128,748 used machines on RESALE, but how to find them? Machine Search
Key data: 1300 kN
Arburg 520S 1300-800 / Machine in very good technical condition Year of Make: 2008 Injection unit: Screw diameter: 50 mm Injection weight: 359 g Spray pressure: 2000 bar Dosing volume: 392 ccm Clamping unit: Clamping force: 130 t Tiebar spacing: 520x520 mm Size of the clamping plates: 695x695 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA - Touchscreen Additional equipment: Machine in very good technical condition Euromap 67 Euromap 12 Robot interface Air Valve x 2 Hardened injection unit - Bimetal The machine was regularly serviced by the authorised service Arburg in Germany Dimensions: Weight: 6450 kg Length/Width/Height: 4.81x1.57x2.19 m Drive: Pumps/motor: 30 kW All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or ...
Arburg 420C 1300-675 with the Star Sprue Picker Year of Make: 2002 Injection unit: Screw diameter: 50 mm Injection weight: 297 g Spray pressure: 2080 bar Dosing volume: 353 ccm Clamping unit: Clamping force: 130 t Spar spacing: 420x420 mm Size of the clamping plates: 605x605 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA Additional equipment: Euromap 12 Robot interface Air Valve x 2 Hydraulic core pull x 2 Hardened injection unit - Bimetal Type of injection unit: Vario - This offers the possibility of using the injection unit, e.g. for side spraying Covers from the operator's side open automatically Dimensions: Weight: 4330 kg Length/Width/Height: 4.80x1.64x2.08 m Drive: Pumps/motor: 30 kW Heating capacity: 14.9 kW Total power: 44.9 kW All offered machines are started by our service technicians before they are sold. It is poss ...
Key data: 1500 kN
Arburg 470C 1500-150/150 / 2K machine / machine in very good technical condition Year of Make: 2005 Injection unit: Screw diameter: 25 mm Injection weight: 49 g Spray pressure: 2500 bar Dosing volume: 54 ccm Clamping unit : Clamping force: 150 t Spar spacing: 470x470 mm Size of the clamping plates: 685x685 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA Additional equipment: 2K Machine Euromap 67 Robot interface Air Valve x 1 Hydraulic core pull x 1 Hardened injection unit - Bimetal Proportional valve on the injection unit – precise injection Type of injection unit: Vario - This offers the possibility of using the injection unit, e.g. for side spraying Parallel movements The vertical injection unit - screw diameter fi 25 mm (49 g/hp) It is possible to change screw diameters in both injection units for the screw diameters recommended by ...
Arburg 470C 1500-400 with the Wittmann W721 robot Year of manufacture: 12.2006 Injection unit: Screw diameter: 40 mm Injection weight: 184 g Spray pressure: 2000 bar Dosing volume: 201 cc Clamping unit: Clamping force: 150 t Spar spacing: 470x470 mm Size of the clamping plates: 650x650 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA - Touchscreen Additional equipment: Euromap 67 Robot interface Control with air valve Hydraulic core pull x 1 Hardened injection unit - Bimetal Built-in conveyor belt and sorting flap Robot Wittmann W721 Year of Make: 2006 4-axis robot: 3 axes are driven by servo motors (electric); Axis C - pneumatic Traversing in axes: X-550, Y-1200, Z-3000 Touch control panel The safety package for robots Robot with adapter Purchase of the robot at an additional cost Dimensions: Weight: 4900 kg Length/Width/Height: 4 ...
Key data: 1500 kN
Arburg 470C 1500-675 Year of Make: 2004 Injection unit: Screw diameter: 60 mm Injection weight: 427 g Spray pressure: 1440 bar Dosing volume: 508 cc Clamping unit: Clamping force: 150 t Spar spacing: 470x470 mm Size of the clamping plates: 685x685 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA Additional equipment: Euromap 12 Robot interface Core train control Hardened injection unit - Bimetal Parallel movements Dimensions: Weight: 4660 kg Length/Width/Height: 5.00x1.93x2.22 m Drive: Pumps/motor: 30 kW Heating capacity: 14.9 kW Total power: 44.9 kW All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request
Arburg 470C 1500-400 with the Wittmann W711 robot Year of Make: 2008 Injection unit: Screw diameter: 45 mm Injection weight: 232 g Spray pressure: 1580 bar Dosing volume: 254 ccm Clamping unit: Clamping force: 150 t Spar spacing: 470x470 mm Size of the clamping plates: 650x650 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA - Touchscreen Additional equipment: Euromap 67 Robot interface Air Valve x 1 Hardened injection unit - Bimetal Proportional valve on the injection unit – precise injection Robot Wittmann W711 Year of Make: 2007 4-axis robot: 3 axes are driven by servo motors (electric); Axis C Traversing in axes: X-420, Y-1200, Z-2000 Touch control panel The safety package for robots Robot with adapter Purchase of the robot at an additional cost Dimensions: Weight: 4900 kg Length/Width/Height: 4.44x1.63x2.09 m Drive: Pumps ...
Key data: 1500 kN
Arburg 470C 1500-400 Year of manufacture: 07.2009 Injection unit: Screw diameter: 45 mm Injection weight: 232 g Spray pressure: 1580 bar Dosing volume: 254 ccm Clamping unit: Clamping force: 150 t Spar spacing: 470x470 mm Size of the clamping plates: 650x650 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA - Touchscreen Additional equipment: Core train control Hardened injection unit - Bimetal It is possible to change the screw diameter Dimensions: Weight: 4790 kg Length/Width/Height: 4.44x1.63x2.09 m Drive: Pumps/motor: 18.5 kW Heating capacity: 9.4 kW Total power: 27.9 kW All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request
Arburg 470C 1500-400 Year of manufacture: 07.2009 Injection unit: Screw diameter: 45 mm Injection weight: 232 g Spray pressure: 1580 bar Dosing volume: 254 ccm Clamping unit: Clamping force: 150 t Spar spacing: 470x470 mm Size of the clamping plates: 650x650 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA - Touchscreen Additional equipment: Core train control Hardened injection unit - Bimetal It is possible to change the screw diameter Dimensions: Weight: 4790 kg Length/Width/Height: 4.44x1.63x2.09 m Drive: Pumps/motor: 18.5 kW Heating capacity: 9.4 kW Total power: 27.9 kW All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request
Arburg 520H 1500-400 e² / Hybrid machine Year of Make: 2011 Injection unit: Screw diameter: 40 mm Injection weight: 184 g Spray pressure: 2000 bar Dosing volume: 201 cc Clamping unit: Clamping force: 150 t Tiebar spacing: 520x520 mm Size of the clamping plates: 695x695 mm Ejector: electric Clamping unit: toggle lever Control: SELOGICA - Touchscreen Additional equipment: Hybrid machine: energy-saving and very quiet Euromap 67 Robot interface Air valve x 4 on the side of the fixed clamping plate Air valve x 3 on the side of the movable clamping plate Hydraulic core pull x 1 on the side of the fixed clamping plate Hardened injection unit - Bimetal Main motor of the machine - Servo motor driven by inverter - Energy saving The injection unit is driven by the servo motor, which is controlled by an inverter Machine with cylinder / battery with compressed nitroge ...
Key data: 1500 kN
Arburg 520H 1500-400 e² / Hybrid machine Year of Make: 2011 Injection unit: Screw diameter: 40 mm Injection weight: 184 g Spray pressure: 2000 bar Dosing volume: 201 cc Clamping unit: Clamping force: 150 t Tiebar spacing: 520x520 mm Size of the clamping plates: 695x695 mm Ejector: electric Clamping unit: toggle lever Control: SELOGICA - Touchscreen Additional equipment: Hybrid machine: energy-saving and very quiet Euromap 67 Robot interface Core train control Control with hot runners x 8 Hardened injection unit - Bimetal Main motor of the machine - Servo motor driven by inverter - Energy saving The injection unit is driven by the servo motor, which is controlled by an inverter Machine with cylinder / battery with compressed nitrogen (extra charge for fast working) Central lubrication Parallel movements Priamus Sensor - Tool Pressure Control Dimension ...
Key data: 1600 kN
Arburg 520S 1600-400/170 e² / Production line with the Geiger robot Year of Make: 2012 Injection unit: Screw diameter: 35 mm Injection weight: 141 g Spray pressure: 2500 bar Dosing volume: 154 ccm Clamping unit: Clamping force: 160 t Tiebar spacing: 520x520 mm Size of the clamping plates: 695x695 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA - Touchscreen Additional equipment: 2K injection moulding machine with rotary table and robot Geiger Very good technical condition Hybrid machine: energy-saving and very quiet Euromap 67 Robot interface Air Valve x 4 Hydraulic core pull x 5 Control with hot runners x 12 Reinforced Injection Units – Bimetal Machine with two cylinders / batteries with compressed nitrogen (extra charge for fast work) Parallel movements Screw diameter in vertical injection unit: ⌀30 mm - 77 g/hp Built-in Arburg c ...
Arburg 570C 2000-350/150 / Production line with the Arburg Multilift side robot / 2K machine Year of Make: 2003 Injection unit: Screw diameter: 40 mm Injection weight: 153 g Spray pressure: 2120 bar Dosing volume: 182 ccm Clamping unit: Clamping force: 200 t Handlebar spacing: 570x570 mm Size of the clamping plates: 795x795 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA Additional equipment: Production line with the Arburg Multilift side robot 2K Machine Air Valve x 1 Hydraulic core pull x 5 Control with hot runners Reinforced Injection Units – Bimetal Proportional valves on sprinkler units - precise spraying The vertical injection unit - screw diameter: ⌀25 mm - 49 g/hp All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine o ...
Arburg 570S 2200-290/100/100 / Production line with the Wittmann W823 robot / Operating hours: 20,499 h in automatic mode Year of Make: 2016 Injection unit: Screw diameter: 35 mm Injection weight: 132 g Spray pressure: 2000 bar Dosing volume: 144 ccm Clamping unit: Clamping force: 220 t Handlebar spacing: 570x570 mm Size of the clamping plates: 795x795 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA - Touchscreen Additional equipment: 3-component injection moulding machine, high-speed Very good technical condition Operating hours: 20,499 h in automatic mode Euromap 67 Robot interface Air Valve x 6 Hydraulic, needle-core pull, controlled by a proportional valve x 4 Control with hot runners Hardened injection unit - Bimetal Proportional valve on the injection unit – precise injection Machine with two cylinders / battery with compressed ni ...
Key data: 2000 kN
Arburg 570H 2000-800 e² / Hybrid machine / Production line with the Arburg Multilift Select robot Year of Make: 2011 Injection unit: Screw diameter: 50 mm Injection weight: 359 g Spray pressure: 2000 bar Dosing volume: 392 ccm Clamping unit: Clamping force: 200 t Handlebar spacing: 570x570 mm Size of the clamping plates: 795x795 mm Ejector: electric Clamping unit: toggle lever Control: SELOGICA - Touchscreen Additional equipment: Hybrid machine: energy-saving and very quiet Euromap 67 Robot interface Air Valve x 4 Hydraulic core pull x 2 Control with hot runners x 12 Hardened injection unit - Bimetal Main motor of the machine - Servo motor driven by inverter - Energy saving The injection unit is driven by the servo motor, which is controlled by an inverter Machine with cylinder / battery with compressed nitrogen (extra charge for fast working) Central lu ...
Arburg 630S 2500-1300 ECO / Production line with the Sepro Industrial Robot SDR 22S Year of Make: 2008 Injection unit: Screw diameter: 55 mm Injection weight: 521 g Spray pressure: 2380 bar Dosing volume: 570 ccm Clamping unit: Clamping force: 250 t Tiebar spacing: 630x630 mm Size of the clamping plates: 900x900 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA - Touchscreen Additional equipment: Euromap 67 Robot interface Air Valve x 4 Hydraulic core pull x 2 Control with hot runners x 15 Hardened injection unit - Bimetal Machine with cylinder / battery with compressed nitrogen (extra charge for fast working) ECO – the machine has a system for adjusting the minimum tool height Robot - Sepro Industrial Robot SDR 22S Year of Make: 2016 4-axis robot: 3 axes are driven by servo motors (electric); Axis C - pneumatic Traversing in axes: X-150 ...
Arburg 1500T 3200-1300 e² / Hybrid machine with a turntable Year of Make: 2011 Injection unit: Screw diameter: 60 mm Injection weight: 607 g Spray pressure: 2000 bar Dosing volume: 664 ccm Clamping unit: Clamping force: 320 t Spar spacing: 0x0 mm Size of the clamping plates: 1510 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA - Touchscreen Additional equipment: Hybrid machine: high-speed, energy-saving and very quiet Operating hours: approx. 30,000 in automatic mode Euromap 67 Robot interface Control with air valve Hydraulic core pull x 3 Control with hot runners x 13 Hardened injection unit - Bimetal Main motor of the machine – servo motor driven by inverter Very precise rotary table, driven by a servo motor, controlled by an inverter Rotary table diameter: 1500 mm Horizontal injection unit with automatic injection height adjustment ...
Key data: 1250 mm, 1400 mm
Inv. Num. : 8970 Type: BT 1250 C2 Producer: TOS HULIN Created: 2016 Parameters: Switch-on hours: 15429 h Equipment: C-axis Powered tools Max. turning diameter: 1,400 mm Face plate diameter: 1,250 mm Max. workpiece height: 1,400 mm Max. workpiece weight: 8,000 kg Speed range faceplate: 2–400 rpm (2-stage infinitely variable control) Main drive SIEMENS: 44 kW Driven tools: 4–3,000 rpm Power tool drive SIEMENS: 22 kW Max. cutting force: 50,000 N Dimensions and weight: Machine height: 5,555 mm Space requirement incl. protective cover: 7,470 x 5,725 mm Total weight: approx. 34,000 kg Ideal for heavy-duty machining, energy plant construction and large rotationally symmetrical components.
Key data: 1600 mm, 2000 mm, 1500 mm
Inv. Num. : 8971 Type: BT 1600 S2 Producer: TOS HULIN Created: 2018 Parameters: Switch-on hours: 11910 h Max. turning diameter: 2,000 mm Face plate diameter: 1,600 mm Max. workpiece height: 1,500 mm Max. workpiece weight: 12,000 kg Speed range faceplate: 2–315 rpm (2-stage infinitely variable control) Main drive SIEMENS: 58 kW Max. cutting force: 45,000 N Working stroke ram: 1,060 mm Feeds: Working feed: 1–4,000 mm/min Rapid traverse: 12,000 mm/min Feed per revolution: 0.001–50 mm/rev Threading: 0.01–400 mm/rev Dimensions and weight: Machine height: 5,655 mm Space requirement incl. protective cover: 8,685 x 5,325 mm Total weight: approx. 46,000 kg
Arburg 820S 4000-2100/400 / Production line with the Sepro Industrial Robot SR S5-35 S3 Trans robot / Operating hours: 42,014 h in automatic mode Year of manufacture: 09.2012 Injection unit: Screw diameter: 60 mm Injection weight: 723 g Spray pressure: 2500 bar Dosing volume: 792 ccm Clamping unit: Clamping force: 400 t Tiebar spacing: 820x820 mm Size of the clamping plates: 1171x1171 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA - Touchscreen Additional equipment: 2K Injection Molding Machine with Turntable and Robot Very good technical condition Operating hours: 42,014 h in automatic mode Euromap 67 Robot interface Air Valve x 6 Hydraulic, needle-core pull, controlled by a proportional valve x 4 pairs Control with hot runners x 24 Reinforced Injection Units – Bimetal Proportional valve on vertical injection unit – precise injection ...
Used Used PET Blower Sidel 10.14 2013: Year: 2013 Condition: Good Used PET Blower Sidel: Model: SBO 10/14 Year: 2013 Speed: 7.500 BPH Rotary 10 cavities Hopper included Elevator included Orientator included Inspector included Safety protections Code: W 113 More details: https://bottlingscout.com
Used Used PET Blower Uniloy Comec ibm 42: Year: 1990 Condition: Good Used blower uniloy Comec Year: 1990 Speed: 2200 bph Model: ibm 42 Cavities: 6 Compressor: atlas copco 08 Bottles formats: 3 cl to 500 ml Preform uploader Safety protections Code: W 59 More details: https://bottlingscout.com
Used Used Blower Sidel PET 10/10 Four 1994: Year: 1994 Condition: Good Used Blower Sidel PET 10/10 Four 1994: Model: SB010/10 FOUR Year: 1994 Speed: 10.900 bottles/hour Preform: 1881 15 gr PCO 1881 (0.5 l) and 26.5 gr ? (1.5 l) Type: rotary Number of molds: 10 Air recovery system not in place Refrigeration unit included AIR COMPRESSOR VAN TECHNOLOGY Model: VAN-37 VSD Year: 2014 Speed: 330 m3/h 10 bar Stages: 1 screw stage ? 1 set; two sets are provided to ensure production continuity in the event of a failure of one set. The set includes a screw compressor + VAN-22 kW booster. AIR COMPRESSOR KOMNINO Model: KP-1000-11/0.8 Stages: 3 Booster 10 bar Safety protections Code: W 108 More details: https://bottlingscout.com
Used Used PET Blower Sipa Sfr 16: Year: 2007 Condition: Good Used Pet Blower Sipa Year: 2007 Speed: 24.000 bph Model: sfr 16 Stamp included: 1.5 lt 16 cavities Machine overhauled in 2019 Compressor atlas copco Booster Safety protections. Code: W 36 More details: https://bottlingscout.com
Used Used Blow Moulding Machine Sidel Sbo 16.16: Year: 1993 Condition: Good Used Blow Moulding Machine Sidel Sbo 16.16: Year: 1993 Speed: 16.000 bph Model: sbo 16/16 Number of cavities: 16 Preform tipper Preform orienter Safety protections Code: W 77 More details: https://bottlingscout.com
Used Used Blow Moulding Machine Sipa sf 8/4: Year: 1998 Condition: Good Used Blow Moulding Machine Sipa sf 8/4: Year: 1998. Speed: 4.000 bph. Model: sf 8/4. 4 cavities. Format available: 0.5 lt ? 1.5 lt ? 2.0 lt. Preform loader. Preform tipper. Complete with air recovery system. Safety protections. Code: W 14 More details: https://bottlingscout.com
Used Used Blow Moulding Machine Sidel 7.200 bph: Year: 1998 Condition: Good Used Blow Moulding Machine Sidel 7.200 bph: Year: 1998 Speed: 7.200 bph sul 1.5 l Model: sbo 6/10 serie 1 Number of cavities: 6 Bottle neck format 29/25 mm Preform elevator/orientator Stamp not included Worked hours: 47.000 Safety protections Code: W 84 More details: https://bottlingscout.com
Key data: 3200 mm, 6 mm
Hydraulic swivel bending machine, hydraulic dynamic crowning, touch screen, pressure regulation of the upper beam, mot. Back gauge (1000mm), electr./hydr. Adjustment of the bending beam
Used Used PET Blower Sidel Sbo 6: Year: 1999 Condition: Good Used PET Blower Sidel Sbo 6: Year: 1999 Speed: 7.800 bph Model: sbo 6 serie 2 Number of cavities: 6 Preform tipper sidel Hopper and preform feeder sidel Stamp not included Safety protections Code: W 85 More details: https://bottlingscout.com
Used Used Distributor Cones Nortan: Year: 2003 Condition: Good Model: MULTICAP 75C Year: 2003 Speed: 6.800 bph Safety protections Code: BC 391 More details: https://bottlingscout.com
Used Used Blow Moulding Machine Sipa Sfr 16: Year: 2001 Condition: Good Used Blow Moulding Machine Sipa Sfr 16 : Year: 2001 Model: sfr 16 Speed: 18.000 bph on 1.5 lt 22.000 bph on 0.5 lt Number of cavities: 16 Preform elevator Preform orientator Safety protections Code: W 79 More details: https://bottlingscout.com
Used Used Bedo Tray Former 2008: Year: 2008 Condition: Good Used Bedo Tray Former 2008: Model VA 9095 Year: 2008 Speed: 15 cpm-900 cph Closure type: hot melt glue Technomelt of Henkel Safety protections Code: G 95 More details: https://bottlingscout.com
Used Used Blow Moulding Machine Sipa Sf-08004: Year: 1994 Condition: Good Used Blow Moulding Machine Sipa Sf-08004: Year: 1994 Speed: 4.000 bph Model: sf-08004 Number of cavities: 4 Type: linear Preform tipper Preform hopper Bottle formats: 1.5 lt Safety protections Code: W 86 More details: https://bottlingscout.com
Used Used Dryer Tunnel Omar 2018: Year: 2018 Condition: Good Used Dryer Tunnel Omar 2018: Year: 2018 Max speed: 8.000 Bph Direction: Linear Function: Dry Drying type: Air blades Safety protections Code: M 78 More details: https://bottlingscout.com
Used Used Blow Moulding Machine Sidel 16.000 bph: Year: 2002 Condition: Good Used Blow Moulding Machine Sidel 16.000 bph: Year: 2002 Speed: 16.000 Bph Number of heads: 12 Preform elevator included Preform unscrambler included Compressor NOT included Chiller NOT included Stamp NOT included Neck measurements: 1881 Safety protections Codice: W 88 Code: W 88 More details: https://bottlingscout.com
Used Used Tangential Filter System Permeare: Year: 2010 Condition: Good Used Tangential Filter System Permeare: Model: Permawine mini Pressure: max 10 BAR Year: 2010 Speed: up to 4000 L/H Code: P 21 More details: https://bottlingscout.com
Used Used Blow Moulding Machine Sidel Sbo 6: Year: 2002 Condition: Good Used Blow Moulding Machine Sidel Sbo 6 Year: 2002 Speed: 10.000 bph Number of cavities: 6 Chiller not included Compressor not included Preform unscrambler Preform elevator Preform tipper Safety protections Code: W 89 More details: https://bottlingscout.com
Used Used Bottle-Heaters cames IR 10: Year: 2015 Condition: Good Used Bottle-Heaters cames IR 10: Speed: 3.000 bph. Year: 2015. Model: IR 10 Heating system with infrared lamps Safety protections. Code: M 11 More details: https://bottlingscout.com
Used Used Blow Moulding Machine Terta Pak Dynablow db 30: Year: 1998 Condition: Good Used Blow Moulding Machine Terta Pak Dynablow db 30: Year: 1998 Model: DYNABLOW DB 30 Speed: 3.000 Bph Number of cavities: 3 Type: Linear Compressor NOT included Chiller NOT included Safety protections Code: W 90 More details: https://bottlingscout.com
Slicer Sharpen V330, Stainless steel housing, with new rubber feet, Connection 400 V, dimensions LxWxH approx. 60x62x45cm, weight approx. 53kg, good used condition, fully functional
Used Used Blow Moulding Machine Smi Sr 8: Year: 2006 Condition: Good Used Blow Moulding Machine Smi Sr 8: Year: 2006 Speed: 12.800 BPH Model: SR 8 Nr. 8 cavities Bottle formats: 0.33 LT | 0.5 LT (Stamp included) Worked hours: 58.432 Chiller NOT included Preform elevator/Orientator included Preform tipper included Safety protections Code: W 91 More details: https://bottlingscout.com
Heidelberg OHZ S, age 1956 540x720 mm (21x28") for die-cutting Available: at short term
Used Used PET Blower Kosme Ksb 4 L 6.800 bph: Year: 2006 Condition: Good Used PET Blower Kosme Ksb 4 L 6.800 bph: Year: 2006 Speed: 6.800 Bph Model: KSB 4 L Number of cavities: 4 Compressor not included Chiller not included Preform feeder Preform tipper Formats: Diameter Max. 110mm Length Max. 340mm Volume Max. 2.5 litri 2 Formats included: 1000 ml e 500 ml Safety protections Code: W 101 More details: https://bottlingscout.com
Polar 115 E, Year 1998 Colour Monitor Program Airtable Airtable right Airtable left Jogger RB5 Baumann Transomat BA3N Etc. Available: at short term
Used Used Krones PET Blow Moulding machine Contiform S8: Year: 2004 Condition: Good Used Krones PET Blow Moulding machine Contiform S8: Including (preform tipper, preform hopper, preform unscrambler, chiller, air conveyors for bottle transport year 2004) Model: Contiform S8 Year: 2004 Speed: 13,600 BPH Number of cavities: 8 Machine dimensions: Carousel 2000 mm x 2000 mm x 3000 mm (h) Oven 4000 mm x 2000 mm x 3000 mm Safety Protections Code: W 105 More details: https://bottlingscout.com
Used Used PET Blower Blomax 4 Krupp Corpoplast 4.500 bph: Year: 2000 Condition: Good Used PET Blower Blomax 4 Krupp Corpoplast 4.500 bph: Model: Blomax 4 Year: 2000 Speed: 4.500 BPH Type: Rotary Number of cavities: 4 (molds included) Air recovery system Safety protections Code: W 106 More details: https://bottlingscout.com
Year: 2006 - technically efficient, ready to work – after full service - handle function - copying template - pneumatic profile mounting - centering device
Used Used Complete PET Sidel-Krones 18.000 bph: Year: 2000 Condition: Good Used Complete PET Sidel-Krones 18.000 bph: Product: Still water Speed: 18,000 l/h 2 lt (? 92) Formats: 0.5 and 2 lt Preform tipper Manufacturer: VE.CO. Model: R 13/2 Year: 2002 Blow molding, filling and capping monoblock composed of: SIDEL SBO 16 Series 2 blower Type: rotary Number of molds: 16 (molds not included) Complete set included for Alaska neck processing Air recovery system NO CHILLER SIDEL ALSIM filler Year of manufacture: 2002 Rotation direction: counterclockwise Number of valves/taps: 63 Filling type: gravity Valve type: mechanical Pressurized cabin with filters AROL capper Number of heads: 12 Pre-threaded plastic cap: GRAVITY and HEXALITE TETHERED GME30.28 NCB PT 1.00g (we have the drawing) Distribution system: pick & place COMBI OVERHAULED IN LATE 2024 Cap elevator: Manufacturer: AROL Type: mechanica ...
Used Used Capsuler Nortan 4.4 TR 2016: Year: 2016 Condition: Good Used Capsuler Nortan 4.4 TR 2016: Model: Prisma 4+4 TR Year: 2016 Speed: 5.500 BPH with PVC and 3.000 with polylaminate Direction: Clockwise Manual head adjustment 4 thermal heads for PVC caps and 4 heads for polylaminate Safety protections Code: BC 390 More details: https://bottlingscout.com
Automatic filling and capping machine for bottles and jars 100-1000ml, capacity 16-20 pcs/m, capping is suitable for pump dispensers or caps
maximum number of results exceeded
please refine your search
