made in germany used for sale

Nicotra Gebhardt ZDS 20-0071 Pedestal Silencer Pedestal silencer for inlet side sound attenuation of roof fans Manufacturer: Nicotra Gebhardt Type: ZDS 20-0071 Pedestal silencer Flat roof plinth galvanized steel sheet More items - new and used - can be found in our shop! International shipping costs on request!.

Metalref boiler Model BRIK FIRE at wooden wastes Max operating temperature 90° Potential yield 78,000 Kcal/h Outbreak potential 95,000 Kcal/h Main fuel Chips/Sawdust Complete with automatic hydraulic feeder

- Grapes: 500 kg - Dimensions: height 100 cm, diameter 90/95 cm - Condition: OK / Used

The optical density of the solutions is determined with a DR 5000 spectrophotometer. Model: DR5000 Lamp: tungsten and deuterium Operation: transmission (%), absorption, concentration Data storage: 2000 Wavelength: 190-1100nm Resolution: 0,1 Accuracy: +-1nm Wavelength calibration: manual or automatic Scanning speed: 1 full scan per minute in 1 nm increments Spectrum Wavelength: 2 nm Photometric limits: +-3A Photometric accuracy: 5 mA at 0.0 to 0.5 A, 1% prie 0,5 iki 2A Language: English, Spanish, French, German, Russian, Czech, Spanish, Czech, etc. Operating Temp: 10 to 40C, max 80% humidity Storage temp: -25 to 60C, max 80% humidity Interface: USB 1.1 The instruments measurement parameters and limits are specified in the instrument manufacturers user manual.

Type: 6SE7031-3FG20-Z Description: SIMOVERT MASTERDRIVES SIMOVERT VC, CONVERTER CHASSIS UNIT, IP00 3 500-575V AC, 50/60HZ, 128A NOM. POWER RATING: 90 KW .

Hydraulic rotary indexing table with face teeth FIBROTAKT Hydraulic rotary indexing table, rotary table type Y 13 630 FN3RA T6 Fabr. No. 11 136-0840 Year of construction 1981 Table diameter 630 mm Table height = height 250 mm Table passage 50 mm Switching angle 60 Hydraulic working pressure 30 bar - fixed switching step of 6 pitches - Face toothing for highest part accuracies - Hydraulic drive - Table structure with 6 hydraulic clamping devices (inner collets 90/100 mm) Space requirement table L x W x H 700 x 700 x 250 mm Space requirement with structure L x W x H 1380 x 1380 x 800 mm Weight table approx. 600 kg Weight with superstructure 1350 kg good condition; used

Two-piece pipe clamp with nut, stainless steel pipe clamp, 21 pieces FALU 4x 3/4 ( inch ) 17x 1 ( inch ) Clamp width: 30 mm Thread: M8 x 1.25, Depth: 10 mm Material: Stainless steel Other quantities on request ! New ! Dimensions ( packaging ): 200 x 140 x 60 mm

mytron 160 K CO2 Double Incubator The CO2 Incubator 160 / 160K provides the "in vitro" growing cell and tissue cultures with environmental conditions that are very close to the physiological values of the organism. Interior volume: approx. 160 l Weight: 70 kg Recirculating air circulation: by fan Cooling: Cooling unit Temperature display: Setpoint and actual value display Temperature range: 5 °C above room temperature to 70 °C Temperature range (cooled): +15°C to 70°C at 23°C ambient Temperature constancy: +/- 0.2 K temporal Humidity display: setpoint and actual value display Humidity range: >/=95 % Moisture resistance: +/- 2.5 % CO2 display: setpoint and actual value display CO2 range: 0% to 20% CO2 CO2 constancy: +/- 0.2 % CO2 CO2 recovery time: 1% CO2/min Power supply: 230 V, 50 Hz, 2 x 8 AT WxHxD= 130x85x70 cm More items new and used - you can find them i ...

mytron 160 K CO2 Double Incubator The CO2 Incubator 160 / 160K provides the "in vitro" growing cell and tissue cultures with environmental conditions that are very close to the physiological values of the organism. Interior volume: approx. 160 l Weight: 70 kg Recirculating air circulation: by fan Cooling: Cooling unit Temperature display: Setpoint and actual value display Temperature range: 5 °C above room temperature to 70 °C Temperature range (cooled): +15°C to 70°C at 23°C ambient Temperature constancy: +/- 0.2 K temporal Humidity display: setpoint and actual value display Humidity range: >/=95 % Moisture resistance: +/- 2.5 % CO2 display: setpoint and actual value display CO2 range: 0% to 20% CO2 CO2 constancy: +/- 0.2 % CO2 CO2 recovery time: 1% CO2/min Power supply: 230 V, 50 Hz, 2 x 8 AT WxHxD= 130x85x70 cm Buy incubators and other products at low pric ...

Lippert inclined diverter Inclined inlet saw feed 45° RA1821 Year of manufacture: 2012 Feed angle: 45° (gusset) Nominal/outer width (NB): 570 mm Usable width (NUB): 500 mm Conveyor speed: adjustable Roller diameter: 50 mm Interroll, hexagon incl. compression spring Drive: 1x Drivecontrol 20 with 24V Material: galvanised steel Centre distance: 75 mm Overall height: 130 mm Transport dimensions: L x W x H = 705 x 570 x 130 mm Features: condition: good (used) Construction year: 2012 angle: 45° nominal voltage: 24V Conveying length in mm: 705 Nominal / outside width in mm: 570 Roll width in mm: 50 Roll division in mm: 75 Driven: YES Engine type: Trommelmotor KW: - Ampere: - Conveyor speed m / s: freely adjustable scope of delivery: without supports and side guides For individual, expert advice, simply get in touch with us. Simply contact us by phone or email. We will be happy to help you ...

Controls:KUKA VKRC2 edit 2005 WORKING RANGE -ROBOT-:. - capacity:500 kg - Reach:2825 mm Technical description : 6-axis Industrial Robot with payload of 500 kgs including electrical cabinet operating panel and cable

Controls:KUKA VKRC2 edit 2005 WORKING RANGE -ROBOT-:. - capacity:500 kg - Reach:2825 mm Technical description : 6-axis Industrial Robot with payload of 500 kgs including electrical cabinet operating panel and cable

Technical description : - RAPID ACTION DOOR - Height = 2000mm - Width = 1800mm

Technical description : - RAPID ACTION DOOR - Height = 2000mm - Width = 2000mm

Controls:FANUC 30iA WORKING RANGE -ROBOT-:. - capacity:170 kg - Reach:1520 mm - Number of controlled axes:6 DIMENSIONS / WEIGHTS:. - total weight approx.:800 kg

Controls:FANUC 30iA WORKING RANGE -ROBOT-:. - capacity:170 kg - Reach:1520 mm - Number of controlled axes:6 DIMENSIONS / WEIGHTS:. - total weight approx.:800 kg

WORKING RANGE -ROBOT-:. - capacity:210 kg - Reach:2700 mm

Controls:KUKA KRC 2 WORKING RANGE -ROBOT-:. - capacity:150 kg - Number of controlled axes:6 DIMENSIONS / WEIGHTS:. - total weight approx.:1285 kg

Controls:KUKA KRC 2 WORKING RANGE -ROBOT-:. - capacity:210 kg - Number of controlled axes:6 DIMENSIONS / WEIGHTS:. - total weight approx.:1267 kg

Binder KB 240/E2 Cooling Incubator 0 °C to 100 °C Specifications: - Temperature range: 0°C to 100°C - Capacity: 240 l - Certifications/Conformity: Class 3.1 (DIN 12880) Independent Temperature Safety Device with Visual and Audible Alarm - Number of doors: 2 - Dimensions (D x W x H) Inside: 500 x 800 x 600 mm - Dimensions (L x W x H) Exterior: 800 x 1034 x 1142 mm - Electrical requirements: 240 V, 50 Hz. 4.1 A - Weight: approx. 170 kg - Item no. 9120-0030 More items new and used - can be found in our shop! International shipping costs on request!

Controls:FANUC J3iC WORKING RANGE -ROBOT-:. - capacity:210 kg - Reach:2655 mm - Number of controlled axes:6 DIMENSIONS / WEIGHTS:. - total weight approx.:1240 kg Technical description : 6-axis industrial robot. Payload according to model. Including electrical cabinet operating panel and cable. More KUKA robots in quantities available i.e. # KUKA KR 150 # KUKA KR 210 # KUKA KR 240 # KUKA KR 360

Controls:FANUC J3iC WORKING RANGE -ROBOT-:. - capacity:210 kg - Reach:2655 mm - Number of controlled axes:6 DIMENSIONS / WEIGHTS:. - total weight approx.:1240 kg Technical description : 6-axis industrial robot. Payload according to model. Including electrical cabinet operating panel and cable. More KUKA robots in quantities available i.e. # KUKA KR 150 # KUKA KR 210 # KUKA KR 240 # KUKA KR 360

General SKU354T972 LocationBarneveld MakeYtron TypeYTRON-Z 5,5-2.FC.60.3 Inline homogenizer No.8807631 Year of construction1988 Pressure Working pressure10 Bar Main Features MaterialStainless steel Motor5.5 KW Rotor55 mm Specified Features - Inline mixer Continuous reactorcheck Rotor sizesdia. 55 mm Inlet36 mm Outlet26 mm Number of stages:3 Capacitymax 2500 Ltr./h With mechanical sealcheck Motor5,5 kW 380 Volt Rotor speed2915 rpm MaterialStainless steel 1.4541 (321) Information Mounted on framecheck Mounted on wheelscheck With switchcheck Weight190 kg Floorspace1x0,9 m Total height1,3 m Extra information .Inline high shear mixersYtron ProcessMixers > Inline high shear mixersBrand > Ytron Process What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You ...

General SKUR0162 LocationBarneveld MakeAZO Liquids GmbH (D) TypeContinous Powder Mixing No.111182-01 Year of construction2015 Main Features MaterialStainless steel Motor12 KW Specified Features - Inline mixer MaterialStainless steel Information Total height2,8 M Weight1900 Kg Floor space3,3x1,5 M Extra SpecificationsIncluded 1 X Blender type PMXR material Stainless steel, motor 2,2 kW, with seal barrier system brand Aerni type AFR 168 ZS 8L max pressure 23 bar with liquid circulation pump 0,18 kW 1 x 520 ltr. tank brand Urban type wasserbehalter serial number 15.1606 pressureless, conical bottom, flat top. single-walled, uninsulated, on legs. 1 x Schenk Process powder funnel MechaTron type GRLS 27.070.000.0083 serial number V093547.A01 built in 2015 with a vibrating chute underneath. 1 x ITT Borneman screw spindle pump type SLH-4G-2033 working pressure 4 bar 5.5 kW. 1 x  ...

Type: PI 88 Number of needles: 88 Two pressure pump Needle diameter: 4 mm Max product: width 360 mm Tact per minute: 15 to 55 tact/min. Passage mechanism type: gear rack rail Product passage height: 220 mm Brine pressure: 0,5 to 4,0 bar Electric power: 6.5 kW Machine dimension in cm: Width: 60 Lenght: 210 Height: 190 Delivery time: 30 working days after advanced payment

Type: PI 21 Number of needles: 21 Needle diameter: 4 mm Max product: width 250 mm Tact per minute: 15 to 55 tact/min. Passage mechanism type: gear rack rail Product passage height: 220 mm Brine pressure: 0,5 to 4,0 bar Electric power: 1.5 kW Machine dimension in cm: Width: 70 Lenght: 140 Height: 176 Delivery time: 30 working days after advanced payment

General SKU329S526 LocationBarneveld MakeIndag Maschinenbau GmbH (D) TypeDLM-1/3 HO (S) No.4315 Year of construction2006 Pressure Working pressure6.6 Bar Main Features MaterialStainless steel Motor3 KW Specified Features - Inline mixer Inletdia. 400 mm, dia. 35 mm, Outletdia. 35 mm With jacketcheck Motor3kW 220-240/380-415 Volts With frequency controllercheck Rotor speed400 rpm With vesselcheck Capacity49 Ltr. Vessel sizesdia. 400 x 650 mm With jacket19 Ltr. Max. temperature-10/100 °C MaterialStainless steel 1.4301 (304) Information Mounted on framecheck With switchgearcheck Total height2,5 M Weight450 kg CEcheck Floorspace1,8x0,9 M Extra Specifications With boiler: TWA GmBh &: Co. KG, SN: 015-2006-2542, 49 Ltr., max. working pressure: -0.95/4 bar, max. temperature: -10/100 °C, double-walled: 19 Ltr., max. working pressure: 0/4 bar, max. temperature: - ...

NEW Bainite model BMIM95 95 litre intermeshing type mixer Customs Tariff CN Code: 8477.8093 Manufacturer: Bainite Machines Pvt Ltd Net chamber volume: 95 litre Rotor speed: 6 - 60 rpm Rotor type: HP-5 design (intermeshing) Dust seals: SSA (self-sealing arrangement) Motor power: 420kW, 1000rpm AC motor, 3ph, 50Hz, 380/400V Discharge door: Hydraulic drop door with linear actuator and toggle latch. Two (2) J Type thermocouples mounted in door top as standard One (1) Single acting pneumatically operated oil injector Feed Hopper Assembly: Hydraulically operated Floating weight: single ?V? bottom type Gearbox: Full unidrive type with S.F. 2.25 Bedplate: Fabricated steel Ancillaries: Dust stop lubrication (1.5HP x 2), hydraulic pump unit (20HP) Three (3) Zone closed loop temperature control (TCU) Electrical Controls: Schneider make variable frequency drive (VFD) controls with ...

Qty. 1 Second-hand ingot caster plantMfc.:Sistem TeknikBuilt:1/2015Stopped in 4/2015Recycling capacity:5000 Ton/annumQty. 12 Units of Pyrotek moldsDim. of aluminium ingot: 1000 x 1000 x 500 mmWeight:500 kgCharging material: Aluminium cans, profiles, sheets, motor blocks, wheels etc.Scope of supply:Aluminium shredderMagnetic separator Aluminium de-coating machine Baler Aluminium gas furnace Aluminium casting system Gas generator Mass ARUN spectrometer Air compressor, conveyors, forklift, ect.Shredder and magnetic separation conveyorMfc.:YSSType:Mono shaft shredder J600Capacity:500 kg per hour high power electrical shredding machineMono shaft shredder stylePLC automatic control unit Siemens?Hydraulic unit for material pushing to shredding wheelCurrent control for shredder reverse †safe usageShredded aluminium pass onto conveyor unitMagnetic separation system for steel removalElec ...

1 x Francis Shaw model K7 MK5 intermix, Contract no. 1443, Date: 22.1.98, NR5 Rotors, Net chamber volume 310Litres, Batch size: 217kgs, Hydraulic drop door with linear actuator, Hydraulic hopper, Francis Shaw Unidrive gearbox: Order no. G590304, KW rating 1300, output 46.45 rpm, ratio 25.834/1, 2 x 700kW, 1250rpm DC motor, 3ph, 660V. Currently without controls, hydraulic unit or lubrication.

Werner & Pfleiderer model GK50UK internal mixer. Chamber volume 85 litre, Net volume: 60 litre (batch size approx 85kg), Tangential type rotors, Year of manufacture: 1971, Pneumatic hopper, Hydraulic drop door discharge with rotary actuator and hydraulic latch. Full unidrive gearbox (August Seegers), with Intermediate selectable 2 speed gearbox, 675 HP rating, rpm 1500/1340, Output 895rpm or 1340rpm. With 550kW, 980A, 1482 rpm motor (fixed speed) Rotor speeds - N895 = 51/47rpm, N1340 = 78/72rpm. Siemens PLC controls.

Choice of 2 x Francis Shaw K7 MK3 intermix, Total Volume: 320L, Useful volume 210L, Order number: 6061/1 and 6061/2, Year of manufacture: Oct 1986, NR2 Rotors, SSA type dust seals, Hydraulic drop door with linear actuator, Pneumatic hopper, Zamech full unidrive gearbox, Type: WD263-22.5, ratio 22.5:1. with 1000kW, 990rpm, 6000V motor. Rotor speed 44rpm. With modern starter panel, but without operator controls.

1 x Werner & Pfleiderer model GK90-E intermeshing mixer, Original year of manufacture: 1989, Chamber volume 91 litre, Net batch weight: approx 71kg, PES #3 type rotors, pneumatic hopper, hydraulic drop door, GWK TCU. KWE GmbH full unidrive gearbox input speed 1500rpm, Output speed 48.5rpm with Thrige Electric 470kW, 1520rpm, 380V DC v/s motor, Complete with electrical controls and in good condition.

1 x Werner & Pfleiderer model GK90-E intermeshing mixer, Original year of manufacture: 1989, Chamber volume 91 litre, Net batch weight: approx 71kg, PES #3 type rotors, pneumatic hopper, hydraulic drop door, GWK TCU. KWE GmbH full unidrive gearbox input speed 1500rpm, Output speed 48.5rpm with Thrige Electric 470kW, 1520rpm, 380V DC v/s motor, Complete with electrical controls and in good condition.

Machine type TIG inverter welding system water-cooled DC and AC system Make Merkle Type Insquare 250 W Plant No. 22,351 Connection voltage 3 x 400 volts Setting range 5 - 250 amperes Switch-on time 60% ED at 250 amperes 100% ED at 200 amperes Current setting infinitely variable maximum weldable material thickness steel / VA = 6 mm Aluminum = 4 mm Cooling inverter by built-in fan Cooling burner water-cooled Execution of mobile industrial plant Hedging 16 Ampere Dimensions L x W x H 955 x 515 x 945 mm Weight 120 kg Age approx. 20 years Condition workshop-tested very well incl. UVV test protocol Scope of delivery Welding system with the following accessories: 1 piece TIG burner WHW 20/Z, 4 mtr. Long 1 piece ground cable 1 piece pressure reducer with 2 pressure meters 1 pair of TIG gloves 1 piece spare part box cpl. Equipped  ...

ENGEL Insert 80V/60 year `2011 ENGEL Insert 80V/60 year `2013 ENGEL Insert 80V/60 year `2014 x 5 units Location : Korea

The industrial inkjet printer EBS Ink-Jet EBS-230 was produced in 2014. The printer allows for contactless description of various objects that move, for example, on the frame of the fiber laser or on the production conveyor, etc. It is a large-scale printer (6-116 mm, DOD technology). The printer guarantees a legible and durable print on paper, cardboard, plastics (also so-called porous), on fabrics, leather and imitation leather, wood and wood-like products, on ceramic products (also so-called porous), as well as on various types of surfaces metal, etc. An industrial printer of this type is a so-called adapter for another device. It is mounted, for example, at a laser head or an industrial plotter, which cuts elements, while the printer immediately marks them. Technical specifications : - the height of the prints: 6-12.8 with a 7D head (the height of the letter is adjusted by twisti ...

Packing press 180P2 Inox with hydraulic lifting and vertical device Nominal power up to 1200 kg/h engine power 1.5 (2.0) kW (PS) Electrical connection 400V 50Hz (3 phases) Electrical fuse 16 A Laenge 2250 mm Width 840 mm He 1880 mm Maximum acceptance 1380 mm Weight 1020 kg Material 1.4301 / AISI 304 Press force 50 to Press pressure 270 - 320 bar Juice yield up to 75% Connection for juice drain 1 1/4 High juice drain 420 mm Scope 22 Pressing tummy 100x100cm + 24 press inserts Stainless steel 65x65cm ; New machine - best condition

1 x Francis Shaw model K7 MK5 intermix, Contract no. 1443, Date: 22.1.98 (year 1998), NR5 Rotors, Net chamber volume 310Litres, Batch size: 217kgs, Hydraulic drop door with linear actuator, Hydraulic hopper, Francis Shaw Unidrive gearbox: Order no. G590304, KW rating 1300, output 46.45 rpm, ratio 25.834/1, 2 x 700kW, 1250rpm DC motors, 3ph, 660V, 50Hz. The mixer is in serviceable condition, but is without electrical drives/operator controls, hydraulic unit or lubrication unit (Can all be quoted if required). Full manuals/drawings available. Available: Immediately (ex stock UK).

QTY 1: New Bainite make 95 litre intermeshing type mixer Model: BMIM95 Intermeshing mixer with hydraulic hopper Net chamber volume: 95 litre Rotor speed: 6 – 60 rpm Rotor type: HP-5 design (intermeshing) Dust seals: SSA (self-sealing arrangement), Motor power: Siemens 420kW, 1000rpm AC squirrel cage motor with Siemens G150 VFD, Discharge door: Hydraulic drop door type with linear actuator and toggle latch mechanism, Feed Hopper Assembly: Hydraulically operated, Floating weight: single ‘V’ bottom type, Gearbox: Elecon Full unidrive type with S.F. 2.25. Bedplate: Fabricated steel, Ancillaries: Dust stop lubrication (1.5HP x 2), hydraulic pump unit (20HP) Electrical Controls:  Siemens G150 variable frequency drive controls. Operator control panel with Siemens PLC and HMI.

1 x Francis Shaw model K1 Intermix MK4, M/c number: 4176, Date: Jan 1991, Net chamber volume: 5.5litres, NR2 style intermeshing rotors, Pneumatic hopper, Hydraulic drop door discharge, with Thrigge Scott 45kW DC variable speed motor. 2 x Tool Temp temperature control units. The mixer has been completely dismantled and the rotors, door top, drilled sides and floating weight have been refurbished and re-chromed.  All other components checked, serviced or replaced during re-assembly.  The mixer will be supplied with NEW control panel with PLC, touch screen PC with data capture.

Te Koop: Emec Contrôle instrument ph meters. Strumento. Type: 0000GO3ONOO LPH 230 VAC. Ph incl. 12 meter cable.

Te Koop: Etatron Contrôle instrument PH meters. DS Type: E.CO. PH. Combined with PH: max 6 bar. 50 m ohm of coaxial cable. Is geheel compleet.

Te Coop: Vega sensor circuit signal conditioning instrument gate 636ex PTB ex-96.D. 2068

Industrial Container Box 650 liters New goods, large crates, stacking containers, large containers, see pictures L 120 x W 100 x H 78 cm 650 liters volume Net weight 43 kg Colour grey Up to 4000 kg load capacity in stack (at 5° room temperature) 2 runners, also suitable for shelf storage Also closed version available. Liquid-tight, drain valve possible 200 pcs available Negotiation price: € 145,-- net per piece ex stock Larger quantities on request! Goods are in stock. Transport available on request. Viewing possible at any time by appointment. Further information on request. Constantly over 5000 lfm pallet racks from numerous manufacturers in stock. (Changes and errors in the technical data, information and prices as well as prior sale reserved! See our terms and conditions, all prices excl. VAT ex stock) Purchase / Sale We are constantly lo ...

Type: PR 15 Number of needles: 15 Needle diameter: 4 mm Max product: width 270 mm Tact per minute: 15 to 55 tact/min. Passage mechanism type: gear rack rail Product passage height: 220 mm Brine pressure: 0,5 to 4,0 bar Electric power: 1.5 kW Machine dimension in cm: Width: 50 Lenght: 125 Height: 150 Delivery time: 30 working days after advanced payment

Cutting discs, new, various dimensions. Flat and depressed. Original packaging. List exists. Price â?¬ 1,20 / kg

1 x Francis Shaw model K4 intermix, Machine number: 4549, Original Year of manufacture:1992, Chamber volume: 91 litres, Batch weight: approx 76kg (at 70% F.F. and 1.2 S.G), Hydraulic hopper, Hydraulic drop door with linear actuator, Full unidrive David Brown gearbox - power rating 450kW, ratio 29.065:1 (input speed 1500rpm, output 51rpm), In good condition, but currently without motor or controls. Manuals/drawings available.

Filler/sealer Make: KHS Type: Innofill DR 132/ 24/24 Built: 1996 Power: 50000 Fl./h Filling product: ier Bottle size: 0.5 glass bottle Bottle diameter: 78mm Number of filling valves: 132 Number of locking devices: 24 SV (Alcoa), 24KK ( KHS) Running direction: Left-right Control: Siemens S5 - Fill height adjustment - Cork mill - Extended pre-table - CIP tulips currently still in operation, can be visited, available from 01.03.2020