machining line used for sale

Complete can filling and closing line for liquids (nutrition) in 250 gram aluminium cans. Product: nutrition liquids. Formats: diameter 65 mm, height: 90 mm, filling weight 250 gram. 24x per box. Capacity: up to 500 / 420 cans per minute (30.000 / 25.000 per hour) for different parts of the line (with automatic palletiser) but the last year reduced to 325 cans per minute (19.500 per hour) because of manual palletising of the carton boxes on a pallet. Dismantling date: March / April 2026., Line exisiting out of:, 1. Preformed can de-palletiser machine, separate layer by layer from the pallet including lid sorting unit., Manufacturer: van Uitert B.V., Year: 1996, Machine number: D05-11399-01, Serial number: 1996.07.005, Installed power: 10 kW - 400 V - 50 Hz, Consumption of air: 3 Nm3/h, Weight: 2.500 kg, Capacity: up to 500 cans/min = 30.000 cans/h, Control panel with Danfoss VLT frequenc ...

On behalf of our client, we are requested to offer this Pasta filata cheese line for sale, due to increasing production at the current factory. The whole line is delivered and built up by Sulbana AG Switzerland in 2019 and it is out of production for ± 1 year. The pasta filata cheese line produce products like Mozzarella, Burrata, Kashkaval, Pizza Cheese etc. The capacity of the line is 200 to 800 kg per hour. The line is already dismantled and located in the warehouse of the dairy in Germany, where it can be inspected., The line exist out of the following components:, - Elevator for lifting normcar trolleys of 200 liter with basic ingredients including tipping unit to empty the trolleys inside the feeding bunker. Max load: 350 kg. Manufacturer: Frontmatec Hygiene GmbH, type: Hebe- Und Kippvorrichtung, model: 27000, serial number: P-10259, year: 2019, motor: 0,75 kW - 400 V - 50 Hz., -  ...

Luwa SMS GmbH LN-0200 - Vertical Thin Film Evaporator consist of a cylindrical, vertically-arranged body with heating jacket. A rotor inside the body is equipped with rows of pendulum blades along the full length of the dryer., Special thin-film evaporator designed for dairy service, discharge system, vapor pipe, condenser, and drives. It was in used as a pilot plant on a dairy service until early 2001 and afterwards converted to a 2 square metre cheese base processor with discharge system and ran till 2025 in a Casein plant in a dairy factory in New Zealand., The vertical thin film dryers operate as follows: The wet feed is spread by the pendulum blades in a thin layer onto the heated wall. During this process, the volatile components evaporate continuously out of the product layer at high evaporation rates. The pendulum blades are designed with a minimum gap to the heated wall to preve ...

Koch Membrane Systems (GEA Tuchenhagen computer designed) Ultra Filtration (UF) plant for continuous circulation / concentration / filtration and the production of double cream cheese (philadelphia style). Once the plant is running continuously with ratio control, no manual interventions are generally necessary for the production of the UF concentrate. However, for optimal production of consistent quality, strict adherence to various prerequisites is necessary, e.g. regarding cleaning., The Ultra Filtration line exist out:, - Level tank, 750 liter., - Product feed pump (P1), Tuchenhagen VPB 32 L, 5.000 ltr/h, 39 mWs, motor 3 kW - 2.900 rpm - 380 V - 50 Hz., - Permeate pump (P2), Tuchenhagen VPB 32 L, 5.000 ltr/h, 35 mWs, motor 3 kW - 2.900 rpm - 380 V - 50 Hz., - CIP pump (P3), Tuchenhagen VPD 51, 110.000 ltr/h, 8 mWs, motor 7,5 kW - 1.450 rpm - 380 V - 50 Hz., - Circulation pump stage 1 ...

Unused renovation kit for an Alfa Laval CPM Constant-Pressure Modulating Valve (CPMI-2) pneumatic regulating valve. Genuine Parts Service Kit CPMI - 2/XPMO - 2 Upper NBR, Lower EPDM/PTFE, part no. 9611920218., Type of Machine: Constant-Pressure Modulating Valve, Art. no.: 9611920218

Key data: 1550 mm, 3 mm, 120 1/min

Qty. 1 Second-hand rotary shear cut-to-length line – still in operation Mfc.: PACO E.N.G Built: 2010 Still in operation! Raw Material: CR, EGI, GI, STS, AL, COLOR COATING COILS Tensile Strength Max.: 60 kg/mm2 Strip Width: 300 ~ 1,550 mm Thickness: 0.2 ~ 3.0 mm Coil Weight: 20,000 kg Sheet Length No. 1 Piler: 300 - 2,500 mm No. 2 Piler: 300 ~ 2,500 mm Piling Weight No. 1 Piler: 5,000 kg No. 2 Piler: 5,000 kg Coil ID: ∅508 mm, ∅610 mm = RUBBER SLEEVE Coil OD: ∅800 mm ~ Max. ∅2,000 mm

Pastry line, Fabr. Rondo, Compactline conveyor belt width 640, total length 7,000 mmStainless steel version, mobile

B+S/Dividella/Mettler-Toledo Garvens/Pester labelling & packing line for ampoules and vials comprising Bausch + Ströbel ESA 1025 high output self-adhesive labeling machine suitable for ampoules and vials, object diameter up to 36 mm, object height up to 140 mm, output up to 30,000 labels per hour, includes Allen hot foil coder, machine net weight approx. 1140 kg, Dividella NeoTop 904 topload cartoner with partition for ampoules and vials, format range min. 60 x 45 x 17 mm (LxWxH), max. 150 x 150 x 32 mm (LxWxH), capacity up to 900 objects/min. and 90 packs/min., Robatech hot glue unit, RonTech booklet-feeder, GUK leaflet folder from stack, Mettler-Toledo Garvens XS 2 MV checkweigher, max. 600 g, d = 0,1 g, T = -540 g, Pester PEWO-pack 250 compact stretchwrapper for folding cartons, etc maximum film width 250 mm, maximum format range 180 x 400 x 200 mm, capacity up to 60 bundles per minu ...

Optima/alpha pack complete production and packaging line for ELISA test kits, comprising Optima ImmuCoat coating system for the manufacture of 96-well microtitre plates for ELISA tests, B&R machine control with touchscreen control panel. Operation and process steps: 1. Feeding and preparation: Microtiter plates are automatically removed from destackers and transferred to the transport system. 2. Deionisation: To eliminate static charges, the plates are deionised, which is crucial for uniform coating. 3. Coding: Each plate is assigned a unique serial number, which is recorded in the system control for quality control purposes. Keyence printer. 4. Coating: The system precisely dispenses the biological components (such as antibodies or proteins) into the wells of the 96-well plate. The system can coat up to 1.200 plates per hour. 5. Product selection: The system allows the use of up to 12 b ...

2019 GAI 1730S-HV-4292 TOP — Fully Automatic Filling, Capping & Labelling Line Complete, fully automatic bottle filling and labelling line by GAI (Italy), year of manufacture 2019. Designed for viscous liquids such as oils, syrups, sauces, and similar products. Stainless steel construction throughout. CE-certified with full safety guarding. The line consists of two main units: 1. Filling & Capping Monoblock — GAI 1730S-HV-4292 TOP 10-station high-performance vacuum filler specifically engineered for viscous fluids. Patented fill valve design seals both the product tube and gas tube during filling, preventing any air contact with the tank contents. Fill level is centrally regulated and manually adjustable from 30 to 90 mm below the bottle neck. Centering cones on each fill valve ensure precise bottle alignment. Central bottom-feed product supply allows complete and natural tank dr ...

The Mac Ewans Centrifugal pump is a pump for use in sanitary applications. Previous used in a Casein plant. Motor: 7,5 kW - 400 V - 50 Hz - 1.460 rpm - 14,3 A. Diameter of the impellor: 180 mm. Connections on the inlet: 3. Connections on the outlet: 2,5. Estimated capacity: ± 30.000 ltr/h., macewans.co.nz/, Type of Machine: Centrifugal pump, Stock Number: 1444, Diameter of the impellor: 180 mm, Motor: 7,5 kW - 400 V - 50 Hz - 1.460 rpm - 14,3 A, Estimated capacity: ± 30 m3/h

Used line for the production of Mazzoni toilet cubes with a capacity of 1000 kg/h. The line includes: – Mixtruder type SZ-1000 – Filtrocyclone – Extruder SX-B-250/HE – Extrusion head. – Slicer – Twin screw conveyor – Year of manufacture 2007.

Margarine pilot plant with 1x high pressure pump, 3x crystalizer scrap surface heat exchangers (SSHE), 1x pin worker (1 - 2 and 3 liter), 1x phase inverter, 1x cooling unit (R22) and control panel. Working product pressure of the pilot plant up to 80 bar (8000 kPa). Capacity up to 90 kg per hour., - High Pressure Pump, High Pressure Pump for pumping the margarine emulsion through the margarine pilot plant. Gerstenberg & Agger A/S, type Labo Pump 2-22-4 , serial number 12.211, year 1990, product pressure max 80 bar, temperature max 100 °C, capacity max 200 kg/h, motor 415 V - 50 Hz - 1,1 kW. Control panel with Siemens S7-200 PLC., - Scraped Surface Heat Exchanger 01, Cooler., Pilot G&A Perfector - SSHE Cooler Perfector 57 is designed for lenient cooling of medium viscosity, pumpable food like margarine. Gerstenberg & Agger A/S, type Perfector Lab 1x57, serial number 12910, year 1993, dut ...

Used bread roll line W&P, type: Rollprofi -In bakery condition- For cut rolls, smooth and round knitted, long rolled and double rolls. - 5 rows - 600 mm working width - Integrated dough divider and drum rounder, Multimatic - Pre-proofing time: 12 min - 6 min before long-distance taxiing station - 6 min between long roller and cutting station - Weight range:24-85 g - Output: max. 4,680 pcs. / h Visits and test runs are possible by arrangement.

Bread roll line KÖNIG, type: G2000 with Mini Rex Futura -In good used condition- Compact bread roll line - Mini Rex Futura head machine - Proofer G 2000, SA2-ST2 - Proofing time approx. 6 minutes at maximum output - With side discharge belt single-row - Condition: good, everything checked - Ready to use - Machine is still being cleaned - Head machine output: approx. 4,000 pcs./h - Capacity proofer: approx. 2,500 pcs./h The roll line is in good condition and is ready for immediate use. Viewing and test run are possible at any time by arrangement.

Complete dough line for the production of ciabatta, square bread and baguette Consisting of the higher-level production units: - Dough pre-portioner - Extruders - Dough sheet is formed - Flouring stations - Cutting roller for longitudinal cutting - Guillotine for cross-section - Dismissal - Length of the line: approx. 20 meters - Capacity: max. approx. 2,100 kg / h - Condition: Good, ready to use The facility has always received the service and is in good condition. Already dismantled and stored. Viewing is possible.

Preformed Bottle Filling, Capping, Labelling and Packing Line for 2-litre plastic containers (jugs/bottles) for fresh milk with screw cap closure. The line is equipped with integrated control systems and is suitable for hygienic operation., Scope of Supply:, 1. Filling and Capping Machine, - Integrated gravity filling and screw capping system., - Designed for CIP (Clean-in-Place) cleaning., - Fully enclosed construction with access doors., - Equipped with sterile air filtration system., - 32 filling valves and 10 capping heads., - Touchscreen operator control panel., - Cap feeding bunker with conveyor to capping unit., Manufacturer: Weightpack, Model: WFT 32.10.160, Serial Number: WL239, Year: 2008, Capacity: up to 7.000 containers per hour, 2. Leakage Testing Unit (Squeeze Tester), Designed to detect container leakage after filling., Manufacturer: Teledyne TapTone, Serial Number: E05-00 ...

A complete bottle washing and filling line is available. 1) Rotary rinsing machine Augenstein RI 1600/48/6, year of manufacture: 2006. 2) Filling machine Deckert Rudolf IFM 420-2, year of manufacture: 2003. 3) Bottle unscrambler Pace Packaging M-400 PR SSD, year of manufacture: 2004. 4) Bottle capping machine Alcoa 6208/360, year of manufacture: 2003. Including cap feeder Augenstein, year of manufacture: 2008. 5) Packaging and labeling line Sleever MSA 5120 LS4, year of manufacture: 2013, labels: shrink sleeve labels, steam consumption: 150kg/h. 6) Weighing and metal detector unit Mettler Toledo XS3, year of manufacture: 2008. Line capacity: 9000bottles/h, bottle volume: 150ml, filling volume: approx. 150cm³, max. bottle diameter: 48.9mm, bottle height: 115.5mm, filling medium density: 1335kg/m³. Documentation available. An on-site inspection is possible.

number of spindles: 4 bore capacity in steel (diameter): 25 mm bore stroke: 120 mm weight of the machine ca.: 0.85 t dimensions of the machine ca.: 1.55 x 0.65 x 2 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

A modular bucket filling and lidding system Wittmann Robot Systeme is available. Components: bucket stack feeding, bucket stack transfer unit, bucket singulation, rake and filling, stopper, lid feeding, lidding, lid inspection and rotation for the further conveying processes. Number of formats: 6, format distribution round/rectangular, round bucket diameter: 226mm, round bucket height: 194mm, min. rectangular bucket dimensions X/Y/Z: 195mm/299mm/170mm, max. rectangular bucket dimensions X/Y/Z: 302mm/415mm/220mm, bucket volume: 5l/6l/10l/11l/16l. Including the corresponding conveyor units and motors. Documentation available. An on-site inspection is possible.

Number of systems available: 2 Year of Construction: 2010 In operation until: January 2014 System Components and Manufacturers - Transport system: Güdel Company - Finish station: Technofinish / Emtec - Car wash / spray cleaning unit: MTM - Measuring station: Komeg (post-process measurement) - Automation and control: Roth GmbH Equipment Included - 2 complete finish systems (Finishanlage komplett) - 2 spray cleaning chambers SKR 12 (Spritzkammer Reinigungsanlage) - 2 post-process measuring stations for shaft components - 2 automation control cabinets - 2 palletising units EuroPal P64 - 2 portal handling systems ZP-2 with 6 carriages each - 2 camera inspection systems InSight 5100 - 2 BOGE compressed air centres CLDF 9-270 - 6 transport trolleys - 140 workpiece trays 400 x 600 x 35 mm - 2 KLT transport systems (left and right) - 26 servo motors Siemens 1FK7042 - Suction grippers, sin ...

Power: 3 x 400V, 50Hz, 0.4kW, Dimensions: 1800 x 650 x 1400 mm

Height=1.57 m, Overall length= 0.82 m, Overall width= 0.82 m, Net weight= 143 kg,

Material Name: Shaft sprocket RS160-2-43T - 6 lines x 2 Material Brand: Generic Model: RS160-2-43T Material Type: Duplex Sprocket Material Specification: C45 / SCM415 steel PLEASE CONTACT AARON : +6017-369 8203 LOCATION: F11AW5 (F49)

Pastry line Seewer Rondo SPF 602 Condition: used, functional Year of Make: 2000 Calibration head, built in 1996 Cutting station Sprayer Filling station Guillotine Incl. cutting tools

Overview This complete filling line for non-returnable PET bottles was manufactured 2004 by the german manufacturer KRONES. The line was running as a non returnable bottle filling line. The line is designed for high-capacity beverage production, handling up to 12,000 b/h and is in a good condition.    Technical Data Capacity: 12,000 bph (at 1,5L); 14,000 bph (at 0,5L)  Filling product: carbonated water and soft drinks with 15°C and 8,0 g/l CO2 Bottle Formats: 0,5L and 1,5L PET CSD Cap Formats: PCO 1810 Contiroll labelling station 2-3-340 for wrap-around label from a reel with hotmelt and 2 x cold glue labelling station 8-8-130 for paper label Packaging formats: shrink wrapping with/without carry handle (3x2) Pallet: 4 x ¼ Plastic pallet (600 x 400 mm); 2 x Half-size pallet (800 x 600 mm) on Euro pallet (1.200 x 800 mm)  Application: CSD Hygienic design condition: good technical con ...

Wood production line manufactured in 2023. This ISM ATM-01 is a custom-made automatic production line designed for the fully automated manufacturing of wooden garden screens from individual planks. It features automatic discharge and stacking of finished screens, tilting stacks for efficient processing, and is adjustable for five different screen types. If you are looking to get high-quality wood processing capabilities, consider the ISM ATM-01 machine we have for sale. Contact us for further details.

Used door panel production - consisting of: Double-End Profiler Brand: Kraft Technical Specifications - 2 scissor lift tables - 2 vacuum grippers - Feed roller conveyor with belt conveyor - New Siemens touch control system 13 roller conveyor sections Brand: Kraft Technical Specifications - Powered, approx. 3000 mm each Continuous Inlay Special inlay line Gantry loader Brand: Kraft Year of manufacture: 2023 Technical specifications - For separating, aligning, and placing HPL Glue applicator Brand: Bürkle Year of manufacture: 1990 Glue applicator Brand: Kuper Year of manufacture: 2018 Laying table Technical data - Work platform for glue tanks, including staircase - Lifting station - motor-driven - Includes PVC conveyor belt Continuous-feed platen press Brand: Bürkle Optima 1428/50 Year of manufacture: 2017 Technical data - Start of series production in 2023 - 2 x 4 levels w ...

Used painting line Bütfering / Belting/ Heesemann / Bürkle / Elmag / Cefla / Venjakob Painting line consisting of: Vacuum feeding system Technical specifications - 2-lane - Roller width: approx. 1000 mm Wide-belt sander Brand: Büftering Type: Classic 213EB Year of manufacture: 2000 Technical specifications - Working width: max. 1350 mm - Vacuum feed belt - Electronic sanding shoe Belt conveyor system Brand: Belting Year of manufacture: 2019 Technical specifications - Dimensions: 6100 x 1000 mm Dust extraction system Brand: Heesemann Type: EA2 Year of manufacture: 1990 Coating machine Brand: Bürkle Type: DAL1-1300 Year of manufacture: 1993 Continuous drying tunnel Brand: Bürkle Technical specifications - With UV lamp Coating machine Brand: Bürkle Type: DAL1-1300 Year of manufacture: 1993 UV drying tunnel Brand: Elmag Type: Ti166-35+2iVM1-65 Technical specifications - Eq ...

Used root vegetable washing and peeling line with a capacity of about 5 T/h The line includes: DRUM WASHER WITH ELECTRIC MOTOR. - TYPE LTJ-840 DL.3600,WIDTH 1100,H.1950, Manufacturer: GATINEAU FRANCE, Year: 1980 Flat conveyor SCREW POWER PEELER WITH MOTOR. ELECTR. - TYPE YAI1056 BE A6/1 DL.5200, Manufacturer: GATINEAU FRANCE Year: 1980 STEAM PEELER WITH MOTOR. ELECTR. - TYPE PVR-900L DL.3000,WIDTH 2000,HEIGHT 5750, Manufacturer: GATINEAN FRANCE Year: 1980 OUTPUT SCREW WITH PEELER WITH ELECTRIC MOTOR - TYPE YAI 1056 BEA4/1 DL.7500, Manufacturer: GATINEAU FRANCE Year: 1980 Brush wipes 2pcs Inspection Conveyor

Qty. 1 Second-hand slitting line - dismantled Mfc.: Guida Impianti SpA Built: TBA Strip width: 20 - 650 mm Thickness: 0.20 - 3 mm Coil for 9400 kg Entry coil up to 5 ton Worked for Aluminium, LAF and Stainless Steel

Qty. 1 Second-hand Hot Rolling Mill Line Manufacturer: NKMZ Built: 1972 Roll Force: 2300 T (Periphery roll speed)Mill Speed: 0-24-210 m/min. Slab Thickness: 300-350 mm Width: 740-1540 mm Length: 1100-3000 mm Slab Weight: 1-2.7 T Slab Temperature: 370 – 550 °C Rolled Thickness: 8-200 mm Width: 750-1550 mm Plate Length: 2000-8000 mm Coiled Thickness: 6 – 12 mm Coiled Width: 700-1550 mm Coil I.D./O.D.: 750/1400 mm Coiling Temperature: 300-350 °C Back-up Rolls Dia.: 1500 – 1400 mm Work Rolls Dia.: 800 – 760 mm Roll Barrel Length: 1800 mm

A Uhlmann blister packaging line in need of repair is available. 1) Uhlmann UPS 4 ETX blister machine, year of manufacture: 2008, design: modular balcony design, modules: 12, blister capacity: 10 tablets, blister format X/Y/Z: 100mm/39mm/5.7mm, packaging output: 220blisters/min, roll width forming/sealing: 256mm/246mm, feed: 102mm, max. forming film roll diameter: 800mm, max. lidding film roll diameter: 300mm, filling section length: 1360mm, theoretical output: 50cycles/min, film width range: 63mm-300mm, punching width range: 28mm-284mm, max. forming depth: 12mm, min. blister dimensions X/Y/Z: 30mm/3.5mm/60mm, max. blister dimensions X/Y/Z: 110mm/12mm/145mm, max. stack height: 85mm, max. blisters per stack: 10, weight: approx. 7000kg. 2) Uhlmann C 2155 cartoner, year of manufacture: 2008, cartoning output: 10-150cartons/min, max. stacking output: 400blisters/min, product carrier height:  ...

Weinig Hydromat 2000 planing line with in and outfeed system, Manufacture year 2008, Consisting of:, - Weinig automatic infeed system High Mech E1, - Weinig moulder Hydromat 2000, - 6 spindles: B-R-L-T-T-B, - feed speed max. 60 m/min, - straight and profile jointers, - Weinig automatic outfeed system High Mech A1

Automatic foil wrapping machine which can be used for packing products like margarine or butter into aluminium foil. The machine is in a good as condition with main control panel with Siemens S7-200 PLC and frequency converter and operation panel with Siemens TD200 Operator Interface. Previously used in a margarine factory. The machine is equiped with a rotating forming drum with 4x rectangular molding chambers. The format on the machine is 250 gram, 98 x 65 x ± 41 mm. SIG folding principle (folding flap on the side, for less foil usage). The margarine is feed with a direct connection with compensator and return line. The machine is equiped with a photocell on the paper infeed, to control the exact position of the print on the foil. The speed can be adjusted by a frequency converter between 30 - 120 packages per minute (depending on product, packaging material and surrounding conditions ...

Complete cake production line for sale with a finished product capacity of 600 kg/hr. The line includes: • DIOSNA V600B batter mixing system with REIMELT feed pump • COMAS depositing system • MEINKE TURBU 1101 continuous gas tunnel oven • TECNOPOOL FLEX-SPIRAL cooling tunnel • COMAS filling, coating and decoration systems • ILAPAK DELTA 3000 packaging line • LOMA metal detection systems • Additional conveyors, syrup preparation and cake arrangement systems Main manufacturers: DIOSNA, REIMELT, COMAS, MEINKE TURBU, TECNOPOOL, ILAPAK, LOMA Year of manufacture: 2002 / 2003 Condition: Very Good Sold AS IS / WHERE IS. Inspection available by prior appointment. Price upon request.

Decoiler Coil weight: 2 x 2 ton Material width: 380 - 500 mm Coil exterior diameter: 1.300 - 1.400 mm Expansion range: 445 -530 mm Leveller / Straightener Material width : 40 - 500 mm Number of levelling rolls: 7 pcs. Diameter of the levelling rolls: 60 mm Number of pinch rolls: 2 pcs. Diameter of the drawing rolls: 60 mm Number of pull out rolls: 2 pcs. Diameter of the pull out rolls: 60 mm Material thickness: 0,4 - 1,6 mm Cross section: 800 sq mm Feeding speed: 0 - 30 m / min Required power: 3 kW

A complete Stürtz window production line is available. 1) Stürtz STBAZ-IPT-4000-V bar processing system for frames, sashes and mullions, year of manufacture: 2004. 2) Stürtz SE HSM-25/26-Compact-Plus four-head welding machine for sashes, year of manufacture: 2006. 3) Stürtz 4MC Motion Control CNC cleaning machine for the sash line, year of manufacture: 2011. 4) Stürtz WST-25-CNC turning station at the sash cleaner (3), year of manufacture: 2011. 5) Stürtz SE-HSM-40/26-Compact-Plus horizontal four-head welding machine for frames, year of manufacture: 2006. 6) Stürtz 2MC Motion Control CNC cleaning machine in the frame line, year of manufacture: 2008. 7) Stürtz WST-30 turning station in the frame line, year of manufacture: 2008. 8) Stürtz SE-BHT-3000 brush lifting table as a stop and transport table before the sash stop, year of manufacture: 2008. 9) Stürtz FBS-1 sash hardware sc ...

WACO resaw line BKW-Twin, With Jonab de-stacking, infeed and outfeed

wire diameter 2,4-4 mm spring diameter 42-55 mm output - pieces/min ca. 32 m

Overview The filling line was manufactured in 2021 by the German company ALWID. The filling line is new and can fill  chemical products into plastic containers. With the exception of the bottle feeder and Posimat, glass bottles can also be processed. Due to ATEX certification, explosive products can be processed with the line.  Technical details Capacity: 9000 containers/h (varies according to bottle volume and product).  Container  Max. Diameter: 100mm  Max. Height: 300mm  Control Siemens S7 Single machines  Bottle Hopper | ALWID | POSIMAT-ACCESS-N15  Bottle feeder with hopper 2000 l, in stainless steel, chassis and supports in mild steel painted Positronic control system for optimal adaptation to downstream filler Machine, completely internally wired with attached control cabinet in mild steel, painted Machine according to CE guidelines; i.e. max. noise level of ≤ 80 dB +/- 2 ...

Wood production line manufactured in 2020. This HYMMEN JUPITER JPT C 680/548 mit OFS 850 features a maximum printing width of 548 mm, with a system speed ranging from 8 to 65 m/min. It is designed for high-speed surface finishing of large panels, ideal for the flooring and furniture industries. If you are looking to get high-quality printing capabilities, consider the HYMMEN JUPITER JPT C 680/548 mit OFS 850 machine we have for sale. Contact us for further details.

A complete turning line for the production of drive shafts, consisting of a Lang-Laru cut-off and centering machine, three EMAG lathes with robot automation, conveyor peripheral equipment and measuring station, is available. 1) End machining machine Lang-Laru DHZ 03/1250-RR-S, year of manufacture: 2010, tool stations: 2x12, loading: Kuka robot/EWAB conveyor, machine dimensions X/Y/Z: approx. 8600mm/3000mm/4100mm, weight: approx. 15000kg, control: Siemens Sinumerik 840D. 2) 3x vertical shaft turning centers EMAG VTC 250, year of manufacture: 2010, loading: Kuka robot/EWAB conveyor, max. turning length: 630mm, max. swing diameter over bed: 140mm, max. workpiece weight: 20kg, spindle bore: 52mm, speed: 5000rpm, tool stations: 2, tool holder: VDI40, machine dimensions X/Y/Z: approx. 8100mm/3300mm/4300mm, weight: approx. 14000kg, control: Siemens. This is a complete turning line with peripher ...

Qty. 1 Second-hand Aluminium Slitting Line Manufacturer: Stamco Inc., USA Year of Manufacturing: 1981 Strip Width: 1828 mm (72”) Trim 1981 mm (78”) Untrim Thickness: 0.2 mm to 1.27 mm (0.003” to 0.050”) Line Speed: 304 m/min - 609 m/min Thread Speed: 15 m/min Input/Output Coil Weight – 10 T Input Coil OD: 2400 mm (96”) Input Coil ID: 508 mm (20”) Capacity: 8 cuts of 1.27 mm and 10 cuts of 0.9144 at line speed 304 m/min 13 uts of 0.6 mm and 21 cuts of 0.25 mm at line speed 609 m/min

Inv. Num. : 9122 Type: Unospray 1300 Producer: Cefla Created: 2007 Parameters: Vacuum belt width: 1300 mm Weight: 6200 kg Machine length: 4000 mm Machine width: 3600 mm Machine height: 3000 mm Includes: 1x cooling tunnel 2x Drying Tunnel

Pitch: 32 mm Motor output: 1,8 kW Clamping height max.: mm Overall size: mm Weight: 240 kg Number of boring spindles: 21 St. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Line is consisting of:, Weber slicer, Type: CCS904, Serial number: 7096, Year of construction: 2007, Capacity: 2000 RPM, Slice thickness: 0.5 - 50 mm, Compressed air: 10 Bar, 150 L/min., Power: 3 x 400V, 50Hz, 10 kW, Dimensions: 13400 x 1900 x 2600 mm, Including CCW904 weigher, CCR904 rocker, CCA speedloader and CCU portioning unit, Pago labeler, Type: System 516, Serial number: 212516068, Year of construction: 2012, Mettler Toledo metaldetector and checkweigher, Type: XS3, Serial number: 35000430, Year of construction: 2008, With reject, Bosch Sigpack Systems robot / cartoning line, Type: LDM + TTLi, Serial number: J-01659-LDM-042 / J-01659-TTLi-077, Viewtech optical control, Type: VT2007/010, Serial number: VT2007-DCDCL/057, With reject

With top hold down belt, circulation pump, electric hoists, Belt width: 900 mm, Cooking length: 8000 mm, Power: 3 x 380V, 50Hz, 0.43kW, Dimensions: 9000 x 1800 x 3850 mm, Weight: 5200 kg

Overview  This fully automatic packaging system for jars was built by Buhmann pac solutions System GmbH in 2016 and has been used very little, with only approx. 5,000 operating hours (of which approx. 2,000 hours were in pure production operation). The line includes a carton erector (wrap-around trays) and a packing unit and, in addition to packaging single-type cartons, also offers the option of automatically mixing offline products (mixed cartons). The system was regularly maintained by Buhmann & Yaskawa, with around €200,000 invested in maintenance and servicing between 2020 and 2024. The system is in very good condition and is available immediately. Technical details  Performance Product infeed online: max. 280 jars/min Format 3: max. 220 jars/min Mix type A: max. 140 jars/min (11.5 cartons/min) Mix type B: max. 140 jars/min (11.5 cartons/min) Total output: max. 350 jars/min or 3 ...

Material Name: Gearbox pulley 4 SPB 180mm - 6 lines x 2 Material Brand: Generic Model: 4SPB 180 Material Type: V-belt pulley Material Specification: Cast Iron PLEASE CONTACT AARON : +6017-369 8203 LOCATION: F11AW5 (F49)