machining line used for sale

Unused Alfa Laval ThinkTop V50 is a valve-top control unit that provides surveillance and control of valves during the fluid handling process. The control unit has been developed with user friendliness and robustness in mind. The V50 series is the compact option with a feature set tailored to valves that require only one solenoid valve such as butterfly and single seat valves. Solenoid valves 1 x 3/2. Digital 24 VDC. Article number: 9615400403., Type of Machine: Valve-top control unit, Art. no.: 9615400403

Indirect heated Thermisation unit previously used for the production of Creme fraiche 30% and mesophiles product 10%, but it can be used for all acidified + stabilized products. Skid mounted unit existing out of: Tubular Heat Exchangers (GEA Finnah A 544), level tank (200 liter), water pumps (4x Grundfos), flowmeter, valves for product and utilities, interconnecting piping, high pressure product pump (APV Gaulin, type Z4P-0,5BF serienr 96L34959, year 1996, capacity up to 4.000 liter per hour, motor 5,5 kW - 955 rpm - 400 V - 50 Hz) and the control panel with Siemens S5 PLC and Siemens Simatic OP37 operation panel. Current temperature program: creme fraiche: 35 - 51 - 71 - 40 - 29 °C or mesophiles: 25 - 55 - 75 - 40 - 23 - 10 °C. Maximum temperature possible: 85°C.Capacit y of the unit: currently set on 2.500 liter per hour but a ...

Serviced Continuous Butter Making Machine - CBM with a new control panel with simple controls. Output of 800 kg butter per hour sweet butter and 600 kg butter per hour cultured butter. Input of ± 1.600 liter of cultured or / and sweet cream per hour (35/42% fat, pH of ± 4,8 and infeed temperature ± 8 - 13 °C). Complete electric driven. Churning motor: 15 kW. Screw conveyor (kneading) motor: 5 kW. Vacuum pump: 1,5 kW. New control panel with simple controls with cream inlet temperature indictator, wash water inlet temperature indicator, output temperature indicator, emergency stop, main switch and all on/off buttons for the pumps., Type of Machine: Continuous Butter Making Machine (CBM), Capacity: 600 - 800 kg butter per hour (output), Motors: Churning: 15 kW and Kneading: 5 kW - 415 V - 50 Hz, Year of Major Service: 2024, Operating Hours: 0 h since major service, Dimensions: 3,55 x 1, ...

Tetra Pak Tetra Spiraflo Tubular Heat Exchanger (THE) previously used in a dairy for whey protein as pre-heater with indirect hotwater preparation (15 - 70 °C), holding section (1 - 3 minutes) and cooling section (65 - 10 °C)., Unit exist out of:, - 7x tubes for pre-heating (Tetra Pak MT-38/1x20s-6, total surface area: 2,25 m2, product connection DN25, hotwater connection DN20 with indirect hot water system with plate heat exchangers, pumps (CH18-10 A-W-G-BQQV - 7,5 m3/h - 0,72 kW), steam valves (Samson), expansion vats, manual valves and interconnecting piping., - 9x tubes for cooling (Tetra Pak MT-70/4x16s-6s-1, jacket: 20 bar - 110°C - 16 liter, inside: 50 bar - 110 °C - 3,6 liter, total surface area: 10,17 m2, product connection DN38, (ice)water connection DN50)., - Flowmeter (Endress+Hauser - Promag 300)., - Holding tube, DN 40 (6x 6 meter), complete with bracket and swivel bend ...

The Alfa Laval MR-200 Sanitary Self Priming Liquid-ring Pump is a pump specially designed for food, chemical, pharmaceutical and other industries where acid-resistant steel is resistant to the products to be pumped. All products wetted parts, i.e. pump casing, casing cover and impeller are made of acid-resistant steel AlSl 316. Clamp screws and legs are made of stainless steel AlSl 304. lntermediate part is in cast iron which is zinc coated and laquered making it highly corrosion resistant. Motor: 7,5 kW - 380/420 V - 50 Hz - 1.450 rpm - 15,3 A. Impeller diameter: 199 mm. Connections on the inlet / outlet: SMS 76 mm (3). Current maximum capacity (based on the available Alfa Laval performance curves and the current motor): 48.000 ltr/h @ 0 Bar., Type of Machine: Sanitary Self Priming Liquid-ring Pump, Stock Number: 1511, Diameter of the impellor: 199 mm, Motor: 7,5 kW - 380/420 V - 50 Hz  ...

Unused Alfa Laval ThinkTop V50 is a valve-top control unit that provides surveillance and control of valves during the fluid handling process. The control unit has been developed with user friendliness and robustness in mind. The V50 series is the compact option with a feature set tailored to valves that require only one solenoid valve such as butterfly and single seat valves. Solenoid valves 1 x 3/2. Digital 24 VDC. Article number: 9615400403., Type of Machine: Valve-top control unit, Art. no.: 9615400403

Unused Alfa Laval LKB Butterfly Valve which is a reliable, hygienic in-line valve for routing low and medium-viscosity liquids in stainless steel pipe systems due to its substantial opening area and low flow resistance. This hygienic valve is designed for on-off duties with low to medium-viscosity liquids in hygienic applications across the dairy, food, beverage, brewery and many other industries. Article number: 9612628569. EPDM 316L KIT ACT LKLA-T Ø85 NC 6 MM. This LKB valve is with a pneumatic actuator for pneumatic operation (item code: 9612194003, AIR-ACTUATOR LKLA-T-85 NC 76,1 MM/DN 65-80)., Type of Machine: Butterfly Valve, Art. no.: 9612628569, Pneumatic Actuator: Yes

Unused Alfa Laval LKB Butterfly Valve which is a reliable, hygienic in-line valve for routing low and medium-viscosity liquids in stainless steel pipe systems due to its substantial opening area and low flow resistance. This hygienic valve is designed for on-off duties with low to medium-viscosity liquids in hygienic applications across the dairy, food, beverage, brewery and many other industries. Article number: 9612628569. EPDM 316L KIT ACT LKLA-T Ø85 NC 6 MM. This LKB valve is with a pneumatic actuator for pneumatic operation (item code: 9612194003, AIR-ACTUATOR LKLA-T-85 NC 76,1 MM/DN 65-80)., Type of Machine: Butterfly Valve, Art. no.: 9612628569, Pneumatic Actuator: Yes

Unused Alfa Laval ThinkTop V70 is a valve-top control unit that provides surveillance and control of valves during the fluid handling process. The control unit has been developed with user friendliness and robustness in mind. The V70 series is the more flexible option compare to the V50, that can be configured to meet the needs of the most demanding valve applications such as Mixproof valves. Solenoid valves 3 x 3/2. Digital 24 VDC. Article number: 9615400012., Type of Machine: Valve-top control unit, Art. no.: 9615400012

Roller / roller for pastry lineProduct description:Manufacturer: RheonType: 818Condition: used, not testedOuter dimensions: 95 x approx. 100 x 33 cm (WxDxH)Details see pictures

Pastry line rollers Fritsch For Fritsch system Dimensions approx. 75x23cm Height 27 cm Bakery condition Details see picture

This MAQUINARIA LDM VPS 2103 was manufactured in 2020. An industrial automated system for wood production, it features a hydraulic nailing system, chain-driven pallet transport, and servo motors for precise block positioning. It operates on 220V or 380V and handles pallet widths from 800 mm to 1500 mm. Safety certified under EN 12100 standards. Contact us for more information about this machine.

Croissant roll pastry line Fritsch For Fritsch plant Croissant cutter Dimensions approx. 75x23cm Height 27 cm Baker condition Details see picture

Used KHS bottle filling line with crown capper - overhauled by HORMES - Filling rotary - Bottle cap bunker - Feeding of the crown caps by magnetic tapes - Conveyor belts The plant has been completely overhauled by HORMES and is currently out of operation. Viewing possible. We will be happy to send you further information on request.

Used a fully functional and complete production line for bottling still and sparkling mineral water. The line filled 1,5 liter bottles. The capacity is 13500 bottles / h. The line consists of the following equipment: 1. SAMETO EBH 2050 101321ST PREFORM TILTER 2010 2. SIDEL SBO10 BLOW MOLDING MACHINE 2011 3. ALSIM AIR CONVEYOR 1999 4. ALSIM ASMOJET FILLER/RINSE/CAPPER 1999 5. ALSIM MAS-MIX 30/PC MIXER WITH CARBONATOR 1999 6. ALSIM BOTTLE CONVEYOR FOR FILLED BOTTLES 1999 7. ACI BOTTLE DRYER 15kW 2015 8. KRONES CONTIROLL K745G19 LABELING MACHINE 2004 9. ACMI FENIX C9332 SHRINK TUNNEL 2019 10. ALSIM PACKS CONVEYOR 1999 11. SMIPACK HA35-50-70 HANDLING MACHINE 2002 12. ALSIM VALIANT 1I 1P PALLETIZER 1999 13. OBS ROTOMATIC STANDARD PALLET WRAPPER #1 2009 14. OBS ROTOMATIC STANDARD PALLET WRAPPER #2 2009

Used line for the production of yellow cheese from Obram. Capacity 10,000 kg/day.

Belt width 1,500 mm. Strip thickness 0.5 -3.0 mm, coil weight 7 to. Longitudinal cuts 4 pcs., straightening rollers 7 pcs., coil inside dia. 508 mm, coil outside diam. 1,600 mm Facility consists of: Decoiler Pallet truck Pressing arm Overflow table Straightener Longitudinal shears Cross shears Scrap Wrapper Side table

Linear drive, linear gear, lifting gear, spindle drive, rodless pneumatic cylinder -Manufacturer: Hoerbiger ORIGA, rodless pneumatic cylinder -Type: EU/4200-040-01000- -Stroke: 1000 mm -Drive: pneumatic -Price: per piece -Number: 2 piece -Dimensions: 1300/70/H100 mm -Weight. 7.7 kg/piece

Universal milling head, milling adapter, milling extension, angle milling head, electronic spindle, linear bearing, linear rail, linear guide, roller guide rail, guide carriage, guide rail, servo motor, electric motor, DC motor -Spare part comes: from a machining center BJM type ALBZ-145 -Travel: 2430 mm -Servo motor: manufacturer Beckhof type AM3074-0Q40-0000 -Max. Speed: 2500 rpm -Power: 7.35 kW -Torque motor: 48.8 Nm -Number: 2x rails available -Price: complete -Dimensions piece: 3740/200/H405 mm -Transport dimensions: 3740/400/H405 mm -Weight complete: 444 kg

Sliding support, linear drive, clamping plate, unit carrier, milled surface, welding table, welding table -Spare part of: a Wotan table boring machine -compatible with: clamping plate ID 21339 -Width at the top: 80 mm -Width at the bottom: 270 mm -Length: 2200 mm -Height: 215 mm -Number: 2x available -Price: complete for both -Transport dimensions: 2200/600 / H300 mm -Weight: 556 kg

Two-spindle drilling machine, row drilling machine, drilling machine, floor drilling machine, column drilling machine, column drilling machine -spindle taper: MK2 -Motor: 1.2/0.85 kW -Table size: 1175 x 355 mm -Projection: 255 mm -Speeds: 125 - 1400 rpm -Spindle stroke: 125 mm -Dimensions: 1345/960/H1900 mm -Weight: 1212 kg

Frequency converter, frequency converter, drive converter, controller, variable speed drive -Siemens: Sinamics Active Line Module 6SL3130-7TE23-6AA3 -Max. Power: 36 kW -Input 3 AC 380-480 V 50/60 Hz -Output DC 600 V 60 A 36 kW -Siemens: Sinamics Double Motor Module 6SL3120-2TE21-0AA3 -Input: DC 600 V -Output: 3 AC 400 V 9 A/9 A -Dimensions: 200/490/H270 mm -Weight: 16 kg

Frequency converter, frequency transformer, drive converter, controller, variable speed drive -Siemens Sinamics Active Line Module 6SL3130-7TE21-6AA3 -Max. power: 16 kW -Input: 3 AC3 80-480 V 50/60 Hz -Output: DC 600 V 27 A 16 kW -2x converters available Price: per piece -Dimensions: 500/100/H270 mm -Weight: 7 kg

Frequency converter, frequency inverter, drive converter, controller, variable speed drive -Siemens Sinamics Active Line Module 6SL3130-7TE23-6AA3 -max: Power: 36 kW -Input: 3AC380-480V 50/60Hz -Output: DC 600V 60A 36KW -Quantity: 6 pieces available -Price: per piece -Dimensions: 500/150/270 mm -Weight: 10.7 kg

Linear drive, linear gear, lifting gear, spindle drive, linear axis -Manufacturer: Festo, linear drive type DGE-25-500-SP -Stroke length: 500 mm -Servo motor: Festo type EMMS-AS-55-S-TM -Number: 5x linear drive available -Price per piece -Dimensions: 765/65/H150 mm -Weight: 5 kg/pc.

Power cable, solar cable, fiber optic cable, fiber optic line, data cable, LAN cable, fiber optic cable, data line, video cable -Manufacturer: Lapp Kabel, data line on cable drum -Type: UNITRONIC Li2YCY PiMF 5x2x0.5 ROHS -Cable drum: schill IT 380.RM -Cable length: 97 m -Number: 7x cable drums available -Price per piece -Dimension: 410/260/H450 mm -Weight: 21 kg/pc.

Cross table controlled, cross table NC, coordinate table, LM Guide Actuator, linear drive, coordinate table, precision table linear guide, CNC cross table -Cross table: with linear drives THK LM Guide Actuator KR -Travel: x= 310 mm / y= 500 mm / z= 125 mm -Spindle pitch: 10 mm -Individual components: see photos -Dimensions: 750/550/H445 mm -Weight: 35 kg

PLC control, electronic module, interference filter, power supply line filter, ballast, line filter, power line filter, three-phase filter, three-phase line filter, filter module, line interference filter -Manufacturer: Sew Block, line filter interference filter -Type: NF 063-503 HLD 110-500/55 -Voltage: 3x 500/520V 50 - 60Hz -Dimensions: 250/85/H95 mm -Weight: 2.8 kg

Linear drive, linear gearbox, lifting gearbox, spindle drive, linear axis, toothed belt axis -Manufacturer: Festo, Linear actuator type DGE-25-1500-ZR-LK-RH-KF-GK -Stroke length: 1500 mm -Servo motor: Festo type EMMS-AS-55-M-LS-TM -Planetary gearbox: Neugart PLE 80 -Quantity: 5 pieces available Price: per piece -Dimensions: 1880/70/H340 mm -Weight: 12.7 kg/pc.

Linear drive, linear gear, lifting gear, spindle drive, linear axis, toothed belt axis -Manufacturer: Festo, linear drive type DGE-40-1600-ZR-RF-LH-RK-GK -Stroke length: 1600 mm -Servo motor: Festo type EMMS-AS-70--S-RM -Planetary gear: Neugart PLE 80 -Number: 4x linear drive available -Price: per piece -Dimensions: 2240/130/H410mm -Weight: 24.5 kg/piece

Linear bearing, linear rail, linear guide, roller guide rail, guide carriage, guide rail, linear guide rail -Guide rail: Linear guide rail, 2 pieces -Rail length: 1450 mm -Rail width: 20 mm -Dimensions: in the pictures -Delivery/Price: complete -Transport dimensions: 1450/40/H18 mm -Weight: 7.3 kg

Linear drive, linear gear, lifting gear, spindle drive, linear axis, linear rail, linear guide, roller guide rail, guide carriage, guide rail, rail guide for tool dispensing systems -Manufacturer: igus, linear drive type DryLin T from Achterberg Toolbase AK -Actuator: DLG 060-068.03 -Threaded rod: Ø 12 x 980 mm -Number: 8x linear drive available -Price: per piece -Dimensions: 1615/110/H120 mm -Weight: 5.5 kg/piece

Linear drive, linear gear, lifting gear, spindle drive, linear axis, linear rail, linear guide, roller guide rail, guide carriage, guide rail, rail guide -Linear drive: stroke length 620 mm from Achterberg Toolbase AK -Actuator: DLG 060-068.01 -Threaded rod: Ø 12 x 615 mm -Number: 8x linear drive available -Price: per piece -Dimensions: 745/80/H80 mm -Weight: 1,7 kg/piece

Frequency converter, frequency inverter, drive converter, controller, variable speed drive, single motor module, double motor module, active line module -Manufacturer: Siemens, Sinamics Active Line Module from vertical lathe Scherer VDZ 80 DS -Type: 6SL3130-7TE23-6AA1 -Input: 3AC 380-480V - 50/60Hz -Output: DC 600V 60A 36kW -Dimensions: 500/150/H270 mm -Weight: 10.6 kg

linear drive, linear gear, lifting gear, spindle drive, linear axis, linear rail, linear guide, electric spindle drive -Manufacturer: Geze, spindle drive type E250/24V-DC EV 1 Ovp -Ident.-No.: 16 473 -Stroke length: 300 mm -Network: 24 V DC -Shaft: Ø 20 mm -Number: 2x linear drive available -Price: per piece -Dimensions box: 670/60/H45 mm -Weight: 1.8 kg/piece

Line chokes, line filters, frequency converters, drive inverters, line filters, Smart Line Modules, Basic Line Filters -Manufacturer: Siemens, Line choke Line Filter Sinamics for 36kW -Type: 36KW SLM/ALM / 40 KW BLM -Voltage: 3AC 380-480V, 50-60Hz, 74A -Number: 4x Line Filter available -Price: per piece -Dimensions: 415/75/H225 mm -Weight: 7 kg/piece

Linear drive, linear gearbox, lifting gearbox, spindle drive, pneumatic drive, slide, guide, electromechanical linear axis, mini slide, mini slide -Manufacturer: Festo: Mini slide type DGST-16-125- -Stroke: 125 mm -Shafts: Ø 6 mm -Number: 2 sleds available -Price: per piece -Dimensions: 210/85/H40 mm -Weight: 1.4 kg/pc.

Linear drive, linear gearbox, lifting gearbox, spindle drive, pneumatic drive, slide, guide, electromechanical linear axis, mini slide, mini slide -Manufacturer: Festo: Mini slide type DGSL-12-50-Y3A 543979 -Stroke: 50 mm -Number: 15 sleds available -Price: per piece -Dimensions: 185/60/H45 mm -Weight: 0.9 kg/pc.

Manufacturer: Bürkle, Type: RCLS 700, Year: 2014, Finished product: Betonplatten, Work piece width min-max mm: 700, Min.-max. workpiece height in mm: 3 - 80, Min.-max. workpiece length in mm: 400, Feeding speed min-max m/min: 2 - 10, Control: Bürkle, Inlet conveyor: no, IR-Trockner 1: 20 x 3 kW, Transport 1: Band/Stange, Lackwalze 3: RCLS 700, UV Trockner Lampen/Watt: 120, UV Trockner Lampen/Watt: 120, Paint rollers overall: 2, UV Trockner gesamt: 2, IR-Trocker gesamt: 1, UV Trockner gesamt: 2, UV dryer: Easy Cure UV 700, Conveyor belts: 0, FREE TEXT: einschl. Dosierwalzenheizung, Year :2014

Manufacturer: Schäfer Folienkaschiermaschiermaschine, Type: SIK 1250/R,, Year: 1999, Work piece width min-max mm: 1300, Min.-max. workpiece length in mm: endlos, Min.-max. workpiece height in mm: 3-40, Working widht max mm: 1300, Working width min min mm: 100, Working widht mm: 1300, Working hight mm: 880, Feeding speed min-max m/min: 3-20, Roller diameter mm: 120, Lamination calender: yes, Diameter of lamination calender in mm: 120, Roller diameter mm: 120, at top and bottom: gummiert, pre-coated foil: yes, Main engine kW: 0,37 , FREE TEXT: inkl. Einlaurollgang und Auslaufrollgang 2 mal 3000 mm, Year :1999

Manufacturer: HOMAG Maschinenstrasse, Type: Kf 62, Year: 1992, Work piece width min-max mm: Maschine 1 1200 mm Maschine 2 2600 mm, Min.-max. workpiece length in mm: 250-2600, Min.-max. workpiece height in mm: 10-50, Edge band thickness min/max mm: 0,5-3,0, Soft edge single side: no, MA 1 min - max working width: 250-1200, MA 1 chipper: yes, MA 1 fine milling: yes, MA 1 grooving: no, MA 1 glueing part Soft: no, MA 1 rough milling: yes, MA 1 radius milling 1: yes, MA 1 grooving: no, Min - max working width MA 2: 250-2600, MA 2 min - max edge material thickness mm: 0,5-3,0, MA 2 edge thickness 0.5-3 mm: yes, MA 2 chipper: yes, MA 2 fine milling: yes, MA 2 glueing part straight: yes, MA 2 trimming: yes, MA 2 Andruckzone : yes, Coil magazine: 2-fach, Feeding: no, Angular transfer: yes, Feeding speed max m/min: 10-50, Compressed air bar: 6, Premilling: yes, Flush/radius/chamfer milling: yes 2  ...

Manufacturer: Giardina , Type: Wasser UV Spritzstrasse, Year: 2005, Maschinensteuerung übergeordnet: yes, Work piece width min-max mm: 900, Work piece hight min-max mm: 10-100, Work piece length min-max mm: 4500, Feeding speed m/min: 2-6, UV track: yes, Wasserlackstrasse + UV: yes, Inlet conveyor: 2500, Dedusters: yes, Spraying machine: Dualtech 301, 2 Lackkreise: yes, Belt conveyor: yes, Einlaufrollgang: yes, Angular transfer: yes, Microwellentrocknung: yes, Jet drier mm: yes, Heating medium hot water: yes, Outlet roller conveyor mm: yes, UV Trockner Lampen: 2 von oben 1 von unten, Wattleistung: 120, Adjustable: yes, Outlet transport mm: 4500, Jet drier: 1, Inlet conveyor: 2500, Spraying heads - total: 4, work piece detection: yes, Conveyour system: Rolle-Band, Spraying stations: 2, Fast exchange system spray gun carrier: yes, Laquer system - airmix: yes, Laquer recharging: yes, by rol ...

Decoiler Decoiler with arm: 1,5 ton Material width: 350 mm Coil exterior diameter: 1.200 mm Expansion range: 370 - 430 mm Speed: 0 - 20 m / min Leveller / Straightener Material width : 250 mm Number of levelling rolls: 9 pcs. Diameter of the levelling rolls: 30 mm Material thickness: 0,5 - 6 mm Cross section: 1.200 mm Feeding speed: 20 m / min Required power: 18 kW

Manufacturer: Homag, Type: KFR 21 und KFL 21 inkl.Winkelübergabe, Year: 1999, Control: 2 X NC 21, Program: Homatic, System comprising of: 2 Kantenmaschine mit Winklelübergabe, Kantenmaschine mit Doppelenprofiler Teil: 2 Zerspaner + Fügen, getrennte Kette: yes, Laserverleimteil: no, Kantenstärke min-max mm: 0,5-3, Work piece width min-max mm: 45, Min.-max. workpiece length in mm: 150, Min.-max. workpiece height in mm: 10-45, Strips min/max mm: no, Machine no 1: KFR 21, MA 1 Arbeitsbreite min-max: 250-2800 mm, MA 1 Kantenmaterialstärke min-max mm: 0,5-3,0, Ma 1 Fügefräsen: yes, Ma 1 Schutzfräsen: yes, MA 1 Feinfräsen: yes, MA 1 Nuten: yes, MA 1 Verleimteil gerade: yes, MA 1 Vorfräsen: yes, MA 1 Radiusfräsen 1: yes, MA 1 Radiusziehklinge: yes, MA 1 Flachziehklinge: yes, MA 1 Schwabbeln: yes, MA 1 Nuten: yes, Angular transfer: yes, Machine 2: KFL, MA 2 Kantenstärke 0,5-3 mm: yes, ...

Manufacturer: Cefla, Type: Easy 2000, Year: 2006, Work piece width min-max mm: 10-1300, Work piece hight min-max mm: 10-60, Work piece length min-max mm: 100-3000, Overall length metre: ca.25, Feeding speed m/min: 3-5, Water-based paint line: yes, Inlet conveyor: yes, wast cleaning: yes, work piece detection: yes, Conveyour system: Band, Spraying stations: 2, Fast exchange system spray gun carrier: yes, Laquer circles: 4, Laquer system - airless: yes, Laquer system - airmix: yes, Laquer recharging: yes, by rollers: yes, by scraper: yes, Water cleaning: yes, Circulating-air drier mm length in mm: ca.12000, machine ready for demonstration: yes, FREE TEXT: inkl 2 Lampen UV 120 Watt Trockner/12 Kremlin Pumpen /Pistolenwaschgerät und walzmaschine Sorbini Smartcoater, Year :2006

Longitudinal cut-to-length line for the sheet metal industry 1,500 x 1.5 mm Belt width 1,500 mm Band thickness 0.4 -1.5 mm Longitudinal sections 3 Coil weight 3,000 kg# Speed 15 m/min. 3 unwinders Machine very well maintained, immediately ready for use, ex site

The linear axes have been in storage for two years and are still in unused new condition. New price currently is 1820 € net per piece. We also have linear axes from Festo : 14x Festo ELGA-TB-RF-70-320-0H-S-P0 23x Festo ELGA-TB-G-70-320-0H-P0 If you are interested, please contact us.

in operation for frozen and fresh fish,, Sorted part with 12 pushers, Power: 120 revolutions / min.,, Size of the sorting stations: approx. 400/300/250 mm (LxWxH), weighing unit: consisting of feed, weighing belt and discharge: 300/400/300 x 200 mm, with 12 ejectors installed in series (stainless steel - pneumatic cylinder FESTO).

Bandwidth Infeed conveyor Calibration head incl. flour Humidification station Cutting frame for 2 tools Guillotine incl. various folding shoes, cutting rollers and filling device incl. 2 screw rollers -dismantled bakery condition/not tested or cleaned - Cutting the band

Used line for packaging tablets and capsules in PET packaging Line composition: 1. DT PACKAGING SYSTEM UNSCRAMBLER1000S rotary sorter 2. DT PACKAGING SYSTEM CONVEYOR CONTROL conveyor for counters 3. DT PACKAGING SYSTEM CONVEYOR CONTROL conveyor for counters 4. B8P/3DUPLEX counter 5. B8P/3DUPLEX counter 6. Elevator 7. ML657 cap setter 8. Desiccant hopper 9. Cap hopper 10. PACK SERVICE PREALIMENTATORE lid elevator 11. PACK SERVICE TAVOLO ROTANTE PS160 buffer sorting wheel 12. PACK SERVICE TAVOLO ROTANTE PS160 buffer sorting wheel 13. Neri labeler SL200 14. Marchesini MA155 cartoning machine 15. Type C Transporter