machining centre used for sale

This 3-axis Tekna TK 427/8 CNC milling machine was manufactured in 2000. It features a substantial travel range with 8000 mm on the X-axis, 500 mm on the Y-axis, and 220 mm on the Z-axis, weighing 3500KG. If you are looking to get high-quality milling capabilities, consider the Tekna TK 427/8 machine we have for sale. Contact us for more information about this machine.

for spare parts. Machine is out of service. Processor card removed

This Enshu ES450 was manufactured in 2004. It features a spindle speed of up to 12,000 min⁻¹, a tool storage capacity of 20, and a rapid traverse feed rate of 60,000 mm/min. The machine accommodates a maximum workpiece weight of 800 kg and offers a cutting feed rate of up to 15,000 mm/min. Consider the opportunity to buy this Enshu ES450 vertical machining centre. Contact us for more information.

This 5-axis Quaser MV 204 IIU/10 vertical machining centre was manufactured in 2002. It features a tilting spindle head with a range of ±110°, a spindle speed of 10,000 rpm, and a spindle motor power of 15/33 kW. The machine includes a 32-position ATC, chip conveyor, and internal coolant at 20 bar. Consider the opportunity to buy this Quaser MV 204 IIU/10 vertical machining centre. Contact us for more information about this machine.

This 3-axis DOOSAN DNM 500 was manufactured in 2011. It features a robust table size of 1200 × 540 mm and axis travels of 1020 × 540 × 510 mm. Equipped with through-spindle cooling and preparation for a 4th axis, it offers enhanced machining capabilities. Consider the opportunity to buy this DOOSAN DNM 500 vertical machining centre. Contact us for more information.

This 3-axis MTcut V110T was manufactured in 2008. A robust vertical machining center featuring a 10000 rpm spindle and extensive travels of X: 1100 mm, Y: 610 mm, and Z: 610 mm. It includes a digital 3D probe and a magnetic plate, enhancing its versatility. Ideal for those looking to buy this MTcut V110T vertical machining center. Contact us for further details regarding this vertical machining center.

This 3-axis KOVOSVIT MAS MCV 750 Speed was manufactured in 2009. It features a table clamping surface of 1000 x 640 mm, a maximum table load of 650 kg, and a spindle speed up to 12000/min. The machine includes a 24-position tool magazine and has dimensions of 3700×2220×2735 mm. If you are looking to get high-quality milling capabilities, consider the KOVOSVIT MAS MCV 750 Speed machine we have for sale. Contact us for more information.

This 4-axis HELLER H2000 horizontal machining center was manufactured in 2017. It features a Siemens 840D Solution Line control, rapid traverse of 60,000 mm/min, and a spindle speed of 10,000 rpm. The machine can handle workpieces up to 720 mm in diameter and 850 mm in height, with a maximum table load of 600 kg. Consider the opportunity to buy this HELLER H2000 horizontal machining center. Contact us for more information about this machine.

This 3-axis Mazak VC PRIMOS 400S was manufactured in 2016. This vertical machining center features a table size of 1500 x 670mm, a maximum load capacity of 1300kg, and a spindle speed of 20,000rpm. It includes a tool magazine with 20 places and 2 pallets. Ideal for precision machining, buy this Mazak VC PRIMOS 400S vertical machining center. Contact us for further details regarding this vertical machining center.

This 5-axis SPINNER U-1520 was manufactured in 2012. It features a Heidenhain iTNC630 control, a 3D measuring probe, and both internal and air cooling systems. The machine includes an 89-position tool changer with travels of X=1520mm, Y=700mm, and Z=600mm. If you are looking to get high-quality milling capabilities, consider the SPINNER U-1520 machine we have for sale. Contact us for more information.

This Stama MC 535 Vertical Machining center was manufactured in the year 2001 in Germany. It is equipped with 4 t-slots and operates with 3-axis. The max. workpiece weight is 3000 kg and the max. spindle speed 8000 rpm. The machine is in top condition and fully operational with currently 18,485 operating hours. It will be sold because of replacement with a new and larger one. For the moment it is not connected but upon agreement, on-site testing is possible.

This 5-Axis YASDA H-30i horizontal machining center was manufactured in 2001. It features a 650mm X-axis, 560mm Y-axis, and 560mm Z-axis with a spindle speed range of 120-12,000 RPM and a BT 40 Big Plus spindle. Equipped with a 60-position automatic tool changer and cooling through the spindle, this machine is controlled by a Fanuc 16iM system. Buy this YASDA H-30i horizontal machining center for precise and efficient milling operations. Reach out for further details.

This 5-axis DMG DECKEL MAHO DMC 125U was manufactured in 2002. A universal machining centre, it offers advanced capabilities for diverse and complex machining tasks. Consider the opportunity to buy this DMG DECKEL MAHO DMC 125U universal machining centre. Contact us for more information.

This 3-axis Kitamura 3XiF was manufactured in 2005. It features a robust FANUC 16i-MB control system, a spindle speed of 10,000 rpm, and a BT-40 taper. The machine includes a chip conveyor with an extended neck and a 30-tool changer. Table size is 900 x 410 mm, supporting up to 200 kg. Ideal for precision machining with internal spindle cooling available. Contact us for more information about this machine.

This 3-axis HAAS DM-2 vertical machining center was manufactured in 2016. It features extensive use with 39,293 power-on hours, 11,081 cycle start hours, and 6,377 feed cutting hours. The machine offers a travel range of 711 mm on the X-axis, 406 mm on the Y-axis, and 394 mm on the Z-axis. Consider the opportunity to buy this HAAS DM-2 vertical machining center. Contact us for more information.

Manufacturer QUASER Model MV204IIU / 10 Year 12/2002 CNC HEIDENHAIN ITNC530 3 work tables / pallets Table 1 Size Ø280 mm. Table 2 Size Ø 500 mm. Table 3 Size 600×400 mm. Weight allowed on table 265 kg Min-max distance on table 150-760 mm. Axles Travels (X/Y/Z) 700/590/480 mm Tilting head movement range (A-axis) ±110º Axis Positioning A 0.001º Table Rotation (C-Axis) 360º C-Axis Positioning 0.001º Fast Forward Axles (X/Y/Z) 32,000 mm/min Maximum Working Advance (X/Y/Z) 15,000 mm./min. Head Head Speed 10,000 r.p.m. BT-40 Head Cone Main engine power 15/33 kW Par 192/189 Nm. Charger Tools No. of Positions in Tool Loader 32 RANDOM tool change system Maximum tool length 280 mm. Maximum tool weight 7 kg Other Equipment Chip Evacuator INCLUDED Internal cooling 20 bar INCLUDED Coolant tank capacity 280 l. Refrigeration electrical cabinet INCLUDED Clea ...

This 4-axis AKIRA Performa HV 8A was manufactured in 2022, a Vertical Machining Centre with 15000 rpm spindle and robust 10500 kg build. Includes A-axis with counter bearing for stable 4th-axis work. Consider the opportunity to buy this AKIRA Performa HV 8A Vertical Machining Centre. Contact us for more information.

This 3-axis Zayer KF 4000 was manufactured in 1989. It features a large table of 4,000 × 1,000 mm, capable of handling loads up to 10,000 kg. Equipped with a spindle speed of up to 3,000 rpm and a power range of 30–37 kW, it ensures robust machining capabilities. Consider the opportunity to buy this Zayer KF 4000 universal machining centre. Contact us for more information about this machine.

Finn-Power C5-25 - Sheet metal processing center / nibbler Siemens Sinumerik 840 D CNC control Extensive accessory package with approx. 400 tools Various spare parts included in the scope of delivery incl. enclosure of the system the machine is still in operation approx. 12000 operating hours Year of manufacture 2005 Technical data Capacity: - Max. sheet size (X x Y): 2530 x 1270 mm - Min. sheet size (X x Y): 300 x 100 mm - Max. sheet thickness: 8 mm - Max. sheet weight: 200 kg - X-axis length: 2584 mm (X-42... X2542) - Max. travel speed X-axis: 90 m/min - Y-axis length: 1317 mm (Y-25... Y1292) - Max. travel speed Y-axis: 60 m/min Lifting speeds: - High Light: 3000 rpm - Max. stroke rate (1 mm inseam length): 1100 rpm - Hole to hole (25 mm inseam length): 420 rpm - Distance (250 mm stride length): 150 rpm Punching: - Punching force: 300 kN - Punching stroke ...

This 5-axis Hyundai Wia HI-MOLD 750-5A vertical machining centre was manufactured in 2014. It features a spindle speed of 20,000 RPM, a tool magazine with 30 slots, and a rapid traverse rate of 50 m/min in all axes. The table can handle up to 500 kg, tilting from +30˚ to -120˚. Consider the opportunity to buy this Hyundai Wia HI-MOLD 750-5A vertical machining centre. Contact us for more information about this machine.

This 5-axis EMAG BAW 06-22 double-spindle machining center in 5-axis design (on both sides) was manufactured in 2006. It features double spindle machining, a 600 mm spindle distance, and X/Y/Z travels of 600/975/500 mm. The machine includes a high-speed milling spindle at 17,500 rpm, dual 72-unit tool magazines, and a robust HSK A63 tool holder. Additional features include a KNOLL coolant system, 70 bar high-pressure pump, and a chip conveyor. If you are looking to get high-quality milling capabilities consider the EMAG BAW 06-22 machine we have for sale. Contact us for more information.

This 5-axis HAAS UMC-750 was manufactured in 2019, featuring a robust universal machining center with a 500 mm table diameter and a maximum table load of 300 kg. It includes a high-speed spindle up to 12,000 rpm, ISO 40 taper, and a 40-position tool changer. Ideal for complex geometries and diverse machining tasks. Contact us for more information about this machine.

This 3-axis DMG DECKEL MAHO DMC 635V was manufactured in 2007. Its a vertical machining centre equipped with a measuring probe and a 3D button, ideal for precise machining tasks. If you are looking to get high-quality milling capabilities, consider the DMG DECKEL MAHO DMC 635V machine we have for sale. Contact us for more information about this machine.

CNC controller: Heidenhain iTCN530 Axes X-axis travel mm: 1.250 Y-axis travel mm: 620 Z-axis travel mm: 620 C-axis degrees: 360º (0,001º) B-axis degrees: ±115 (0,001º) Worktable Table dimensions mm: 1.350 x 620 Max. workpiece weight kg: 1.000 Spindle Spindle speed rpm: 15.000 Spindle drive power kW: 22 / 17 Spindle torque Nm: 387 / 466 Tool system Tool holder: SK 40 Tool magazine slots: 60 Max. Tool Diameter: 150 Max. Tool Length mm: 220 Max tool weight kg: 7 Tool-to-tool time s: 3 Equipment Electronic Handwheel Signal lamp Tool breakage probe Paper band filter Chip conveyor with built-in scraper RENISHAW OMP 40-2 4th and 5th axis Lehmann (ø400 x 40mm x 40kg) Cooling Tank capacity: 340 L High-pressure bar: 20 Machine running times Under power: 75.294 Operating Time: 33.525 Basic machine dimensions / weight Weight kg: 8.000

This 4-axis CHIRON FZ 18 W was manufactured in 1993. It features dual 4th axes and is equipped with a SIEMENS SINUMERIK control system, enhancing its precision and efficiency. The addition of a chip conveyor aids in maintaining a clean work environment. Consider the opportunity to buy this CHIRON FZ 18 W vertical machining center. Contact us for more information about this machine.

This CHIRON FZ 12 W was manufactured in 1995. A vertical machining center featuring a SK30 spindle mount, maximum spindle speed of 10,000 rpm, and a tool magazine with 12 positions. It includes a Sinumerik 810D control system and rapid traverse rates up to 40 m/min. Table size measures 660 x 350 mm. Consider the opportunity to buy this CHIRON FZ 12 W vertical machining center. Contact us for more information.

Machine already ready for transport, to be assessed on viewing day. Needed for transport 7.5 mtr Auction-ID: A1-44905-97

This 3-axis Hartford Omikron VMC-1020 A was manufactured in 1998. Its a vertical machining center that recently had its X-axis bearings replaced. If you are looking to get high-quality milling capabilities, consider the Hartford Omikron VMC-1020 A machine we have for sale.Contact us for more information.

machine ready for transport and to be assessed on viewing day Auction-ID: A1-44905-142

machine ready for transport and to be assessed on viewing day Auction-ID: A1-44905-140

This 3-axis AXILE V4 vertical machining center was manufactured in 2019. It features a robust table size of 770 × 410 mm with a maximum load capacity of 400 kg. Equipped with a high-speed ISO40 spindle capable of 12,000 rpm, it ensures efficient machining. The machine includes a 30/32 tool arm changer and a rapid traverse rate of 36 m/min, enhancing productivity. Consider the opportunity to buy this AXILE V4 vertical machining center. Contact us for more information.

This 3-axis AWEA AF-650 vertical machining center was manufactured in 2017. It features a table size of 750 x 510 mm, can handle a maximum load of 500 kg, and offers axis travels of X = 650 mm, Y = 510 mm, Z = 510 mm. Equipped with a high-speed spindle at 20,000 rpm and a Fanuc 0i-MF CNC control, its ideal for precise machining tasks. Contact us for more information about this machine.

machine already ready for transport and to be assessed on viewing day, 8 loading meters needed for transport Auction-ID: A1-44905-132

This 3-axis Hardinge Bridgeport MMD VMC1250 P3 vertical machining centre was manufactured in 2006. It features a Siemens 810T control system and offers an impressive X-axis travel of 1250 mm, making it suitable for various milling applications. The machines transport dimensions are approximately 4400 mm in width, 5500 mm in depth, and 2900 mm in height. Consider the opportunity to buy this Hardinge Bridgeport MMD VMC1250 P3 machine we have for sale. Contact us for further details.

Hours: 42209 Robot included Machine already ready for transport, to be assessed on viewing day. Complete curtain-sided trailer required for machine transport Auction-ID: A1-44905-96

This 3-axis Hermle C 800 V vertical machining center was manufactured in 1996. It offers robust construction and precision for complex machining tasks. If you are looking to get high-quality milling capabilities, consider the Hermle C 800 V machine we have for sale. Contact us for more information about this machine.

This 3-axis YCM FX380A vertical machining center was manufactured in 2018. It features a high-speed IDD spindle at 12,000 RPM and a MAS-BT40 taper. Equipped with a 30-slot drum tool magazine and a robust 240-liter coolant system, it ensures efficient machining with a table load capacity of 200kg. The spindle supports cooling through the tool with a 20-bar pressure. Ideal for complex machining tasks, the YCM FX380A machine we have for sale. Contact us for more information. There are 2 equal units available.

This 3-axis Victor Vcenter A-110 was manufactured in 2009. It features a FANUC 21i-MB CNC, with a working range of X 1100, Y 600, Z 560, and a spindle speed up to 12000 rpm. It includes an ISO 40 tool holder and a 30-tool magazine, complemented by a conveyor and high-pressure system. Consider the opportunity to buy this Victor Vcenter A-110 vertical machining centre. Contact us for more information.

machine ready for transport and to be assessed on viewing day. Machine clamps not included Auction-ID: A1-44905-139

This 5-axis KAFO KFO 620 5AX was manufactured in 2019. It features a spindle speed of 12,000 rpm, a tool changer with a capacity of 40 tools, and a spindle taper SK 40. The machine dimensions are 4210x2325x3108 mm, and it weighs 9500 kg. It includes a chip conveyor, spindle oil cooler, and is CE compliant. If you are looking to get high-quality milling capabilities consider the KAFO KFO 620 5AX machine we have for sale. Contact us for more information.

machine ready for transport and to be assessed on viewing day Not included tooling Auction-ID: A1-44905-133

3-Axis vertical machine center manufactured in 2015, the ROMI D600 features a Siemens 828D CNC control system, enhancing precision and ease of use. Its spindle speed reaches up to 8,000 rpm with an ISO-40 taper, and a tool capacity of 20, supporting efficient operation. The worktable measures 840 x 500 mm, handling a maximum weight of 800 kg. Ideal for demanding tasks, it also includes a chip conveyor for hassle-free maintenance. Consider the ROMI D600 machine we have for sale for reliable and robust machining solutions. Contact us for more details.

This 5-axis RASOMA EBZ 200-500 was manufactured in 2018, featuring a robust 16,000 kg weight and comprehensive dimensions of 10800 × 2700 × 3100 mm. It includes a high-performance tool spindle with a 7.5 kW Siemens motor, capable of speeds up to 2000 rpm, and advanced cooling and hydraulic systems ensuring efficient operation. If you are looking to get high-quality milling capabilities consider the RASOMA EBZ 200-500 machine we have for sale. Contact us for more information about this machine.

This 3-axis Hurco VMX 30i was manufactured in 2014. It features a 760x510x610 mm working envelope, a 1020x510 mm table, and a high-speed spindle at 12000 rpm with SK40 taper. The machine includes a 40-piece tool changer and a chip conveyor. Renishaw probes enhance precision. If you are looking to get high-quality milling capabilities, consider the Hurco VMX 30i machine we have for sale. Contact us for more information about this machine.

machine ready for transport and assessment on viewing day Auction-ID: A1-44905-135

This 4-axis DECKEL MAHO DMC 60 H Hy Din horizontal machining center was manufactured in 2001. It features a robust direct drive motor with speeds up to 15,000 rpm and a torque of up to 191 Nm. The machine includes a versatile tool magazine with capacities ranging from 40 to 180 tools and a maximum tool weight of 12 kg. Ideal for complex machining tasks, the DECKEL MAHO DMC 60 H Hy Din machine we have for sale. Contact us for further details.

This 3-axis DECKEL MAHO DMC 64 V Linear was manufactured in 2004. A vertical machining center featuring a Heidenhain touch probe, iTNC 530 control unit, and a chip conveyor. It offers rapid traverse up to 100 m/min and X, Y, Z travel of 640 x 600 x 500 mm. If you are looking to get high-quality milling capabilities consider the DECKEL MAHO DMC 64 V Linear machine we have for sale. Contact us for more information.

This 5-axis Pinnacle BX300A was manufactured in 2012. It features a spindle speed of 15,000 rpm, a table size of 1300 × 610 mm, and a 24-position tool magazine. Equipped with a Mitsubishi M720VS control system, it supports complex machining with continuous rotation on the C-axis and tilting on the B-axis. Consider the opportunity to buy this Pinnacle BX300A vertical machining centre. Contact us for more information about this machine.

This 3-axis DOOSAN DNM 4500 vertical machining center was manufactured in 2020. It features a SIEMENS 828 D CNC controller, with X-axis travel of 800 mm, Y-axis travel of 450 mm, and Z-axis travel of 510 mm. The spindle operates at 12,000 rpm with a drive power of 16.5 kW. It includes a tool magazine with 30 slots and additional equipment like a chip conveyor and an electronic handwheel. Contact us for more information about this machine.

This Victor Vcenter-70APC Vertical Machining center was manufactured in the year 2007 in Taiwan. It is controlled by a Fanuc Series Ou-MC control unit and has 3 axis. The machine has a spindle speed of 8000 rpm. This machine has head repaired, Z-Spindle, telescopic with new wiper blades and the grippers of the changing arm also repaired. Includes an internal cooling, new bearings and new tie rod springs.