machining used for sale

The machine is in good technical condition, after prior agreement it is possible to test it. Table working area W x D (mm) 1000 x 510 T-slots (DIN 650) 5 x 18 x 100 Max. load (kg) 2000 Travels: X axis (mm) 750 Y axis (mm) 500 Z axis (mm) 510 Spindle taper (DIN 69871 A) SK40 Spindle power (kW) 18 Rapid traverse X/Y/Z axes 32/32/24 Maximum spindle speed (rpm) 12000 Automatic tool changer: Number of positions 30 Tool diameter max. (mm) 80/75 Tool length max. (mm) 300

Offered is a Röders RXP 500 high-precision milling machine year 2005, approx. 160763h, spindle approx. 100000h incl. HSK-25 high-frequency spindle with 50000rpm, 42-fold chain magazine, HG sensor, high-accuracy option incl. spindle cooling as well as Renishaw probe, machine weight approx. 5500kg. Viewing is possible by arrangement.

Specifications: Travel X/Y/Z: 600 / 600 / 700 mm Motor power: 15 kW (40% ED); 10 kW (100 & ED) Speed: 18,000 1/min Tool holder: SK 40 SK 40 magazine slots: 60 Equipment: - MillPlus IT 3D path control - Horizontal tool changing device Double gripper - Automatic swivel milling head - Rotating viewing panel - NC rotary table with pallet carrier - Rotary pallet changer - 2 pallets 630 x 500 mm - Universal milling head with controlled B-axis SK 40 (only in combination with motor spindle SK 40) - Tool holder for HSK-A63 according to DIN 69893 - Electronic handwheel - Mode 4: Advanced manual intervention - Flushing gun with pump - Tool breakage detection SK 40 mechanical design, range: 63...310 mm / +/- 3 mm - Interval switching chip conveyor - Internal coolant supply can be switched from 40 bar to 80 bar

Offered is a Röders RXP 300 high-speed machining center, year 2010, machine hours approx. 120648h, spindle hours approx. 71200h, HSK-25 high-frequency spindle 50000rpm, HG sensor, high-accuracy package incl. spindle cooling, Renishaw probe, bar magazine with 18 tool stations. An inspection is possible by appointment.

x-travel: 700 mm y-travel: 590 mm z-travel: 480 mm Control: HEIDENHAIN ITNC 530 table weight: 265 Kg a-axis: ±110 ° c-axis: 360 ° rapid travel x/y/z: 32.000 mm/min feed: 15.000 m/min number of spindle speeds: 10.000 U/min/rpm spindle taper: BT - 40 spindle drive: 15/33 kW Torque: 192/189 Nm tool change unit: 32 pos. Working hours: 13.975 h Spindle hours: 6.258 h total power requirement: 30 kva weight of the machine ca.: 8,2 t dimensions of the machine ca.: 2.220 X 2.650 X 2.855 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

WORKING RANGE -CUBIC-   X-axis travel: 1270 mm   Y-axis travel: 660 mm   Z-axis travel: 635 mm SPINDLE / HEAD   spindle revolutions (max): 7500 /min BASIC FUNCTIONS   number of spindles: 1   number of turrets: 0   live positions: yes   number of c-axes: 0   number of y-axes: 1   number of b-axes: 0 ATTACHMENTS   chip conveyor: yes WORKING RANGE TURNING   swing diameter (max): 635 mm   worpiece length max.: 1372 mm   workpiece weight max.: 1814 kg MAIN SPINDLE   spindle revolutions (min): 0.001 /min   spindle revolutions (max): 7500 /min X/Z SLIDE   Z-axis travel: 635 mm   X-axis travel: 1270 mm   Y-axis travel: 660 mm TOOL MAGAZINE   tool diameter max.: 178 mm   tool length m ...

Key data: 5800 mm, 39000 mm, 1200 mm

Multiax L-Series CNC Gantry Milling Machine Large 5-axis gantry milling machine with moving-bridge and low-rail open design, ideal for machining long or oversized workpieces. Travels: X 5800 mm, Y 39000 mm, Z 1200 mm. Equipped with a high-speed spindle for machining composites, aluminum, plastics, wood and non-ferrous metals. The modular heavy-duty design offers high rigidity, precision and allows for easy loading and unloading by crane or forklift. Suitable for mold making, prototypes, marine and aerospace components, and large structural parts.

Key data: 730 mm, 730 mm, 740 mm

CNC Horizontal Machining Center CNC control Mazatrol Matrix Nexus Pallet table size 500 x 500 mm Number of pallets 2 Table load 700 KG Travel X-Y-Z axes 730x 730x740 mm Table Indexing 0.001° Spindle taper CAT 40 Spindle speed 18,000 1/min Spindle motor 30/22 kW Mazgazin capacity 40 If you have any questions about the machine, as well as an appointment for a viewing, please contact us by phone or e-mail. Feel free to check out our other ads for a full overview of our stock.

Workpiece diameter: 500mm, workpiece height: 730mm, travel X/Y/Z: 630mm/765mm/600mm, A-axis: -120°/+30°, C-axis: +/-360°, max. table load: 500kg, spindle interface: HSK-A63, speed: 18000rpm, rapid traverse: 52m/min, feed rate: 52m/min, rotary table diameter: 610mm, tool positions: 30, control: Mazak Mazatrol Matrix. Documentation available. An on-site inspection is possible.

Number of tool positions: 30 Spindle power: 14 kW Spindle speed: 14,000 [rpm] A-axis travel: 360 [°] (+/-) Indexing accuracy: 0.001 [°] Stroke: -10 / +95 [°] Indexing accuracy: 0.001 [°] Tool Changer Type : Loader Arm Table load capacity : 350 [kg] Auction-ID: A7-32339-12

A high-performance planetary gear production line EMAG including automation and peripheral equipment is available. 1) Raw parts storage (stacker) EMAG. 2) Vertical single-spindle turning center EMAG VLC100, max. workpiece diameter: 100mm, max. workpiece height: 150mm, max. chuck diameter: 160mm, max. swing diameter: 210mm, travel X/Z: 650mm/375mm, speed: 6000rpm, rapid traverse X/Z: 60m/min/30m/min, tool stations: 12, tool holder: VDI30, control: Siemens 840D sl. 3) Vertical single-spindle turning center EMAG VLC100, max. workpiece diameter: 100mm, max. workpiece height: 150mm, max. chuck diameter: 160mm, max. swing diameter: 210mm, travel X/Z: 650mm/375mm, speed: 6000rpm, rapid traverse X/Z: 60m/min/30m/min, tool stations: 12, tool holder: VDI30, control: Siemens 840D sl. 4) Vertical hobbing machine EMAG VLC200H, max. workpiece diameter: 200mm, max. module: 4, travel X/Y/Z: 790mm/120mm/ ...

Double Pallet Control Unit: Siemens 840D Travels :X: 560 mmY: 510 mmZ: 560 mm B: 360° Spindle speed: 18.000 rpm Table size: 400 mm x 400 mm Tool changer: 60 position Chip conveyor, Tool measurement Unit,High pressure coolant unit Can be inspected under power

Key data: 1250 mm, 800 mm, 800 mm

Description Technical details x-travel 1250 mm y-travel 800 mm z-travel 800 mm Control HH 426-430 Speed range - infinitely variable from 0 to 12,000 rpm Table surface 1,500 x 1,050 mm Table load 2.50 t Number of T-slots 10 T-slots - spacing 100 mm T-slots 18H7 Tool holder SK40 DIN69871 Tool change 30 Tool - max. 420 mm Weight of the tools max. 10 kg Feed speeds from 20 to 10,000 mm/min Rapid traverse 24 m/min See pictures If it is electrified, it can be tested.

Vertical machining center MAS MCV 1016 QUICK

A machining center with 10-station tool changer is offered. Table clamping surface X/Y: 600mm/300mm, travel X/Y/Z: approx. 420mm/300mm/250mm, spindle speed: 6000rpm. Tool holder: BT30. Control: Brother CNC-400, machine weight: approx. 2000kg, including manual. Inspection possible by appointment.

GENERAL Project No.: 905808 Quantity: 1 pcs. Manufacturer: MATEC Type: 30-HV Control: Heidenhain iTNC 530 Year of Make: 2004 Condition: Used machine Approx (hrs): 54117 Program run approx. (hrs.): 14875 Approx. (hrs): 35997 DESCRIPTION MILL 4Axles Travel in X 2000 mm Travel in Y 600 mm Travel in Z 800 mm Tool holder SK 40 Max. speed milling spindle 12000 1/min Milling head automatically swivels 1 degree Chain tool magazine 48 stations Table size 2500x700 mm Interface 4th axis Clamping hydraulics OTHER EQUIPMENT Splash protection cladding with fully encapsulated working area Lighting in the work area Partition wall for pendulum machining Oil/Emulsion Mist Extraction System Hinge belt chip conveyor Internal coolant supply Coolant device with paper belt filter Machine condition light GENERAL TECHNICAL DATA Machine dimensions (LxWx ...

Key data: 1270 mm, 508 mm, 635 mm

Haas VF-4DHE CNC Vertical Machining Center CNC Control Haas CNC Table size 1,321 x 457 mm Table load 1,588 kg Number of pallets: 1 x X-axis travel 1,270 mm Y-axis travel 508 mm Travel Z-axis 635 mm Spindle holder MAS BT40 Spindle speed 40 - 8,100 1/min Spindle motor 22.4 kW Magazine capacity 24 + 1 If you have any questions about the machine, as well as an appointment for a viewing, please contact us by phone or e-mail. Feel free to check out our other ads for a full overview of our stock.

CNC Vertical Machining Center HERMLE C 50 U With track control Heidenhain iTNC 530 Year of Make: 2008 Travel : X 1000 Y 1100 Z 750 Speed range : 20 – 18,000 rpm continuously variable ( HSK 63) With the following accessories: NC swivel rotary table Ø 1150 mm x 900 mm Vertical tool changer with 60 magazine positions ( HSK 63 ) Blowing air through the centre of the spindle Blow-off device IKZ 80 bar with paper belt filter Scraper belt conveyor Coolant Setup Sealing air for scales, bed flushing Oil mist extraction Manual Cab Door , Automatic Cab Roof Electronic Heat Compensation iTNC 530 Electr. Manual control module HR 410 3 D Probe Heidenhain Various HSK 63 tool holders equipped with tools Rotating transparent window Swarf Spray Gun 4 Pieces Height Adjustable Machine Shoes Operating instructions

CNC Vertical Machining Center HERMLE C 30 U With track control Heidenhain iTNC 530 Year of Make: 2008 Travel distances : X 650 Y 600 Z 500 Speed range : 20 – 18,000 rpm infinitely variable ( HSK 63 ) With the following accessories: NC swivel rotary table Ø 630 mm Vertical tool changer with 32 magazine positions ( HSK 63 ) Linear Axis Standard Version Blowing air d.d. spindle center Blow-off device IKZ 40 bar , Paper belt filter for IKZ Scraper belt conveyor Manual Cab Door , Manual Cab Roof Polycarbonate Safety Lenses Electronic Heat Compensation iTNC 530 Electr. iTNC manual control module 3 D Probe Heidenhain Various HSK 63 tool holders equipped with tools Rotating transparent window Oil mist extraction Swarf Spray Gun 4 Pieces Height Adjustable Machine Shoes Operating instructions

CNC Vertical - Machining Center HERMLE C 1200 V With track control Heidenhain iTNC 530 Year of Make: 2009 Travel : X 1200 Y 900 Z 500 Speed range : 20 – 10,000 rpm infinitely variable ( HSK 63 ) With the following accessories: Rigid angle table 1260 mm x 800 mm clamping surface Vertical tool changer with 30 magazine positions ( HSK 63 ) IKZ 40 bar Blow-off device Scraper belt conveyor Rotating transparent window Coolant Setup Electronic Heat Compensation iTNC 530 Electr. Manual control module HR 410 3 D Probe Heidenhain Control cabinet cooling unit ( RITTAL) Oil mist extraction Various HSK 63 tool holders equipped with tools Spindle Oil Cooler Swarf Spray Gun 4 Pieces Height Adjustable Machine Shoes Operating Instructions

Manufacturer: Heller Model: MC 16.1 Year of Manufacture : 2004 /2005 Technical Specifications Spindle - Motor spindle speed: 16,000 rpm - Tool holder: HSK 63 Setup / Clamping Area - Hydraulic clamping for fixtures - Pneumatic workpiece support control Tool System - Tool magazine capacity: 40 tools - Drill breakage detection Working Area (Axis Travel) - X-axis travel: 630 mm - Y-axis travel: 630 mm - Z-axis travel: 630 mm Coolant System - Knoll coolant system - Maximum tool coolant pressure: 30 bar Hydraulic System - System pressure: 60 bar Find more here - / Contact us at -

Control: OSP-P 300S X-axis: 695 mm Y-axis with stroke: +150/ -150 = 300 mm Z-axis: 1,600 mm B-axis: 240°, positioning in 0.001° C-axis: 360°, positioning in 0.001° Turning diameter: 650 mm Turning length: 1,500 mm Mount: Capto C6 Total tool positions: 80 Accessories: NC Tailstock Movable hydraulic steady rest AX 5 on NC axis Coolant system with belt flow filter hydraulic 3-jaw chuck Kitagawa BB 212-11 automatic touchsetter High-pressure cooling IKZ High Cut Pro software option (High Accuracy Package with Super Nurbs) CAS Collision Prevention System Spindle orientation main spindle, electric Multi-tool including rotation function for Y-axis Helix function Automatic main power shutdown DNC-DT interface Machining Navi M-i (milling), speed control to minimize vibrations. One-Touch IGF Chip conveyor

The Mazak VTC 800 series is a line of powerful, large-format 5-axis turning centers for large workpieces, known for their high precision and rigidity, ideal for aerospace, energy and heavy machinery, with functions such as integrated spindles, fast tool change, and for efficient complete processing. Accessories/Options:, Tool magazine for 30 tools, Tool length measurement, tool breakage detection, Factory-installed preparation for chip conveyor (left), Magazine (HSK) for 155 tools, Air blower at the workpiece, Signal light (end of machining: yellow), Additional: Work area lighting, Coolant gun, Air blower through the spindle, 70 bar preparation, including interface for high-pressure system, Automatic opening/closing of the operator door, Mazak Monitoring System B RMP 60 (only/H/V), Collision monitoring by Brankamp, 2 Renishaw TS27R tool presetting devices, NC rotary table, Holding device ...

A CNC vertical long-bed machining center Mazak is available. Travel X/Y/Z: 3000mm/800mm/720mm, B-axis: 110°, C-axis: 360°, table diameter: 600mm, long-bed table dimensions X/Y: 3500mm/820mm, max. table load: 2500kg, spindle interface: BT40, speed: 18000rpm, rapid traverse: 50m/min, tool stations: 48, coolant pressure: 70bar. Machine dimensions X/Y/Z: approx. 5250mm/3650mm/3200mm, weight: approx. 16100kg, control: Mazatrol Matrix 2, spindle hours: 18502h. Including rotary table Nikken CNC 601MA, high-pressure coolant, center partition wall, Renishaw probe, touch probe RMP 60Q, CAD/CAM software Topsolid 7.18 and postprocessor. Documentation available. An on-site inspection is possible.

CHIRON FZ08 KS Magnum High Speed Plus (HSP) High-Speed Machining Center (HSP) TECHNICAL FEATURES: Year: 2006 NC Type: FANUC 18i-MB5 Number of axes: 7 X-axis travel: 450 [mm] Y-axis travel: 270 [mm] Z-axis travel: 310 [mm] X, Y and Z fast travel speed: 75000 [mm/min] Maximum diameter in bar turning spindle: 32 [mm] Maximum speed Turning spindle: 8000 [rpm] Maximum power turning spindle: 12 [kW] A-axis angular travel: 360 [°] A-axis indexing accuracy: 0.001 [°] B-axis angular travel: -20° / +115 [°] B-axis indexing accuracy: 0.001 [°] Pin Attachment: HSK40 Maximum speed Spindle: 30000 [rpm] Number of tool magazine stations: 40 Turning part by robot (6th side machining): Yes RS232 Port: Yes Installed power: 17 [kVA] Supply voltage: 400 [V] Operating hours: 9911 [h] Dimensions: 1500 x 2600 x 2300 [mm] Weight: 3400 [Kg] EQUIPMENT INCLUDED: x1 RENISHAW p ...

A defective vertical CNC machining center DMG Mori is available. Travel X/Y/Z: 835mm/510mm/510mm, tool stations: 20, tool holder: SK40, speed: 10000rpm, table dimensions X/Y: 1000mm/560mm, T-slot spacing: 100mm, max. table load: 800kg, table height: 720mm. Control: Heidenhain TNC 530, operating hours: approx. 29836h. Either the pneumatic release cylinder or the spindle is defective. Documentation available. On-site inspection is possible.

A universal machining center is offered with control: Heidenhain TNC 426. Operating hours: approx. 45380h, spindle hours: approx. 14384h. Viewing possible by appointment.

Manufacturer: Chiron Model: DZ 12K W Year of Manufacture: 2010 - High-speed CNC machining system by Chiron - Equipped with 4th axis and integrated rotary table for high productivity - Includes Knoll chip conveyor - Includes water treatment plant Find more here - / Contact us at -

The machine is in good technical condition, testing possible after prior agreement. 3 AXES, Heidenhain ITNC 530 control system.

Key data: 6195 mm, 2935 mm, 565 mm

TECHNICAL DATA: Working Range: X: 4600 mm Y: 2200 Maximum travel: X: 6195 mm Y: 2935 mm Z: 565 mm 5 axes Nesting table 01 Turret tool magazine with 18 slots 01 self-propelled tool changer 10 stops: stroke 150 mm 01 Vacuum pump: 250 m³ 01 Vacuum pump: 500 m³ 01 Laser Pointer Pen Drilling unit (6 kW): 18 spindles for vertical drilling (11+2 X-axis - 6 Y-axis) 02 Double-Sided Spindles for Horizontal Drilling – X-Axis 01 Double-Sided Spindles for Horizontal Drilling – Y-Axis 01 Saw blade unit – X-axis Electrospindle unit (13 kW): Equipped with HSK mount - liquid-cooled Software: CAMPUS V7 PLUS

Horizontal machining center Toyoda FH550S Year of manufacture: 09/2005 Control: Fanuc Description: X-axis: 750 mm Y-axis: 800 mm Z-axis: 850 mm Pallet: 550 x 500 mm Spindle power: 21.6 kW Spindle speed: 15,000 rpm Magazine: 60 tool positions chain magazine Coolant: Knoll high-pressure system Machine time: 83,000 hours Spindle/feed time: 20,000 hours Approx. space requirement: 3000x5700x2770mm Machine weight: 16,000 kg Horizontal machining center Find more here - / Contact us at -

Works well Machine is in Spain Standard configuration with cutting range 2500 × 1550 No. 1 Automatic CNC saw with milling unit and multi-spindle drill head, model MASTERCUT 2500 × 1550, with the following characteristics: Angle of rotation of the saw: ±90° Servo motors: Digital servo motors from YASKAWA Flywheels: Ø 800 mm made of cast iron Cleaning systems for the flywheels Saw Position Sensor Suction nozzle: Ø 150 mm Compressed air requirement: 6–7 bar Self-braking motor for the flywheels: 7.5 kW Automatic lubrication of all components Pneumatic Tensioning of Flywheels Maximum cutting length: 2500 mm Maximum cutting width: 1550 mm Maximum cutting height: 0–150 mm Minimum cutting radius (depending on the saw blade): 65 mm with 13 mm saw blade Dimensions of the saw blade: 5,450 × 13 × 0.6 mm or 5,450 × 16 × 0.8 mm  ...

Light horizontal machining center model H5000 with control Fanuc 310i more information on request. Machine available immediately.

CONTROLS   CNC controls MAZAK PC FUSION 640 M WORKING RANGE -CUBIC-   X-axis travel: 1700 mm   Y-axis travel: 1400 mm   Z-axis travel: 1400 mm TABLE   - positioning/indexing: 360000 ° SPINDLE / HEAD   spindle revolutions (max): 10000 /min   drive power: 37 kW TOOL MAGAZINE   number of positions: 120 AUTOMATIC WORKLOAD EQUIPMENT   store type: pallet changer   number of store positions: 6   pallet length: 1000 mm   pallet width: 1000 mm   number of pallets: 6 A high-quality Mazak FH 10800 is available for sale, equipped with a 6-fold pallet storage system, ideal for automated machining processes and high production output. The machine is in very good condition and is available immediately. With a large travel range, powerful spindle and extensive equip ...

Omv 5-Axis Milling Machine Famu ACTIVE Technical specifications Heidenhain CNC Model CNC Version Itnc 530 Tool holder HSK 63 Spindle power 30 Kw Spindle speed 22000 HSC (High Speed) Yes Number of tools 30 X-axis stroke 3000 mm Y-axis stroke 1800 mm Z-axis travel 850 mm Table dimensions 3100 X 1100 mm Roller guides Head type Automatic fourth and fifth axis head Additional technical notes for the B-axis head 360° / +-105° Head with Torque motors Gantry type Gantry with fixed upright moving table Belt chip conveyor Presetting yes Passage between posts 1320 mm Basic Information Brand Famu ACTIVE model Year of construction 2008 Part Number E9BACB Level Machine Standard Size and Weight Length 9700 mm Width 4500 mm Height 4800 mm Weight 27000 Kg

This 5-axis Romi DMC 620-5 was manufactured in 2016, featuring a Siemens 840D ShopMill control, 620/520/460 mm travels, and a spindle speed of 12,000 rpm. It includes a 30-position tool changer and a belt-type chip conveyor. With less than 10,000 operational hours in a single-shift, consider the opportunity to buy this Romi DMC 620-5 vertical machining centre. Contact us for more information about this machine.

CONTROLS   CNC controls OKUMA OSP-P300MA WORKING RANGE -CUBIC-   X-axis travel: 560 mm   Y-axis travel: 560 mm   Z-axis travel: 625 mm SPINDLE / HEAD   spindle revolutions (max): 15000 /min X/Z SLIDE   number of tool positions (total): 12   number of live positions: 12   - rotation speeds (max): 5000 /min   - drive power: 5.5 kW TOOL MAGAZINE   number of positions: 146 AUTOMATIC WORKLOAD EQUIPMENT   number of store positions: 2   Workpiece diameter max.: 600 mm   worpiece length max.: 900 mm   pallet length: 400 mm   pallet width: 400 mm   number of pallets: 2 ELECTRICAL SPECIFICATIONS   mains voltage: 400 V   mains frequency: 50 Hz ATTACHMENTS   chip conveyor: yes   coolant unit: yes  ...

A complete manufacturing cell with four horizontal machining centers Makino and a pallet storage and transport system is available. Makino A55: Travels X/Y/Z: 560mm/560mm/600mm, pallet dimensions X/Y: 400mm/400mm, max. table load: 500kg, max. workpiece diameter: 630mm, max. workpiece height: 1000mm, rapid traverse: 84m/min. Complete system dimensions: approx. 24000mm/8000mm, weight: approx. 8500kg. The images and videos show an identical system. The configuration of the offered and the illustrated cells is essentially identical. Documentation available. On-site inspection is possible.

x-travel: 400 mm y-travel: 450 mm z-travel: 350 mm Control: Heidenhein iTNC 530 : 68 fach tool adaptor: HSK 40E turning speeds: 30.000 U/min fixed table - dimensions: 300 x 400 mm mm workpiece weight: 200 kg pallet table size: 320 x 320 mm feed speeds autom. x/y/z: 40 m/min. spindle drive motor: 13 kW Number of working hours: 32369 h total power requirement: 16 kW weight of the machine ca.: 7.500 kg Machine still in the delivery factory: Condition: ready for operation: CE signed: Electric 380 Volt: Palett changer: 7-fach Cabin: Tool magazin places number: 68 High-speed 3-axis universal machining center with 7-station pallet changer. Operating hours: 44,899 hours. Load hours: 32,369 hours. Spindle time since replacement: 13,350 hours. Gantry-style machine with a solid monoblock polymer concrete construction, compact linear ball bearings, Heidenhain direct measuring system, hydraulic  ...

Axles X 160 to infinity  Y to max 1300 mm Z up to max 60 mm 6-fold tool changer

scm Busellato cnc machining center with console tables Cantilever center with front open beam Drilling unit with 19 tools for vertical and horizontal drilling and in the X direction of the sawing unit Rear and front stops on the consoles Safety system via bumper (without carpets and barriers) Linear tool changer with 11 places on the machine stand Linear tool changer with 14 places on the cantilever (boom) Processing field X Y Z 3115 x 1320 x 180 Throughput in Z 1880 mm JET ELITE P4/13 CE VERSION V 400/50 mobile control element with 7

WORKING AREA 3200 x 2100 mm, X and Z axis 200 mm SPEED X and Y AXIS 70 m/min, Z axis 20 m/min ISAC ITALIA CONTROL 21.5-INCH TFT COLOR SCREEN GRID-ENABLED CONTROL WITH ETHERNET AND USB CONNECTION - 9 kW ISO 30 COPDLE - 9-SPINDLE DRILLING UNIT - LAUNCH MANAGEMENT DRILL - 8-POSITION TOOL CHANGE - 2 vacuum pumps (250 m3/h) - 6 vacuum zones - Loading and lifting unit - Final cleaning unit for slabs - Conveyor belt unit for unloading workpieces - Alpha CAM CAD/CAM software - Alpha Software Cam xNesting - Security barriers to protect against unauthorized access

cnc machining center with consoles lard  Processing field X 4500 mm Y 1550 mm Z 490 mm Gantry bridge over linear guides and racks running in X and Y max axis speeds X + Y 100 m/min Z 20 m/min

The machine is in good technical condition, testing is possible by prior arrangement.

The machine is in good technical condition, after prior agreement it is possible to test it. Supported systems MAX4 with WinMax v8 Control language completely in Czech 3D simulation yes Programming type Dialog and NC TABLE Table dimensions 1,500 x 660 mm T-slots 6 x 18 mm Max. table load 1,350 Kg Distance between spindle face and table 150 - 760 mm TRAVELS X axis 1,270 mm Y axis 660 mm Z axis 610 mm A axis 360 SPINDLE Max. spindle speed 12,000 rpm Spindle power 18 kW Torque 237 Nm Spindle taper SK 40 TOOL MAGAZINE Number of tools 40 Max. tool diameter 75 / 125 mm Max. tool weight 7 kg FEED Rapid feed X/Y/Z 30 / 30 / 20 m/min Working feed X/Y/Z 15 m/min OTHER MACHINE DATA Dimensions W x D x H 3,250 x 2,220 x 2,950 mm Weight 9,400 Kg

The machine is in good technical condition, after prior agreement possible to test. 2 workstation machining center. Workstation 1: 3 axes. Workstation 2: 5 axes. Magazine: 22 tools. Heidenhein control system. Fully functional. type: DBZ X: 2 x 750 (+ 4/5 axis) Y: 500 Z: 600 Worktable 2 × (1000 × 500 mm), 3 T-slots Tool clamping SK 40 DIN 69871 A Renishaw probe adapter on both workstations

5 processing stations, Production width: 230 - 1250 mm, Production length: 500 - 2400 mm, Material thickness: 0.63 - 1.0 (1.5)mm, Material type: Steel 1203 bare, Mains voltage: 400 V 50 Hz, Power: 150 kW, hydraulic pressure: max. 150 bar, Air pressure: max. 10 bar. The control system was renewed by SIEMENS.

The machine is in good technical condition, testing possible after prior agreement. Haidenhain 530 system.

The machine is in good technical condition, after prior agreement it is possible to test it. 3 axis machining center, X-axis repaired, bearing replacement, Y-axis bearing replacement. New Y-axis measurement

General Manufacturer: Chiron Type: DZ 12 W Magnum high speed plus Control: Siemens 840D Year of Make: 2016 Travels: X 550 mm Y 400 mm Z 400 mm Rapid traverse X/Y/Z: 75 m/min Operating hours: 14,709 h Working spindle Speed: 20,000 rpm Torque: 29 Nm Power: 24 – 36 kW Tool holder: HSK 63A Double spindle spindle spacing: 250 mm Tool changing table Dimensions L/W: 660 x 950 mm Tool/movement Tool changer: 32-fold Dimensions and weight Weight: approx. 9,500 kg Condition Condition: Used Functional: Tested and fully functional Other equipment and accessories included: Spindle coolers IKZ high-pressure system with belt filter Knoll KF150/500 Chip conveyor Probes Renishaw Oil mist extraction Blum Laser Measurement