machining center used for sale

x-travel: 885 mm y-travel: 600 mm z-travel: 600 mm control: iTNC 530 Heidenhain Main spindle:: Max. rpm: 1 - 28.000 min/-1 power capacity - main spindel: 35 / 25 kW max. Torque: 119 / 85 Nm tool taper: HSK A63 Swivel range milling spindle: B: -10° / +110° ° spindle bearing diameter: 80 mm rotary table:: table diameter: 750 mm rotation range: C: 360 ° rotary speed: max. 100 min/-1 max. table load: 600 kg feeds:: feed speeds: 1 - 90.000 mm/min rapid traverse: 90 m/min Feed force: X/Y: 13,8 kN Feed force: Z: 10,35 kN tool magazin:: number of toolpositions: 30 pos. max. tool diameter: 80 mm max. tool-dia with free toolbox: 140 mm max. tool length: 300 mm max. tool weight: 10 kg Workpiece dimension: max. workpiece height: 460 mm Max. Workpiece Area: ca. 750 x 600 mm passage: max. 600 mm total power requirement: 60 kVA weight of the machine ca.: 12 t dimensions of the machine ca.: 4,5 ...

x-travel: 800 mm y-travel: 800 mm z-travel: 800 mm Control: iTNC 530 Heidenhain Main spindle:: Max. rpm: 18.000 min/-1 power capacity - main spindel: 28 / 19 kW max. Torque: 121 / 82 Nm tool taper: HSK-A63 swivellable: B: 0 - 190 ° swivle time: 1,2 s NC-Rotary table:: table diameter: 900 x 700 mm max. table load: 1.400 kg rotatable: C: 360 ° tool magazin:: number of toolpositions: 40 pos. tool taper: HSK-A63 change-time chip to chip: ca. 5,0 sec feeds:: rapid traverse ( X / Y / Z ): 60 m/min rapid traverse: B: 30 m/min rapid traverse: C: 30 m/min feed speeds: max. 60.000 mm/min total power requirement: 64 kVA weight of the machine ca.: 14,0 t dimensions of the machine ca.: 6,5 x 6,5 x 3,5 m Documents: Coolantsystem: high pressure coolant: through spindle coolant: 40 bar turning milling head: NC-rotary table: Tool Magazine: Chip conveyor: tool monitoring: BLUM Laser elektr. h ...

x-travel: 4500 mm y-travel: 630 mm z-travel: 630 mm control: Siemens type: 810 M Tool changer: 40 Pos. spindle taper: ISO: 40 spindle turning speed range: 20-7100 U/min table surface area: 5100x680 mm spindle drive: 38 kW T-slot - width: 18 mm chip conveyor: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Table dimensions: 1.300 x 570 mm Courses (X/Y/Z) 1.050 X 570 X 510 mm - Number of tool stations: 30 - Rapid Traverse (X x Y x Z): 36 x 36 x 30 mm/min - Max. spindle speed: 12.000 rpm - Operating hours: 5.456 - Axes: 3

Used machine in good condition. Available for immediate delivery. - Max. tool length: 300/225 [350/225] - Number of tool stations: 33 - Control: HEIDENHAIN ITNC 530 - Working area (X x Y x Z): 650 x 650 x 550 mm - C-axis: 360 ? - Max. tool weight: 10 kg - Operating hours: 51.651 - Axes: 5 - Power: installed max: 16 kW - Weight: 13.000 - Dimensions (long x wide x high): 2.345 x 4.250 x 2.600 mm

- Tool measuring probe RENISHAW TS-23R - Rapid Traverse (X x Y x Z): 36 / 36 / 36 mm/min - Spindle taper: BBT40 - Travel (X x Y x Z): 1.000 x 560 x 600 mm - Number of tool stations: 30 (automatic) - Control: HW F i Series - Max. spindle speed: 12

- Auto power-off - Air blower - Chip conveyor - Spindle cooling (oil cooler) - 30 ATCs - Travel (X x Y x Z): 1.020 x 540 x 530 mm - Control: Fanuc 18iMB - Max. spindle speed: 12.000 rpm - Spindle type: BT 40

- Dataserver - AICC2 (200 blocks of read only) - S pindle cooling (oil cooler) - 30 ATCs - Chip conveyor - Travel (X x Y x Z): 1.000 x 550 x 500 mm - Number of tool stations: 30 - Working area (X x Y x Z): 1.100 x 500 mm - Max. spindle speed:

Used machine in good condition. Available for immediate delivery. - Travel (X x Y x Z): 800 x 510 x 630 mm - Working area (X x Y x Z): 950 x 510 mm - Max. workpiece weight: 500 kg - Axes: 3 - Weight: 5.800

Used machine in good condition. Available for immediate delivery. - Travel (X x Y x Z): 1.060 x 510 x 635 mm - Control: SIEMENS 828D - Working area (X x Y x Z): 1.200 x 500 mm - Max. workpiece weight: 800 kg - Max. spindle speed: 8.000 rpm - Spindle type: BT 40 - Dimensions (long x wide x high): 2.910 x 2.690 x 2.815 mm - Weight: 7.500

- Totally overhauled machine, with a NEW Control + New Crystal Rules - Travel (X x Y x Z): 380 x 380 x 255 mm - Number of tool stations: 6 - Working area (X x Y x Z): 700 x 350 x 2 mm - Max. workpiece weight: 75 kg - Max. spindle speed: 5.000 - 3.

Used machine in good condition. Available for immediate delivery. - Number of tool stations: 30 - Control: CNC - Max. workpiece weight: 17.600 kg - Max. tool weight: 66 kg - Axes: 4 - Weight: 77.175 - Dimensions (long x wide x high): 1.501 x 1.300 x 1.000 mm

Including: - Coolant Tray - Chip conveyor - Number of tool stations: 20 - Spindle power : 15 kW - Backgauge speed (X x Y x Z ): 24 x 24 x 20 mm/s - Travel (X x Y x Z): 762 x 435 x 510 mm - Working area (X x Y x Z): 920 x 436 mm - Max. workpiece weight: 600 kg - Max. spindle speed: 8.000 rpm - Operating hours: 6.700 - Axes: 3 - Weight: 500 - Dimensions (long x wide x high): 2.093 ? 1.962 ? 2.509 mm

Used machine in good condition. Available for immediate delivery. - Travel (X x Y x Z): 500 x 380 x 300 mm - Number of tool stations: 14 - Spindle taper: BT 30 - Spindle power : 2.2 kW - Control: CNC FANUC SERIE 16iM - Working area (X x Y x Z): 550 x 380 mm - Max. workpiece weight: 250 kg - Max. rapid traverse (X, Y, Z): 48 mm / min - Max. spindle speed: 1.000 rpm - Weight: 1.700 - Dimensions (long x wide x high): 1.565 x 1.907 x 2.216 mm

Used machine in good condition. Available for immediate delivery. - Travel (X x Y x Z): 500 x 400 x 330 mm - Number of tool stations: 14 - Spindle taper: BT 30 - Spindle power : 5.5 kW - Control: FANUC 16i-M - Working area (X x Y x Z): 600 x 400 mm - Max. workpiece weight: 250 kg - Max. spindle speed: 8.000 rpm - Dimensions (long x wide x high): 3.000 ? 2.000 ? 2.400 mm - Weight: 2.000

Used machine in good condition. Available for immediate delivery. - Number of tool stations: 24 - Travel (X x Y x Z): 760 x 410 x 510 mm - Control: FANUC Oi-MC - Working area (X x Y x Z): 920 x 430 mm - Max. spindle speed: 8.000 rpm - Axes: 3 - Dimensions (long x wide x high): 3.350 x 2.700 x 2.800 mm - Weight: 5.000

Used machine in good condition. Available for immediate delivery. - Rapid Traverse (X x Y x Z): 30.000 mm/min - Rapid Traverse (X x Y x Z): 650 x 400 x 305 mm/min - Number of tool stations: 22 - Spindle taper: BT-30 - Spindle power : 7,4 kW - Max. spindle speed: 16.000 rpm - Max. tool diameter: 80 mm - Max. tool weight: 3 kg - Coolant tank capacity: 200 l - Dimensions (long x wide x high): 3.248 x 1.837 x 2.696 mm - Weight: 3.500

Used machine in good condition. Available for immediate delivery. - Number of tool stations: 24 - Control: FANUC - Working area (X x Y x Z): 1.300 x 600 x 600 mm - Max. workpiece weight: 1.000 kg - Max. spindle speed: 9.000 rpm - Axes: 3 - Dimensions (long x wide x high): 3.550 x 2.568 x 2.171 mm

Used machine in good condition. Available for immediate delivery. - Spindle taper: BBT40 - Max. tool length: 300 - Number of tool stations: 30 - Spindle power : 18.5/11 kW - Rapid Traverse (X x Y x Z): 36 x 36 x 36 mm/min - Travel (X x Y x Z): 900 x 460 x 520 mm - Control: FANUC - Max. workpiece weight: 600 kg - Max. spindle speed: 12.000 rpm - Max. tool diameter: 80 mm - Chip extractor: YES - Internal cooling: YES - High pressure pump: 20 Bar - Axes: 3 - Dimensions (long x wide x high): 2.805 x 2.180 x 3.026 mm - Weight: 5.500

x-travel: 700 mm y-travel: 600 mm z-travel: 600 mm table surface area: 630 mm : 360 Grad angle of table min./max.: 45/20 Grad turning speeds: 6300 U/min control: Pfilips type: CNC 432 Tool changer: spindle taper ISO: 40 chip conveyor: total power requirement: 27 KVA weight of the machine ca.: 5,8 t dimensions of the machine ca.: 4,1x2,3x2,4 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

control: Siemens Sinumerik 840D table load: 0,7 t work piece spindle speed: 200 - 2300 U/min total power requirement: 12 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 710 mm y-travel: 510 mm z-travel: 510 mm Control: Mazatrol M 32 size of pallet: 500x500 mm spindle taper ISO: 40 turning speeds: 50-10000 U/min Spindle capacity: 7,35 KW tool magazin:: 60 Cooling through the spindle: bar numbers of pallets: 6 total power requirement: kW weight of the machine ca.: 8,5 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 1050 mm y-travel: 560 mm z-travel: 520 mm total power requirement: kW weight of the machine ca.: t required space: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

MAKA Systems GmbH Type: PA 37 Year of construction: 2006 Machining length: 11 m Operating hours: 23.792 Spindle exchange: 08/2018 MAKA CNC 5-axis machining center PA 37 for machining of aluminum profiles and (with clamping surface to be realized clamping surface) for aluminum sheets / plates. machining. Version with NC support crosshead positioning and with widened machine base frame to accommodate the required required drag chains, and with hydraulic workpiece clamping. Machine in travelling gantry design with drive on both sides (gantry drive). CNC-control BWO 930 in mobile operating- for 5-axis milling with RTCP function, memory 1 mB, with integrated PC with low power processor 1 GHz, hard disk 120 gB, with Windows-XP, 10" touch-screen display with touch-screen computer keyboard. Connections: 1 x VCS for screen, 4 x USB, 1 x mouse, 1 x keyboard, 1 x RS 232,  ...

2023 Haas UMC-500SS 5-axis vertical machining center Manufacturer: Haas Year: 02/2023 In production: 11/2023 X: 610 mm Y: 406 mm Z: 406 mm B: 120’ to 35-‘ C: 360’ Spindle speed: 12000 rpm Spindle taper: CT 40 Toolholders Vise Machine in very good condition, under power. Find more here - / Contact us at -

Manufacturer: OKUMA Model : Eurocenter V50 Year of construction : 2007 Operating hours: 11465 Accessories: dividing head, coolant tank with pump. Voltage: 400 V Phases: 3 Phase Frequency: 50 Hz Current: 28 A Power: 32 kW Fuse Rating: 45 A Certification: CE marked Find more here - / Contact us at -

x-travel: 1016 mm y-travel: 610 mm z-travel: 760 mm total power requirement: kW weight of the machine ca.: t required space: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 600 mm y-travel: 410 mm z-travel: 520 mm total power requirement: kW weight of the machine ca.: 2500 t required space: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Machining center Type: Optimat BHX 055 Manufacturer: Homag Weeke Year: 2015 Machine in good condition, under power Find more here - / Contact us at -

Manufacturer: Chiron Model: FZ15 S High Speed Year of Manufacture: 2007 Operating Hours: 48,000 h Find more here - / Contact us at -

HAAS VF-0 Vertical Machining Center YOM 1998 Table 660x356 mm X/Y/Z 508/406/508 mm Spindle speed 0-7500rpm Spindle motor 14.9kW Rapid feed rate 18m/min Tool Capacity 20 Max. part weight 340.3 kg Spindle taper BT40 Machine Weight 3175Kg Remark: The machine had worked small parts in the production of hunting and sporting rifles. Mechanically OK, Defective a cirquit board

x-travel: 1050 mm y-travel: 560 mm z-travel: 510 mm table-size: 1200 x 560 mm spindle taper ISO: 50 turning speed range: 15 - 4000 U/min feeds longditudinal/cross/vertical: 1 - 3000 mm/min rapid motion -longitudinal/cross/vertical: 10 m/min distance spindle nose and table: 150 - 660 mm distance spindle center to column: max. 650 mm table load: max . 1 t no. of tools in magazin: 24 tool diameter: 110 mm workpiece length: 350 mm weight of tools max.: 15 kg spindle drive: 7,5 kW control: FANUC 11 MA total power requirement: 13 kW weight of the machine ca.: 9,3 t dimensions of machine L x W x H: 3,55 x 2,64 x 2,68 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manufacturer: CMS Model: Avant-1/B-560-TX3/RR with a digital table Year of Manufacture: 2006 Type of Machine: 4-axis CNC machining center with a moving bridge - Moving bridge design with two racks. Fixed table during machining. - Welded steel support frame stabilized by double heat treatment - Mobile bridge supporting a set of two crossed slide carriages for transverse and vertical movement - Travels: o X axis: 5600mm o Y axis: 2050 mm o Z axis: 300 mm - Working and positioning speed: o X axis from 0 to 60 m/min, positioning speed of 60m/min o Y axis from 0 to 100 m/min, positioning speed of 100m/min o Z axis from 0 to 30 m/min, positioning speed of 30m/min - Automatic centralized lubrication - TX3 vertical head with tool changer mounted on Z-TX3/12/L vertical carriage o Head power: 15kw at 18000 rpm o Programmable rotation speed of 1800 to 24000 rpm o HSK63E cone - 2 ...

Weight: 350 kg Dimensions (L/W/H): 1930,0 × 1850,0 × 2490,0 mm x-axis: 610 mm y-travel: 305 mm z-travel: 520 mm table length: 760 mm table width: 360 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manufacturer: Homag, Type: Optimat BAZ 311/40/K, Year: 2007, Software: PC85 CNC CORE Z, Feeding speed max m/min: X,Y-80, Z-30, Working range X: 4000, Working range Y-axis: 1220, Working range Z: 12-300, Year :2007

Manufacturer: Weeke, Type: BP 140 Optimat, Year: 1997, Control: Woodworp, Working range X: 3600, Working range Y-axis: 1200, Working range Z: 150, C axis: yes, Number of milling spindles: 1, Milling engine 1 hours power: 7,5, rpm 1): 24000, Number of tool changers: 12, Vertical drills-X: 10, Drill vertical Y: 10, Horizontal drills-X: 4, Drill horizontal Y: 2, Traverse table: yes, Vacuum pumps m³/h: 160, Tool clamping system: HSK 63, Saw unit: yes, CE-Sign: yes, Year :1997

Manufacturer: Format 4, Type: Profit H20, Year: 2014, Feeding speed max m/min: X-80, Y-80, Z-20, Working range X: 3830, Working range Y-axis: 1680, Working range Z: 275, Vacuum pumps m³/h: 90, incl. tools: yes, Gesamtanschluss kw: 18, Weight approx. kg: 3350, Year :2014

Manufacturer: Biesse, Type: Rover 23, Year: 2000, Control: yes, Working range X: 2900, Working range Y-axis: 1300, Working range Z: 140, Milling engine 1 hours power: 7,8, Vertical drills-X: 10, Horizontal drills-X: 6, Weight approx. kg: ca. 3500, Year :2000

Manufacturer: SCM, Type: RECORD 100 AL XL TVN, Year: 2010, Working range X: 3110, Working range Y-axis: 1240, Feeding speed max m/min: X=60, Y=45, Z=30, Number of tables: 1, Traverse table: yes, Vacuum pumps m³/h: 250, Saw unit: yes, Magazine Qty: 12, Year :2010

Manufacturer: Busellato, Type: Jet 6000 XXL, Year: 1999, Working range X: 4600, Working range Y-axis: 1700, Working range Z: 150, Vertical drills-X: 11, Drill vertical Y: 9, Horizontal drills-X: 2+2, Drill horizontal Y: 2+2, Year :1999

Manufacturer: IMA, Type: Quadroform C 80/280, Year: 1995, Working range X: 2800, Working range Y-axis: 800, Tool adaption system: HSK 63 F, Milling engine 1 hours power: 7,5, rpm 1): 1500-18000, Number of tool changers: 8, Pickup Wechlser: yes, Vertical drills-X: 5, Drill vertical Y: 9, Number of tables: 1, 2 station allocation: yes, Stops in the table rear: yes, Vacuum pumps m³/h: 80, Saw unit: Wechlser, FREE TEXT: inkl Werkzeuge, Year :1995

Manufacturer: Reichenbacher, Type: Vision 2 Sprint, Year: 1999, Control: Simumerik 840 D, Working range X: 6140, Working range Y-axis: 1600, Working range Z: 480, Feeding speed max m/min: 60, Pendulum processing: yes, Number of milling spindles: 4, Milling engine 1 hours power: 4,8, 2 station allocation: yes, 4 station allocation: yes, Vacuum pumps m³/h: 160, Year :1999

Manufacturer: IMA, Type: BIMA 610 V, Year: 1998, Software: IMAWOP 5.0, Programming station office: IMAWINCAD , Work piece width min-max mm: 1.400, Min.-max. workpiece length in mm: 5.000, Min.-max. workpiece height in mm: 40/100, Pendulum processing: 2 x 1.750, Work piece width min-max mm: 1.400, Min.-max. workpiece length in mm: 5.000, Min.-max. workpiece height in mm: 40/100, Year :1998

x-travel: 1250 mm y-travel: 650 mm z-travel: 600 mm total power requirement: kW weight of the machine ca.: t required space: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manufacturer: IMA, Type: BIMA 610-2H, Year: 1996, Control: num, Working range X: 7000, Working range Y-axis: ca. 1150, Working range Z: 200, C axis: no, Number of milling spindles vertical: 2, Tool adaption system: HSK 63, Milling engine 1 hours power: 7,5, rpm 1): 1800-24000, Milling engine 2 hours power: 7,5, rpm 2): 1800-24000, Tellerwechseler: yes, Number of tools per tool-magazine: 2 X 12, Mitfahrender Werkzeugwechsler: yes, raster table: yes, 4 station allocation: 8, Vacuum pumps m³/h: 250, Werkstückspannsystem: schablone, machine ready for demonstration: yes, Year :1996

Manufacturer: Biesse, Type: Arrow ATS BAZ 3, Year: 2003, Control: Biesse, Working range X: 3000, Working range Y-axis: 1500, C axis: no, Pendulum processing: yes, Number of milling spindles: 0, Number of tool changers: 1, Number of tools per tool-magazine: 8, Vertical drills-X: 20, Drill vertical Y: 15, Horizontal drills-X: 4, Drill horizontal Y: 2, Traverse table: yes, 2 station allocation: yes, Saw unit: yes, Year :2003

Manufacturer: SCM, Type: Record 130, Year: 2001, Control: Num, Working range X: 3080, Working range Y-axis: 1200, Working range Z: 280, Number of milling spindles: 1, Tool adaption system: HSK 63, Milling engine 1 hours power: ca.9, rpm 1): 9000-18000, Number of tool changers: 1, Number of tools per tool-magazine: 12, Mitfahrender Werkzeugwechsler: yes, Vacuum pumps m³/h: 120, Year :2001

Manufacturer: Hüllhorst Türenbearbeitung, Year: 1997, Control: Num 1060, Program: IMA, Machining stations: 2, 4 Achsensteuerung: yes, Working range X: 3000, Working range Y-axis: 1250, Working range Z: 250, Arbeitsbereich C: 360, Work piece width min-max mm: 400-1250, Work piece length min-max mm: 500-3000, Work piece thickness min-max mm: 10-60, Milling spindles horizontal: 1, Power kW 1: 4,5, RPM min-max 1: ca. 6000, Milling spindles vertical: 1, Power kW 2: 7,5, RPM min-max 2: 1500-18000, Inlet conveyor: Rollgang, Lock case moulding aggregate: 1, C axis: yes, Year :1997

Manufacturer: Homag, Type: Genius 20/50/14/G, Year: 1996, Control: Homatic, Work piece width min-max mm: 1400, Min.-max. workpiece length in mm: 5300, Min.-max. workpiece height in mm: 40 / 60, C axis: yes, Tool adaption system: HSK 63F, Milling engine 1 hours power: 12, rpm 1): 1500 - 18.000, Number of tool changers: 1, Number of tools per tool-magazine: 30, Vertical drills-X: 11, raster table: yes, 2 station allocation: yes, Saw unit: yes, Edgebanding unit: yes, Magazine for edges: 1-fach, Edgeband hight mm: 40, Marking laser: yes, Year :1996

Manufacturer: IMA , Type: BIMA 810 V, Year: 2000, Control: IMATRONIC, Software: IMAWOP, Working range X: 5200, Working range Y-axis: 1600, Working range Z: 180, C axis: yes, Pendulum processing: yes, Number of milling spindles vertical: 1, Tool adaption system: HSK 63, Milling engine 1 hours power: 12, Number of tool changers: 1, Number of tools per tool-magazine: 18, Vertical drills-X: 11, Drill vertical Y: 11, 2 station allocation: yes, 4 station allocation: yes, Vacuum pumps m³/h: 2 x 100 , Edgebanding unit: yes, Edgeband hight mm: 55, Year :2000