made in germany used for sale

Key data: 400 KW, 500 kVA, 400 V

The largest model in Electroquell's range. The 500 kVA (400 kW) generator with a Ricardo motor is suitable for shopping malls, industrial plants and large investments. Ricardo Motor ComAp IL-NT AMF25 controller Brushless alternator Weatherproof housing Drip pan Possibility of continuous operation 24 hours a day Power: 500 kVA / 400 kW Voltage: 400 V Current: approx. 722 A Fuel: Diesel EN 590 Additional options: ATS system, remote communication, cooler for 55 degrees Warranty: up to 60 months

Sanco Dosing Installation, Year of Manufacture: 2018 Consisting of: - 2x insulated 1200-liter tanks with manhole and agitator - Accompanying platform - 2x PROMASS A flow meters with control cabinets - LKH-5 centrifugal pump - Grundfos pump - Plate heat exchanger - Associated piping The installation was previously used for dosing lecithin, but is also suitable for other products. The unit has been dismantled in working condition and is currently stored in our warehouse. We are happy to assist you further upon serious interest in this installation.

Manufacturer: INOTEC - overhauled Type: WT97-SH Power: 2 kW Weight: approx. 480 kg Length x width x height: 998 x 850 x 1740 mm - Calibers from 17 to 46 mm - Infinitely adjustable speed from 0.25 m/s to 0.8 m/s Request a quote iNTER-WiBA Sp.J. Ul. Krakowska 263 PL 43-305 Bielsko-Biala VAT number: PL547-17-47-669 tel. 0048 33 812 58 60

Polishing machine with 4 possible inserts, with extraction

Process Vessels Manufacturer : Küchenbauer Capacity: 194 litres Technical specifications : Cylindrical stainless steel container, hanging, claws, without frame Double-jacket, steam- or water-pickled, pressure-resistant up to 3 bar, operating temperature double-jacket: 140 °C Agitator Interior Operating temperature 100 C° Lid

with packing device

Melting Vessel Capacity: 450 litres Technical specifications : cylindrical 450 litre melting tank, Material: stainless steel, Double jacket can be heated with water or steam, standing on feet was used to melt lard Food safe Metrics: ca. Diameter: 1,000 mm Outer diameter : 1,100 mm Cylindrical height: 550 mm Height: 1,500 mm

Stainless steel tanks Manufacturer: Becker Tankbau Capacity 14.250 litres Cylindrical stainless steel container, single-walled, no agitator Diameter 2.40 m, total height approx. 4.10 m

Specifications: - Sanding belt dimensions approx. 2000 x 150 mm - Surface grinding opening approx. 560 x 150 mm - Sanding belt speed approx. 30 m/sec. - Contact washer B 150 / D 200 mm - Drive pulley B 150 / D 200 mm - Drive 400 V / 3 kW - Working height adjustable -Mot. Dust extraction - Space requirement approx. W 750 x H 1050 x D 1500 mm - Weight approx. 120 kg

Used-refurbished 750 litre tank interchangeable tank design Technical data: HxWxD: 3000x1200x2300mm 3,3 kW electric power 400V, 3F, 50 Hz Weight: 760 kg

Used-refurbished machine max. 1800 cuts/minute 8-48mm product thickness 2mm cutting accuracy External dimensions (HxWxD): 850x850x1500 mm

Shrink bags are mainly used in the food industry. Food packaged in a shrink bag is placed in a container filled with hot water for a few seconds; during the immersion process, the bag shrinks around the product, keeping it fresh for longer and affecting its appearance. The immersion tank can be operated manually or automatically. On the Inauen VC999 Tank 6241 Shrink Tank, programs can be easily set via a touch screen. The machine is made entirely of stainless steel. Capacity: 12 cycles/min. Programmable cycle time: 5-99 s.

Used-refurbished machine 350 Litre tank capacity Belt drive with toothed belt TC 20/40 programmable control Vacuum pump

Process Vessels Manufacturer: Schwarte-Milfor Capacity 750 l Cylindrical process vessel standing on feet, hermetically welded insulation, Double jacket, WGR MR 125 magnetic agitator on the bottom, agitator flange on the underbody (drive missing) Product space: vacuum and pressure resistant -1/3 bar, operating temperature -10/150 °C Interior polished, double jacket: Pressure-resistant up to 3 bar, operating temperature 150 °C the measurements are: Total height approx. 2,300 cm Diameter approx. 1,050 cm cylindrical height approx. 1,300 cm Feet 300 cm high Double jacket inlet and outlet DN 25 Last Assignment Pharmacy very good condition

Equipments: as is Good condition Overtemperature protection max. 170°C Plant power max. 7.5 kW PUR gluing unit

Specifications Cutting width: 3.8 x 40mm Productivity (80g/m²): 65-75 Power connection: 400 V / 2.2 kW Year of Make: 1993 the safety level DIN 66399: P-4 / O-3 / T-4 / F-1 / E-3

Used-refurbished machine 450mm welding bar electric excess cutting 510x480mm chamber size 410mm welding bar clearance 145/195mm chamber height 40m3/h vacuum pump Single chamber

Merck Hitachi 7490 Ri/Refractive Index Detector Merck Hitachi 7490 Ri Detector Flow cell 8 ul Flow rate 10ml/min Ri range 1.0 to 1.75

Technical specifications: Machine: Eagle iNspire 1530 30kW Laser source: Model YLS-30000 CW Workspace: 1500mm x 3000mm Year of production: 2024 Laser power: 30 000W Head: eVa v11.020 2.0 Additional options: 1. PRODUCTION KIT - The production kit is prepared according to the machine series, laser power and set of consumables necessary to start production immediately. 2. PREPARING MACHINE FOR AUTOMATION - It allows for the possibility of an already installed fiber laser cutting machine to be fully integrated with an automation system in the future. 3. ADDITIONAL PULPIT - The operator doesn’t have to go in front of the machine to control the cutting process or run the program. On the additional control panel, the whole cutting process is visible thanks to the camera installed inside the machine. 4. EAGLE EYE - The function allows you to monitor all the activities taking pla ...

Key data: 3000 , 1500 , 15000

Machine options included: - Eagle AC - MYEDROP - drag & drop option - MYEBOOST - very fast cutting up to 12-15mm - MYECAT - improved cutting quality of big thicknesses; possibility to cut rusty metal sheets - MYEMIX 1.0 - no burr cutting of mild steel and aluminium up to 12mm by automatically changing between 3 gases. - MYESPOT - Super fast sheet measurement system CraneMasterExtended S-DOWN Automation options included: - Separation of sheets - Sheet thickness measurement - Anti collision system - Automatic Machine combs cleaning system - Each suction cup control - Double number of suctions cups

Item condition: well-maintained Availability: immediately Description: see attached data sheet Capacity: 90 kg/h Machine weight approx.: 137 kg Volts/ Heart: 230 / 50 Overall length: approx. 990 mm Total height: approx. 660 mm

Table dimensions ... 900 x 500mm Axis X ... 700mm Axis Y ... 500mm Axis Z ... 500mm ISO 40 Spindle speed ... 0-3150 rpm L x W x H ... 2220x2115x2120mm Machine weight ... 2550kg The machine is in good condition, possible to test under power.

workpice diameter max.: 90 mm forward bearing diameter: 140 mm Turning speeds mainspindle: 4.200 U/min Power: 35,5 KW Control: INDEX C 200-4 travel -x axis: 1.500 mm travel -z axis: 340 mm travel -y axis: 180 mm b-axis: 360 ° CNC turning and milling center vertical | INDEX - V300 equipped with a turret for driven tools as well as y- + B- axis. Further information: - direct measuring system on X + Z The machine is in good condition. For additional equipment information please refer to the original order confirmation which is included in the offer of this machine. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: V-300 | V 300 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

KHS can filler, Innofill, 50 filling valves, standard can 500 ml, Sleek can 330 ml, can lid 202, with Ferrum seamer F8, year of manufacture: 2008, with can lid magazine KHS Can Filler Filling Canning, Innofill, 50 Filling valves, Standard Can 500ml / 0.5liter, 50cl, Sleek Can 330ml / 0.33l, 33cl, Can end lid 202, with Ferrum can seamer F8, year: 2008, with can end lid magazine

Used KHS PET stretch blow molder, year of manufacture: 2016, type: Inno PET Blomax 10S, 10 cavities, output approx. 14,000 - 22,000 bottles / hour, PCO 1810, currently set up to 0.5 - 1.5, optionally with air transport. Used KHS Blow Molding PET Blowing Machine, Year: 2016, Type: Inno PET Blomax 10S, 10 cavities, Range of capacity 14.000 - 22.000 bph, Bottle Neck PCO 1810, now adjusted to 0.5 - 1.5 / 500ml - 1.500ml, optional PET bair conveyors available.

Key data: 1150 mm, 3 st.

CALIBRATING SANDING machine with 2 belts + brush unit model INFOTRONIC NEPTUN 115 RKSAVE . made in ITALY second-hand machine working conditions Excellent, machine as new machine with inverter on the carpet machine with CE regulation: YES instruction booklet : YES universal machine for wood, furniture, custom-made furniture, wooden frames, doors, panels, composite materials, plastics and various Technical data: Max. working width mm.1150 Max working height mm.150 Min working height mm.3 Dimensions of abrasive belts mm.1165 x 2620 Advancement speed belt , with inverter , from 5 to 15 m/min Automatic centering Composition ( 1° e 2° unit , motor power Hp 25 . 3 speed ) : 1st unit : Rubber Roller diameter mm.170 - shore 45 Automatic blowers for cleaning abrasive belts 2nd unit : Combined Steel Roller + Electronic Segmented pad Steel roller diameter mm.170 Ee ...

Manufacturer: PFM Type: Zenith Inox Year: 2002 Capacity: ~50 pcs/min Electrical power: 4.5 kW Weight: 680 kg Optional: Piston filler with heated tank for processed cheese Condition: good, fully functional

Key data: 3048 KW, 1500 1/min

Engine with gas train, XT4 safi2 control panel, wihout generator ABB turbochargers, documentation

Producent INTOS Zebrak Tjechië Type FNGJ 20 Chalkboard afmeting breedte x lengte 400 x 256 mm Longitudinal Plaatsing X=as 450 mm Dwarsverplaatsing Y=as 300 mm Verticaleverplaatsing Z=as 350 mm Spindle opname SK 40 DIN 2080 Spindle toerental 50 -2500 rpm. Aantal toerentallen 18 Sheet voeding X-Y as 8-400 mm/min. Sheet voeding Z as 4-200 mm/min. Rapid traverse X-Y as 2400 mm/min. Rapid traverse Z as 1200 mm/min. Electrified capacity 2.2 kW Afmetingen L x W x H 1735 x 1475 x 1660 mm Weight 1660 kg Standaard toebehoren Koelmiddel inrichting Heidenhain uitlezing met taster

Weld edge former INDUMASCH SIEGEN Type V 12Masch. No.: 50674 Year of construction 1992Material thickness max. 40 mmChamfer angle 45Working speed approx. 3 m/min. Motor power 2 kWNetz connection 400 Volt, 50 Hz- Flow / return- Built-in guide roller for chamfer angle 45- Belt guard missingDimensions L x W x H 650 x 600 x 650 mmWeight 75 kggood condition; used

4 pieces of adjustable jaws INGERSOLL for face plateChuck jaws for lathe chuck, mechanical clamping device, clamping blockNo: 39.02.10000 / 501.397Jaw width 70 mmJaw length 180 mmJaw carrier height 150 mmBase plate 325 x 265 mm- Step jaws for turning as rotary and drilling jaws- Jaw adjustment via trapezoidal threaded spindle- Jaw support with 6 recesses 40 x 30 mm for fastening- Distance between recesses 280 x 133 and 220 x 90 mm (center)Dimensions L x W x H 325 x 265 x 215 mmWeight per jaw 36.5

SLA5800 Biotech - MFC - Digitally Controlled Mass Flow Controller for Gas, Mass Flow Controller Elastomer Sealed Mass Flow Controller, Flow Control, Flow Meter, Flow Controller, Thermal Mass FlowBROOKS INSTRUMENT Type SLA585081BAB1A2S1Ser. No. 01C00500222Year of construction 2020 (New / unused in original box)Series SLA5800 BiotechOption package Biotech Premium Packet Code TNetz connection 13.5 - 27 VDC (connector M8, 5 pin, male)Power consumption max. 10 wattsInterface PROFINET (2x RJ-45) Optical display 2

Turning diameter: 200mm, turning length: 400mm, turning diameter: 420mm, bar diameter: 60mm, max. spindle chuck diameter: 160mm, speed: 5000rpm, turret: 2, positions: 2x14, rapid traverse X/Z: 20m/min/30m/min. Machine dimensions X/Y/Z: approx. 7500mm/2100mm/2100mm, weight: approx. 4500kg. Documentation available. On-site inspection is possible.

A blank turner for sheet metal blanks is available. Max. Blank dimensions X/Y: 1600mm/1100mm, max. blank stack height: 190mm, max. stack weight: 1500kg, max. stack inclination: 15°, cycle time with pallets: approx. 30s, machine dimensions X/Y/Z: approx. 3500mm/2500mm/2500mm, weight: approx. 3000kg. Documentation available. On-site inspection is possible.

Travel X/Y/Z: 500mm/350mm/500mm, table dimensions X/Y: 800mm/600mm, max. table load: 800kg, work bowl dimensions X/Y/Z: 860mm/620mm/350mm, max. electrode weight: 200kg, tool positions: 28, machine dimensions X/Y/Z: approx. 3000mm/3750mm/3000mm, weight: approx. 3340kg. Documentation available. On-site inspection is possible.

INCIMAR INCISOGRAFO MC 800 Manual engraving machine/ manual pantograph, with aspirator, Alphabets, various stencils/ templates. For engraving marble and granite surfaces etc.

A welding system for welding metal pipes is available. Number of heads longitudinal seam/round seam: 3/3, workpiece inner diameter min./max.: 600mm/4500mm, max. workpiece length: 12700mm, max. workpiece weight: 50t, max. wire diameter: 4mm. Conveyor belt driven/rotating: 25t/25t. Head capacity: 2x AC 1000 and 1x DC 1200, including automatic brushing system. Documentation available. On-site inspection is possible.

KÄLIN wide planer, type Industry-HQ 4-670 2AF-EX, Manufacture year 2011, Machine specifications, - Working width 60 - 650 mm, - Working height 30 - 310 mm, - Feed speed 6 - 36 m/min, - Feeding system, total 17.6 kW, Spindle layout:, 1. Horizontal spindle bottom, motor 18.5kW, 2. Horizontal spindle top, motor 22 kW, 3. Vertical spindle right, motor 15 kW, 4. Vertical spindle left, motor 15 kW, # 4-sides chamfering device, each 1.5 kW, - Upper part can be quickly adjusted with 6 lifting columns, - Driven feed rollers in the upper part of the machine, - Driven feed rollers in machine stand, - Vertical spindles with counter bearings, - Heavy duty outfeed unit with drive, - Feed speed with frequency converter, - Control panel with digital positioning controller for planing width and planing thickness, - Soundproof cabin

frequency: 50 Hz weight: 3000 kg voltage: 3 x 400 V output: 8,3 kw ampere: 12 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Year: ca. 1988 plate thickness: bei Stahl max. 3,3 mm table:: 1100 x 700 Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Weight: 10 kg Year: ca. 2009 : Table dimensions: mm Motor output: kW Spindle diameter: mm reus: U/min The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 200 mm turning length: 400 mm control: SIEMENS SINUMERIC 840 C total power requirement: 40 kW weight of the machine ca.: 6.500 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 300 mm turning length: 710 mm control: SIEMENS SINUMERIC 840 total power requirement: 40 kW weight of the machine ca.: 6000 kg dimensions of the machine ca.: m I N D E X (Germany) CNC Controlled Slant-Bed Chuck Lathe with Turret and Tailstock and INDEX CNC Control C 200 – 4 (SIEMENS) Model G 300 Year 1995 S/N 5000 65 _____________________________________________________________ Turning - Ø, with chuck, max. 300 mm Spindle bore 90 mm Max. Workpiece Swing dia. 400 / 590 mm Turning length / travel of turning slide, (X-Achse) max. 710 mm Turret head slide cross movement (Z-Axis) max. 140 mm Turret with 12 tool holder positions DIN 30 mm Feed range of turret slide / Quickfeed 0,1 - 20 m/Min. Feed Force of X/Z-Axis 8 – 13 kN Steplessly a ...

turning diameter: 60 mm turning length: 200 mm number of slides: total power requirement: 20 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 250 mm turning length: 400 mm control: C 200 / 8 total power requirement: 60 kW weight of the machine ca.: 8,5 t Swing Ø above bed, max. 300 mm Max. turning Ø for chucking work, approx. 250 mm Travel of Slides: Turret 1, X / Z travel 163 / 550 mm Turret 2, X / Z / Y travel 140 / 250 / 260 mm Spindle bore, approx. 65 mm Tool holder bore 30 mm Spindle speeds 25 - 5,000 rpm Feed range 0 - 15,000 rpm Spindle drive 0.5 - 40 kW Total electrical load 60 kW - 380 V - 50 Hz Weight, approx. 8,500 kg Accessories / Special Features SIEMENS CNC Continuous Path Control, Model 880 (INDEX C 200-8) for at least 6 axes, with enlarged memory and with subprograms, simulation, etc. Double column loading device for large workpieces, mounted above the machine. With 3-jaw gripper and storage system for blanks and finished parts, integrated in the CNC control. Spindle indexing an ...

rated capacity: 2,0 KW rated current: 10/6,0 Ampere output voltage: 2 x 230AC / 1 x 12DC V weight of the machine ca.: 29 Kg dimensions of the machine ca.: 490 x 280 x 405 mm A powerful, reliable 2000 watt generator. Durable and energy efficient 80cc 4-stroke engine. Ideal for traveling with a motorhome, caravan or tent. Equipped with 2 x 230V and 1 x 12V DC output. Automatic overload protection. Only 29 kilograms (!). Easy to carry or store. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

On behalf of a customer, we are selling an HP JetFusion 3D printer as a spare parts carrier., Included:, - 22x 4KG PA12 (NEW), - 3x Fusing agent, - 6x Detailing agent, - 1x Bright Fusing, - 1x SERV ASSY-MCB-V5 PN: M2K85-67391, - 1x SERV ASSY-CABLE-PEN CARRIAGE POS CHE PN: M2K85-67388, - 1x SERV ASSY RELAY CONTROL PCB PN: M2K85-67103, - 1x SERV ASSY-PCA-CLEAN AIR PN: M2K86-67235, - 1x SERV ASSY ECHAIN v2 PN: M2K85-67298, - 1x SERV ASSY PLATFORM SEALS PN: M2K86-67024, - 2x SERV ASSY-EXHAUST HOSE / Extraction hose PN: M2K86-67073, - 1x SERV ASSY-FUSING CARRIAGE DRVE PN: M2K83-67007, - 1x SERV ASSY CABLES BUCKET PN: M2K85-67175, - 1x SERV ASSY-EXHAUST FAN BUNDLE PN: M2K85-67263, - 1x Air Exhaust Filter PN: 8WA29A, - 1x SERV ASSY-ADS CHAIN-V2 PN: M2K86-67289, technology: HP Multi Jet Fusion Technology, Effective construction volume: Up to 332 × 190 × 248 mm, build speed: 2,199 cm 3 /hou ...

A Hildebrandt foam padding machine for padding fragile goods is available. Production capacity: 21 bags/min, padding combinations: 156, foam expansion: 280x, bag size range: 200mm-760mm, foam quantity range: 0%-55%, height adjustment: 600mm, machine dimensions X/Y/Z: approx. 1350mm/1000mm/2000mm-2600mm. Documentation available. On-site inspection is possible.

A dust extraction system is available. 1) Filter unit FAV FSR219/200-FDK, year of construction: 2019. 2) Fan intensive filter RM 50-N-60, air volume flow: 20000m³/h. 3) Intensive filter fan RM 28-N-45, air flow rate: 6900m³/h. 4) Fan intensive filter RM 50-N-60, air flow rate: 20000m³/h. Documentation available. On-site inspection is possible.

Many different plug-in shelving components (support frames and shelf supports) are available. 65x BITO P2 27/10 support frames, year of manufacture: 2010, dimensions X/Y: 1100mm/3500mm. 42x profile shelf supports BITO PT95L-2.700, year of manufacture: 2010, dimensions X: 2700mm. 28x profile shelf supports BITO PT95L-1.800, year of manufacture: 2010, dimensions X: 1800mm. 108x profile shelf supports BITO PT120M-3.600, year of construction: 2010, dimensions X: 3600mm. 18x Röchling TC 304 support frames, dimensions X/Y: 1100mm/2050mm. 112x Röchling INP 100 profile shelf supports, dimensions X: 3300mm. 28x Röchling TC 304 support frames, dimensions X/Y: 1100mm/3150mm.