylindrical roller bearings 20 pcs. unused OVP -Type: WS 811 12 -Carton: with 20 pieces of bearing washers -Quantity: 2 boxes available -Price/Sale: per carton -Carton dimensions: 100/150/H95 mm -Weight: 2.1 kg/piece

Servo drive, servo card, output module, CPU card, input processor, power supply unit, control card, input card, controller, converter, controller -Indramat: Servo Power Supply -Type: TVM 1.2-050-220/300-WO/220/380 -Item: 232270-04397 -Price: per piece -Number: 2 pieces -Dimensions: 390/105/H325 mm -Weight: 14.8 kg

Permanent magnet motor, permanent magnet motor, electric motor, permanent magnet motor, permanent magnet motor, servo motor, permanent magnet main drive motor -Manufacturer: Indramat, motor from machining center Schleicher WV-SYS 160-1050 -Type: MAC112B-1-PD-2-C / 130-A-1 / S005 -Speed: 1500 rpm -Brake: 14 Nm DC 24 V -Shaft: Ø 32 x 60 mm -Number: 2x motors available -Price per piece -Dimensions: 550/210 / H250 mm -Weight: 38 kg

Permanent magnet motor, permanent magnet motor, electric motor, permanent magnet motor, permanent magnet motor, servo motor -Manufacturer: Indramat, motor comes from machining center Werner TC 2.6K -Type: MAC112A-0-LD-2HC / 130-AO -Speed: 3000 rpm -Shaft: Ø 32 x 60 mm -Dimensions: 370/195 / H250 mm -Weight: 25 kg

Permanent magnet motor, permanent magnet motor, electric motor, permanent magnet motor, permanent magnet motor, servo motor -Manufacturer: Rexroth / Indramat, the motor comes from the Werner TC 2.6K machining center -Type: MAC112A-0-LD-2HC / 130-A-1 -Speed: 3000 rpm -Shaft: Ø 32 x 60 mm -Brake: 14 Nm -Dimensions: 385/192 / H240 mm -Weight: 26 kg

Permanent magnet motor, permanent magnet motor, electric motor, permanent magnet motor, permanent magnet motor, servo motor, permanent magnet main drive motor -Manufacturer: Indramat, permanent magnet main drive motor from machining center Werner TC 2.6K -Type: MAC112B-O-GD-2HC / 130-AO -Power: 3.55 kW -Speed: 2750/6000 rpm -Shaft: Ø 32 x 60 mm -Dimensions: 445/195 / H245 mm -Weight: 38 kg

Permanent magnet motor, permanent magnet motor, electric motor, permanent magnet motor, permanent magnet motor, servo motor, permanent magnet main drive motor, DC motor, asynchronous main drive motor, spindle motor -Handover: in the current state as viewed -Fan housing: damaged, housing cover is missing, see photos -Manufacturer: Indramat, asynchronous main drive motor from machining center Werner TC 2.6K -Type: 2AD160C-B35RR2-BS03-B2N3 / S028 -Power: 37 kW -Speed: 1500/6000 rpm -Shaft: Ø 55 x 110 mm -Dimensions: 1000/395 / H320 mm -Weight: 254 kg

Permanent magnet motor, permanent magnet motor, electric motor, permanent magnet motor, permanent magnet motor, servo motor, permanent magnet main drive motor, asynchronous main drive motor, spindle motor, permanent magnet three-phase servo motor -Manufacturer: Indramat, permanent magnet three-phase servo motor -Type: MAC090C-O-GD-2-C / 110-AO / S001 -Speed: 3000 rpm -Shaft: Ø 24 x 50 mm -Dimensions: 455/140 / H195 mm -Weight: 22 kg

Conveyor belt rollers, transport rollers, replacement rollers, conveyor belt, roller conveyor, carrier rollers -Diameter roller: 50 mm -Transport roller width: 265 mm -Total length: 310 mm -Socket: Ø 14 mm -Wrench size: 12 mm -Number: 30 rolls available -Price: per piece -Weight: 0.9 kg/piece

Plummer block housings, bearing blocks for shredders, crushers, water mills, chippers, cutting mills, granulators, and cutting granulators -Quantity: 1 piece heavy-duty steel pillow block housing -Type: Bearing block, inner diameter: 320 mm -Axis/Center of housing: 190 mm -with: shaft seal discs -Quantity: 1x bearing block available -Suitable for: Bearing abbreviations 22236/22330/23064/23138/23236, not included in the scope of delivery -Suitable for: Bearing abbreviations 22236K/22330K/23064K/23138K/23236K, not included in the scope of delivery -Dimensions: 560/190/H395 mm -Weight: 228 kg

Trusses, trade fair construction, trade fair trusses, lattice masts, partition walls for trade fair stands -Quantity: 4x transport trolleys with partitions and lamps -Equipment: 3x frames, each with 2 pieces lamps size 1500 x 2500 mm -Accessories: see photos -Transport dimensions: 1350/950/H900 mm -Weight: 120kg

Slewing bearings, slewing ring, single row ball slewing ring, four-point bearings -Comes from: HUSS Rides manufacturer of leisure facilities -Spare part: from -Manufacturer: INA -Type: VLA200544-N -Outer diameter: 640.3 mm -Interior diameter: 434 mm -Height: 56 mm -externally toothed -Teeth: 105 -Module: 6 mm -Number: 6x bearings available -Price: per piece -Weight: 39 kg/piece

Transport trolleys, platform trolleys, transport trolley wheels, table trolleys, assembly trolleys, complete wheels, tires with rims, stroller wheels, bicycle trailers, stroller wheels -Manufacturer: Innova Apse Complete wheel tire with brake for strollers/bicycle trailers/scooters, unused -Tires: 12 1/2 x 2 1/4 (57-203) -Brake: Apse 60 Brake -Quantity: 92 pieces -Price: per piece -Dimensions: Ø 310 x 158 mm -Weight: 1.3 kg/piece

Transport trolleys, platform trolleys, transport trolley wheels, table trolleys, assembly trolleys, complete wheels, tires with rims, stroller wheels, bicycle trailers, stroller wheels -Manufacturer: Innova Apse complete wheel tire with brake for stroller/bicycle trailer/scooter unused -Tires: 12 1/2 x 2 1/4 (57-203) -Brake: Apse 60 Brake -Quantity: 72 pieces -Price: per piece -Dimensions total: Ø 310 x 145 mm -Weight: 1.3 kg/piece

Cardan shaft, cardan shaft, universal joint, center bearing, holder -Cardan shaft: center bearing, unused -Type / order no .: 21001375 402027/201 7610AVA06 -Inside: O 44 mm -Measurements: see photos -Number: 12x holders available -Price: per piece -Minimum order: 4 pieces -Dimensions: 147/93/30 mm -Weight: 0.6 kg / pc.

Conveyor belt rollers, transport rollers, replacement rollers, conveyor belt, roller track, carrier rollers -Conveyor rollers: transport rollers diameter 50 mm -Transport width: 400 mm -Shaft: Hex 11 mm -Number: 1x transport roller available -Price per piece -Total dimensions: Ø 50 x 440 mm -Weight: 1.2 kg/pcs

Plummer block housings, pillow block housings, pillow block housings, pillow block housing units, pillow block housing units, SKF pillow block housings, pillow block housing units -Plumb block bearing: bearing block, inner Ø 50 mm -Quantity: 3 pillow block housings available -Price: per piece -Dimensions: 210/50/H170 mm -Weight: 3.3 kg/piece

Conveyor rollers, transport rollers, replacement rollers, conveyor belt, roller conveyor, carrying rollers -Conveyor belt rollers: Transport rollers, diameter 90 mm -Transport width: 900 mm -Recording: M10 -2 Sprockets: Ø 78 x 10 mm, 14 teeth -Quantity: 2x transport rollers available -Price: per piece -Dimensions: Ø 90 x 970 mm -Weight: 8.8 kg/piece

Curved conveyor belt, curved track, curved conveyor track, curved roller conveyor, curved roller conveyor, curved conveyor, curved conveyor with drive, conveyor belt -Manufacturer: TGW, 90° curved conveyor belt with drive -Speed: 10m/min -Drive: SEW-Eurodrive 0.55 kW 16 rpm SA57 DT80K4/TF/Z/IS -Conveyor width: 1275 mm -Transport dimension: 1600/2760/H545 mm -Weight: 342 kg

Ship propeller, brass gland, brass gland, bronze gland, ship accessories -Stuffing box: Material bronze / steel -Inner part: material bronze -Diameter: outer Ø 855 mm / inner Ø 800 mm, thread pitch 10 mm see photos -Total dimensions: Ø 974 x 293 mm, weight 209 kg -Outer part: steel casing Ø 915/847 mm -Total dimensions: Ø 975 x 385 mm, weight 369 kg -Thread: pitch 10 mm, see photos -Transport dimension: ca.1200/1000/H1020 mm -Total weight: approx. 620 kg

End Mill, Milling Cutter, Shank Thread Mill, Thread Cutter, Threading Tool, Indexable Thread Mill -Manufacturer: Ingersoll, indexable insert thread milling cutter M40 x 4.5 unused original packaging -Type: SR 0040 L30-2 -Art. No.: 3026150 12Y1SO40070W6R00 -Intake: Ø 32 mm -Dimensions: Ø40 x 130 mm -Weight: 0.7 kg

Packing Line, Packing Machine, Hood Shrink Machine, Hood Shrinker, Film Wrapping Machine, Sealing Tool Sealing Tool, Tray Sealing Machine, Tray Sealer -Manufacturer: Reepack, sealing tool from tray sealing machine Inauen VC999/ TS 1200 N -Type.: 342201270 -Shell size: 270 x 170 mm -Cutting die: see photos for size -Dimensions machine: 540/520/H220 mm -Weight 49 kg

Servo drive, servo card, output module, CPU card, input processor, power supply, control, converter, controller, servo line former, drive control device, power supply, AC main spindle drive, spindle controller -Indramat: AC main spindle drive from DMT CD320 cycle lathe -Type: TDA1.3-100-3 API -Item: 244599 K41/96 -Dimension: 325/150/H390 mm -Weight: 10.8 kg

Permanent Magnet Motor, Permanent Magnet Motor, Electric Motor, Perm.Magn-Mot, Perm Magnet Motors, Servo Motor, Permanent Magnet Main Drive Motor, DC Motor, Asynchronous Main Drive Motor, Spindle Motor -Manufacturer: Indramat, servo motor from cycle lathe DMT CD320 -Type: MACO71C-0-US-2-C/095-A-/S001 -Part No.: 228353 -Speed: 2000 rpm -Shaft: Ø 19 x 37 mm -Dimensions: 390/115/H170 mm -Weight: 11.9 kg

Conveyor belt, belt conveyor belt, conveyor belt, belt conveyor, belt conveyor, flat belt conveyor -Manufacturer: Interroll, belt conveyor type 4081 with pneumatic height adjustment -Lifting height: 500 mm -Speed: 8 m/min -Strap width: 1215 mm -Conveying length: 815 mm, dimensions see technical photo. drawing -Drive: SEW-Eurodrive 0.37 kW, see photo of nameplate -Transport dimensions: 1460/1040/H1360 mm -Weight: 223 kg with pallet