machines used for sale

plate thickness: 3 mm angle adjustable from - to: 30 - 120 Grad table height: 900 mm weight: ca. 800 kg Cutting capacity: 3 mm St40 at 150 x 150 mm, 2 mm stainless steel, cutting angle continuously adjustable from 30° to 120°, pneumatic clamping for angle adjustment (Boschert system), machine is in good condition The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Croissant wrapping machine Seewer Rondo SCR40. A0 - Croissat wrapping machine mobile - Manufacturer: Seewer Rondo - Model: SCR40, A0 - 400 volts

plate thickness: max. 3 mm distance betw. rolls: 125 mm throat: max. 500 mm weight: ca. 500 kg Material thickness at 40 kg/mm² tensile strength: max. 3 mm Working width: 500 mm Working depth: 450 mm Manual adjustment of the upper roller Roller center distance: 125 mm Continuously variable working speed: 3–15 m/min Stop skirt 1 set of rollers Forward/reverse operation via foot switch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Number of spindles: 5 St. Working width: 230 mm Working height: 120 mm Length of the planing table: 2500 mm Feed motor: 4 kW Feed speed: 5-30 m/min. control: Memory-Funktion Weinig Powermat 500 with grooved table ---------------------------------- The machine arrives at the warehouse and is cleaned and fully inspected. Brief Summary: ---------------------------------- - 5 Spindles - 8,000 rpm - Grooved table for short or difficult-to-guide workpieces, coated with Marathon PowerCoating - One driven roller in the outfeed table, hardened: 210 mm wide - Left and top spindles controlled for width and height - Quick-release spindle nut Detailed Description: ---------------------------------------------------------------------- - Technical Data: Working width: 20-230 mm Working height: 8-120 mm Number of spindles: 5 1st Spindle - bottom ----------------------------------------------- Motor with ...

A used Universum cone winder and pretzel roller is currently for sale and immediately available in our warehouse in Bielefeld. Universum Cone Wrapper / Pretzel Long Roller Type: LWT 3/80 Prem-50J-EB2W/40 More information and pictures on request.

Machine was never installed in the system. Was to be explained in Brauschule. Very good condition like new

x-travel: 600 mm y-travel: 400 mm z-travel: 400 mm table surface area: 720 x 410 mm spindle turning speed range: 40 - 2000 U/min : mm/min feeds Z-axis: mm/min tool taper: SK 40 total power requirement: 3,0 kW weight of the machine ca.: 1,4 t dimensions: 1,8 x 1,6 x 1,9 m Milling machine with - Toolmakers table - Heidenhain digital readout - Rapid traverse - Coolant system - Central lubrication - Machine feet - incl. drawer unit with contents The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

used spiral mixer Boku SK 160 AK extendable, overhauled, 160 kg dough per kettle, 2 timers, with 1 stainless steel kettle, if required with additional kettles for an additional 3.950€ each, stainless steel spiral, newly painted, clocks renewed, 6.9 kW, 16.5 A

used spiral mixer Boku SK 200 A extendable, overhauled, 200 kg dough per kettle, 2 timers, with 1 stainless steel kettle, if required with additional kettles for an additional 4,100€ each, stainless steel spiral, newly painted, clocks renewed, 13.3 kW, 29.8 A, 380 V

used spiral mixer Sveba Dahlen M 160 Premium, checked-through, 160 kg dough, 2 watches, stainless steel kettle, stainless steel spiral, year of construction 2015, 26 A, 400 V, 50 Hz, Ser.-Nr. 71/63

Key data: 32 mm, 32 mm, 320 mm

Stock number: 4010 CNC lathe SWISS TYPE Manufacturer: TSUGAMI, Type: BO326E-II - 2016 Machines NO.: 23031A, Year of manufacture: 2016 Specifications: Size capacity 32 mm Ø Ma. turning length (fixed guide bush) 320 mm Ma. Turning length (Rotary guide bush) 70 mm Max. threading force of the main spindle M 10 Max. speed drilling capacity 12 mm Main spindle effect 3.7/5.5 kw Sub-spindle Sub spindle speeds 8000 rpm Spindle bore 32 mm Driven tool transformer 6000 ( 4800) - 1 kW pr/min Subspindle effect 2.2/3.7 kw Control Fanuc 32i-B Fabr. Axis Controlled X1-X2-Z1-Z2-Y1-Y2 Opreation time 6575 hours Length: 2400 mm, Height: 2000 mm, Width: 1500 mm, Weight: 3500 kg

Clipping machine Manufacturer: Technopack Tipper Tie Made of stainless steel and durable industrial plastic Easy to clean thanks to smooth surfaces Machine dimensions: Width: 100 cm Depth: 78 cm Height: 180 cm Power: 0.1 kW Voltage: 2.5 A Compressed air: 4–6 bar / 0.4–0.6 MPa

Code: 0375 Brand: GREDA Model: CFL 4 - CE Standard Contouring, milling, and sanding machine for contouring and milling on two opposing sides of a piece of wood, such as chair, armchair, sofa, gun handles, and various - CE Standard Technical data: N° 2 milling units N° 2 milling and sanding units N° 4 motors 7,5 Hp each N° 4 rotation reversals Max workable length 2500 mm Max workable height 180 mm Min/max workable width 20/320 mm Milling unit shaft diameter 35 mm Max milling tools dimensions diameter 160 mm - height 180 mm Carriage feed 30 mt/min Carriage return 30 mt/min Automatic table slowdown with stops Sanding belt length 2500 mm Automatic positioner N° 6 adjustable pressers Total installed power 36 Hp Compressed air 6 bar Overall dimensions mm 6700 x 2200 x 1800 h Weight kg 3600

Press company Walter SL 60t (beverage vending machine) 1991 Punching machine Peddinghaus 1997 Longitudinal seam welding machine Weil 2007 NC Milling Machine FP-4MA N/A Lid CNC Milling Machine DMC63-V N/A Lid Maho Automatic Circular Saw KKS 450 R 2008 Kaltenbach MAG welding machine Fronius Vario Star Unknown Fronius MAG welding machine Fronius Vario Star Unknown Fronius MAG welding machine Fronius Vario Synergic Unknown Fronius MAG welding machine Fronius Vario Star Unknown Fronius MAG welding machine Fronius Vario Synergic Unknown Fronius

Uhlmann BEC300 blister packaging line comprising B1330 blister machine, format area max. 200 x 145 mm (index x width), forming depth max. 12 mm, film width max. 160 mm, max. reel diameter of thermoforming foil 600 mm, max. reel diameter of lidding foil 300 mm, with Hapa 230-T-1C-LR digital printing machine for foils and papers from reel, C2155 intermittend cartoning machine, max. carton format 115 x 100 x 170 mm (LxWxH), pitch 140 mm, max. blister stack height 85 mm, with GUK Cartonac 91 leaflet folder, Wolke m600 inkjet printer and downstream Transnova-RUF robot Flex Line RV-400 case packer & palletiser, packaging section with infeed conveyor, magazine, erecting/loading robot, carton closing station using self-adhesive tape at the bottom and top, carton discharge with labelling system (2 carton labels at a corner position of the carton), palletising with palletising conveyor (1-3), pall ...

Seidenader SI-40 automatic inspection machine for vials, ampoules, etc., with corresponding format parts suitable for objects with a diameter of up to 52 mm, includes format parts for vials 20 ml & 100 ml and ampoules 1 + 2 ml. (Ø10.75 mm) und 3 ml. (Ø12.75 mm), electrics 3X400V/50Hz/3Ph, power 6.0 kW, capacity up to 24,000 objects/min.

Automatic Carton Case Sealer SIAT SM11–S Carton Case Sealer SM11 model is an automatic Fixed Format” case sealer where all adjustments needed to use the machine in a correct way are done manually and for this reason it is used for long runs with same box dimensions. The machine applies automatically two self-adhesive tape stripes on the upper and lower boxes middle line. The SM11 adjustment and use are intuitive, simple and fast. Technical Characteristics Manufacturer SIAT Packing Systems Manufacturer’s type SM11 - S Belt conveyor type SIAT CT-2 12/500 Year of manufacturing 2006 (CT2 year 1999) Output up to 840 boxes/hour Box dimensions Min-Max 200-600 x 150-500 x 100-600 mm (L x W x H) Taping units 2 x K11R for 50 mm wide tape Electricity 500W / 380V / 240V / 50 Hz Certificate CE compliance

Bosch (Eisai) AIM 296 inspection machine suitable for ampoules/vials with a diameter of up to 17.5 mm and a height of up to 130 mm, capacity up to 24,000 ampoules/vials per hour, machine net weight approx. 2700 kg, with Seidenader DAR 350RL external washing and drying machine for ampoules/vials, etc., capacity up to up to 21,000 ampoules/vials per hour., machine net weight approx. 700 kg, includes format parts for ampoules 1 + 2 ml. (Ø10.75 mm), 3 ml. (Ø12.75 mm), 5 ml. (Ø14.75) and 10 ml. (Ø17.75 mm)

Edge banding machine Brand: SCM Model: Stefani One Cell Year of construction: 2019 Technical data: Panel dimensions: Longitudinal feed (min./max.): 250 / 3000 mm Transverse feed (min./max.): 130 / 1200 mm Panel thickness (min./max.): 10 / 60 mm Edge material: Edge banding from the roll with 20° chamfer: 0.3 – 0.8 mm Edge banding from the roll with radius: 1 – 1.5 – 2 mm Glue system: PUR pre-melter: Nordson ALTA PUR 4 Glue basin: HO + SGP glue

Edge banding machine Brand: SCM Model: Stefani One Cell Year of construction: 2019 Technical data: Panel dimensions: Longitudinal feed (min./max.): 250 / 3000 mm Transverse feed (min./max.): 130 / 1200 mm Panel thickness (min./max.): 10 / 60 mm Edge material: Edge banding from the roll with 20° chamfer: 0.3 – 0.8 mm Edge banding from the roll with radius: 1 – 1.5 – 2 mm Glue system: PUR pre-melter: Nordson ALTA PUR 4 Glue basin: HO + SGP glue

used spiral mixer Diosna SP 180 A D extendable, overhauled, for 180 kg dough per kettle, with 1 stainless steel kettle, if required with up to 2 additional kettles for an additional 2.900€ each, stainless steel spiral, Masch.-Nr. 9421-092, 380 V, 50 Hz, 21 A

Automatic Carton Case Erector SIAT F144/4 DX The automatic case erector F144 was built in year 2008 and it is designed to open a ready cut and folded card board blanks as a product box and after that to seal with adhesive tape the bottom flaps of box so that it is ready to be filled with products. Two carriages moved by compressed air (SMC+BOSCH) with suckers to pick cartons from box storage, square and push them in drive belts (2 motors kW 0,18 each) for the bottom flaps forming and sealing Readymade, open cases are fed to a 3 meter long motorized belt conveyor. The case erector has a variable output up to 700 boxes/hour according to box dimensions. Control panel with OMRON PLC has the following functions: box counter - box timer, low box storage alarm, brake/end tape alarm, full line alarm after the machine. F144 model is easy to operate and is built in accordance with CE safety s ...

Labelling Machine for glass bottles Krones Robusta 10000 bph Good condition, mechanical labelling machine for pre-cut paper labels with cold clue. It has two label stations, one with two label feeding trays and another with one feeding tray for front, back and neck labels. The carousel is rotated with variator driven electric motor and bottle tables have a belt drive. The labeller was built in year 1995, profoundly overhauled in 2016 and operated since overhaul only approx. 100 hours and thus in very good condition. Delivery includes labeller and approx. 1.5 meter in feeding and out feeding belt conveyors Technical characteristics Manufacturer: Krones AG Machine type: Robusta 600-10-4-4-180 Capacity: 10’000 bph Label type: Pre-cut paper with cold glue Number of bottle tables: 10 Number of labelling stations: 2 Labels on glass bottles: front, back and neck Manufac ...

Labelling Machine GERNEP Labetta 7500 bph Fully automatic cold glue labelling machine for glass bottles and jars from the first owner, machine made by German Gernep in 2013 and having only 9512 operating hours as a labeller. This labeller has three cold glue label magazines for pre-cut paper labels (neck, front and back, now preserved in storage and a part of delivery scope). It covers all traditional equipment requirements of containers made from glass and PET. The combination of well-tried technologies such as stainless steel glue roller, rubberised and adjustable glue palettes, divided glue scraper knife with glue-saving fine adjustment of the glue thickness, overlay gearbox for exact label positioning. Labeller has been maintained well and last full overhaul (EUR 19’500) was made in the end of 2019. All air driven glue pumps are changed to electric drive pumps and it has stainl ...

Highest sheet capacity at 400 N/mm2 x 1000x2 16 A plug Length 1.30 m Width 0.4 m Height 1.30 m Weight 250 kg Tools

Key data: 13 mm

Vario Speed 280 - 4500 rpm 380 V 16 A Length 0.70 m Width 0.57 m Height 2.05 m Steel table Vise Drill Chuck Röhm Supra 1-13 mm

Manufacturer: Oerlikon Model: Plasmatome 20 HPC ( without cutting table ) Year of Manufacture: 2012 Cutting Range: 2,000 mm x 6,000 mm (2 x 6 meters) Material Thickness Capacity: Up to 35 mm Cutting Method: Plasma Cutting Find more here - / Contact us at -

machine weight ab.: 160 kg Wheel diameter: 600 mm Cutting height: 300 mm Lightweight bandsaw Elektra-Beckum type BA S 600 for sawing wood and other materials. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

internal diameter: 20-35 mm grinding depth: 200 mm swing diameter: mm weight of the machine ca.: 4 t total power requirement: kW dimensions of the machine ca.: m grinding diameter 20-35mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 400 mm turning length: 635 mm control: Heidenhain Eltropilot greates pass round over bed: 570 mm travel -x axis: 220 mm travel -z axis: 635 mm main spindle bore: 79 mm drive of main spindle: 21 kW max. torque on the spindle: 240 Nm main spindle speeds:: 25-5.000 turning speed range - C-axis: 100 U/min workpiece system 12-station turret head: feed power in the axis x + z: 3,5 / 7 N rapid traverse X-axis: 20 m/min rapid traverse Z-axis: 24 m/min coolant device with chip conveyor: total power requirement: 44 kva weight of the machine ca.: 6 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 600 mm turning length: 1250 mm control: Siemens 840D radial face slide travel: 320 mm turning speed range: 5-3.000 U/min Number of tools: 8 St. steady: coolant device with chip conveyor: total power requirement: 42 kva weight of the machine ca.: 5,5 t dimensions of the machine ca.: 3,6x2,15x1,95 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 420 mm : 220 mm : 380 mm : 840x390 mm : 950x250 mm : 65-2600 U/min : DIN 2080 ISO 40 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 420 mm : 220 mm : 380 mm : 840x390 mm : 950x250 mm : 65-2600 U/min : DIN 2080 ISO 40 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 420 mm : 220 mm : 380 mm : 840x390 mm : 950x250 mm : 65-2600 U/min : DIN 2080 ISO 40 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 3000 kN

SANDRETTO SERIE 9 - 300 T Year : 2005

Strapping machine - max. Package dimensions: approx. 600 x 600 mm - Speed: approx. 48 strappings / min. - Suitable for PP strap - Width 5-9 mm adjustable - Strap tension adjustable

Key data: 530 mm, 300 mm, 4 kW

Table length 800mm Feed speed 5/8/12.5/19.5 m/min 4-strip planer blade shaft Ø110mm 3 upper feed rollers 1 table feed roller Speed planing shaft 5000 rpm electr. Table height adjustment with electr. Advertising Extraction hood Ø150mm Dimensions LxWxH=1070x880x1150mm Wt. approx. 700kg The machine is in use. Changes to technical data, typesetting and printing errors as well as errors are reserved at any time!

Key data: 600 kN, 35 mm

SANDRETTO Serie 8 192/60 - 60 T Reference: 192/60 Screw Diameter: 35 mm Injection Volume: 131 cm³ Injection Pressure: 1450 bar L/D Ratio: 21 Distance Between tie bar: 325 x 325 mm Platen Dimensions: 500 x 500 mm Interface Robot Dimensions: 5.17 m x 1.17 m x 1.98 m Weight: 4100 kg

- banding machine - Standard Version - with the existing accessories

SANDRETTO Series 8 430/110 Clamping Force: 110 T Year : 1998 Distance Between tie bar: 415 x 415 mm Platen Dimensions: 610 x 610 mm Mold Thickness (min/max): 100 - 460 mm Opening Stroke: 410 mm Injection Volume: 353 cm³ Injection Pressure: 1215 bar Screw Diameter: 50 mm Weight: 5700 kg Dimensions: 5.67 x 2.03 x 1.32 m SEF 100

Universal milling machine MIKRON WF3DCM/155 Heidenhain TNC 155 Internal machine no. 58 Travels: X-axis: 500 mm Y-axis: 500 mm Z-axis: 350 mm Table surface: 800 x 450 mm Mount: SK 40 DIN ISO Machine weight: approx. 2.3 t

Key data: 2300 kN, 50 mm

SANDRETTO Serie 9 860/2300 Clamping Force: 230 T - 2300 kN Year : 2001 Distance Between tie bar: 585 x 585 mm Platen Dimensions: 860 x 860 mm Mold Thickness (Min/Max): 210 - 630 mm Opening Stroke: 580 mm Injection Volume: 475 cm³ Material Pressure: 1876 bar Screw Diameter: 50 mm Total Machine Power: 44.2 kW L/D Ratio: 20 Robot Interface: Euromap 12 Weight: 10,500 kg Dimensions: 6.25 x 2.28 x 2.1 m SEF 2000

Key data: 4850 kN, 80 mm

SANDRETTO 485 T Series 9 Reference: 2650/4850 Year: 2003 Clamping force: 485 T / 4850 kN Distance between tie bar: 740 x 740 mm Platen dimensions: 1120 x 1120 mm Mold thickness (Min/Max) : 250-850 mm Opening stroke: 830 mm Injection volume: 1768 cm³ Injection pressure: 1500 bar Injection screw diameter: 80 mm L/D ratio: 20 Options: 4 hydraulic cores 1 air blow gun 2 8-way water boxes Dimensions: 8.71 x 2.65 x 2.14 m Weight: 21,500 kg

Key data: 5000 kN, 80 mm

SANDRETTO 500 T Series 7 Type: 3270/500 Clamping Force: 500 T Screw Diameter: 80 mm Theoretical Injection Volume: 2110 cm³ Injection Weight (PS): 2050 g Screw Working Length (L/D): 20 m Plasticizing Capacity: 290 kg/h Heating Zones: 4 Total Heating Power: 31 kW Mold Thickness (Min/Max): 250-800 mm Opening Stroke (Platen Travel): 830 mm Distance Between tiebars: 720 x 720 mm Oil Tank Capacity: 500 L Dimensions: 9.0 x 1.80 x 2.50 m Total Weight: 25,000 kg

Key data: 1000 kN

BILLION H260 / 100 - 100T Type: H260/100 Clamping Force: 100T Control: Dixit 500 Operating Hours: 25,000 h Distance Between tiebar: 445 x 445 mm Platen Dimensions (H x W): 630 x 630 mm Mold Thickness (Min/Max): 180-400 mm Opening Stroke: 380 mm Weight: 5100 kg Dimensions: 4.6 x 1.7 x 2.1 m

- Strapping machine - Standard version

Key data: 3200 kN, 75 mm

BILLION HERCULE H2000 Series - 320 T Clamping Force : 320 T - 3200 kN Injection Unit : H 2000 Screw Diameter: 75 mm Year: 1998 Maximum Theoretical Volume : 1259 cm³ Maximum Material Pressure : 1587 bar Maximum Injection Flow Rate : 970 cm³/s Platen Dimensions : 1045 × 1045 mm Distance Between tie bar : 735 × 735 mm Dimensions : 7.6 x 2.1 x 2.6 m Weight : 15,500 kg

Key data: 11000 kN, 150 mm

Clamping force: 1100 T Year: 1999 Working hours: 86,200 h Screw diameter: 150 mm Column diameter: 230 mm Displacement: 10,955 cm³ Injection pressure: 1330 bar Ejection force: 215 N Opening stroke: 1800 mm Platen dimensions (H x W): 1150 x 1400 mm Heating capacity: 113 kW (153.64 hp) Total weight: 77,000 kg Clamping Unit (L x L x H) : 5 x 3,5 x 2,6 m Weight : 53T Injection unit(L x L x H) : 5,5 x 2,7 x 2 m Weight : 24T

Key data: 10000 kN, 110 mm

DEMAG Ergotech 1000/1400-8000 -1000T Year : 2001 Screw diameter : 110mm Plasticizing capacity (g/s): 130 Injection capacity (cm³/s): 780 Injection pressure (bar): 1815 bar Injection volume (cm³): 4370 cm³ Mold thickness (min/max): 500 x 1200mm Distance between tiebars : 1400 x 1120mm Platen dimensions (h x w): 1950 x 1670mm Closing stroke: 1250mm Centering ring diameter: 250mm Ejection passage diameter: 160mm Ejection stroke: 350mm Optional: Sequential injection, 6 hydraulic cores, 2 pneumatic cores, ejection plate, and bimetallic sleeve screw. + Robot Star ref TX 1800 EMI

Key data: 1000 kN, 40 mm

Year: 1994 Clamping Force: 100T Screw Diameter: 40mm L/D Ratio: 20 Mold Opening Stroke: 150 x 410 mm Mold Thickness: 150 x 450 mm Platen Dimensions: 590 x 690 mm Distance Between tiebar: 400 x 400 mm Maximum Pressure on Material: 1715 bar Injectable Volume: 302cc Weight: 4170kg Dimensions: 4805 x 1015 x 2065 mm