machines for plastic used for sale

Control Heidenhain TNC620 Travel X/Y/Z [mm] 4100/420/300 Tool pick-up SK40 General: Designation Autom. Profile Machining Center AP-B 4000 Machining length 4,000 mm Travel X/Y/Z 4,100 / 420 / 300 mm Machine hood: Machine hood can be opened pneumatically upwards Operation: Operating terminal can be moved over the length of the machine Control: CNC control Heidenhain TNC 620 Additional control: Heidenhain handwheel HR130 Table specification: T-groove strips size 16, mounted longitudinally to the X-axis Bearing surface: 4,200 x 420 mm Spindle: Engine power: 14 KW S1/19 kW S6 Engine cooling: water with additive Speed range: 100 to 14000 rpm Torque: 74 Nm S1 / 100 Nm S6 Drilling capacity in St 60/Alu: 25 mm/30 mm Thread in St 60/Alu: M20/M30 Tool magazine: Tool holder: SK 40 Tool clamping system: Spring package pull-in force 9 KN Version: 12-fold disc magazine Cha ...

Pallet feeder FP 120 Navigator control 6 folding pockets in the parallel fold section 2 folding knives in the cross fold section 1 additional folding pocket after the 1st cross fold Window cassette Crossfold section can be lifted up for servicing rollers Pocket rollers can be pulled aside for servicing Noise absorbing hood Rollers in good condition Without delivery Included: MBO FW II-560/4 Second unit (variable) width 56 cm Station: 4 folding pockets 56 cm following knife shaft noise absorbing hood

REF-2261 AUTOMATIC CAN SEAMER SOMME NORA-313-VAC WITH VACUUM FILLING MACHINE 6 VALVES Automatic tin can seaming machine with 6-valve filling system Manufacturer: SOMME Model: NORA-313-VAC Can size: 3kg Output: 3,000 cans/ hour Vacuum pump dimensions: width 1,000mm, length 1,300mm, height 1,800mm Overall dimensions: width (including infeed belt) 3,600mm, length 1,900mm, height 2,000mm

Process chiller / chiller air-cooled, Type: CYGNUS TECH CYT 081-BIO – 19.8 kW Manufacturer: MTA S.p.A. CYGNUS TECH CYT 081-BIO are compact water cooling units designed for outdoor installation down to -20°C suction temperature. Including crank tub heating, buffer tank and built-in P1 circulation pump --Optimized for biogas cooling-- Cooling capacity kW 19.8 Cold water temp. Exit/Entry: 7 / 12°C Volume flow m³/h 3.43 Head available bar: 2.03 Ambient temperature °C 32 Refrigerant R 410A Electrical data: Voltage V 400, Frequency Hz 50, Phase Ph 3 Max. power consumption (kW) 10 Max. Current (A) 19 Starting Current Circuit (A) 102 Protection class: IPX4 Dimensions: Length mm 1960, width mm 810, height mm 1203 Weight kg 457 Connection R 1"1/4 Serial No.: 2200430168 Year of construction 2025 Condition: Optical 1, Technically ok (Bearing Machine)  ...

I sell a combined pin cutting machine with drill head BALESTRINI I2F 1 swivel table with pneumatic material pressure. Automatic cutting saw from below. Milling head for pin or finger joint production. Drill head for dubel drilling production 3 spindle. Feed automatically. End sensors positioning. Available the same.

GeneralUniversal Milling Machines; Control: DMG MORI SLIMline® Multi-Touch control Working area 1Longitudinal500 mmCross450 mmVertical400 mmTechnical DataFeed rate longitudinal/transverse/vertical30000/30000/30000 mm/minRapid traverse longitudinal/transverse/vertical30/30/30 m/minFloor space/WeightDimensions (L x W x H)3,15 x 2,86 x 2,71 (4,14 x 2,91 x 2,71) mWeight approx.5000 KgSwivel Rotary Table Powered B/C AxesSwivel Rotary Table Powered B/C Axes with automatic hydraulic clamping Electronic angle indication (B&C Axes) and Working Plane transformation For positioning only!Mode for positioning only5. Axes (swivelling range) -5/+110 x 0,001 degree4. Axes (swivelling range) 360 x 0,001 degreeDistance between T-Slots 63 mmNumber of Slots 7Slot width 14 mmMaximum load (table centre) 200 KgTable surface Ø 630 x 500 mmType of Measuring system Direct measuring systemDirect measuring system ...

Makra Edge Deburring Machine KEG 150 further inventory and ALL prices at: inventar-verkauf.de/id/alesco An efficient and durable edge deburring machine that is suitable for both professional and DIY enthusiasts. With a power of 1050W, this device offers outstanding performance for all kinds of deburring tasks. The infinitely variable speed control allows a maximum speed of up to 25,000 rpm, which enables precise and fast deburring work. The device is used, but has a long service life due to its robust construction and excellent performance. The KEG 150 is a versatile and powerful tool that meets all your edge deburring needs.

I sell an Angular drill with hanging insert suitable for tur production. MARZANI MACCHINE CHEAP WORK Year of construction: 1993 Number of drilling spindle 1 (drill head fully -7 to +90° adjustable) Number of insert heads 1 (magazine suitable for turret hanging) Insert head mechanical, screw insert Very good condition. Available the same.

Control Siemens 840Dsl Speed [rpm] 24000 Travel X/Y/Z [mm] 2600/1700/950 Tool Attachment HSK-A63 Spindle: Technology Swivel head with motor spindle Speed 24,000 rpm Power (max.) 15 kW Torque (max.) 14.3 Nm Tool holder HSK-A63 A-axis +/- 120° C-axis 270° General: Tool Magazine 18 Stations Clamping area 2,350 x 1,700 mm Rapid traverse in X/Y/Z 80/80/60 m/min Equipment/accessories: Workpiece Measurement Probe, m&h RWP 20.50 Tool Measurement Laser, Hexagon Tool breakage detection stylus, m&h TS 35.20 Setup operation Electronic handwheel 3D extruder CEAD S25 Granulate dryer/conveyor Vismec Other equipment spindle coolers

Offer here various spare parts from a SIG Blomax 20 Series 3 yoc. 2006. 220. Transport mandrels z. Teil neu. Conversion kit to PCO 1881. Mother moulds, Kpl. blowing stations. Heating box etc. see also pictures

Folder Gluer (folding carton gluer)

Folder Gluer (folding carton gluer)

Auction-ID: A1-45737-157

Ref.-No. 10009-20-1276 Table Laser Designation of the attachment marking laser SAL 22 Manufacturer SH-Made in Germany Model SAL22 Year of construction NEW Compact ALL-in-One table machine for laser processing • Fiber laser 20W (Optional: 30W, 50W) • Laser class 1 • Wavelength 1064nm • Marking field size 110x110 mm • Marking software EZCAD in German / English • Pilot laser (easy preview) • Focus finder (easy focus adjustment) • max. component height approx. 300 mm • marking height approx. 110 mm • Working range approx. 390x240mm • Welded construction made of sheet steel • Connection 230V • Air-cooled • Notebook with cable, Windows 10 (German or English) • Dimensions: 670x 430x 700 mm (LxWxH) • Weight: approx. 55 Kg

Ref.-No. 10010-21-1339 Portable Laser Name of the system Compact ALL-in-one system component for laser processing Portable Marking Laser Manufacturer SH-Germany Model SAL 23 Year of construction NEW Compact ALL-in-one system component for laser processing • Fiber laser 20W (Optional: 30W, 50W) • Laser class 4 • Wavelength 1064nm • Marking field size 110x110mm • Marking software EZCAD • Electrically adjustable Z-axis (working plane adjustment) • Welded construction made of sheet steel • Connection 230V • Air-cooled • Touch IPC with Windows 10 operating system • Keyboard • Dimensions: 1150 x 500x 1500mm (DxWxH) • Weight: approx. 85 Kg • Weight of the portable laser unit 6.8 Kg • Smoke extraction included

Ref.-No. 10013-21-1337 Marking laser SAL 27 Name of the attachment marking laser SAL 27 Manufacturer S-Germany Model SAL 27 Year of construction of new goods The SAL 27 in a flexible allroud talent. Thanks to the three different, manually adjustable axes, inscriptions from small to very large parts up to a height of over one meter can be easily realized. With the swivel axis, the laser head can be positioned in the most difficult places. The SAL 27 is mobile and can be easily rolled onto the workpiece. Product • Fiber laser 30W (optional 50W) • Laser class 4 • Wavelength 1064nm • Marking field size standard 110 x 110mm (optional 150 x 150mm) • Y-axis from 1020 - 1320mm, travel max. component height 1120mm X-axis approx. 250mm travel • Pilot laser (easy preview) • Focus finder (easy focus adjustment) • manually adjustable Z-axis • Touch PC with la ...

Ref.-No. 10017 – No. 21-1417 Described Open Laser System Manufacturer SH-Germany Type LAS 26 Year of construction New LAS 26 The LAS 26 is an open laser system with which small parts and also large, bulky parts can be lasered. Due to the lack of limitation of an enclosure, the dimensions of the workpiece are variable. It is possible to integrate this laser system into an existing system. Product • Fiber laser 20 W (optional: 30 W, 50 W) • Laser class 4 • Marking field size 150 x150 mm • Marking software EZCAD • Pilot laser (easy preview) • Focus finder (easy focus adjustment) • Marking height approx. 330 mm • Electrically adjustable Z-axis (Working Plane setting) • Connection 230 V • Air-cooled • Laptop with Win 10 • Dimensions: approx. 840 x 775 x 700 mm (L x W x H) • Weight: approx. 45 kg

NEAGARI SHIBUYA Radial Forging Machine Model BF-350 New 2010 Specifications 1. Machine components (1) Bar-Forging Machine: 1 set (2) Manipulator: 2 set (3) Hydraulic System: 1 set (4) Electric Power & Control System: 1 set (5) Foundation: 1 set (6) Unloader: 1 set (7) Work Support: 6 set (8) Work Support (center): 2 set (9) Mandrel (IN): 1 set (10) Mandrel (OUT): 1 set (12) Die Changing Unit: 1 set 2. Work Piece 2-1. Material (1) Tool Steel (EX. DIN-X40CrMoV51AISI-H13JIS-SKD) (2) C-steel 2-2. Starting Dimension (1) Round: max. diameter 450mm (2) Square: max. flat to flat 240mm (3) Max. Length: 3500mm (4) Max. Weight: 3000kg 2-3).Forged Dimension (1) Min. Diameter: 80mm (2) Min. Square: 120mm (3) Max. Length: 8000mm (4) Max. Weight: 3000kg 3. Bar Forging Machine 3-1. Forging Ability (1) Number of rams: 4 (2) Force / ram: max. 7000kN (3) Hydrau ...

TECHNICAL DATA SHEET CNC – Gantry gantry milling machine TRIMILL brand Type VF3016 Year of construction 2017 Control HEIDENHAIN iTNC530 HSCI Travel X-axis (longitudinal): 3,000 mm Y-axis (transverse): 1,600 mm Z-axis (vertical): 1,200 mm B-axis (swivel axis milling head) +/- 100 ° C-axis (rotation axis milling head) +/- 240 ° Structure / Axis concept AC servomotors with digital control for all axes Gantry drive of the X-axis Rack and pinion drive in the X-axis, backlash-free due to electrically prestressed, water-cooled motors 2 ball screws each in the Y and Z axes Guides of all linear axes are designed as prestressed roller guides Hydro-pneumatic weight compensation of the Z-axis via 2 cylinders Stationary frame components made of mineral casting, movable main components made of grey or nodular cast iron Double beams in load- and thermosymmetric d ...

It has 3 units, built in 1998

Used dough weigher W&P, Type: Parta U 2002 -Refurbished- - Frequency controlled - completely overhauled - Condition: Very good, ready for immediate use - 6 months warranty - Capacity: 1,230 - 2,840 pcs./h - El. Connection: 3x 230 / 400 V, 50 Hz, 3 / 10 A The machine has been completely overhauled and is immediately ready for use. Viewing and test run are possible by arrangement.

CNC lathe BIGLIA B750 YS TECHNICAL FEATURES: Year: 2015 NC Type: FANUC series 32i-B Maximum diameter Rotation: 680 [mm] X-axis travel: 305 [mm] Y-axis travel: 140 [mm] Z-axis travel: 860 [mm] X-axis fast feed speed: 18000 [mm/min] Z-axis fast feed speed: 24000 [mm/min] Y-axis fast feed speed: 7500 [mm/min] Spindle Nose: ASA 8" Maximum diameter in bar: 80 [mm] Spindle Bore: 91 [mm] Maximum speed Spindle: 3500 [rpm] C-axis indexing accuracy: 0.001 [°] Spindle power: 22 [kW] Spindle torque: 700 [Nm] Counter Spindle Nose: ASA 5" Sub-spindle bore diameter: 55 [mm] Counter-spindle stroke: 895 [mm] Maximum speed Spindle: 5000 [RPM] C-axis sub-spindle indexing accuracy: 0.001 [°] Sub-spindle power: 25 [kW] Spindle torque: 159 [Nm] Max. section Tool holders: 25 x 25 [mm] Number of turret stations: 16 Turret Index Time: 0.3 [s/pos] Number of powered turret statio ...

New KUSING four-sided brush / grinding machine made in Europe. Compact machine with quick adjustment and optional parameters. Technical parameters: Maximum material width: 250 mm Maximum material height: 150 mm Horizontal motor power: 1.5 kW Vertical motor power : 1.1 kW Diameter of the shaft : 40 mm Tool diameter : 200 / 250 mm Minimum possible material length : 250 mm Possible machine versions with 3 spindles KuSING has been manufacturing woodworking machines since 1991. In the field of 4-sided brushing, we offer a wide range of manufactured machines for every application. Parameter changes possible as required. The advertisement was automatically translated. Translation errors are possible.

New brush machine KUSING K2Le-400 Working width 400mm Working height up to 310mm (with brushes Ø 250mm) 2 working heads 2x 4kw Feed speed 2-12 m/min. Suitable for brushes Ø 250mm, L 400mm, D 40mm. Motorized spindle lift. Weight 1100 kg. The machine of the highest and heaviest category, suitable for serial production and heavy work.

Small compact brush machine for companies that are just starting out with brushing. Specifications: Working width 400mm Working height n.a. (or limited by the height of the feeder) 1 working head 3 kW (4kw optional). Suitable for brushes dia.250mm, L 400mm, d40mm. Brush from below, without feed is possible to work manually. Made in Slovakia, EU. Parameters adjustable on request. The price is without feeder and without tools

New brushing machine KUSING K2L-600e, machine manufactured in Slovakia, in Europe by a company with more than 30 years of experience with woodworking machines. Working width 400mm Working height up to 310mm (with brushes Ø 250mm) 2 working heads 2x 4kw Feed speed 2-12 m/min. Suitable for brushes Ø 250mm, L 400mm, D 40mm. Motorized spindle lift. Weight 1250 kg. The machine of the highest and heaviest category, suitable for serial production and heavy work.

Small compact brushing machine for companies that are just starting brushing or are looking for a compact machine for processing heavy wood Specifications: Working width 400mm Working height n.a. (or limited by the height of the feed) 2 working heads 3 kW (4kw optional). Suitable for brushes dia.250mm, L 400mm, d40mm. Brush from below, without feed is possible to work manually. Made in Slovakia, EU. Parameters adjustable on request. The price is without feeder and without tools

2018 Forge from 60 to 400 Ton Forging and Annealing Furnace ATI furnace It is made for heat treatment of steel (originally 100Cr6 steel). Possible customers : automotive suppliers The last heat treatment on this line was made in 2018. For a better industrial usage, the supervision of the line need to be upgraded. The original constructor is FDI (Deleau Furnace), which was bought by ATI Furnace ati furnace nabertherm

Key data: 400 mm, 650 mm, 5000 1/min

Technical data: Manufacturer: Spinner Type: TC 600-65 SMCY Year of Make: 2013 Control: Siemens 840D SL ShopTurn Travel: X 275mm, Y +50/-40 mm, Z 700 mm Switch-on hours: 12,838 h Max. swing diameter: 600 mm Max. turning diameter: 400 mm Max. turning length: 650 mm Max. Rapid Traverse: 15/24 Main spindle Max. speed: 5,000 rpm Spindle passage: 65 mm Chuck size: 210 mm Spindle power: 18 kW Torque: 150 Nm Sub-spindle Max. speed: 6,000 rpm Chuck size: 165 mm Spindle power: 10 kW Torque: 80 Nm Revolver Number of tools: 16 Tool holder: VDI 30 Rotating tools: 16 Max. speed: 6,000 rpm Power (60%): 6 kW Torque (60%): 30 Nm Dimensions and weight Dimensions L/W/H: 2.5m x 1.6 m x 2.0 m Weight: 5,000 kg Condition Condition: Used Functional: Tested and fully functional Other equipment and accessories included: Large panoramic window in the work room Tool  ...

- Infinitely variable speed control - Quickly adjustable drilling depth stop - Thread cutting device - Undervoltage triggers - Table height adjustment via rack - LED lighting in the head - Continuous/normal drilling capacity R1: 23/25 mm - Thread cutting performance (depending on slope) R1: max.M 16x1 - Spindle MK II - Drilling depth 100 mm - Projection 260 mm - Column diameter 110 mm - Usable table surface (W x L) 420 x 340 mm - T-slot size (arm): number 2, distance 125 mm - Speed display digital - Drilling depth display digital - Drill depth stop quickly adjustable - Feed by hand - Motor three-phase current 400 V - Spindle speeds infinitely variable R1 with 20-2,000 1/min Option: Coolant device: € 525,- FACTORY WARRANTY: 3 years DELIVERY: free domicile incl. packaging NOT THE RIGHT MACHINE? WE ALSO CARRY OTHER FLOTT PRODUCTS - ASK FOR A QUOTE! FAS ...

Engel Victory 750/150 Tech (146) without funnel Item number: 146 Availability: In stock Year of construction: 2004 Brand: Engel Specifications Spray weight: 354 g Clamping force: 1,500 kN Screw diameter: 50 mm Spray pressure: 1427(1909) bar Spar spacing: Tie barless mm Clamping plate size: 750 x 850 mm Control: CC200 Language: German Power: 61 kW Operating hours: 98108 h Weight: 9500 kg Dimensions: 5.7 x 2 m Funnel: No Core train: Yes Euromap: Yes

SUMAB R 400 Für Blöcke, Bordsteine, Pflastersteine Produktionsfläche: 1100x500mm Palettengröße: 1200x550 mm Maximale Produkthöhe: 330 mm Mindestprodukthöhe: 40 mm Produktionskapazität in 8 Stunden / 100 %: Hohlblock: 6.912 Stück (20x20x40 cm) Pflasterstein: 550-640 m2 (10x20x6 cm) SUMAB R 400 For blocks, curbstones, pavers Production area: 1100x500mm Pallet size: 1200x550 mm Maximum product height: 330 mm Minimum product height: 40 mm Production capacity in 8h / 100%: Hollow block: 6,912 pieces (20x20x40 cm) Paving stone: 550-640 m2 (10x20x6 cm)

Universal milling machine Lagun from a training workshop in top condition! Head universally rotate, swivel and tilt. Type: FTV2 YOC 2006 Tool holder SK40 Drilling pinole Coolant device Travel X-axis x00 mm Travel Y-axis x60 mm Travel Z-axis x40 mm Milling head type Vertical milling head Speed range 40 - 2000 mm/rev Table clamping surface approx. x00 x x00 mm T-slot size xx mm Feed X-axis xxx mm Feed Y-axis xxx mm Feed Z-axis xxx mm Weight approx. 1,850 kg Further data on request, rest according to photos Special price

Kramatorsk Model KJ1910 serial number 1913 Swing Over Bed: 1600mm Maximum Workpiece Length: 6300mm Maximum Drilling Diameter: 991mm Spindle power: 125.00kW Spindle Speed: 1 - 320 RPM Infinitely Variable power Existing Additional Chuck workholding range: 200 - 1250mm diameter, workpiece weight capacity using two open roll supports: 60,000kg, size range in closed backrest: 200 - 800mm, size range in open backrest: 630 - 1380mm, pressure head speed range: .125 - 500 infinitely variable, pressure head spindle bore diameter: 182 mm, pressure head motor power: 75kW DC, headstock speed ranges: 3, pressure head speed ranges: 2 Machine Length: 22950mm Machine Width: 4375mm Machine height: 2670mm Weight: 101091kg Condition Good

Spot welding guns --- Rated power at 50%ED: 25kVA Short circuit current: 22.5kA Electrode force: 600daN / double stroke Projection: 170mm --- - Electrode arm top-straight E34/25/170g - Electrode arm bottom-straight E34/8/170g --- Welding control: MPS 1036 (5 times, 1 program) --- Spring tension on request --- Warranty 6 months --- Training + commissioning on request --- Spot welding electrodes + spare parts available from stock

Technical DataFeed rate longitudinal/transverse/vertical40000/40000/40000 mm/minRapid traverse longitudinal/transverse/vertical40/40/40 m/minWorking area 1Longitudinal735 mmCross650 mmVertical560 mmGeneralUniversal Machining Centre in monoBLOCK construction; Control: CELOS X with HEIDENHAIN TNC7 Tool changerTool changer planevertical Type of gripperDouble gripper Number of tools60 Max. tool length315 mmMax. tool diameter with occupied adjacent pockets80 mmMax. tool dia. with free neighbouring pockets160 mmFloor space/WeightWeight approx.14500 KgNC swivel rotary tableTable surface Ø650 mmCentre bore 32 mmMaximum load (table centre) 600 KgRotation Speed 5. Axis 20 rpm5. Axes (swivelling range) +/- 120 degree4. Axes (swivelling range) 360 x 0,001 degreeRotation speed max.4. Axis 40 rpmDistance between T-Slots 63 mmNumber of Slots 9Slot width 14 mmIntegrated motor spindle speedMASTER®Drive ...