machining used for sale

HAAS VF-0 Vertical Machining Center YOM 1998 Table 660x356 mm X/Y/Z 508/406/508 mm Spindle speed 0-7500rpm Spindle motor 14.9kW Rapid feed rate 18m/min Tool Capacity 20 Max. part weight 340.3 kg Spindle taper BT40 Machine Weight 3175Kg Remark: The machine had worked small parts in the production of hunting and sporting rifles. Mechanically OK, Defective a cirquit board

Manufacturer: Chiron Model: FZ15 S High Speed Year of Manufacture: 2007 Operating Hours: 48,000 h Find more here - / Contact us at -

Horizontal machining center, 6 pallets, Priced to sell - dismantled and loaded into truck, OKUMA MA40 HA 6P OSP U100M CNC 6 pallets 400mm x 400mm max 400 kgs max workpiece dimensions 600710 Spindle BT40 / coolant through the spindle 4th axis 1° Tool changer: 100 pos. X = 560mm, Y = 610mm, Z = 560mm 40 m/min under power Mimu Machine Tools (Italy), X: 560, pallet: 6, Pallet size: 400400

Key data: 6800 mm, 1400 mm, 650 mm

Five-axis CNC for staircase construction Timber construction with vacuum pump Treversening table Two 12-fold tool changers and 2 additional places for saw blades up to 450mm diameter

x-travel: 1050 mm y-travel: 560 mm z-travel: 510 mm table-size: 1200 x 560 mm spindle taper ISO: 50 turning speed range: 15 - 4000 U/min feeds longditudinal/cross/vertical: 1 - 3000 mm/min rapid motion -longitudinal/cross/vertical: 10 m/min distance spindle nose and table: 150 - 660 mm distance spindle center to column: max. 650 mm table load: max . 1 t no. of tools in magazin: 24 tool diameter: 110 mm workpiece length: 350 mm weight of tools max.: 15 kg spindle drive: 7,5 kW control: FANUC 11 MA total power requirement: 13 kW weight of the machine ca.: 9,3 t dimensions of machine L x W x H: 3,55 x 2,64 x 2,68 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manufacturer: CMS Model: Avant-1/B-560-TX3/RR with a digital table Year of Manufacture: 2006 Type of Machine: 4-axis CNC machining center with a moving bridge - Moving bridge design with two racks. Fixed table during machining. - Welded steel support frame stabilized by double heat treatment - Mobile bridge supporting a set of two crossed slide carriages for transverse and vertical movement - Travels: o X axis: 5600mm o Y axis: 2050 mm o Z axis: 300 mm - Working and positioning speed: o X axis from 0 to 60 m/min, positioning speed of 60m/min o Y axis from 0 to 100 m/min, positioning speed of 100m/min o Z axis from 0 to 30 m/min, positioning speed of 30m/min - Automatic centralized lubrication - TX3 vertical head with tool changer mounted on Z-TX3/12/L vertical carriage o Head power: 15kw at 18000 rpm o Programmable rotation speed of 1800 to 24000 rpm o HSK63E cone - 2 ...

Key data: 4050 mm, 2600 mm, 1070 mm

Hartford PRW 426L CNC Double Column Vertical Machining Center CNC control Heidenhain iTNC 530 Table size 4200 x 2040 mm Table load 15,000 kg Number of pallets: 1 Travel X-Y-Z axis: 4050 / 2600 / 1070 mm Spindle taper DIN 69871a-SK 50 Spindle speed 6,000 rpm Number of tools in the magazine: 60 pieces If you have any questions about the machine, as well as an appointment for a viewing, please contact us by phone or e-mail.

The machine is visible in our warehouse in Gussago BS. Mimu Machine Tools Gussago BS Italy The machining center is a machine tool equipped with a numerical control capable of performing multiple mechanical operations with a single set-up on multiple surfaces of the same work piece. It is generally equipped with several motion axles and one automatic tool exchange system and sometimes multiple pallets

Key data: 1050 mm, 510 mm, 560 mm

Mazak MTV 515/40N CNC Vertical Machining Center CNC Control: Mazatrol 640M Table size: 1300 x 550 mm Table load: 1500 kg X-axis travel range: 1050 mm Y-axis travel range: 510 mm Z-axis travel range: 560 mm Spindle taper: MAS BT 50 Spindle speed: 25 - 6000 1/min. Magazine capacity: 30 positions Machine weight: 8900 kg If you have any questions about the machine, please do not hesitate to contact us by phone or e-mail. Feel free to check out our other ads for a full overview of our stock.

Key data: 730 mm, 730 mm, 740 mm

Mazak HC Nexus 5000-ll CNC Horizontal Machining Center CNC Control Mazatrol Matrix Pallet table size 500 x 500 mm Number of pallets 2 Table load 700 KG Travel X-Y-Z axes 730x 730x740 mm Table Indexing 0.001° Spindle taper DIN 69871A-40 Spindle speed 18,000 1/min Spindle motor 35-26 kW Mazgazin capacity 80 If you have any questions about the machine, as well as an appointment for a viewing, please contact us by phone or e-mail.

Key data: 730 mm, 730 mm, 740 mm

Mazak PFH 5800 (10 Pallet) CNC Horizontal Machining Center CNC control Mazatrol 640M Pallet table size 500 x 500 mm Number of pallets 10 Table load 700 kg X-axis travel 730 mm Y-axis travel 730 mm Z-axis travel 740 mm Table indexing 360 x1° Spindle taper CAT 40 Spindle 12,000 1/min Spindle motor 22/15 kW Magazine capacity 80 Required footprint 9850 x 10145 mm If you have any questions about the machine, please do not hesitate to contact us by phone or e-mail. Feel free to check out our other ads for a full overview of our stock.

Spindle Controller FRSGJ-2-5,5-B-N , AC Spindle Motor SJ-VL 5,5-05 , Servo Drive MR-S1-80-E01 , Servo Drive FRSFJ/SGJ-2-5,5K./,5K MC 713/727 , MC161-1 , MC303 , MC301 , MEM_AMC433

Key data: 1020 mm, 510 mm, 510 mm

Machine Details Stock number 1105-04058 Machine Type Machining Center - Vertical Make DOOSAN DAEWOO Type MYNX 540 Year of construction 2002 Condition Control type: CNC Storage location HAGUENAU FRANCE Country of origin KORREA Delivery time IMMEDIATELY Ex-works freight base Technical details longitudinal 1020 mm landscape 510 mm vertical 625 mm Tool Changer 30 Pos. max. tool length 250 mm max. tool diameter 80 mm max. tool diameter. with a free neighboring box. 130 mm Rapid traverse 30 m/min Machine weight approx. 7 t Drive power 100% ED 15 kW Drive power 40 % ED 13 kW Speed range 8000 1/min Tool holder SK 40 Table surface 1200 x 500 mm Permissible load (centre of the table) 800 kg Information FANUC 21 M B El. Handwheel Conveyor 8000 RPM 30 SPEED ATC BT 40

Key data: 700 mm, 600 mm, 450 mm

Machine Details Stock-No. 1105-04059 Type of machine Machining Center - Vertical Make HURON Type KX 8 Year of manufacture 2001 Type of control CNC Storage location HAGUENAU FRANCE Country of origin FRANCE Delivery time IMMIDIATELY Freight basis EX WORKS Price Technical details x-travel 700 mm Y-Travel 600 mm Z-Travel 450 mm Feed speed x,y,z; 0 - 24 m/min. surface area 1250 X 700 mm table load 1 t spindle turning speed - stepless 24000 rpm power capacity at 100 % load 20 kW Spindle Taper HSK 63 Spindle diameter 90 mm tool change unit 20 places; distance between columns 800 mm control SIEMENS 840 D Additional information VERY NICE MACHINE CONTROL siemens 840 d SPINDLE RPM 24000 new in 2024 hsk 63 MAGASIN 20 TOOLS hsk 63 COOLING TROUNG THE SPINDLE

Weight: 350 kg Dimensions (L/W/H): 1930,0 × 1850,0 × 2490,0 mm x-axis: 610 mm y-travel: 305 mm z-travel: 520 mm table length: 760 mm table width: 360 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

X,Y,Z Travels 630,530,465 mm Spindle speed 18.000 rpm Tool holder SK40 Number of tools 32 Controller Heidenhain iTNC 530 With Tool and workpiece measuring probe With chip conveyor

Key data: 350 mm, 250 mm, 200 mm

• Brother milling machine – TC 31 machining center (2 pieces, fig. 1) Year of Make: 2007 Travel X: 350 mm Travel Y: 250 mm Travel Z: 200 mm Spindle speed: up to 22,000 rpm Spindle cone: BT30 Work table: 500 x 270 mm Wz – Magazine: 26 seats Special feature: Table designed as a rotary changer, loading clamping holder via magazine and ABB robot

Manufacturer: DMG GILDEMEISTER Model: CTX 310 ECOline Year of Manufacture: 2009 Control System - Siemens Sinumerik 810 D Application - Precision machining of workpieces with a maximum diameter of 200 mm. Features - 12-station turret - Integrated chip conveyor - Workplace lighting - Foot switch - Documentation: DTR Technical Data:  Max. turning diameter: 200 mm Max. pass-through diameter: 330 mm Max. pass-through diameter over cross slide: 260 mm Feed rate in X/Z axis: 160/450 mm Speed in X and Z: 24 mm/min Max. spindle speed: 5000 rpm Spindle bore: 51 mm Spindle drive power (40%/100% DC): 16.5/11 kW Max. spindle torque (40%/100% DC): 166.5/112 Nm Tailstock stroke: 400 mm Tailstock force: 400 daN Operating hours (as of 06.03.2025, still in operation): 48,066 h Installed power: 21 kVA Power supply: 400 V; 50/60 Hz Dimensions (L x W x H): approx. 4150 x 1700 x  ...

Key data: 1660 mm, 510 mm, 510 mm

For sale: Mazak vertical machining center type VTC-20C with a Mazatrol M Plus controller. X, Y and Z axis movement is 1660 x 510 x 510 mm. Table size. 2000 x 510 mm. Speed range 40 -7,000 rpm. Spindle holder ISO-40. The machining center is equipped with cooling by the spindle. Tool changer with 2 x 24 positions. The machining center is still in good condition. Still to be seen under power, intermediate sale reserved

Key data: 800 mm, 500 mm, 560 mm

Machine Details Stock-No. 1105-04061 Type of machine Machining Center - Vertical Make VICTOR Type VCENTER 80 Year of manufacture 1996 Type of control CNC Storage location HAGUENAU FRANCE Country of origin Taiwan Delivery time to be agreed upon Freight basis EX WORK Price Technical details X-Travel 800 mm Y-Travel 500 mm Z-Travel 560 mm feed speeds x/y/z axis 18 m/min distance spindle center to column: 600 mm tool taper BT-40 spindle drive 5.5 / 7.5 kW spindle turning speed - stepless 8000 rpm table dimensions (lengthxwidth) 950 x 500 max. table load 750 kg Tool Magazine: 32 max. workpiece weight 7 kg Additional information Including accessories, tool tapers, , tools and documentation. FANUC OM chip convoyer

Qty. 1 Second-hand sheet metal processing machine Mfc.: Vernet Behringer Type: FG2005 CNC Built: 2012 Limits of sheet metal dimensions to be machined Min. section: 100 x 100 x 5 mm Max. section: 2000 x 1000 x 40 mm Max. section: 1340 x 1000 x 60 mm Electrical Cabinet Power supply: 3 x 380 V, 50 Hz, Control voltage: 24 V DC Installed power: 90 kVA Hydraulic unit: 15 l/min Central motor power: 4 kW Medium pressure: 130 bar

x-travel: 1250 mm y-travel: 650 mm z-travel: 600 mm total power requirement: kW weight of the machine ca.: t required space: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

5-axis machining center Mori Seiki NHX 5000 Year of construction 2011 (bought new in 2013) Hours10768 Processing time 7172 hours Electricity one hour 29288 With few operating hours, used only for single part to small series production, mainly for special mechanical engineering The specifications are as follows: Travels: Cylinder Ø 500 x 700 Control M730BM (Mapps2) Speed 10,0000 rpm. Tool holder SK40 DIN 69871 Tool changer 60-fold Pallet changer 2-fold Accessories: Documentation Internal cooling Knoll 50 bar Conveyor Activation to 400 tool positions Pine pallet with long zero point clamping system Lang tensioning tower approx. 100 pieces of tool holders SK40 An on-site inspection is possible at any time by appointment.

x-travel: 600 mm y-travel: 410 mm z-travel: 520 mm control: Siemens type: 840 D Tool changer: 30 Pos. spindle taper: ISO: 40 spindle turning speed range: 40-6000 U/min table surface area: 840x420 mm Table load: 500 kg spindle power: 8,5 kW total power requirement: 15 KVA weight of the machine ca.: 2,7 t dimensions of the machine ca.: m Machine has 4 axes The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit ...

CNC controller: HEIDENHAIN TNC 430 Axes X-axis travel mm: 600 Y-axis travel mm: 450 Z-axis travel mm: 500 Distance spindle nose - table surface mm: 573 Rapid traverse m/min: 10 Worktable Number of pallets: 1 Table dimensions mm: 800 x 465 Maximum workpiece size (D x H) mm: 900 x 528 Max. workpiece weight kg: 450 (500 in large workpieces) T-Slot version: 14 H7 Spindle Spindle speed rpm: 6.300 Spindle drive power kW: 8,6 Bearing Inner Diameter mm.: 70 Tool system Tool holder: SK 40 Tool magazine slots: 34 Max. Tool Diameter: 90 With free neighboring places mm: 125 Tool Magazine: UTC 34 Max. Tool Length mm: 250 Max tool weight kg: 8 Equipment Electronic Handwheel Rinsing gun Tool breakage probe Workarea light CE conformity Cooling Tank capacity: 170 L High-pressure bar: 40L / min Machine running times Rated power kVA: 16  ...

Manufacturer: Biesse Model: C6.50 WMS Year of Manufacture: 2009 Type of Machine: Machining center with automatic loading Working Field: - X-axis: 6400 mm - Y-axis: 1650 mm - Z-axis: 350 mm Drilling Head: - Vertical spindles: 16 - Horizontal spindles: 6 (X and Y directions) - Integrated grooving saw on X-axis Electrospindle: - 1x HSK F63, 13.2 kW, air-cooled - 0–24,000 RPM Tool Changer: - Rotary 16-position tool changer Worktable: - ATS (Advanced Table Setting) with manual positioning pods and rails Control System: - NC 500 / XP600 with BiesseWorks software Safety: - Full perimeter safety bumpers with sensors Vacuum System: - High-capacity vacuum pump for strong hold-down Find more here - / Contact us at -

Takumi H16 Machining Center :::TECHNICAL SPECIFICATIONS::: CNC model: Fanuc - CNC version: 18i MB - Tool holder: iso 40 - Spindle speed: 16000 Number of tools: 26 - X-axis travel: 1600mm - Y-axis travel: 1300mm - Z-axis travel: 700mm Fast feeds for linear axes X Y Z: 24m/min Table dimensions: 1900 x 1300mm Table capacity: 8000Kg Gantry type: Gantry with fixed upright moving table Chip conveyor: belt Presetting: yes Machine equipment: spindle overhauled in May 2024 :::D DIMENSIONS AND WEIGHT::: Length: 3500mm Width: 3500mm Height: 3700mm

CNC Machining Center Weeke Homag Optimat BHC 250 Masch. No. 0-250-08-1834 Year of manufacture 2004 Kleies machining center in good mechanical condition. Ideal for kitchen and cabinet production. No collisions. No repairs in the last 15 years. Rock solid machine that never caused any problems. Dimensions set-up: approx. 5.4 x 3.5 m Light barrier as safety No unevenness due to step mats Electric cabinet with fan Milling spindle air-cooled. Incl. 2 slide end mills. Z maximum 55mm Various drill bits: 3 mm, 5 mm, 8 mm, 15 mm, 35 mm. Grooving saw in X. Changer 5 places. Processing dimensions: approx. 2.19 x 0.92 m 100 m3 vacuum pump Inspection possible, but the machine is no longer connected. The computer "PC" must be replaced, as it no longer starts. Replacement costs estimated at approx. EUR 6,000.00. Otherwise, the machine is in very good condition. If yo ...

Control: Heidenhain iTNC530 Travel: X-axis: 4,000 mm Y-axis: 1,200 mm Z-axis: 1,300 mm Horizontal A-axis: 0-135° B-axis: +-106° NC rotary table: 1,250 mm with 50 rpm Fault circuit Ø: 1,600 mm, 50 rpm with Tork drive Tool magazine: 60-fold Tool holder: HSK 100 Motor spindle: 15,000 rpm / 90kW Accessories -Conveyor - 5-axis simultaneous package - Last major maintenance in 2023 -Suction - IKZ 70 bar - 3D probe with radio - Tool breakage detection - Handwheel with radio HR 550 FS

Key data: 6200 mm, 1300 mm, 300 mm

SPECIFICATIONS: Workspace: X: 6200 mm Y: 1300 mm Z: 300 mm 08 Clamping Plates with Suction Cups 01 Side tool magazine Turret tool magazine with 18 compartments Side stops (3 right + 3 left) 01 Vacuum pump: 250 m³ Siemens control system 18 spindles for vertical drilling 02 Double-sided spindles for horizontal drilling - X-axis 01 Double-sided spindle for horizontal drilling - Y-axis 01 Electrospindle 12 kW HSK water-cooled coupling 4-axis cutting/milling unit

Key data: 3060 mm, 1260 mm, 150 mm

SPECIFICATIONS: Workspace: X: 3060 mm Y: 1260 mm Z: 150 mm 03 Axles Automatic lubrication system 06 ATS tables (length: 1200 mm) 018 Track rollers 06 rear stops 06 stops at height 970 mm Side stops (2 right + 2 left) 04 Bar lifter Turret tool magazine with 10 places 01 Drill head BH 21 L (7x+7y vertical - 4x+2y horizontal - x-axis knife) 01 Air Cooled 12kw Electrospindle HSK F63 Coupling 01 Becker vacuum pump: 100 m³ SYSTEM: Biesse Works XP600 Controller EQUIPMENT: Carpets and barriers Various tools

Control: Heidenhain iTNC 530 Year of Make: 2009 Travel: X-axis: 650 mm Y-axis: 700 mm Z-axis: 700 mm B-axis: 360 C° Recording: 40 ISO Tool magazine: 120-fold Speed: 12,000 rpm Conveyor Coolant system with filter 600 L and 40 bar 2-fold pallet changer 3-D Probe (Renishaw) Blum Laser New Weiss spindle in 2022

Control: Siemens Sinumerik 840 D Travel: X-axis: 800 mm Y-axis: 1,050 mm Z-axis: 850 mm Mount: HSK 100 Tool magazine: 60-fold Gear spindle: 8,000 rpm Workpiece diameter max.: 900 mm Max. workpiece height: 1,450 mm Conveyor Coolant device with low-bed filter Coolant supply through the spindle 2-fold pallet changer 3-D Probe (Renishaw) Blum Laser Aspirator

Key data: 3000 mm, 920 mm, 50 mm

CNC Drilling Center C-Express Classic Drilling/sawing/milling from below Easy operation via graphical user interface 1 Machine Software License 19" LCD color display, mouse keyboard Machine weight 850kg Machine dimension: 2,100x1,500x1,950mm Milling spindle 3.3kW (S1), 24,000rpm Collet ER32 manual Drill Head DH 15 6H1S 9 vertical drilling spindles 6 hotizontal drilling spindles 1 grooving saw X direction More information on request! Safety FELDER KG KR-Felder-Straße 1 6060 HALL IN TIROL Phone: +43 (0)5223 58500 Infofelder-Group

Control Heidenhain ... TNC 530 Clamping table surface ... 600x1000mm Axis X ... 630mm Axis Y ... 560mm Axis Z ... 560mm Spindle speed ... 0-12000 rpm controlled axes ... 5 cooling HSK 63 Table diameter ... 600mm Magazine spaces ... 24 Main engine power ... 15/10kW Max. workpiece weight ... 500kg The machine is in good condition, possible to test under power.

CNC Machining Center Hedelius BC 100 P-3500 Magnum Control: Siemens Sinumerik 840D Travel: X-axis 3,500 mm Y-axis 1,000 mm Z-axis 770 mm Clamping area 4,150 x 1,000 mm T-slots 5 pieces Distance T-slots 200 mm Table height above floor: 730 mm Table load: approx. 4,000 kg Mount: DIN 69871 SK 50 Tool magazine: 50 – compartment Spindle speed: 20 - 4,500 rpm Accessories - Door automation - Handheld operator - Machine hood -Conveyor

Manufacturer: Hüller Hille Model: NBH 170 Year of Manufacture: 2000 Type of Machine : 4-Axis Horizontal Machining Center Technical Details: - Travel Path: 1000 x 800 x 800 mm - Spindle: HSK-A100, 8,000 rpm - Automation: Rotary pallet storage system with 7 pallets - CNC Control: Siemens 840D - Tool Capacity: 200 tools - Condition: Fully overhauled in 2022 Find more here - / Contact us at -

CNC controller: HEIDENHAIN iTNC 530 Axes X-axis travel mm: 700 Y-axis travel mm: 700 Z-axis travel mm: 700 Distance spindle nose - table surface mm: 100 - 800 Rapid traverse m/min: 60 Acceleration in the axes m/s2: 6 / 6 / 5 Worktable Number of pallets: 2 + 5 Table dimensions mm: 500 x 500 Maximum workpiece size (D x H) mm: 800 x 1.000 Max. workpiece weight kg: 600 T-Slot version: DIN 55201-A2 APC time s: 9,5 División estandar Grados: 360º (1º) Spindle Spindle speed rpm: 18.000 Spindle drive power kW: 34 / 28 Spindle torque Nm: 110 Tool system Tool holder: HSK-A63 Tool magazine slots: 120 Max. Tool Diameter: 80 Max. Tool Length mm: 550 Max tool weight kg: 12 Chip-to-chip time s: 2,9 Equipment Electronic Handwheel Chip conveyor Rotating inspection windows Rinsing gun Signal lamp Tool breakage probe 3D quickSET Workare ...

Control HEIDENHAIN TNC 430 Spindle speed 20 - 9,000 1/min Travel X= 500, Y= 400, Z= 400 mm Tool holder SK 40 Tool changer with 16 stations Rotary table with B and C axis Clamping surface Ø 700 x 500 mm max. table load 200 kg Infrared Probe Workpiece Measurement

HEDELIUS BC 40 MACHINING CENTER - X 1600 mm - Y400 mm - Z 400 mm SK40 HEIDENHAIN control system

axis stroke (X,Y,Z): unbegrenzt, 1000, 60 mm Number of spindle head vertical: 10 St. Number of spindles head horizontal: 6 St. milling motor: 4,5 kW CNC machining center at a Special PRICE! MASTERWOOD TF 100 2.0 Partnership Edition Furnishing: ----------------------------------------------------- - Drilling head with 16 drills for 5-sided machining - Grooving saw unit - Milling unit with 6-fold tool changer - incl. grooving saw blade, 2 diamond cutters, 1 WPL finishing cutter - Preparation for CLAMEX and door package - 2 foldable roller conveyors - program-controlled central lubrication ----------------------------------------------------- SPECIAL PRICE 44,990.00 euros (plus VAT) ex works ----------------------------------------------------- Freight, installation, instruction within Germany including 8-hour training individually and on site SPECIAL PRICE 3,000.00 euros (plus VAT) Partne ...

overhauled: 2024 Control Heidenhain ... TNC 620 Clamping table surface ... 1300 x 600mm Axis X ... 1016mm Axis Y ... 610mm Axis Z ... 660mm Spindle speed ... 0-10000 rpm controlled axes ... 3 cooling... 20bar ISO 40 L x W x H ... 2700x3000x2940mm Machine weight... 5500kg Magazine spaces ... 20 The machine has undergone a complete overhaul. More info on request.

Key data: 1600 mm, 1600 mm, 1200 mm

Brand : OKK Type: VP1200 CNC Brand: Fanuc CNC Model: 160is-MB Year of Make: 2004 Table length: 1,600 mm Table width: 1,300 mm X: 1,600 mm Y: 1,300 mm Z: 550 mm Projection: 560 mm Tool Changers: 40 Minimum speed: 100 RPM Maximum speed: 12,000 RPM Max. workpiece diameter: 82 mm ø Maximum table load: 2,000 kg Further information can be found in the pdf file Machine size: 5,800 x 3,200 x 2,800 mm Machine weight: 16,000 kg

Key data: 500 mm, 450 mm, 400 mm

Brand DMG Mori Seiki Machine No: F652 Type DMU 50 Ecoline Control Siemens 840D Year of construction 2012 Table width 500 mm Table diameter 630 mm ø Table adjustable in degrees X 500 mm Y 450 mm Z 400 mm Spindle Taper SK40 Minimum speed 20 RPM Maximum speed 10,000 RPM Maximum table load 200 kg Chip transport Machine size 3,400 x 2,500 x 2,200 mm Machine weight 4,700 kg Magazine slots: 30 B-axis: +110/-5° C-axis: 360° Engine power: 13/9 Kw

Key data: 635 mm, 510 mm, 460 mm

Brand DMG Mori Seiki Machine No: F666 Type DMC 635 V Ecoline Control Siemens 840D Year of construction 2012 Table length 790 mm Table width 560 mm X 635 mm Y 510 mm Z 460 mm Spindle Taper SK40 Maximum speed 12,000 RPM Chip transport Machine size 3,400 x 2,400 x 2,800 mm Machine weight 3,950 kg Magazine slots: 30

x-travel: 635 mm y-travel: 510 mm z-travel: 460 mm Control: DMG total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

CNC Machining Center Kunzmann WF 650 Control: Heidenhain iTNC 640 Year of Make: 2017 Travel: X-axis 650 mm Y-axis 500 mm Z-axis 450 mm Manual swivel of the milling head: -5° / + 95° Round table top: Ø 400 mm Centering hole: Ø102 H7 A-axis (swingarm): +/- 30 s C-axis rotary table: +/- 10 s Swivel range A-axis: -120/-95° C-axis rotation range: 360° rotation Mount: SK 40 DIN69871 Tool magazine: 60-fold Spindle speed: 1 – 12,000 rpm Accessories - Coolant system - IKZ with high-pressure pump - Electronic handwheel -Conveyor - 3D probes

A DMG CNC universal machining center is available. Travel X/Y/Z: 780mm/560mm/560mm, spindle speed: 12000/min, tool places: 60, tool holder: SK40, table: rotary table, milling head: swiveling, pallet capacity: 5, pallet dimensions X/Y: 630mm/500mm, control: Heidenhain MillPlus IT, operating hours: 42603h, spindle hours: 20137h. Including rotary pallet changer, BLUM laser, TS 641 3D measuring probe, chip conveyor, 40bar IKZ, 900l coolant tank and Rotoclear. Documentation available. On-site inspection is possible.

Travel X/Y/Z: 1050mm/800mm/560mm, C-axis: 360°, spindle head swivel range: -10°/110°, speed: 18000rpm, spindle power: 25kW/35kW, table diameter: 950mm, table load capacity: 800kg, max. workpiece height: 500mm. Tool positions: 30, tool holder: HSK A 63, max. tool diameter: 80mm/130mm, max. tool length: 250mm, rapid traverse: 90m/min, feed: 20m/min. Control: Heidenhain iTNC 530, operating hours: 117490h, spindle hours: 18086h. Including chip conveyor, IKZ, distance measuring system, Blum laser and measuring probe. Documentation available. On-site inspection is possible.

Travel X/Y/Z: 1050mm/800mm/560mm, C-axis: 360°, spindle head swivel range: -10°/110°, speed: 18000rpm, spindle power: 25kW/35kW, table diameter: 950mm, table load capacity: 800kg, max. workpiece height: 500mm. Tool positions: 30, tool holder: HSK A 63, max. tool diameter: 80mm/130mm, max. tool length: 250mm, rapid traverse: 90m/min, feed: 20m/min. Control: Heidenhain iTNC 530, operating hours: 113894h, spindle hours: 13349h. Including chip conveyor, IKZ, distance measuring system, Blum laser and measuring probe. Documentation available. On-site inspection is possible.