137,378 used machines on RESALE, but how to find them? Machine Search
CNC VERTICAL MACHINING CENTRE Inv. No. 13.212M1 Make KEARNEY & TRECKER MILWAUKEE Model MODU-LINE Control Siemens 840D Mach. No. 27897 Table size 1.879 x 1.016 mm X-travel (longitudinal) 1.830 mm Y-travel (cross) 762 mm Z-travel (vertical) 762 mm Workpiece weight 6.800 kg R.P.M. 4 – 2.400 HP 25 Volts 400 Cycles 50 Including: Automatic Tool Changer Built in rotary table Ø 813 mm Auction-ID: A1-50718-59
• Deckel Maho DMC 63V; Year: 2001; 8200 spindle hours; Very good condition, freshly checked and ready for shipment • DMG DMC 635 V ecoline; Year: 2013; approx. 2800 spindle hours; Very good condition immediately available • Mazak QT 200 MSY built in 2024; Spindle hours: approx. 500h
Manufacturer: SW Model No.: BA W04-22 Year: 2014 Condition: Used Stock number: 9603 Control system: Sinumerik 840D Solution Line Number of stacking positions: 2x36 Minimum spindle speed: 5000 1/min X-axis travel: 400 mm Y-axis travel: 500 mm Z-axis travel: 425 mm Cone: HSK 63 Number of Spindles: 2 Equipment: Chip conveyor Filtration Knoll Preparation for 5 axis
turning diameter: 470 mm turning length: 2500 mm control: Siemens Sinumerik 840 D work height max.: 1300 mm swing diameter over bed slide: 750 mm swing over bed: 780 mm diameter of quill: 160 mm taper bore: MK 5 tool numbers: 48 weight of tools max.: 15 kg tool length - max.: 500 mm total power requirement: 123 kVA weight of the machine ca.: 27 t dimensions of the machine ca.: 8,4 x 4,0 x 3,3 m C-axis: - Speed range 0.1 - 30 rpm - Max. torque at rotary spindle (60% duty cycle) 930 Nm - Positioning accuracy 0.005 degrees Slide travel: - X-axis 720 mm - Z-axis 4072 mm Rapid traverse: - X-axis 18 m/min - Z-axis 30 m/min Feed rates: - X-axis 0.1 - 18000 mm/min - Z-axis 0.1 - 30000 mm/min Workpiece spindle: - Spindle head according to DIN 55026: A 11 - Through bore: 123 mm - Diameter in front bearing: 200 mm - Oriented spindle stop: 0–359 degrees Workpiece spindle dr ...
BAZ DMG Deckel V75linear (ca.16000 spindle hours) BJ 2005
Self-centering chuck 3 jaws Rohm 400 mm Independent chuck 4 jaws Rohm 600 mm Running glasses 30-200 mm Fixed Seat with Rollers 40-215mm Fixed Glasses with Rollers 210-390 mm Sony digital readout 2 axis Multifix quick-change holder type D Fixed center Rotating center Pivot bus Manual & drawings German language Manual English Auction-ID: A1-47366-171
Maximum turning diameter above bed: 930 mm Maximum rotation diameter above cross slide: 630 mm Center distance: 5000 mm Spindle nose: Bayonet DIN 55027 K11 Spindle bore: 96 mm Spindle Speed: 8-800 (24) rpm Main drive: 22 kW Dimensions W x D: 2050 x 2200 mm Extras: Clamping plate 400 mm self-centering 3-jaw Clamping plate 800 mm independent 4-jaw Conical Turning Attachment Movable support 260 mm Fixed support with roller inserts 20-400 mm Fixed support with roller inserts 350-580 mm Sony digital readout 2-axis Tool holder Multifix D1 Tool holders 1 piece Cooling system Machine manual and drawings (German language) Auction-ID: A1-47366-175
Total length with entry table: 900cm. Auction-ID: A1-47366-9
X-axis: 260mm, Y-axis: 100mm (±50mm), Z1-/Z2-axis: 800/800mm, swing diameter over bed: 660mm, swing diameter over cross slide: 540mm, distance between spindle noses: 1050mm, max. turning diameter: 500mm, max. workpiece length: 1000mm, max. bar capacity: 65mm, spindle speed: 0-5,000rpm, torque: 25Nm, drive power: 6.7kW, number of driven tools: 12, number of tool stations: 12, shank diameter for boring bars: 40mm, tool change time: 0.7s, speed range of driven tools: 0-12,000rpm, torque of driven tools: 30Nm, drive power of driven tools: 10kW, compressed air connection: 6bar, connected load: 40kVA, control: Sinumerik 810D PCU20, length: 3320mm, width: 2070mm, height: 2341mm, total weight: 8.45t, operating hours: 89,129h, with documentation and service reports, regularly maintained. An on-site inspection is possible.
USED CENTERLESS MICROREX GRINDING MACHINE type 2H Wheel width: 200 mm Equipped with 1 Strip door for diving 1 Manual and automatic manual and automatic dripping work 1 Hydraulic diamond cutting Auction-ID: A1-50950-49
USED GIUSTINA TYPE 114/500 GRINDING MACHINE Year: 2004 Working Wheel Outer Diameter of Wheel: 610 mm Inner Diameter of Wheel: 305 mm Width of Wheel: 500 mm Check Wheel Outer Diameter of Wheel: 356 mm Inner Diameter of Wheel: 152.40 mm Width of Wheel: 500 mm Strokes Fast Diving Stroke: 3.6mm maxi Plunge working stroke: 1.5mm maxi Dimensions Weight of the machine: about 12,000 kg Equipped with 1 Magelis Telemecanique PLC 1 Marposs style diameter controller 1 Conveyor belt feeding system 1 Conveyor belt parts unloading system 2 Hydraulic diamond cutters with automatic dimension adjustment Dimensions and weight 4500x2200xH1500mm - weight 12000 kg Auction-ID: A1-50950-21
USED MICROREX CENTERLESS GRINDING MACHINE type 1H Wheel width: 100 mm Equipped with 1 Strip holder for diving 1 Manual and automatic manual and automatic dripping work 1 Hydraulic diamond cutting Auction-ID: A1-50950-48
USED GIUSTINA GRINDING MACHINE TYPE 114/500 Serial No.: 61 Year: 1983 Working wheel Outer diameter of the wheel: 610 mm Inner diameter of the wheel: 305 mm Width of the wheel: 500 mm Check wheel Outer diameter of the wheel: 356 mm Inner diameter of the wheel: 152.40 mm Width of the wheel: 500 mm Strokes Fast diving stroke: 3.6mm maxi Plunge working stroke: 1.5mm maxi Dimensions Weight of the machine: about 12,000 kg Equipped with 1 Magelis Telemecanique PLC 1 Marposs style diameter controller 1 Conveyor belt feeding system 1 Conveyor belt parts unloading system 2 Hydraulic diamond cutters with automatic dimension adjustment Dimensions and weight 4500x2200xH1500mm - weight 12000 kg Conditional disassembly cost: 500 € Auction-ID: A1-50950-20
USED KLEIN CENTER STITCH GRINDING MACHINE Max . length between tip: 1200 mm Dimensions and weight 1 Euro pallet weight 400 kg Auction-ID: A1-50950-35
USED GHIRINGHELLI GRINDING MACHINE TYPE M12SP610 CNC6A Serial No.: C691.04 Year: 2004 Working wheel Outer diameter of the grinding wheel: 610 mm Equipped with 1 SIEMENS SINUMERIK CN Number of CNC axes: 6 1 Gantry loading and unloading between the grinding wheels 1 Double control wheel carriage driven by 2 Bruschless motors 1 Bruschless motor on the spindle 2 CNC diamond cutters with dimension adjustment Dimensions and weight Machine:4000x2500xH2550mm - weight 8000kg - electrical cabinet: 1900x600xH2400mm - weight 450 kg - loader: 3000x2400xH2400mm - weight 1200 kg Auction-ID: A1-50950-17
USED GHIRINGHELLI GRINDING MACHINE TYPE M200 CNC4A Serial No.: C679.03 Year: 2003 Working wheel Outer diameter of the grinding wheel: 500 mm Equipped with 1 CN SIEMENS SINUMERIK Number of CNC axes: 4 1 Gantry loading and unloading between the grinding wheels 1 Double control wheel carriage driven by 2 Bruschless motors 1 Bruschless motor on the spindle control wheel2 CNC diamond cutters with dimension adjustment Dimensions and weight Machine:4000x2500xH2550mm - weight 8000kg - electrical cabinet: 1900x600xH2400mm - weight 450 kg - loader: 3000x2400xH2400mm - weight 1200 kg Auction-ID: A1-50950-18
USED GHIRINGHELLI GRINDING MACHINE TYPE M12SP610 CNC6A Serial No.: C759.07 Year: 2007 Working wheel Outer diameter of the grinding wheel: 610 mm Equipped with 1 CN SIEMENS SINUMERIK Number of CNC axes: 6 1 Gantry loading and unloading between the grinding wheels 1 Double control wheel carriage driven by 2 Bruschless motors 1 Bruschless motor on the spindle 2 CNC diamond cutters with dimension adjustment Dimensions and weight Machine:4000x2500xH2550mm - weight 8000kg - electrical cabinet: 1900x600xH2400mm - weight 450 kg - loader: 3000x2400xH2400mm - weight 1200 kg Auction-ID: A1-50950-15
USED CENTERLESS GRINDING MACHINE ROSSI 300 Serial No.: 4785 Wheel width: 100 mm Working wheel diameter: 300 mm Equipped with 2 Hydraulic diamond cutters 1 Strip holder for working in a row 1 Manual plunge Dimensions and weight Euro pallet 1200x800xH1600mm - weight 1200 kg Auction-ID: A1-50950-66
USED WEEREN DH 20II GA MACHINE (STRAIGHTENING, CENTERING, EXTERNAL TURNING AND CHAMFERING) FOR SHAFT AND TUBE END MACHINING Year : 2008 Capacity: max. diameter: 36 mm Machining length: 35 mm Workpiece length: minimum: 150 mm - max: 1150mm Equipped with 1 SIEMENS PLC 2 GUHRING machining heads Dimensions and weight Machine: 3900x1550xH1800mm - Container: 1550x500xH1000mm - 2 pallets weight 6500 kg Auction-ID: A1-50950-80
Used Centerless grinding machine LIDKOPING 46 Working wheel Ø Exterior: 508 mm Width: 610 mm Control wheel Ø Exterior: 330 mm Width: 610 mm Thread work Plunge work CNC motor 0.001 Equipped with 1 Control cabinet with PLC SIEMENS 1 CNC plunge on the working wheel 1 CNC motor on the control wheel1 External lubrication pump tray 2 Hydraulic diamond cutters 1 Batten holder for working in a row Dimensions and weight Machine: 3800x2100xH1600mm - Electrical cabinet: 1000x400xH1700mm - 1 pallet - total weight 8500 kg Auction-ID: A1-50950-37
USED GHIRINGHELLI GRINDING MACHINE TYPE M12SP610 CNC6A Serial No.: C733.06 Year: 2006 Working wheel Outer diameter of the grinding wheel: 610 mm Equipped with 1 SIEMENS SINUMERIK CN Number of CNC axes: 6 1 Gantry loading and unloading between the grinding wheels 1 Double control wheel carriage driven by 2 Bruschless motors 1 Bruschless motor on the spindle 2 CNC diamond cutters with dimension adjustment Dimensions and weight Machine:4000x2500xH2550mm - weight 8000kg - electrical cabinet: 1900x600xH2400mm - weight 450 kg - loader: 3000x2400xH2400mm - weight 1200 kg Auction-ID: A1-50950-16
Max. tool weight 10 kg Max. tool length 400 mm Max. tool diameter 160 mm Max. workpiece size lxwxh 85 mm Tool magazine with 80 pcs. Spindle taper HSK63 Spindle speed 15,000 rpm Torque max. 350 Nm Axles 4 Rapid traverse 40 m/min Internal cooling 50 bar Number of pallets 2 Max. pallet load 500 kg Pallet size (lxw) 500 x 500 mm Pallet change time 9 s Machine width 4000 mm Machine height 3300 mm Machine weight approx. 15 t Auction-ID: A1-50373-17
Max. tool weight 10 kg Max. tool length 350 mm Max. tool diameter 80 mm Tool holder HSK-A63 according to DIN 69893 Number of tool positions in the magazine 60 Spindle speeds - infinitely variable 50-10,000 rpm Number of pallets 2 Max. pallet load 400 kg Pallet size (lxw) 500 x 400 mm Pallet change time 8/5 s Coolant tank 1100 l Machine length 5800 mm Machine width 4800 mm Machine weight approx. 12.8 t Spindle power 24 / 37 kW Auction-ID: A1-50373-18
turning diameter: 820 mm turning length: 3000 mm control: Siemens 840 D workpiece weight: 2,5 t drive of main spindle: 77 kW spindle nose: A15 spindle bore: 160 mm Workpiece head (C-axis): 0,005 grad max. torque on the working spindle: 2500 Nm main spindle speeds:: 0-2.430 U/min feeds z-axis: 0,1-18.000 mm/min rapid traverse Z-axis: 18 m/min feeds x-axis: 0,1-30.000 mm/min rapid traverse X-axis: 30 m/min steady: 50-350 Spannbereich tailstock - quill dia: 180 mm tailstock - travel of quill: 170 mm y-axis: -100/+150 mm rapid traverse y-axis: 12.000 mm/min b-axis: -105/+95 Grad milling spindle - taper: HSK100 milling spindle motor: 43 kW milling head speed: 1-5.500 U/min max. torque on the milling spindle: 336 Nm tool changer: 96 Plätze weight of tools max.: 15 kg chip conveyor: kW total power requirement: 166 KVA weight of the machine ca.: 40 t dimensions of the machine ca.: 112x4,4x3,85 ...
multitasking turning center, year 2003, CNC MSC 501. Used machine. More info & price on IndustrialBuyer.
multitasking turning center, year 2007, CNC NT425GCO188. Used machine. More info & price on IndustrialBuyer.
Key data: 560 mm, 560 mm, 600 mm
Manufacturer: Makino Model No.: A51 Year: 2006 Condition: Used Stock number: 9612 Work table length: 400 mm Work table width: 400 mm Maximum spindle speed: 12000 1/min X-axis travel: 560 mm Y-axis travel: 560 mm Z-axis travel: 600 mm Number of Stacking Positions: 134 pieces Machine weight: 7804 kg
Key data: 915 mm, 6000 mm
1 turning and milling center Make: Mazak Model: Integrex 650 H Year of Make: 2004 CNC control. Mazatrol 640 NT-Pro Turning diameter: 915 mm Turning length: 6000 mm Equipment / Accessories: Drill rods Tool measuring device Tool Changer 2 automatic setting sticks diameter 190 – 350 mm 1 automatic setting stick diameter 50 – 268 mm 1 manual setting stick diameter 400 - 610 mm 1 three-jaw chuck diameter 630 mm Cooling lubrication system Coolant tank 1150 l Coolant pump 70 bar otherwise according to the technical data in the appendix. Machine has been regularly serviced and is in very good condition.
x-travel: mm y-travel: mm z-travel: mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 1020 mm y-travel: 700 mm z-travel: 500 mm control: Heidenhain iTNC530 total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 1060 mm y-travel: 520 mm z-travel: 610 mm control: Siemens total power requirement: kW weight of the machine ca.: 5900 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 1600 mm y-travel: 820 mm z-travel: 700 mm control: Heidenhain iTNC530 total power requirement: kW weight of the machine ca.: 7500 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 750 mm y-travel: 600 mm z-travel: 520 mm control: DMG Ergoline total power requirement: kW weight of the machine ca.: 9500 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter: 275 mm turning length: 900 mm control: TRAUB TX8i Main- opposite spindle: spindle passage: 65 mm power capacity at 100 % load: 25,20 kW power capacity at 40 % load: 30,20 KW max. torque at 40% / 100% load: 180 / 135 Nm spindle turning speed - stepless: 1 - 5.000 U/min spindle diameter in front bearing: 110 mm C-axis: 1 - 500 U/min worktool support: No. 1 x-axis: 290 mm y-axis: 165 mm z-axis: 600/950 mm B - axis: 360 ° rapid traverse X/Y/Z: 18 / 18 / 30 m/min feed capacity X/Y/Z: 10 / 10 / 7 kN number of tools: 2x2 + 2x2 number of driven tools: 2x2 + 2x2 mm toolpiece turning speed range: 8.000 / 2.000 U/min power capacity at 25 % load: 5,80 kW max. torque at 25% load: 4x18,6 / 4x74 Nm tool taper: TRAUB Ø60 worktool support: No.2 / No.3 / No.4 x-axis: 170 mm z-axis: 600/950 mm y-axis: +/- 60 mm rapid traverse X/Y/Z: 18 / 15 / 30 m/min feed capacity X/Y/Z: 10 / 10 / 7 k ...
turning diameter: 210 mm turning length: 700 mm control: Okuma OSP-E 100 L total power requirement: 35,7 kVA weight of the machine ca.: 7,1 t dimensions of the machine ca.: 2660 x 2000 x 2330 mm CNC turning and milling center with C-axis and Y-axis, 2 turrets, and subspindle. CNC control: Okuma OSP-E 100 L Maximum turning diameter: 210 mm Swing over bed: 400 mm Distance between spindle noses: 960 mm Main spindle: Spindle bore: 53 mm Speed range: 50 to 6000 rpm Motor power: 11/7.5 kW Subspindle: Spindle nose: JIS A2-6 Speed range: 38 to 5000 rpm Motor power: 11/7.5 kW Z-axis: Travel: 700 / 700 mm (ZA + ZB) Rapid traverse: 40000 mm/min W-axis: Travel: 940 mm Rapid traverse: 40000 mm/min X-axis: Travel: 167 / 192 mm (XA + XB) Rapid traverse: 30000 mm/min Y-axis: Travel: 92 mm (+50/-42 mm) Rapid traverse: 15000 mm/min C-axis: Indexing: 360 x 0.001 deg. Rapid traverse: 400 rpm Disc turret: 2 ...
x-travel: 650 mm y-travel: 650 mm z-travel: 680 mm rotary table tiltable: 360 Grad Number of working hours: 55.000 h tool taper: HSK 63 spindle turning speed range: 20.000 U/min max. torque on the spindle: 85 table-size: 400 x 500 mm table load: 0,5 t 4-axis machine Chain-type tool magazine: 60 positions Chip conveyor Pallet changer Coolant filtration system High-pressure coolant through the spindle The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Key data: 640 mm, 640 mm, 640 mm
Vertical machining center Travel x/ y/ z = 640/640/640 mm Work table 850 x 600 mm Rapid traverse x/y/z 70/ 40/ 40 m/min Spindle speed up to 12,000 1/min Motor power 40/100 % 19/ 13 KW Torque 40/100 % 100/ 70 Nm Tool magazine 30-fold Tool holder SK 40 - Coolant system - Chip conveyors - Internal coolant supply - CNC control Heidenhain iTNC530
Dinkel DTAJ 20000 extendable center axle trailer – 2006 – 20 tons – NL registration Specifications: Brand: Dinkel Type: DTAJ 20000 Year of construction: 2006 Date of first admission: 09-05-2006 Chassis number: W09799210D17079 Version: centre axle trailer / extendable rocker Body: open cargo floor Number of axles: 2 Tare weight: 6.380 kg Payload: 13,620 kg Maximum permissible weight: 20,000 kg Maximum axle load: 10,000 kg per axle Total length according to registration: approx. 10,100–12,100 mm Length of load floor retracted: approx. 8,550 mm Width: approx. 2,550 mm Floor height: approx. 900 mm Towing eye: 50 mm Features: Extendable open loading floor Rear can be extended approx. 1,750 mm Low floor construction for transporting machines and equipment Tandem axle Air suspension WABCO Trailer EBS Air brake system Steel chassis construction Checker pl ...
HAAS VF-2SS CNC vertical machining center was built in 2013 in the United States by HAAS AUTOMATION, INC. The machine is designed for the automatic machining of metal workpieces weighing up to 680 kg. It performs such operations as precision milling, threading and drilling. Its wide machining capabilities, combined with proven components, make it an excellent choice for the production of repeatable parts used in many industries. The HAAS VF-2SS is equipped with a spindle with Inline Direct-Drive drive, reaching a maximum speed of 12000 rpm. It cooperates with a 31-position tool magazine that automatically changes tools according to the machining program. Machining is performed in three axes, X, Y and Z, with feed ranges of 762 mm, 406 mm and 508 mm respectively. The worktable with T-slots allows for the quick clamping of the tooling and workpieces. The machine’s rigid design ensures ...
HAAS VF-4SS CNC vertical machining center was built in 2012 in the United States by HAAS AUTOMATION, INC. The machine is designed for the automatic machining of metal workpieces weighing up to 794 kg. It performs such operations as precision milling, threading and drilling. Its wide machining capabilities, combined with proven components, make it an excellent choice for the production of repeatable parts used in many industries. The HAAS VF-4SS is equipped with a efficient spindle reaching a maximum speed of 12000 rpm. It cooperates with a 31-position tool magazine that automatically changes tools according to the machining program. Machining is performed in three axes, X, Y and Z, with feed ranges of 1270 mm, 508 mm and 635 mm respectively. The worktable with T-slots allows for quick clamping of the tooling and workpieces. The machine’s rigid design ensures stable operation even du ...
\" WEEKE Optimat BHC 250 CNC Processing Centre Manufacturer: WEEKE Bohrsysteme GmbH / HOMAG Group Model: Optimat BHC 250 Machine type: CNC Processing / Machining Centre Year: 2004 Serial number: 0-250-04-2244 Quantity: 1 machine CNC machining centre designed for drilling, routing/milling and grooving of wood and wood-based panel materials. Equipped with movable vacuum consoles, vacuum workpiece clamping, integrated drilling/routing equipment and original WEEKE PC/CNC control system. Technical specifications: Connected load: 15 kW Electrical supply: 400 V, 50 Hz, 3+N Rated current: 35 A Control voltage: 24 V Working length: Approx. 2,750 mm configuration X-axis travel: Approx. 3,185 mm Y-axis travel: Approx. 1,080 mm Z-axis travel: 135 mm Pneumatic requirement: 7 bar Equipment / features: CNC drilling and routing/milling Integrated machining head Movable ...
With two machining modules, X-axis: -50 to 725mm, Y-axis: -200 to 300 / -250 to 250mm, rapid traverse X-, Y-, Z-axis: 18/12/30m/min, control: Siemens Sinumerik, temperature range: 5–40°C, power type/frequency: 3 PEN / 50Hz, rated voltage: AC 400V, control voltage: DC 24V, auxiliary voltage: AC 230V, connected load: 102kVA, rated current: 148A, rated current (fast): 148A, fuse (slow): 160A, length: 8000mm, width: 3000mm, height: 4000mm, weight: approx. 17t, operating hours: approx. 80,000h. The machine is fully functional, the ball screw drive (recirculating spindle) of the Z-axis was renewed in 2024 and it has been regularly maintained. Comes with documentation, control cabinet, hydraulic unit, filter elements, and chip conveyor. An on-site inspection is possible.
turning diameter:120 mm turning length:100 mm control:Fanuc Spindle 1 power:7,5 kW Spindle 1 RPM:4500 1/min Spindle 2 power:7,5 kW Spindle 2 RPM:4500 1/min Distance between spindle noses:600 mm Turret No.1 stations / rotary tools:15/15 Power rotary tools turret 1:2,7 kW RPM of rotary tools turret 1:4000 1/min Turret No.2 stations / rotary tools:15/15 Power rotary tools turret 2:2,7 kW RPM of rotary tools turret 2:4000 1/min Travel x/z turret 1:250 / 300 mm Travel x/z turret 2:250 / 920 mm Bar capacity spindle 1:51 mm Bar capacity spindle 2:51 mm power chuck:165 mm Spindle bore sp. 1:62 mm Spindle bore sp. 2:62 mm dimensions of the machine ca.:3700 x 2300 x 3000 mm weight of the machine ca.:5600 kg Used CNC-2-spindle CNC turning and milling center with gantry loader - 2x 15 station turret -automatic gantry loader with turnaround station. 14 station-magazin right side Max. Parts size Ø 12 ...
turning diameter:370 mm turning length:200 mm Spindle 1 RPM:4000 1/min control:Siemens 840 D Spindle 2 RPM:4000 1/min power capacity:L / R 18/24 kW max. torque on the spindle:630 nM C-Axis:0,001° Turret No.1 stations / rotary tools:12/12 VDI 40 Turret No.2 stations / rotary tools:12/12 VDI 40 turning speed range - milling:3000 1/min power capacity - milling spindle:8,8 kW torque rotary tools:28 Nm Bar capacity spindle 1:85 mm total power requirement:65 kVA weight of the machine ca.:13 t dimensions of the machine ca.:5,7x2,4x2,1 m Travel x1:260 mm Travel x2:260 mm Travel Y1:600 mm Travel y2:600 mm Power Chuck:2 x 250 mm manual tool eye:l & r High performance 6-axis subspindle CNC-Lathe with twin turren and rotating tools.
standard turning dia.:200 turning length:max. 810 mm control:MSX-701 MAPPS IV greates pass round over bed:800 mm Max. distance between centres:1130 mm max. turning diameter:320 mm max. workpiecediameter:300 mm bar material dia.:65 mm Traverse X-Axis 1:210 Traverse X-Axis 2:210 mm Traverse X-Axis 3:210 mm Traverse Y-Axis 1:110 (+65/-45) mm Traverse Y-Axis 2:110 (+45,/-65) mm Traverse Z-Axis 1:300 mm Traverse Z-Axis 3:300 mm Traverse Z-Axis 2:810 mm Traverse B-Axis:870 mm turning speed range - spindle:5.000 1/min Number of spindle speed ranges:2 . spindle nose:JIS A2-6 spindle bore:73 mm spindle bearing diameter:120 mm C-Axis:0,001 ° turning speed range - spindle:5.000 1/min spindle nose:JIS A2-6 spindle bore:73 mm bar material dia. max:65/52 mm spindle bearing diameter:120 mm C-Axis:0,001 ° Number of Turrets:3 . Number of tool stations:16 x 3=48 pos Schank height for square tool:20 mm D ...
turning diameter:640 / 400 mm turning length:1500 mm control:Siemens 840 D Powerline Travel turret No.1 (milling spindle) x/y/z:550 / 180 (±90) / 1585 mm Swivle angle milling spindle (B-axis):±120° interpol. ° Rapid traverse feeds turret 1 (milling head) x/y/z:40/24/60 m/min RPM milling spindle:12000 1/min power capacity - milling spindle:12 / 23 kW Torque of milling spindle:100 Nm Tool magazine for milling spindle (turret 1):120 HSK-A 63 Tool change time tool/tool, milling spindle:1,6 s Spindle 1 RPM:4000 1/min Spindle 1 power:36/ 45 kW Spindle 1 Torque:730 Nm Spindle 1 max. bar diameter:90 Spindle 2 RPM:4000 1/min Spindle 2 power:36 / 45 kW Spindle 2 torque:730 Nm Spindle 2 max. bar diameter:90 c-axis:0,001 ° Travel turret 2 x:225 mm Travel Turret 2 z:1595 mm RPM of rotary tools turret 2:4000 1/min no. of tools in turret 2:12 VDI 40 high-pressure pump:20 bar total power requiremen ...
turning diameter:500 mm turning length:1000 mm control:Siemens 840 D spindle:42 / 28 kW spindle turning speed - stepless:31 - 4000 1/min max. torque on the spindle:345 Nm c-axis:360000 x 0,001° feeds -stepless-:0 - 10000 mm/min rapid traverse:10000 mm/min turret stations / rotary tool stations:12/12 VDI 40 RPM of rotary tools:2000 1/min diameter of quill:90 mm quill stroke:80 mm tailstock quill taper ISO:SK 30 Tailstock Travel:600 mm Power rotary tools:3,5 kW :22,5 Nm Rotary tool holders:4 ax./ 4 rad. spindle passage:66 mm total power requirement:30 kW weight of the machine ca.:7,5 t dimensions of the machine ca.:8x 3 x 4 m
maximum number of results exceeded
please refine your search
5.000 € 
