machining center used for sale

CONTROLS   CNC controls WORKING RANGE -CUBIC-   number of processing axes (excl parallel axes): 3   X-axis travel: 1040 mm   Y-axis travel: 510 mm   Z-axis travel: 640 mm TABLE   table surface (left-right): 1460 mm SPINDLE / HEAD   spindle revolutions (max): 7000 /min TOOL MAGAZINE   number of positions: 24 ELECTRICAL SPECIFICATIONS   mains voltage: 400 V   mains frequency: 50 Hz

A Primacon CNC high-precision vertical machining center for machining small workpieces in the medical sector is available. Axis travels X/Y/Z: 240mm/240mm/240mm, table dimensions X/Y: 350mm/300mm, max. table load: 60kg, spindle speed: 40000rpm, tool holder: HSK-25, feed rate: 12m/min, rapid traverse: 12m/min, positioning accuracy: +/-0.001mm, repeatability: +/-0.0005mm. Machine dimensions X/Y/Z: approx. 1900mm/1600mm/2200mm, weight: approx. 1000kg, control: Heidenhain. The spindle is occasionally not clamped correctly during the tool change process. The ventilation hose of the Z-axis rubs against the A-axis block. Documentation available. An on-site inspection is possible.

CONTROLS   CNC controls HEIDENHAIN MILL PLUS WORKING RANGE -CUBIC-   number of processing axes (excl parallel axes): 5   X-axis travel: 500 mm   Y-axis travel: 420 mm   Z-axis travel: 380 mm SPINDLE / HEAD   spindle revolutions (max): 18000 /min   tool fixture: HSK A63 AXIS DRIVES   feed velocity (max): 20000 mm/min   rapid traverse: 50000 mm/min TOOL MAGAZINE   number of positions: 60 ELECTRICAL SPECIFICATIONS   mains voltage: 400 V   mains frequency: 50 Hz DIMENSIONS / WEIGHTS   space requirements -left/right-: 2500 mm   space requirements -front/back-: 2600 mm   total height: 2440 mm   total weight approx.: 6000 kg ATTACHMENTS   zero-point workholding system: yes   chip conveyor: yes   coolant unit: yes   band filtration unit: yes   through spindle coolant attachment: yes   closed cabin: yes   European CE standards: yes Total spindle h ...

A Toyoda CNC horizontal machining center is available. X/Y/Z travel: 750mm/800mm/850mm, table dimensions X/Y: 550mm/550mm, spindle speed: 15000rpm, tool interface: SK40, tool magazine capacity: 60, weight: approx. 16000kg, power-on hours: 133870h, operating hours: 25394h, feed hours: 12802h. Including chip conveyor, 4th and 5th axis, and Knoll KF 400/2250. Documentation available. An on-site inspection is possible.

A DMG Mori CNC 4-axis machining center is available. X/Y/Z-axis travel: 730mm/730mm/880mm, spindle speed: 20000rpm, rapid traverse: 60m/min, feed rate: 60m/min, feed force: 10kN, tool interface: HSK-A63, number of pallets: 2, max. workpiece weight: 500kg, tool positions: 40, control: Siemens Sinumerik 840D sl Operate, power-on hours: 14948h, operating hours: 5251h. Including chip conveyor, pallet changer and coolant tank. Documentation available. An on-site inspection is possible.

Manufacturer: NORTE Year of manufacture: 2002 Model: VS 1000 Type of machine:Milling Machining Center Technical Details : - Machine weight: approximately 28,000 kg - Transport width: approximately 12,000 mm - Transport depth: approximately 4,800 mm - Transport height: approximately 4,500 mm - Working area, X axis travel: 8,000 mm, with pendulum machining at vertical spindle, 2 working areas of 2 x 3,765 mm - Working area, Y axis travel: 1,000 mm - Working area, Z axis travel: 1,000 mm - Feed range for X and Y axis: 1 to 20,000 mm per minute - Feed range for Z axis: 1 to 20,000 mm per minute - Maximum feed force X, Y, Z axis: 15,000 N - Rapid traverse X and Y axis: 20,000 mm - Rapid traverse Z axis: 20,000 mm - Protection class of feed drives: IP 64 - Voltage: three phase current 400 / 240 V, 3 phases / MP / 50 Hz - Control voltage with transformer: 24 V DC - Supply cable: minimum 4  ...

A Hurco CNC vertical machining center is available. Tool holder: SK50, travel X/Y/Z: 1270mm/660mm/610mm, max. table load: 1500kg, spindle speed: 8000rpm, tool stations: 30, rapid traverse: 30m/min. Machine dimensions X/Y/Z: approx. 4600mm/4600mm/3000mm, weight: approx. 9250kg. Documentation available. An on-site inspection is possible.

The Pittler WMZ PV4000 / 1-2 is a heavy CNC vertical turning machine with a portal design, featuring one workpiece spindle and two independently movable tool carriers. The machine enables turning, drilling, milling, and grooving. The right tool carrier is designed as a swiveling multifunction head with a B-axis and driven tools. Two separate chain magazines provide a total of 94 tool positions. Technical Data Machine Number: ZV029 Machine Concept: Portal machine with one workpiece spindle and two tool carriers Machining Processes: Turning, drilling, milling, and grooving Maximum Swing Diameter: 3800 mm Maximum Workpiece Diameter: 3800 mm Maximum Workpiece Speed: 100 min-1 Rated Speed: 36.7 min-1 Workpiece Clamping: Manual Chuck: Röhm Tool Holder: Capto C8 Tool Magazines: 2 chain magazines Tool Positions: 2 x 47 Total Number of Tool Positions: 94 Maximum Tool Diameter: 120 mm accordin ...

The Pittler WMZ PV4000 / 1-2 is a heavy CNC vertical turning machine with a portal design, featuring one workpiece spindle and two independently movable tool carriers. The machine enables turning, drilling, milling, and grooving. The right tool carrier is designed as a swiveling multifunction head with a B-axis and driven tools. Two separate chain magazines provide a total of 94 tool positions. Technical Data Machine Number: ZV029 Machine Concept: Portal machine with one workpiece spindle and two tool carriers Machining Processes: Turning, drilling, milling, and grooving Maximum Swing Diameter: 3800 mm Maximum Workpiece Diameter: 3800 mm Maximum Workpiece Speed: 100 min-1 Rated Speed: 36.7 min-1 Workpiece Clamping: Manual Chuck: Röhm Tool Holder: Capto C8 Tool Magazines: 2 chain magazines Tool Positions: 2 x 47 Total Number of Tool Positions: 94 Maximum Tool Diameter: 120 mm accordin ...

A Deckel Maho 5-axis CNC universal machining center is offered, including an Interlit compact filtration system for the coolant supply. 1) Deckel Maho DMU 70 eV 5-axis CNC universal machining center, year of manufacture: 2003, X/Y/Z travels: 750mm/600mm/520mm, B-axis: approx. 180°, C-axis: 360°, rapid traverse X/Y/Z: 50m/min, feed rate: approx. 20m/min, max. spindle speed: approx. 18000rpm, spindle power: approx. 25kW, max. rated power: approx. 35kW, spindle torque: approx. 87Nm, tool holder: SK40, table dimensions X/Y: approx. 700mm/500mm, max. table load: approx. 200kg, tool magazine: 32, weight: approx. 8500kg. 2) Interlit SUK 200-900 compact filtration system, year of manufacture: 2003, filter area: 0.2m², filling volume: 900l. Inspection by prior arrangement is possible.

X-axis: 635mm, y-axis: 510mm, z-axis: 460mm, clamping surface dimensions: 790x560mm, max. spindle speed: 8000rpm, control: Heidenhain TNC 620, connected load: 17kVA, spindle motor drive power: 8.4kW at 100% duty cycle, length: 3290mm, width: 2920mm, height: 2650mm, weight: 3.8t, operating hours: 27,125h, spindle hours: 8668h. Equipment: SK 40 DIN69871 tool holder, 20-position tool changer, coolant system 3.7bar, DMG TS 649 electronic touch probe, Heidenhain TT140 tool measurement system, Lehmann FA-510L-485 A-axis indexing unit s/n A756, four-jaw chuck, Vischer & Bolli zero-point clamping system, chip conveyor, chip cart, workbench with hand tools, milling and drilling tools, platform trolley for the indexing unit, tools and accessories, various tool holders approx. 36 pieces, various accessories, spare parts and documentation. An on-site inspection is possible.

X-axis: 635mm, y-axis: 510mm, z-axis: 460mm, clamping surface dimensions: 790x560mm, max. spindle speed: 8000rpm, control: Heidenhain TNC 620, connected load: 17kVA, spindle motor drive power: 8.4kW at 100% duty cycle, length: 3290mm, width: 2920mm, height: 2650mm, weight: 3.8t, operating hours: 27,125h, spindle hours: 8668h. Equipment: SK 40 DIN69871 tool holder, 20-position tool changer, coolant system 3.7bar, DMG TS 649 electronic touch probe, Heidenhain TT140 tool measurement system, Lehmann FA-510L-485 A-axis indexing unit s/n A756, four-jaw chuck, Vischer & Bolli zero-point clamping system, chip conveyor, chip cart, workbench with hand tools, milling and drilling tools, platform trolley for the indexing unit, tools and accessories, various tool holders approx. 36 pieces, various accessories, spare parts and documentation. An on-site inspection is possible.

DMF260/11 → Year of manufacture: 2011 Heidenhain TNC 530 Spindle SK 40 – 18,000 rpm Machine hours: 54,877 Spindle hours: 21,845 Condition: second-hand However, it is currently still in use and will be available in 2027 Find more here - .ucymachines/ Contact us at - sales@ucymachines

CONTROLS   CNC controls ROEDERS WORKING RANGE -CUBIC-   .. among of them simultaneous CNC axes: 3   X-axis travel: 500 mm   Y-axis travel: 450 mm   Z-axis travel: 300 mm SPINDLE / HEAD   spindle revolutions (max): 42000 /min   tool fixture: HSK A40 TOOL MAGAZINE   number of positions: 40

CONTROLS   CNC controls HEIDENHAIN ITNC 620 WORKING RANGE -CUBIC-   number of processing axes (excl parallel axes): 3   .. among of them simultaneous CNC axes: 3   X-axis travel: 1000 mm   Y-axis travel: 550 mm   Z-axis travel: 550 mm TABLE   table surface (left-right): 1100 mm   table surface (front-back): 550 mm   workpiece load (max): 800 kg SPINDLE / HEAD   spindle type: vertical   spindle revolutions (max): 10000 /min   tool fixture: ISO SK 40   drive power: 13.5 kW AXIS DRIVES   feed velocity (max): 10000 mm/min   rapid traverse X: 36000 mm/min   rapid traverse Y: 36000 mm/min   rapid traverse Z: 36000 mm/min TOOL MAGAZINE   magazin type: disc magazine   number of positions: 30   tool diameter max.: 76 mm   tool length max.: 250 mm   tool weight max.: 6 kg ELECTRICAL SPECIFICATIONS   mains power supply: 15 kVA DIMENSIONS / WEIGHTS    ...

CONTROLS   CNC controls SIEMENS 840 D SL WORKING RANGE -CUBIC-   number of processing axes (excl parallel axes): 4   X-axis travel: 210 mm   Y-axis travel: 270 mm   Z-axis travel: 360 mm SPINDLE / HEAD   spindle revolutions (max): 40000 /min   tool fixture: HSK A40 TOOL MAGAZINE   number of positions: 64 AUTOMATIC WORKLOAD EQUIPMENT   workpiece manipulator: articulated robot   number of store positions: 32 ELECTRICAL SPECIFICATIONS   mains voltage: 400 V   mains frequency: 50 Hz DIMENSIONS / WEIGHTS   total weight approx.: 9000 kg ATTACHMENTS   chip conveyor: yes   coolant unit: yes   band filtration unit: yes   closed cabin: yes Operating hours: Spindle 1: 4050 h, Spindle 2: 11,114 h Internal cooling 70 bar Fanuc Automation Robot M-10IA Integrated workpiece changing device Knoll coolant tank Knol KF 400/900

CONTROLS   CNC controls SIEMENS 840D SL 4.8 WORKING RANGE -CUBIC-   number of processing axes (excl parallel axes): 4   X-axis travel: 210 mm   Y-axis travel: 270 mm   Z-axis travel: 360 mm SPINDLE / HEAD   spindle revolutions (max): 40000 /min   tool fixture: HSK A40 TOOL MAGAZINE   number of positions: 72 AUTOMATIC WORKLOAD EQUIPMENT   workpiece manipulator: articulated robot   number of store positions: 36 ELECTRICAL SPECIFICATIONS   mains voltage: 400 V   mains frequency: 50 Hz DIMENSIONS / WEIGHTS   space requirements -left/right-: 8500 mm   space requirements -front/back-: 2500 mm   total weight approx.: 6000 kg ATTACHMENTS   central lubrication system: yes   chip conveyor: yes   coolant unit: yes   through spindle coolant attachment: yes   European CE standards: yes -Siemens tool management with retooling -Fanuc Automation Robot M-10IA  ...

Version: T1-T1C-T5C-T6CN2, tool magazine: RACK T95, number of tool positions: 95, workpiece dimensions for parts longer than 3500mm: width: 50-140mm, thickness: 50-92mm, tool identification: chip, Balluff, extraction hoods: automatic movement for machining long parts, control: Siemens 840 D SL. Equipment: transport system, 1x motorized roller conveyor, 6000mm with pusher device. Loading system: motorized roller conveyor, length: 3880mm, with single pusher device, 2x motorized central structure, with driven belts, 3000x2000mm, speed: 15m/min, power: 0,37kW, 1x small motorized central structure, with driven belts, 1500x2000mm, speed: 15m/min, power: 0,37kW, 1x liftable roller conveyor, length: 3800mm, power: 0,37kW, 1x liftable roller conveyor, length: 2290mm, power: 0,37kW. Parking system: 1x motorized roller conveyor, length: 3070mm, with single pusher device, speed: 60m/min, power: 0,37 ...

X-axis: 640mm, Y-axis: 600mm, Z-axis: 500mm, feed force (40% duty cycle) X-, Y-, Z-axis: 7000N, max. feed speed X-, Y-, Z-axis: 40m/min, rapid traverse speed Y-, Z-axis: 40m/min, rapid traverse speed X-axis: 70m/min, ball screw diameter/pitch Y-, Z-axis: 40/15mm, number of magazine pockets: 30, position coding: fixed-position coding, max. tool loading weight: 90kg, max. diameter of standard tools: 100mm, max. diameter of special tools with adjacent positions free: 140mm, max. tool length: 300mm, max. tool weight: 6kg, table clamping surface: 850x600mm, T-slots: DIN 650-14, loading height (top edge of table): 850mm, max. load: 600kg, connected load: 39kVA, control: Heidenhain iTNC 530, length: 2500mm, width: 4100mm, height: 3000mm, weight: 7,74t, operating hours: 60.366h. With documentation.

A KERN 5-axis CNC machining center with EROWA Robot Compact is offered. Travel X/Y/Z: 500mm/500mm/400mm, simultaneous 5-axis machining, hydrostatic guideways in the X and Y axes, swivel range: -10° to +110°, feed rate X/Y/Z: 30m/min, max. acceleration: 10m/s², max. spindle speed: 40000rpm, spindle power: 37kW, max. torque: 12000rpm, tool taper: HSK-E40, tool magazine: 50, tool change time: approx. 3s, control: Heidenhain iTNC 530 smart.TNC, laser tool measurement, workpiece touch probe, EROWA PowerChuck P, EROWA Robot Compact year of manufacture 2013 with 70 magazine positions, including 55 positions ITS 72 and 15 positions ITS 148, max. transfer weight pallet incl. workpiece: 30kg, automatic loading and unloading of the magazine also possible during machining, machining medium: oil, belt filter system and max. high-pressure supply 80bar, oil mist extraction system and fire extinguish ...

CNC vertical machining center Type: DNM 500 Manufacturer: Doosan Year: 2018 Spindle overhauled in 2023 Control: Siemens Sinumerik 828 D X: 1020 mm Y: 540 mm Z: 510 mm Spindle speed: 10000 rpm Spindle taper: BT 40 Table: 1200 x 540 mm Max table load: 800 kg Tool magazine 32 positions Machine dimensions: 3000 x 2550 x 2740 mm Machine weight: 6500 kg Tool probe Work probe Chip conveyor Tool holders Machine in good condition, under power. Find more here - .ucymachines/ Contact us at - sales@ucymachines

Manufacturer: Samag Model: MFZ 2-2 Units Available: 3 Years of Manufacture: 2006, 2007, and 2003 Technical Specifications: - Total weight: 24,000 kg (per nameplate); general weight 22,000 kg, comprising base machine 20,000 kg, empty clean water tank 930 kg, and empty chip conveyor 450 kg - Dimensions with coolant tank and chip conveyor: 5.50 x 6.00 x 3 m - Dimensions during maintenance: 6.00 x 6.50 x 3 m - Connection power: 72 kVA / 72 kW - Mains voltage: 3 x 400 V AC, plus or minus 10 percent - Frequency: 50 Hz - Control voltage: 230 V AC / 24 V DC - Fuse protection ahead of main switch: 3 x 160 A - Numerical control: manufacturer Indromat type MTC200 - Operating panel: main control panel consisting of flat control panel BTV 20.3, machine control panel BTM 16.2, and CNC full keyboard VAK 40.1, with workpiece loading station at the right operating panel - Pneumatic operating pressur ...

Manufacturer: BURKHARDT + WEBER GmbH Model (Typ): MC 100 S0 Machine Type: CNC Horizontal Machining / Boring Center (floor-type) Country: Germany Delivery Date: July 1992 Series: MC Series (Modular Machining Centers) Travels X (Column travel): ~3,000 – 5,000 mm Y (Vertical): ~2,000 – 2,500 mm Z (Ram): ~800 – 1,200 mm W (Spindle quill): ~500 – 800 mm Spindle Diameter: 100 mm (this is what MC 100” refers to) Spindle Taper: ISO 50 / SK50 Spindle Speed: ~2,000 – 3,000 rpm Main Motor Power: ~30 – 50 kW Auction-ID: A1-49190-14

X=3700mm Y=1440mm, Z=150mm Moving speed: X: 80 m/min, Y: 80 m/min, Z: 20 m/min 8 supports with vacuum cups, pneumatic clamping 8 fences at the rear 8 fences in front 2 left fences and 2 right fences 6 rails for panel loading with pneumatic lifting Positioning the vacuum cups using a laser 1 connection for templates Vacuum pump with flow rate 100 m3/h Configuration V25,H8X/6Y, N1 X-Y 90?, F1-HSK63-15KW,F1-HSK63-9KW, C axis, W14 rear Main motor 15 kW, 1250-24000 rpm, air-cooled, 360? C-axis, C-axis interpolation axis, HSK 63 mounting C axis extension for flex-5 aggregate Main motor 9 kW, 1250-24000 rpm, air cooled, HSK 63 mounting Tool changer operating in X direction with 14 positions, rear mounted 2 x 4 vertical X drilling pins, 2 x 3 vertical Y drilling pins 14 horizontal drilling spindles 90? groove saw X-Y direction PC 85 power control software with: Woodwop: workshop-oriented program ...

Working area: X 5200 x Y 1260 mm Heading of main spindle: X 5709 mm, Y 1650 mm 8 workpiece consoles Equipment: Drilling unit with 18 spindles, 12 vertical sp?ndles, 6 horizontal spindles (4 in direction X , 2 in direction Y ) Grooving saw Milling motor 11 kW, 20000 rpm max, HSK-F 63 take-up, liquid-cooled, 5-axis controlled Tool changer with 16 positions Laterally positioned changer with 8 positions PC control

Bridge type Capacity for all units: 3300 x 1100 mm (alternating: 2 x 1025 x 1100 mm) Capacity for routing with tooldiameter 25 mm: 1550 mm Workpiece thickness up to 300 mm (stroke Z-axis 600 mm) Speed in X and Y: 60 m/min, Z: 25 m/min, Vector: 85 m/min 6 Support rails with LED positioning indication Vacuum: 100/140 m3/h Controlls: Powercontrol PC85 Waste/chip removal belt in machine base Machine pneumatically prepared to take pneumatic clamps, 3 pcs clamps included Drilling unit V9/H4, 13 spindles, motor 2,2 kW Main spindle DRIVE5C+, 5-axis, 10 kW, HSKF63 taper, speed 1000 to 24000 r/min, tooldiameter up to 180 mm for routing, 350 mm for cutting 14-fold rotary toolchanger and pick-up place for a sawblade Woodwop software

Working field: axis x: 2310 mm, axis y: 628 mm, axis z: 90mm Max programmable speed: axis x: 100 m/min, axis y: 75 m/min, axis z: 15 m/min Drill chuck: diameter 10 mm Spindle speeds: 4000 rpm Grooving saw: diameter 120 mm Drill spindles: 4 horizontal spindles in X, 12vertical spindles in X line Working air pressure: 6 bar Max consumption of compressed air: 0,75 NL/cycle Installed power: max 7.5 kW Capacity of vacuum tools: 40 m?/h CNC: screen: monochromatic 9? Floppy disk unit PLC for control of the machine cycle

Working field: axis x: 3200 mm, axis y: 944 mm, axis z: 110mm Max programmable speed: axis x: 100 m/min, axis y: 75 m/min, axis z: 15 m/min Drill holder: diameter 10 mm Spindle speeds: 4000 rpm Grooving saw: diameter 120 mm Drill spindles: 24 horizontal spindles in X, 10 vertical spindles in X line Working pressure air pressure: 6 bar Installed power: max 25 kW Capacity of vacuum tools: 40 m?/h CNC: screen: monochromatic 9? Floppy disk unit

Working area: X 5005 x Y 1520 mm x Z 200 mm Main spindle travel: X 5910 mm, Y 1815 mm, Z 655 mm. Travel speed: X 80 m/min, Y 80 m/min, Z 25 m/min 8 workpiece consoles with automatically positioning vacuum cups Equipment: Drilling unit with 19 spindles, 7 vertical spindles in X, 6 vertical spindles in Y, 2 double horizontal spindles in X, 1 double horizontal spindle in Y Slotting saw Milling motor 12 kW, 1000?24,000 rpm, HSK-F 63 mounting, liquid-cooled, 5-axis controlled Tool changer with 22 positions Vacuum pumps with 2 x 100 m?/h capacity PC control Masterwork software Integrated waste conveyor

Window machining center Dimensions of workpieces: Workpiece length: 270 x 3000 mm Workpiece thickness: 30 - 85 mm Workpiece width: 180 mm Equipment: Electric length stop Crosscut saw, diameter 400 mm, motor 3 kW Tenoning spindle, diameter 50 mm, useful shaft length 600 mm, motor 7.5 kW 3 x profile shaft, diameter 50 mm, length 600 mm, motor 7.5 kW Glazing bead saw, diameter 200 mm, effective shaft length 20 mm, motor 2.2 kW Feed device 1.5 kW, roller diameter 120 mm Oertli tools included profile 68, 78, 82

CONTROLS   CNC controls HEIDENHAIN ITNC 530 WORKING RANGE -CUBIC-   number of processing axes (excl parallel axes): 5   X-axis travel: 600 mm   Y-axis travel: 450 mm   Z-axis travel: 450 mm   rotating range B-axis from: -115 °   rotating range B-axis up to: 30 °   rotating range C-axis from: 0 °   rotating range C-axis up to: 360 ° TABLE   clamping surface diameter: 450 mm   workpiece load (max): 200 kg SPINDLE / HEAD   spindle revolutions (max): 20000 /min AXIS DRIVES   rapid traverse X: 22000 mm/min TOOL MAGAZINE   number of positions: 220 ELECTRICAL SPECIFICATIONS   mains voltage: 400 V   mains frequency: 50 Hz DIMENSIONS / WEIGHTS   space requirements -left/right-: 4400 mm   space requirements -front/back-: 3400 mm   total height: 2700 mm   total weight approx.: 8000 kg ATTACHMENTS   digital display: yes   chip conveyor: yes   coola ...

DECKEL MAHO - DMU 50 T Offer details Stock number 1039-9277 Machine Type Machining Center - Universal Manufacturer DECKEL MAHO Type DMU 50 T Year of construction 1998 Control TNC 426M Heidenhain Storage location D-59302 Oelde Country of origin Germany Delivery time by arrangement Freight base from location Additional information CNC - Machining Center Universal DECKEL MAHO - DMU 50 T - 5 axles (3 + 2) - Swivel rotary table with angle display (axes B+C manually by handwheel) Technical details x-travel 500 mm y-travel 400 mm z-travel 400 mm Control TNC 426M Heidenhain Main spindle: Speed range - main spindle 20 - 9,000 rpm/-1 Drive power - main spindle 9 / 13 kW Max. torque 57 / 82 Nm Tool holder ISO 40 DIN 69871 Swivel rotary table: Table diameter 700 x 500 mm swivel B: 105° (-10°/+95°) man. rotatable 360° man. max. table load 200 kg Number of  ...

DECKEL MAHO - DMU 80 monoBLOCK 1213 Offer details Stock number 1039-9301 Machine Type Machining Center - Universal Manufacturer DECKEL MAHO Type DMU 80 monoBLOCK 1213 Year of construction 2006 Control iTNC 530 Heidenhain Additional information 5 Axis CNC Machining Center Universal DECKEL MAHO - DMU 80 monoBLOCK - NC rotary table (C-axis) integrated into rigid table - Swivel milling head (B-axis) Technical details x-travel 880 mm y-travel 630 mm z-travel 630 mm Control iTNC 530 Heidenhain Main spindle: Speed range - main spindle max. 18,000 rpm/-1 Drive power - main spindle 28 / 19 kW Max. torque 121 Nm Tool holder HSK-A 63 Swivel B: +30° / -120° NC rotary table: Table clamping surface Ø 700 / 1,250 x 700 mm max. table load 650 kg Rotatable C: 360° Tool magazine: Number of tool stations 2x16 pos. Tool holder HSK-A 63 max. tool diameter 80 mm max. ...

REIDEN - BFR 22 Offer details Stock number 1039-9086 Machine Type Machining Center - Universal Manufacturer REIDEN Type BFR 22 Year of construction 2003 Control TNC 430 Heidenhain Country of origin Switzerland Additional Information 4-Axis Machining Center - Universal REIDEN - BFR 22 - Incl. 2x tool cabinets for recordings - incl. 3x pull-out cabinets - incl. 1x workbench - Incl. Ringler chip vacuum cleaner Technical details x-travel 2,000 mm y-travel 1,000 mm z-travel 1,200 mm Control TNC 430 Heidenhain Main spindle: Speed range - main spindle 20 - 5,000 rpm/-1 Gear stages 2 Drive power - main spindle 30 (100%) / 45 (40%) kW Torque 1,050 / 1,580 Nm Tool holder HSK 100 Swivel B: +/- 180° Pitch B: 0.001° Work table: Table clamping area 1,000 x 2,000 mm max. table load 4,000 kg Groove spacing 100 mm T-slots 18 H7 Number of T-slots 10 Tool magazin ...

DECKEL MAHO - DMU 125 T Machine is delivered with new discs. Offer details Stock number 1039-8700 Machine Type Machining Center - Vertical Manufacturer DECKEL MAHO Type DMU 125 T Year of construction 1998 Control TNC 426 Heidenhain Country of origin Germany Additional information CNC - Vertical machining center DECKEL MAHO - DMU 125 T - IKZ Technical details x-travel 1,250 mm y-travel 880 mm z-travel 800 mm Control TNC 426 Heidenhain Main spindle: Speed range - main spindle max. 12,000 rpm/-1 Drive power - main spindle 15 / 10 kW Max. torque 500 Nm Tool holder SK 40 Work table: Table clamping area 1,500 x 1,050 mm Max. table load 2,500 kg Number of T-slots 10 T-slots - width 18 H7 mm T-slots - spacing 100 mm Tool Changer: Number of tool locations 30 pos. max. tool diameter 80 mm max. tool diameter. with a free neighboring box. 160 mm max. tool l ...

OPTIMUM - OPTImill F 105 CNC Offer details Stock number 1039-8705 Machine Type Machining Center - Vertical Manufacturer: OPTIMUM Type OPTImill F 105 CNC Year of construction 2019 Control Sinumerik 808D adv. Siemens Additional Information CNC Machining Center Vertical OPTIMUM - OPTImill F 105 CNC - DEMONSTRATION MACHINE Technical details x-travel 550 mm y-travel 305 mm z-travel 460 mm Control Sinumerik 808D adv. Siemens Main spindle: Speed range - main spindle 10 - 10,000 rpm Drive power - main spindle 11 / 7.5 kW Max. torque 70 / 48 Nm Tool holder BT 40 Work table: Table clamping area 800 x 320 mm max. table load 300 kg T-slots 3x 14 x 100 mm Distance spindle / table 100 - 600 mm Tool Changer: Number of tool positions 12 pos. Tool holder BT 40 max. tool diameter 70 mm max. tool weight 6.0 kg Tool-tool changeover time 7.0 sec Feeds: Rapid traverse  ...

DECKEL MAHO - DMU 80 T Offer details Stock number 1039-9228 Machine Type Machining Center - Universal Manufacturer DECKEL MAHO Type DMU 80 T Year of construction 2002 Control iTNC 530 Heidenhain Country of origin Germany Additional information CNC - Machining Center Universal DECKEL MAHO - DMU 80 T - 5-axis - Rotary table in rigid table Technical details x-travel 880 mm y-travel 630 mm z-travel 630 mm Control iTNC 530 Heidenhain Main spindle: Speed range - main spindle 20 - 10,000 rpm/-1 Drive power - main spindle 13 kW Torque 130 Nm Tool holder BT 40 Work table: Table clamping area 1,250 x 700 mm max. table load approx. 500 kg Table diameter 700 mm T-slots 11x 14 x 63 mm Max. table speed 15 min/-1 Tool magazine: Number of tool positions 32 (2x 16) pos. Tool holder BT 40 max. tool diameter 80 / 130 mm max. tool diameter. with a free neighboring  ...

DECKEL MAHO - DMU 80 monoBLOCK 3233 Offer details Stock number 1039-9302 Machine Type Machining Center - Universal Manufacturer DECKEL MAHO Type DMU 80 monoBLOCK 3233 Year of manufacture 2007 Control iTNC 530 Heidenhain Country of origin Germany Additional information 5 Axis CNC Machining Center Universal DECKEL MAHO - DMU 80 monoBLOCK - NC rotary table (C-axis) integrated into rigid table - Swivel milling head (B-axis) Technical details x-travel 880 mm y-travel 630 mm z-travel 630 mm Control iTNC 530 Heidenhain Main spindle: Speed range - main spindle max. 18,000 rpm/-1 Drive power - main spindle 28 / 19 kW Max. torque 121 Nm Tool holder HSK-A 63 Swivel B: +30° / -120° NC rotary table: Table clamping surface Ø 700 / 1,250 x 700 mm max. table load 650 kg Rotatable C: 360° Tool magazine: Number of tool stations 2x16 pos. Tool holder HSK-A 63 max. ...

CONTROLS   CNC controls SIEMENS 840 D WORKING RANGE -CUBIC-   number of processing axes (excl parallel axes): 4   .. among of them simultaneous CNC axes: 3   X-axis travel: 1000 mm   Y-axis travel: 800 mm   Z-axis travel: 1100 mm SPINDLE / HEAD   tool fixture: HSK E100 AUTOMATIC WORKLOAD EQUIPMENT   number of store positions: 4 ELECTRICAL SPECIFICATIONS   mains voltage: 400 V   mains frequency: 50 Hz DIMENSIONS / WEIGHTS   space requirements -left/right-: 6800 mm   space requirements -front/back-: 3000 mm   total height: 3200 mm   total weight approx.: 20000 kg

Manufacturer: HELLER Model: MCH 250 Machine Type: Horizontal Machining Center Application Type: Milling Year: 2007 Control Unit: • Control Brand: SIEMENS • Control Model: 840D Movement: • Number of Axes: 4 • X-Axis Travel: 800 mm • Y-Axis Travel: 800 mm • Z-Axis Travel: 800 mm Technical Specifications: • Spindle Speed: 6,000 RPM • Tool Holder: BT50 • Number of Tool Positions: 100 Additional Information: • 4th-axis rotary table with 1 degree indexing • Workpiece/tool probing system (touch probe) Find more here - .ucymachines/ Contact us at - sales@ucymachines

vertical machining center, year 2019, 3500 operating hours, CNC CNC-C00. Used machine in good condition. More info & price on IndustrialBuyer.

DECKEL MAHO - DMU 125 T Stock number 1039-8230 Machining Center - Vertical Control TNC 430 Heidenhain Country of origin Germany Additional information: Machine is delivered with new discs. Technical details: x-travel 1,250 mm y-travel 880 mm z-travel 800 mm Control TNC 430 Heidenhain Main spindle: Speed range - main spindle max. 12,000 rpm/-1 Drive power - main spindle 15 / 10 kW Max. torque 500 Nm Tool holder SK 40 Work table: Table clamping area 1,500 x 1,050 mm Max. table load 2,500 kg Number of T-slots 10 T-slots - width 18 H7 mm T-slots - spacing 100 mm Tool Changer: Number of tool positions 60 pos. max. tool diameter 80 mm max. tool diameter. with free neighboring box. 160 mm max. tool length 315 mm max. tool weight 8 kg max. total weight 100 kg Feeds: Rapid traverse ( X / Y / Z ) 15 m/min Feed speed 10,000 mm/min Total power require ...

With roller infeed table and automated pusher, table size approximately 1000x3400mm and 1000x2840mm, outfeed roller table size 1000x3400mm, 1x Gasco dowel infeed unit and safety fence Auction-ID: A1-48377-8

MORI SEIKI - SH 400 Stock number 1039-9177 Machining Center - Horizontal Manufacturer MORI SEIKI Type SH 400 Built in 1999 Control MSC 502 Country of origin: Japan Technical details: x-travel 560 mm y-travel 510 mm z-travel 510 mm Control MSC 502 Distance from spindle center to table 50 - 650 mm Distance between spindle nose and table center 100 - 610 mm Main spindle: Speed range - main spindle max. 12,000 rpm/-1 Drive power - main spindle 22 / 18.5 kW Tool holder MAS BT-40 Spindle bearing diameter 70 mm Pallet changer: Number of pallets 2 Pallet size 400 x 400 mm max. workpiece diameter 580 mm max. workpiece height 650 mm B - Axis Switching time 90°: 2.5 sec Pallet change time 6.0 sec Tool Changer: Number of tool positions 60 pos. Tool holder MAS BT-40 max. tool diameter 80 mm max. tool diameter. with free neighboring box. 125 mm max. tool l ...

Horizontal CNC machining center : machine designed to carry out milling, drilling, boring and tapping on the same workpiece, with tool changer and automatic pallet exchange. This configuration improves productivity, rigidity, and chip evacuation. Model OKK HM6300S , serial no. 455 , manufacturing no. MAM5032 , dated 2014.02 . Strokes: X 800 mm , Y 750 mm , Z 880 mm . Spindle speed: 35 to 12,000 rpm . Fast Advances: X/Y/Z 60 m/min (X 75 m/min optional). Working Feed: 1 to 10,000 mm/min . BIG-PLUS BT50 spindle, 7/24 taper. Diameter marked Ø69.85 mm , useful length 136.8 mm , total length 146.8 mm , dimension marked 35 mm . Mitsubishi/FANUC 30/25 kW spindle motor. Power supply: AC380V , 3 phases , 50 Hz , 59 kVA , 85 A , 114 A , 18 kA cut-off capability, E61-1104/A electrical diagram. Visible equipment: Renishaw OMI-2 and HABOR HBO-V2RPTSBM5 oil cooler (3PH 200-220V 50/60Hz, 375 ...

With 4 Becker vacuum pumps, switch cabinet, Tretek infeed belt conveyor 1900x3700mm, outfeed belt conveyor 4200x2100mm,Yaskawa 6-axis pick-n-place robot with Schmalz vacuum lifting device, switch cabinet and remote controller Auction-ID: A1-48377-3

HURCO BMC 20 / BMC 20P CNC Vertical Machining Centre Type: CNC vertical machining centre Manufacturer: Hurco Model: BMC 20 Control: GSK CNC Axes: 3-axis Machine configuration: Vertical spindle machining centre Table size: approx. 760 x 350 mm X-axis travel: approx. 560–610 mm Y-axis travel: approx. 355 mm Z-axis travel: approx. 355–406 mm Spindle taper: SK40 Spindle speed: approx. 60–6000 rpm Spindle motor power: approx. 7.5 kW / 10 HP Tool changer: 16-position automatic tool changer, Maximum table load: approx. 250 kg / 550 lbs Voltage: 3-phase Frequency: 50–60 Hz Machine dimensions: approx. 2,200 x 2,250 x 2,250 mm Machine weight: approx. 2,500–2,850 kg Condition: Used Functionality: Powered on; spindle and machine movement observed in video; full functionality Description This Hurco BMC 20 / BMC 20P is a CNC vertical machining ...

Numerical parameters recorded Machine Model: HM630 Machine Number: 535 Production number: MAI4241 (photo reading, to be confirmed) Date of Manufacture: 2017.11 Power supply: AC380V Phase: 3 Frequency: 50 Hz Rated Apparent Power: 65 kVA Current: 99 A / 118 A Cut-off capacity: 18 kA Spindle Interface: Standard P50T Taper: 7/24 Marked Ø : 69.85 mm Marked length: 136.8 mm Overall length marked: 146.8 mm Marked dimension: 35 mm Maximum Tool Weight: 25 kg Indicated stress: 9.8 × W × L ≤ 29.4 N·m Auction-ID: A1-49171-2

HERMLE C 42 U 5-axis CNC machining center equipped with an automated cell with robotic palletizer and large tool magazine, intended for intensive industrial production. This configuration allows: Automated Manufacturing Without Operator Serial or continuous production (24/7) Reduced parts changeover times Productivity Optimization Ideal machine for: Advanced CNC Workshops Industrial production Mechanical subcontracting demanding sectors: medical, aeronautics, watchmaking, precision mechanics The presence of the robotic system and the high-capacity magazine represents a major added value compared to a standard machine. Auction-ID: A1-48554-1

Auction-ID: A1-48554-2