machining line used for sale

Code: 0231 Brand: BIESSE Model: SKIPPER 100 - CE Standard CNC working center for furniture, kitchens, custom furniture, panels and various - CE Standard - Year 2006 Technical data: 3-axis (x-y-z) CNC working center - swan neck machine Movable panel, fixed working head - panel horizontally Integral protection of the working head and with emergency front carpets Numerical control with biesseworks software Infeed table (with motorized belts) left N. 2 panel fixing clamps (for their introduction into the working area) Outfeed table (with motorized belts) right Useful (maximum) working area (x - y - z) mm 3000 x 1000 x 60 Dimensions (minimum) workpieces that can be machined (x - y - z) mm 90 x 70 x 8 Dimensions (maximum) workpieces that can be machined (x - y - z) mm 3000 x 1000 x 60 (for panels longer than mm 2000, the minimum thickness becomes mm 13) Total installed powe ...

This 3-axis HARTFORD HB 3150/S vertical machining centre was manufactured in 2005. It features a generous table size of 3000 x 1500 mm and impressive axes strokes of 3000 x 1500 x 920 mm. The machine has a maximum rotation speed of 3800 rpm and a forward speed of 10000 mm/min. If you are looking to get high-quality machining capabilities, consider the HARTFORD HB 3150/S machine we have for sale. Contact us for further details.

This 3-axis Johnford VMC-1600S was manufactured in 2014. It features a longitudinal travel of 1600 mm, cross travel of 1100 mm, and vertical travel of 800 mm. The machine has a robust table working surface of 1800 x 1000 mm and a maximum table load capacity of 4600 kg. If you are looking to get high-quality milling capabilities, consider the Johnford VMC-1600S vertical machining centre we have for sale. Contact us for further details.

Offered is a CNC horizontal milling machine. Working area X/Y/Z: 1000mm/800mm/850mm, pallet size: 630x630mm, table load: 1300kg, B-axis indexing: 0.001°, spindle speed: 6000rpm, spindle power: 30kW, spindle torque: 600Nm, tool holder: SK50, magazine positions: 120, spindle internal cooling pressure: 70bar, pump capacity LD: 150l/min at 3bar, pump capacity MD: 40l/min at 7bar, pump capacity HD: 32l/min at 70bar, cooling capacity cooling unit: 11.8kW, control: FANUC 31iMA. Equipped with additional pallets with threaded grid (24xM16 in 125mm grid), direct absolute scales, spindle internal cooling system, automatic scraper belt chip conveyor with 1000l dirty water fine filtration, recirculating chiller, washing shower, mist extraction system, touch probe. Weight: approx. 18500kg, overall dimensions X/Y/Z: approx. 6800mm/4200mm/3400mm. Inspection possible by arrangement.

This 5-axis Okuma MU 6300 V was manufactured in 2016. It features impressive X-axis travel of 925 mm, Y-axis travel of 1,050 mm, and Z-axis travel of 600 mm. The machine has a maximum load capacity of 600 kg and a C-axis table diameter of 630 mm. If you are looking to get high-quality machining capabilities, consider the Okuma MU 6300 V vertical machining centre we have for sale. Contact us for further details.

Offered is a CNC horizontal machining center. Working area X/Y/Z: 750mm/750mm/850mm, pallet size: 550mm/550mm (2-position changer), spindle speed: 15000rpm, tool holder: SK50, tool magazine: 60 positions (chain type), B-axis: 0.001°, max. loading weight: 800kg, rapid traverse: 60m/min, power-on hours: 64148h, feed time: 21867h, control: Fanuc 31i. Equipped with 2-position pallet changer, coolant filtration system (central system designed for up to 3 machines), cooling unit, oil mist extraction system, tool package (15x drill chucks, 8x collet chucks, 13x face clamping holders), linear measuring system X/Y/Z, weight: approx. 12500kg, overall dimensions X/Y/Z: approx. 5500mm/3500mm/3200mm. Inspection possible by arrangement.

This 4-axis HELLER MC 16 was manufactured in 1999. It features a maximum spindle speed of 8000 rpm and an automatic tool changer with 40 positions. The machine is equipped with twin pallets and offers an XYZ travel of 630 x 630 x 630 mm. If you are looking to get high-quality machining capabilities, consider the HELLER MC 16 horizontal machining centre we have for sale. Contact us for further details.

x-travel: 630 mm y-travel: 560 mm z-travel: 560 mm table surface area: 1000 x 600 mm spindle taper: HSK 63 A spindle turning speed - stepless: 18.000 U/min feeds x/y/z -stepless: 0 - 30.000 mm/min rapid traverse: 30 m/min no. of tools in magazin: 2 x 12 workpiece diameter at full load: 130 mm tool length - max.: 315 mm weight of tools max.: 8 kg internal coolant system feed: 40 bar control: HEIDENHAIN control: MillPlus iT table load capacity: max. 500 kg total power requirement: 52 kVA weight of the machine ca.: 6,5 t dimensions of machine L x W x H: 3,40 x 1,86 x 2,42 m Accessories: probe HEIDENHAIN, TS 640, electron. handwheel, mech. vice (jaw width 160 mm), chip conveyor, coolant with bandfilter The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

This 4-axis HELLER MCP 250 was manufactured in 2000. It features a maximum spindle speed of 6000 rpm and an automatic tool changer with 52 positions. The machine is equipped with twin pallets and offers an XYZ travel of 800 x 800 x 710 mm. If you are looking to get high-quality machining capabilities, consider the HELLER MCP 250 horizontal machining centre we have for sale. Contact us for further details.

max. workpiece length: 3.800 mm profile spindle: 1 Stück main drive: 15 kW Control: Maestro active windoor The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

This 4-axis AXA DBZ vertical machining centre was manufactured in 2010. It features an impressive X-axis travel of 2 x 750 mm for pendulum processing, Y-axis travel of 500 mm, and Z-axis travel of 600 mm. The machine includes a NC rotary table with hydraulic counter bearing and a plate-type tool changer. If you are looking to get high-quality machining capabilities, consider the AXA DBZ vertical machining centre we have for sale. Contact us for further details.

This 5-axis SPINNER U5-2520 was manufactured in 2016. It features an impressive X-axis travel of 2660 mm, Y-axis travel of 520 mm, and Z-axis travel of 460 mm. The machine is equipped with a spindle speed of 10,000 rpm and an automatic tool changer with 2x52 positions. If you are looking to get high-quality machining capabilities, consider the SPINNER U5-2520 vertical machining centre we have for sale. Contact us for further details.

This 5-axis DMG DMC80U DuoBlock was manufactured in 2011. It features a maximum workpiece diameter of 800 mm and a height of 600 mm, with a load capacity of 800 kg per pallet. The machine is equipped with a dual pallet system and a rapid traverse rate of 60 m/min. If you are looking to get high-quality machining capabilities, consider the DMG DMC80U DuoBlock universal machining centre we have for sale. Contact us for further details.

Offered is a vertical CNC machining center. Travels X/Y/Z: 560mm/410mm/510mm, spindle holder: SK40, spindle speed: 12000rpm, table size: 900mm x 410mm, max. table load: 500kg, tool positions: 30, max. tool weight: 8kg, max. tool length: 350mm, rapid traverse X/Y/Z: 36m/min, spindle motor: 18.5kW, operating hours: 66174h, control system: Mazatrol 640M. Equipped with 30-position tool changer, flood cooling, 1 set of manuals, 1 set of adjustment tools, adaptive feed control function, documentation available. Weight: approx. 5000kg, overall dimensions X/Y/Z: approx. 2600mm/2500mm/2850mm. Inspection possible by arrangement.

This 3-axis SCM Morbidelli UNIFLEX HP was manufactured in 2014. It features a working area of 3,000 mm in the X-axis and 1,300 mm in the Y-axis, with a maximum speed of 24,000 rpm. The machine is equipped with 2 milling spindles and a tool clamping system of HSK-F63. If you are looking to get high-quality CNC wood machining capabilities, consider the SCM Morbidelli UNIFLEX HP machine we have for sale. Contact us for further details.

Key data: 2500 mm, 1018 mm, 100 mm

CNC Machining Center SCM Type Z 25 PLUS R4R4 Year of manufacture 2005 In 2022 new control system KVARA6 4A AN +6A MECH- ESA-GV (for 9,000 EUROS) Working range X between stops 2500 mm Vertical bores Y 1018 mm Milling Y 1240 mm Plate throughput maximum 180 mm Maximum panel thickness Z = 100 mm Stroke Z axis 200 mm Central lubrication at the top and bottom Drilling unit with 15 vertical spindles 6 horizontal spindles, 4 in the X direction and 2 in the Y direction Spindle speed 4000 rpm. Motor power spindle rotation 2.2 kW Travel speed of the X-Y axes 42.4 m/min. Travel speed Z axis 11.5 m/min. Main spindle approx. 6.6 kW Maximum speed of the main spindle 24000 rpm. Front tool changer with 4 tool holders Rear tool changer with 4 tool holders Rectangular Vacuum Cups 16 Pieces Tool holder HSK 63 Compressed air 6/7 bar, compressed air consumption 150 l Vacuum pump  ...

This 3-axis KOVOSVIT MAS MCV 750 was manufactured in 2004. It features an X-axis travel of 750 mm, Y-axis travel of 500 mm, and Z-axis travel of 500 mm. The machine includes a table size of 1000 x 500 mm and a maximum spindle speed of 10,000 RPM. If you are looking to get high-quality machining capabilities, consider the KOVOSVIT MAS MCV 750 vertical machining centre we have for sale. Contact us for further details.

CNC-controlled vertical machining center AXA VSC-3-3000-M Year of Make: 1995 Control: Heidenhain TNC 407 Technical data: X-travel: 3000 mm Y-travel: 420 mm Z-travel: 480 mm Table size: approx. 3000 x 500 mm Spindle holder: SK40 Speed range: up to 6000 rpm 22-fold tool changer Coolant system Heavy-duty travelling column construction Special features: Additional angle/universal milling head 4-/5-axis machining possible Noc Eey U Hy Tjg S Rrgswg Flexible machining of complex workpieces Ideal for toolmaking, mechanical engineering and single part production Machine is in neat condition. Viewing under power possible by arrangement.

This 3-axis Chevalier QP2440-L was manufactured in 2013. It features an X-axis travel of 1020 mm, Y-axis travel of 610 mm, and Z-axis travel of 510 mm. The machine includes a robust table size of 1200 x 600 mm and a maximum table load of 800 kg. If you are looking to get high-quality machining capabilities, consider the Chevalier QP2440-L vertical machining centre we have for sale. Contact us for further details.

This 5-axis Mazak Variaxis 630-5X was manufactured in 2003. It features a maximum X-axis travel of 630 mm, Y-axis travel of 765 mm, and Z-axis travel of 510 mm. The machine is equipped with a tool magazine holding 120 positions and a spindle speed of 12,000 rpm. If you are looking to get high-quality machining capabilities, consider the Mazak Variaxis 630-5X vertical machining centre we have for sale. Contact us for further details.

Number of axes: 3, max. speed: 6000rpm, compressed air connection: 6-8bar, main motor power: 20HP, control system: Fanuc Series 18-M, weight: 12t, without documentation. An on-site inspection is possible.

This 3-axis TOS Olomouc FV30 CNC A was manufactured in 2015. It features a spindle speed range of 50-6000 rpm and a tool changer with 12 positions. The machine has a maximum workpiece weight capacity of 360 kg and working strokes of 760 mm in the X-axis, 380 mm in the Y-axis, and 152 mm in the Z-axis. If you are looking to get high-quality machining capabilities, consider the TOS Olomouc FV30 CNC A vertical machining centre we have for sale. Contact us for further details.

This 3-axis EMCO PC MILL 125 was manufactured in 2000. It features an X-axis travel of 185 mm, Y-axis travel of 125 mm, and Z-axis travel of 200 mm. The machine includes an automatic tool changer with 10 stations and a clamping area of 420 x 125 mm. If you are looking to get high-quality machining capabilities, consider the EMCO PC MILL 125 vertical machining centre we have for sale. Contact us for further details.

This 3-axis Hermle C800V was manufactured in 1996. It features a SK40 spindle, capable of reaching up to 15,000 RPM, and includes tool length measuring. Ideal for precise vertical machining tasks. Contact us for more information about this machine.

I am selling a vertical continuous CNC milling and drilling machine HOMAG Weeke Drillteq V-200 (formerly BHX 055), built in 2023. Configuration: 1 pc. milling unit with tool change 4-positions HSK63 13 + 4 + 2 pcs Drilling Spindles 1 pc grooved saw Feed back, which slices the elements back to operator or rear as the conveyor machine. Condition as good as new. With full documentation and CE Available the same.

CNC working center model BUSELLATO S-MASTER H150 second hand machine 3 axes working condition : very good CE mark : YES volt. 380/50 composition : 1. vertical router with automatic tools change 2. horizontal router 3. boring unit X / Y ( horinzontal and vertical ) 4. saw blade unit useful size (working range) mm. 3200 x 1350 working travel of the axes : X=4000 mm. Y=1430 mm. Z=265 mm. maximum panel thickness mm.120 maximum panel clearance mm.150 installed power 16 kW machine weight 4500 kg

This 5-axis DMG Sauer Ultrasonic 10 + PH 2 | 120 was manufactured in 2009. It features a main drive speed of 40,000 rpm and an output performance of 6 kW. The machine operates efficiently with a cooling system and has a protection type of IP 54. If you are looking to get high-quality ultrasonic machining capabilities, consider the DMG Sauer Ultrasonic 10 + PH 2 | 120 vertical machining centre we have for sale. Contact us for further details.

X-axis: 620mm, y-axis: 520mm, z-axis: 460mm, B-axis: -50° to +110°, C-axis smallest increment: 0.001°, distance from spindle nose to table surface B/C-axes: 140-600mm, B/C-axis rotary table diameter: 650mm, centering bore: Ø55H7x12, T-slots quantity/width/pitch: 5x18x100, max. workpiece dimensions: Ø520x330mm, max. table load (90°/horizontal): 200/300kg, max. spindle speed (standard) direct drive: 12,000/min, spindle bearing inner diameter: 70mm, rapid traverse X/Y/Z: 36m/min, working feed rate: 1-10m/min, rapid traverse B/C-axis: 25rpm, tool holder: MAS BT-40, number of tool positions: 40, max. tool length: 250mm, max. tool weight: 7kg, compressed air requirement: 0.6MPa / 500l/min, coolant tank capacity: 420l, connected load: 45kVA, control: Heidenhain iTNC 640 HSCI, length: 2325mm, width: 4210mm, height: 3108mm, weight: 9.5t, operating hours control on: 9,380h, machine on: 9,501 ...

This 5-axis DECKEL MAHO DMU 60T was manufactured in 2001. It features an X-axis travel of 630 mm, Y-axis travel of 560 mm, and Z-axis travel of 560 mm. The machine includes a table size of 1000 x 600 mm and a tool magazine with 2x12 positions. If you are looking to get high-quality machining capabilities, consider the DECKEL MAHO DMU 60T vertical machining centre we have for sale. Contact us for further details.

Mikron HSM 800 – High Speed Machining Center Year 2007 | Heidenhain iTNC 530 | 24,000 rpm | 3-pallet changer High-precision CNC machining center from Mikron / GF AgieCharmilles, designed for demanding HSC applications such as mold & die, graphite and electrode machining, as well as flexible production. Travels: X 800 mm / Y 600 mm / Z 500 mm with pallet size 800 x 600 mm. Equipped with a 3-pallet changer for efficient automated operation. The machine features a high-speed spindle up to 24,000 rpm with HSK-A63 interface and a 50-position tool magazine. Well equipped with high-pressure through-spindle coolant (18–70 bar) including band filter system, chip conveyor, minimum quantity lubrication, oil mist extraction, rotating viewing window and probing system (M&H). Additional features include APS (Advanced Process System) and ITC (Intelligent Thermal Control) for maximum proces ...

This 3-axis MAHO 1600S universal machining centre was manufactured in 1989. It has approximately 38,800 machine hours and was operational until 2025 without notable issues. The machine features a functional coolant system and comes with available manuals and documentation. If you are looking to get high-quality machining capabilities, consider the MAHO 1600S machine we have for sale. Contact us for further details.

MAKE CHIRON MODEL MILL 800 5 axis 5 axis machininng center (milling/turning from bar) Under power in our warehouse in Gussago BS Italy Mimu Machine tools CNC Fanuc 18iMBS (5 simoultaneous axis 1) X, Y, Z (mm) 800 – 500 - 550 Rapids (Highspeed) 60 m/min Swivelling head CNC controlled (B axis) +/- 100° Turning spindle Peiseler Milling spindle 12.000 giri / 140 Nm (v nota 2) Tools 65 Tool type HSK-A 63 DIN 69893 Tool-change time 1,5 sec (v nota 3) Table 1400x500 Max table load 1200 kgs 90fjsieew Coolant through spindle 70 bar (see note 4) CNC controlled clamping/rotating unit for 6th face machining (v. nota 5) Pressurised linear encoders Swarf conveyor Renishaw-ready Y.O.M. 2006 Weight 7500 kgs Turning package Max dia 65mm RPM: 15 / 4500 Max 42,5 KW / 90 Nm. Hydraulic clamping 800 Nm. Bar loader ILS-RBK- 10012 65 Diameters min/max 5/65 mm L= 600-1200 mm Highspeed (2) 60m/min. Spindle ...

This 3-axis Mazak NEXUS 410A vertical machining centre was manufactured in 2006. It features an X-axis travel of 560 mm, Y-axis travel of 410 mm, and Z-axis travel of 510 mm. The machine has a maximum spindle speed of 12,000 rpm and a tool capacity of 30 tools. If you are looking to get high-quality machining capabilities, consider the Mazak NEXUS 410A machine we have for sale. Contact us for further details.

X-axis: 1600mm, y-axis: 900mm, z-axis: 760mm, connected load: 38kVA, control: Ultimax, operating hours: approx. 50,000h, with CTS (coolant through spindle), Knoll AE 1058 coolant filtration and processing system. An on-site inspection is possible.

Max. profile length for 3 side machining: 7600mm, Y axis: 845mm, Z axis: 620mm, max. travel speed X axis: 63m/min, max. travel speed Y axis: 60m/min, max. travel speed Z axis: 60m/min, swivel range A axis: −90°, 0°, +90°, max. spindle speed: 24,000/min, spindle power: 11kW S1, machining direction: top/front/rear/left/right, positioning accuracy: 0.1mm/m, tool holder: HSK-63F, disc milling cutter diameter: 120mm, saw blade diameter: 180mm, software: eluCam, connected load: 30kVA, compressed air connection: 7bar, compressed air consumption: approx. 180l/min, length: 10,775mm, width: 3430mm, height: 2950mm, weight: 4.9t, operating hours reading: 1550h, standby: 6300h. Accessories: length measurement for profile bar, HSK-63F tool holder set, five chucks, eight collets, 2 layer length machining with second light barrier, camera system, additional stationary tool magazine for eight tools, ...

A Fehlmann CNC machining center that was used in the ceramics industry is available. Travel X/Y/Z: 700mm/420mm/610mm, speed: 20000rpm, tool holder: SK30, tool positions: 48, spindle power: 9kW, torque: 70Nm, table dimensions X/Y: 1260mm/490mm, weight: approx. 5200kg, control: Heidenhain TNC 430M. The C key has a fault on the ATS swivel apparatus regarding the amplitude. The ball screws of the X and Y axes were recently replaced. Without extraction system. Documentation available. An on-site inspection is possible.

A CNC vertical machining center Emco is available. Travel X/Y/Z: 420mm/330mm/400mm, table dimensions X/Y: 650mm/320mm, max. table load: 150kg, tool positions: 12, tool holder: SK40, speed: 4500rpm, rapid traverse: 12m/min. Machine dimensions X/Y/Z: approx. 2400mm/2300mm/2450mm, weight: approx. 2750kg, control: Emcotronic TM02. An on-site inspection is possible.

This 5-axis DMG Ultrasonic 10 was manufactured in 2010. It features a maximum spindle speed of 40,000 rpm and a travel of 220 x 200 x 280 mm. The machine is equipped with a Siemens 840D solutionline control and has a maximum table load of 10 kg. If you are looking to get high-quality machining capabilities, consider the DMG Ultrasonic 10 vertical machining centre we have for sale. Contact us for further details.

This 4-axis HELLER MCH 250 was manufactured in 2006. It features a maximum spindle speed of 6000 rpm and a robust tool capacity of 100 tools in the automatic tool changer. The machine is equipped with twin pallets, enhancing productivity and efficiency. If you are looking to get high-quality machining capabilities, consider the HELLER MCH 250 horizontal machining centre we have for sale. Contact us for further details.

This 4-axis HELLER MC 16 was manufactured in 1999. It features a maximum spindle speed of 8000 rpm and is equipped with a tool magazine that holds 40 tools. The machine also includes a twin pallet system for enhanced productivity. If you are looking to get high-quality machining capabilities, consider the HELLER MC 16 horizontal machining centre we have for sale. Contact us for further details.

This 3-axis HERMLE U 630 T was manufactured in 2001. It features an X-axis travel of 630 mm, Y-axis travel of 500 mm, and Z-axis travel of 500 mm. The machine includes a table size of 900 x 528 mm and a maximum table load of 400 kg. If you are looking to get high-quality machining capabilities, consider the HERMLE U 630 T vertical machining centre we have for sale. Contact us for further details.

This 3-axis WEMAS VZ 750 CENTURY was manufactured in 2001. It features an X-axis travel of 750 mm, Y-axis travel of 500 mm, and Z-axis travel of 500 mm. The machine includes a Heidenhain TNC 426 control unit, an electronic handwheel, and a tool changer. If you are looking to get high-quality machining capabilities, consider the WEMAS VZ 750 CENTURY vertical machining centre we have for sale. Contact us for further details.

This 3-axis MILLTRONICS RH 20 vertical machining centre was manufactured in 2014. It features a substantial table size of 1,372 mm x 508 mm and impressive X-axis travel of 1,016 mm. The machine is equipped with a 24-station automatic tool changer and a spindle speed of 10,000 RPM. If you are looking to get high-quality machining capabilities, consider the MILLTRONICS RH 20 machine we have for sale. Contact us for further details.

This 4-axis Mazak V515/40N was manufactured in 2006. It features a maximum workpiece dimension of 1,300 mm x 550 mm x 680 mm and a robust table size of 1,300 mm x 550 mm with a maximum table load of 1,500 kg. The machine offers a rapid traverse rate of 26 m/min in X/Y and 20 m/min in Z. If you are looking to get high-quality milling capabilities, consider the Mazak V515/40N vertical machining centre. Contact us for further details.

This 3-axis Okuma M460R-VE vertical machining centre was manufactured in 2013. It features a robust X-axis travel of 762 mm, Y-axis travel of 460 mm, and Z-axis travel of 460 mm. The machine is equipped with a powerful 15 kW spindle that can reach speeds of up to 15,000 rpm, along with a tool magazine capacity of 20. If you are looking to get high-quality machining capabilities, consider the Okuma M460R-VE machine we have for sale. Contact us for further details.

This 3-axis Mazak VCS 430A was manufactured in 2014. It features a maximum spindle speed of 12,000 rpm and a table size of 900 x 430 mm. The machine is equipped with a Mazatrol Smart CNC and has a tool capacity of 30 positions. If you are looking to get high-quality machining capabilities, consider the Mazak VCS 430A vertical machining centre we have for sale. Contact us for further details.

This 3-axis Okuma M560-V was manufactured in 2016. It features a generous X-axis travel of 1050 mm, Y-axis travel of 560 mm, and Z-axis travel of 460 mm. The machine is equipped with a powerful 22 kW spindle and a tool magazine that holds 32 tools. If you are looking to get high-quality machining capabilities, consider the Okuma M560-V vertical machining centre we have for sale. Contact us for further details.

vertical machining center, year 2010, CNC iTNC 530. Used machine. More info & price on IndustrialBuyer.

This 5-axis Hurco VMX 42SR was manufactured in 2012. It features an X/Y/Z travel of 1060 × 610 × 610 mm and a spindle power of 18 kW, providing robust performance for various machining tasks. The machine includes a tool magazine with 30 positions and a maximum load capacity of 1000 kg. If you are looking to get high-quality machining capabilities, consider the Hurco VMX 42SR vertical machining centre we have for sale. Contact us for further details.

vertical machining center, year 2007, CNC 0i-MC. Used machine. More info & price on IndustrialBuyer.