machining center vertical used for sale

COLCHESTER TORNADO 110 CNC turning center was built in England in 1998. The machine, designed for precision machining of workpieces with a maximum diameter of 420 mm, features a fully illuminated work space that includes among others a 12-position turret and an extremely powerful spindle. The inclined bed by 60° ensures excellent stability of the process, during even the most intense challenges. On top of this, the intuitive GE FANUC Series 21i-T CNC control allows advanced machining programmes to be created in just a few steps. The TORNADO 110 CNC lathe weighs 2400 kg. Technical specifications of the COLCHESTER TORNADO 110 metal lathe - CNC controller: GE FANUC Series 21i-T - feed in the X/Z axis: 310/416 mm - rapid traverse in the X/Z axis: 15/20 m/min - load on the X/Z axis: 2.51/3.77 kN - turning diameter over bed: 420 mm - turning diameter over slide: 280 mm - maximum tur ...

Inv. Num. : 7911 Type: FZ 12 WM Producer: Chiron Created: 2011 Parameters: Control system: Fanuc Series 21iM Switch-on hours: 94645 h Hours: 45953 h Work table length: 850 mm Work table width: 350 mm X-axis travel: 550 mm Y-axis travel: 300 mm Z-axis travel: 425 mm Machine height: 2600 mm Machine length: 2800 mm Machine width: 1800 mm Equipment: Grips

COLCHESTER TORNADO 100 CNC turning center built in 1995 in England is used for precision machining of workpieces with a maximum diameter of 420 mm. The machine features a large, fully illuminated workspace with a 12-position turret and an extremely powerful spindle. The 60° inclined bed ensures remarkable process stability, even during the most intense challenges. This is completed by the intuitive CNC control in which all machining programmes are created in just a few steps. The TORNADO 100 CNC lathe weighs 2400 kg. Technical specifications of the COLCHESTER TORNADO 100 metal lathe - CNC controller - HMI panel: VILUX - feed in the X/Z axis: 180/350 mm - rapid traverse in the X/Z axis: 10/15 m/min - turning diameter over bed: 420 mm - turning diameter over slide: 297 mm - maximum turning diameter: 186 mm - maximum turning length: 350 mm - maximum spindle rotational speed: 60 ...

FADAL VMC 3016 CNC machining center, built in 1994 in the United States is used for precision machining of workpieces with a maximum weight of 453 kg. The machine, distinguished by its extensive machining capabilities and high productivity, has a large, fully illuminated workspace with a powerful spindle and a 21-position tool magazine. The movement of the X, Y and Z axes along precise guideways results in excellent dynamic and repeatable feed rates. This is completed by an intuitive CNC control with many useful functions, in which machining programmes are created in just a few steps. The VMC 3016 CNC vertical machining center weights 3765 kg. Technical specifications of the FADAL VMC 3016 CNC milling machine - CNC controller: FADAL CNC 32MP - feed in the X/Y/Z axis: 760/400/500 mm - rapid traverse in the X,Y axis: 18 m/min - rapid traverse in Z axis: 15 m/min - cutting speed in  ...

FADAL VMC 2016L CNC machining center was built in 1997 in the United States. The machine, designed for precision machining of workpieces, has a large, fully illuminated work area, with automatic tool changer (ATC) and a reliable spindle. Excellent dynamics and feed repeatability are ensured by precision guideways along which the X,Y,Z axes are guided. All this is complemented by the intuitive CNC control where machining programmes are created in just a few steps. All this makes the VMC 2016L CNC vertical machining center the perfect solution for any production facility. Technical specifications of the FADAL VMC 2016L CNC milling machine - CNC controller: FADAL CNC 32MP - feed in the X/Y/Z axis: 500/400/700 mm - work table dimensions (L x W): 750 x 410 mm - number of T-slots: 3 - maximum spindle rotational speed: 7500 rpm - automatic tool changer (ATC) - maximum tool diameter: 7 ...

OKK VM5-II CNC machining center built in 2002 in Japan, is used for precision machining of workpieces. The machine features a large workspace, which includes among others a 30-position tool magazine and a reliable spindle, operating at a maximum speed of 8000 rpm. The design, made from high-quality raw materials, ensures exceptional rigidity and stability, even during the most intensive challenges. The OKK VM5-2 CNC vertical machining center weighs 6806 kg. Technical specifications of the OKK VM5-II CNC milling machine - CNC controller: FANUC Series 16i-M - feed in X/Y/Z axis: 1020/510/510 mm - work table dimensions (L x W): 1049 x 561 mm - maximum spindle rotational speed: 8000 rpm - 30-position tool magazine - tool holder: BT 40 - number of T-slots: 5 - installed power: 47 kVA - power supply: 3x 380 V; 50 Hz - dimensions (L x W x H): 3330 x 2830 x 3000 mm - weight of mach ...

4-axis machining centre with 8-fold tool changer for aluminium or PVC profiles Max. machining length: 6,400 mm Y-axis travel: 850 mm Travel Z-axis: 650 mm Swivel angle A-axis: 0° - 180° Max. Speed 21,000 rpm Windows operating system Minimum quantity spraying Tensioner detection and automatic displacement Chip conveyor belt in bed Steam extraction Pendulum operation through two light barrier areas Loading is included in the price Weight: approx. 4,500 kg

Rated voltage: 400V, phases: 3, frequency: 50Hz, max. power consumption: 57.9kVA, total current consumption: approx. 83.8A, max. motor current consumption: 94A, current interruption at: 10kA, connected load: 47.8kVA, control: Okuma OSP-U100L, an on-site inspection is possible.

turning diameter: 250 mm turning length: mm control: Siemens 840D 0 total power requirement: 25 KVA kW weight of the machine ca.: 4 t required space: 5.5 x 2.5 x 2.5 m m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 3000 mm y-travel: 800 mm z-travel: 1100 mm total power requirement: kW weight of the machine ca.: 15 t required space: 4x6x3.5 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 1000 mm y-travel: 1100 mm z-travel: 750 mm total power requirement: 71 kW weight of the machine ca.: t required space: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Control Siemens Bar passage 32 mm 2 x 12-speed revolver with attached revolver Competition. Main / sub-spindle Y-axis turret top Parts pick-up device Conveyor IRCO Bar Loading Magazine

A center lathe with 2-axis digital readout is offered. Tool holder, coolant supply and transparent guard. Inspection possible by prior arrangement.

Centerless grinding machine manufactured in 2003. This KOYO 4515C features two available units, both equipped with FANUC LR Mate 200iD/7L loading robots and FANUC SR-6iA unloading robots. The first unit has 86,000 operating hours, while the second has 92,000 operating hours. If you are looking to get high-quality grinding capabilities, consider the KOYO 4515C machine we have for sale. Contact us for further details.

Key data: 750 mm, 750 mm, 725 mm

GENERAL Project No.: 905674 Quantity: 1 pcs. Manufacturer: HECKERT (STARRAG) Type: HEC 500 D Control: Siemens 840 D solutionline Year of Make: 2011 Condition: Used machine Layers approx.: 2-3 layers DESCRIPTION MILL Travel in X 750 mm Travel in Y 750 mm Travel in Z 725 mm Max. rapid traverse speed in X/Y/Z 100/100/100 m/min Max. acceleration in X/Y/Z 11/14/11 m/s2 Tool holder HSK 63 Max. speed milling spindle 15000 1/min Max. power at ED 10-40/100% 31/– kW Max. torque at ED 10-40/100% 200/– Nm Spindle diameter in the front bearing 75 mm 1 pc. horizontally arranged milling spindle/s Torque support for multi-spindle drill heads Tool magazine 60 stations Max. tool diameter 160 mm Max. tool length 400 mm Max. tool weight 10 kg Chip to chip time 2.7 s Rotary pallet changer 2-fold Pallet size 500×630 mm Max. workpiece weight per pallet 600 kg Rotary  ...

Number of axes: 5 Feed speeds in the X/Y/Z axis: 500/420/380 mm Feed rates in the C/B axes: 180°/360° Dimensions of the work table (L x W): 500 x 380 mm Maximum workpiece weight: 350 kg Spindle power: 15 kW Maximum spindle speed: 18000 rpm Tool magazine capacity: 30 pcs. Overall dimensions (L x W x H): 3360 x 2550 x 2600 mm Total weight of the DMU 50 eVolution machine: 6000 kg

x-travel: 350 mm y-travel: 240 mm Ucblcnl2H9 z-travel: 340 mm Speed: 20 - 4,500 1/min Table: D 400 x 280 Control: 810 D Shop mill SIEMENS Tool holder: SK 40 Rapid traverse: 5 m/min Spindle: 6.3 / 10 kW Total connected load: 15 kVA Approx. space requirement: 1.7 x 1.55 x 2.1 m Universal CNC Milling Machine, Rotary swivel table manual with angle display on the screen, El. Handwheel

Key data: 1120 mm, 510 mm, 510 mm

For sale. Mazak vertical machining center type VTC-20B with Kitagwa integrated rotary axis. X-, Y- and Z-axis travels are 1,120 x 510 x 510 mm. Table size: 1410 x 510mm. Table capacity: 800Kg. Maximum speed is 6,000 rpm. SK-40 spindle holder. The number of tool positions is 24 pieces ATC, max. tool Ø / max. tool Ø 80 mm ditto for free places / max. tool Ø with free places besides 110 mm max. tool length 350 mm max. tool weight 8 kg Feed range xy / feed range xy 1-8000 mm/min. Vorschubbereich z / feed range z 1-8000 Mm/min. Rapid traverse X/Y / rapid feed X/Y 30 m/min. Drive power / drive capacity 15 kW Weight of the machine approx. / weight 6500 kg

Two CNC turning centers Hitachi Seiki HITEC-TURN 20SII are available, control: Seiki MULTI, weight: approx. 4.3t, an on-site inspection is possible.

Key data: 65 mm, 510 mm

12-8 position driven turrets - Y axis +/- 40 mm - with Lns Quick Load short barfeed - well tooled - fanuc 18i-TA Control

DMG MORI CMX 1100 V CNC machining center was built in 2019 in Japan by DMG MORI CO.,LTD. The machine, designed for machining workpieces with a maximum weight of 1000 kg, is distinguished by the use of state-of-the-art components and technical solutions which guarantee excellent machining results for many years of continuous operation. The machining process is performed inside a fully illuminated workspace by means of reliable components in the form of cutting tools and a high-speed spindle. The ‘C’ shaped cast iron bed perfectly dampens any vibrations and oscillations generated during machining, while ensuring the highest possible process stability. The CMX 1100 V CNC vertical machining center on offer also has a wide range of optional equipment, consisting of, among others, measuring probes from the renowned RENISHAW brand, a divider and the advanced MAPPS FANUC CNC control. Over ...

Technical data and equipment: Travel X/Z - X2/Z2: 270/750 // 205/750 mm Travel Y: 100 (+-50) mm Max. rod diameter: 65 mm Main spindle drive: 0 - 5000 rpm Sub-spindle drive: 0 - 7000 rpm Tool holder: VDI 30 Control: Siemens Sinumerik 840 PL Revolver: 2 pcs. for applied Tools (12 slots each) Turret: Upper turret is equipped with Y-axis Spindle: 2 pcs main and counter spindle with C-axis Accessories for the machine: - Bar feeder Irco Profimat 70.6/270.6 - Internal cooling - Driven tools (straight and angled) - Chuck for main and counter spindle -Suction -Conveyor - Pick-up device with outfeed conveyor - KSS system Knoll SF 1000/Turbo-1 - Various holders approx. 80 pcs VDI 30 - Drill rod holder - Muzzle holder Machine space requirements: 3400 x 2600 x 2300 mm // 7600 kg

Key data: 2 mm, 810 mm, 700 mm

General Manufacturer: Spinner Type: MVC1600-B Year of Make: 2006 Switch-on hours: 30,240 h Control: Siemens 810D ShopMill Travels: X 1,600 mm Y 810 mm Z 700 mm Spindle Speed: 6,000 rpm Power: 25 kW Tool holder: SK50 Tool Changer Number of stations: 24-fold with double arm Condition Condition: Used Functional: Tested and fully functional Other equipment and accessories included: Conveyor Blow-out device for spindle High-pressure system IKZ 26 bar Preparation 4th axis Preparation of workpiece probes

DAEWOO PUMA 300 LB (Doosan), 2-axis CNC lathe, CNC Fanuc 18T, Hydraulic tailstock, Condition: very good. This machine can be inspected in our warehouse, under power., Mimu machine tools Italy

CNC Lathe - twin turret - subspindle Y axis NAKAMURA WT 250 CNC Fanuc, Series 16i-T, Spindle - sub spindle 1 turret live tools + Y axis 1 turret live tools (lower), 2x C-Axis, Swarf conveyor, IEMCA TS560P Bar loader Under power in our in our warehouse in Gussago BS. Mimu machine tools Italy

Centering vise PAGUS jaw height: 50 mm span: 0...95 mm on table with graduation 360° rotatable Dimensions: 330 x 255 x 160 mm

Sheet metal centering pull-down unit GENUSTECH PM4I2V395MEMB50C-287 flange diameter: Ø 56 / 72 mm Sensor unit: SENSTRONIC A1202R6K700111 10 - 55 V DC approx. 0.2 m Connection cable New ! Dimensions: 210 x 80 x 90 mm

Centering disc, tube clamp PAGUS Ø 300 - 340 mm used, tested ! Dimensions: 340 x 340 x 50 mm

Spindle with centering tip, clamping device PAGUS clamping range: 145 mm base plate 215 x 100 mm shaft diameter: Ø 40 mm Handwheel diameter: Ø 250 mm Dimensions: 600 x 250 x 250 mm

Centering tip, lathe tip WMW ZN 206 ( ZN206 ) Ø 140 mm MK 6 used, tested ! Dimensions: 380 x 140 x 140 mm

Centering Vise, Centric Clamp PAGUS Jaw Width: 100 mm Jaw Height: 55 mm Wingspan e: 0...70 mm can be rotated on carriage with millimeter scale - 70 - + 70 mm on a rotary table with graduation: - 90° - + 90° 360° rotatable ! used, tested ! Dimensions: 270 x 270 x 140 mm

Centering vise, centrifugal clamp PAGUS jaw width: 200 mm jaw height: 50 mm span: 0...200 mm on rotary table with graduation 360° rotatable used, tested ! Dimensions: 500 x 300 x 180 mm

2002 Deckel Maho DMU 50T still in use, can be viewed Find more here - .ucymachines/ Contact us at - sales@ucymachines

x-travel: 1250 mm mm y-travel: 1000 mm mm z-travel: 600 mm mm Control: total power requirement: 25 Kw kW weight of the machine ca.: t dimensions of the machine ca.: m Brand Tos Machine no F641 Type SPEEDtec CNC Brand Siemens CNC Type Sinumerik 840D Year of make 2009 X 1.250 mm Y 1.000 mm Z 600 mm Intake HSK 100 Engine power 25 kW Speed 12000 RPM Tool changer Number of pallets 4 Outgoing ram Including manuals Speed maximum 12.000 RPM Maximum pallet load 4.000 kg Chip transport Tool magazine positions: 2x 40 , HSK 100 4 tables, 1x 1.000 x 1.250mm / 3x 1.000 x 1.000mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Grinding wheel dimensions: 455x305x229.6mm, grinding diameter: 2-50mm, length: 2,450mm, width: 2,100mm, height: 1,600mm, weight: 3.7t, operating hours: unknown, including documentation, tooling package and clamping devices, out of operation since 2023. On-site inspection is possible.

Control Siemens Sinumerik 840D Bar passage 65 mm Speeds 5,000 min-1 2 x 12-speed revolver with attached revolver Competition. Turret 1 with Y-axis Parts collection facility Belt filter system Conveyor Bar loading magazine IRCO Profimat

Auction-ID: A1-47394-283

bar material dia.: 75 mm max. max. swing dia.: 540 mm turning length: 650 mm control: FANUC Oi-TB machine weight ab.: 6.200 kg CNC Turning- and Milling Center | JOHNFORD - SL-50-CF-Y equipped with chip conveyor. Additional equipment: + C axis + Y axis + driven tools The machine is in good condition. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: SL 50 | SL50 | SL-50 CF Y | SL50 CF Y The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: max. 420 mm turning length: 1250 mm control: INDEX, C 200-4 D swing diameter: 630 mm travel x1: 320 mm travel z1: 1250 mm travel x2: 170 mm travel z2: 1250 mm travel x3: 320 mm travel z3: 1250 mm main spindle speed: max. 3000 U/min main spindle drive: 53 kW spindle passage: 102 mm spindle head: DIN 55026 Gr. 11 max. torque on the spindle: 675 Nm sub spindle - spindle speed range: max. 3000 U/min sub spindle drive: 53 kW sub spindle - spindle passage: 102 sub spindle - spindle head: DIN 55026 Gr. 11 sub spindle - spindle torque: 675 Nm travel sub spindle: 1250 mm feed power: X1 14000/Z1 14000 N rapid traverse: X1 20/Z1 40 m/min feed power: X2 8600/Z2 14000 N rapid traverse: X2 20/Z2 40 m/min feed power: X3 14000/Z3 14000 N rapid traverse: X3 20/Z3 40 m/min numbers of turret head positions: Rev. 1 = 12 numbers of turret head positions: Rev. 2 = 10 numbers of turret head p ...

FZWD 160x1600/1 Sabo Basis 160 Facing & Centering Machine WMW HECKERT Workpiece dia 20-160 mm Length 130-1600 mm Max. Diameter of Milling Cutter 200 mm Facing Spindle's Speeds 112-280 rpm Spindle's Speeds 560-1400 rpm Adjustable feed rate range 15 – 800 mm / min. Spindle ISO 50 Rapid traverse 6000 mm Max. stroke 230 mm Max. Depth of 6 mm Tool holder 4 - 20 mm Max. Feed path 60 mm Total connected load 20 kW Weight 4.5 t

x-travel: 1500 mm y-travel: 800 mm z-travel: 700 mm table surface area: 1760 x 700 mm spindle taper: SK 40 spindle turning speed - stepless: 8000 U/min spindle drive: 15 kW feeds: 1 - 8000 mm/min rapid traverse X/Y/Z axis: 15 / 15 / 12 m/min table load: max. 2500 kg spindle throat: 760 mm ATC: 40 Pos control: HEIDENHAIN, TNC 530 total power requirement: kW weight of the machine ca.: 12,5 t dimensions of machine L x W x H: 4,23 x 2,98 x 2,74 m - with coolant through spindle Accessories: NC-dividing unit (=4th Axis) with tailstock, center height 250 mm, 2 hydr. vices make HILMA, model NC 160, width of jaws 160 mm, various tool holders, chip conveyor, coolant - geometrical overhauled in 2022 - - new ball bearing spindle installed on Y-axis in NOV. 2022 - - the magnetic plates shown on the photo are not included - The data for this ad was created with ModulMWS - the software so ...

Centerless grinding machine manufactured in 2004. This HERMINGHAUSEN SR 2 W features a grinding wheel circumferential speed of 35 m/sec and is equipped with a Lenord+Bauer control panel with a digital display. It includes a coolant and filtration tank system, along with a part feed chute/guide. If you are looking to get high-quality grinding capabilities, consider the HERMINGHAUSEN SR 2 W machine we have for sale. Contact us for further details.

Sell our old vertical milling machining center as a spare parts dispenser, unfortunately I can not say what the machine has exactly, I only know that the control unit is defective

turning diameter:1390 mm turning length:14000 mm weight of the machine ca.:13 t More information can be found in the Appendix.

Key data: 190 mm

Stock No: 3764 CNC LATHE Manufacturer: Mori Seiki, Type: ZT 1000Y Machine NO.: ZT101CB0056, Year of manufacture: 2003 Specifications: Max. circumferential diameter 190 mm dia. Max. turn. About BED 250 mm DIA. Main motor power 22/18.5 kw Main spindle speed range 6000 rpm Hole through drawing tube 46 mm dia. C axles 0.001 Y axis 40+/- mm Z Aksen Rapid Traverse 1/2 - 24 m/min Tool turret 1 with 16 stations Motor power driven tools 5.5 / 3.7 / 2.2 kW Kw Tool turret 2 with 16 stations Powered tools. 6000 rpm Sub-spindle Sub-spindle speeds 6000 rpm Control MSX-501 Fabr. Power on 15088 hours Operating hours spindle 5080 hours Controlled in 5+2 axes Accessories: Load and Unload device Hydr. Chuck main spindle 169 mm dia Hydr. Chuck Subspindle 169 mm dia Tool setter Weight: 5000 kg

Stock number: 3912 PROCESSING Manufacturer: EXCELL, Type: 810 Machine NO.: ES 8031, Year of manufacture: 0 Specifications: Table size 900 x 480 mm Large table load 400 kg Longitudinal movement (X) 810 mm Transverse movement (Y) 510 mm Vertical movement (Z) 560 mm Size distance spindle/table 700 mm Spindle Taper 40 Iso Spindle motor 9 Kw Tool changer 25 places Control Fanuc OM Fabr. Accessories: Cooling water system. Operating instructions Length: 2200 mm, Height: 2600 mm, Width: 3500 mm, Weight: 5400 kg

grinding diameter max.:400 mm max. width of grinding wheel:180 mm grinding range:2-100 mm total power requirement:24 kW weight of the machine ca.:3,2 t Out of valve production

propulsion: motor with brake, velocity is adjustable due to the possibility to change the gear wheel description: Type of transport chains: 4 chains, able to handle half pallets; pitch 355mm Remarks: as in an usual crate onveyor a stopper with an air cylinder is used; the pallets go against the stopper and are centered by this into their short side direction, after that the stopper goes back and the pallets continue to move on; able to handle half pallets availability: immediatelly Usable width: 1090 mm Installation dimension: 1500 x 1400 x 600 mm weight (m) [kg]: 200 kg Besides buying and selling of conveyors and machines our strength lies particularly in services and project planning, as for example in rebuilding and adapting of your installation as well as in overhaul and relocation of machines. You have a first idea or even a concrete plan? It does  ...

New CNC working machine brand: Cosmec Type: Smart 30, 5 Achsen Configuration example: other equipment possible on request The smart serie: - Flexibility through cantilever construction - Best equipped for door processing - Protection by laser system (instead of step mats) - Especially good for machining light / small workpieces The controlling: OSAI CNC system control + Aspan CAD-CAM software: - Aspan uses simple commands to execute the machining process - By entering dimensions you can precisely position the machining operations - The machining operations are displayed on the virtual workpiece. - Diverse macros facilitate programming (of holes, slots, linear milling, arc milling...) Aspan Doors - Software module for easy creation of programs for door processing. - Different door types are already stored (doors with milled arches, round doors...) - Doors can ...

new CNC working center Brand: Cosmec Type: Smart 30, 4 Axis example configuration: other equipment on request the smart serie: - Flexibility through cantilever construction - Best equipped for door processing - Protection by laser system (instead of step mats) - Especially good for machining light / small workpieces the controlling: OSAI CNC system controlling + Aspan CAD-CAM Software: - Aspan uses simple commands to perform machining - By entering dimensions you can precisely position the machining operations - The machining operations are displayed on the virtual workpiece. - Various macros facilitate programming (of holes, slots, linear milling, arc milling...) Aspan Doors - Software module for easy creation of programs for door processing - Different door types are already stored (doors with milled arches, round doors...) - Doors can be modified individ ...