135,903 used machines on RESALE, but how to find them? Machine Search
Used spiral kneader KEMPER, type: SPL 75 -Refurbished - 6 months warranty - for 120 kg of dough or 75 kg flour - 2 time clocks - Dust cover - Spiral and boiler made of stainless steel - Condition: technically and visually very good - ready for immediate use - Delivery free house insideh. Germany Sightseeing and test run are possible upon request.
Key data: 1600 mm, 3500 mm, 800 mm
For sale is: 1 Piece Used Face and Lace Lathe Manufacturer: Werkzeugmaschinenfabrik Zerbst GmbH Type: DP1 / S3 x 3500 Year of manufacture: 1994 Technical data: Largest turning diameter over bed: 1,600mm Center width: 3,500mm Spindle bore: 100mm Face plate diameter: 1,250mm Total mass of the machine: approx. 24.8t incl. documentation Further pictures and videos can be sent on request. The following things have been renewed/repaired on the machine in the last four years: At the end of 2022, the tailstock was completely overhauled. New bearing and new tip and lubrication. 2024 Cross Support regenerated. Refurbishment of the wedge strips with new sliding coating, snatchers on the guideways smoothed by scraping, Bearing seats of the spindles made smooth, wedge strips in the contact surface and covering surface scraped. Lubrication pump cle ...
used
Diosna SP 240 A DL with 3 bowls -Machine after overhaul - New bearings, new V-belts, new switches, new buttons, - 2 speed - 2 o'clock for 30 minutes - 3 boilers - For 240 kg dough
infeed station, pressing station, jogging station, banding station for up to 2 up production, transport to paternoster delivery table format sizes 1 up production 720 x 235 mm, 2up production 335 x 235 mm Bundle Delivery with Pressing Station
Table diameter 1450mm Max working diameter 1600mm Max height under crosstravel 1000mm Nr. 02 RAM Visualization by DRO 4 axes Good working conditions Machine weight18 ton
Table length: 10.800 mm Table width: 1.000 mm Table height: 200 mm Load capacity: 10 t/m Power motor spindle: 22 Kw Max. speed of turning: 1.700 rpm X Axis travel: 7.000 mm Vertical axis travel: 2.000 mm RAM travel: 1.000 mm Total installed power: 60 Kw Rapid feed rate: 15 mt/min CNC ECS 4801 Chip conveyor
CNC controller: Fanuc 18i-TB Capacity X-axis travel mm: 157,5 Y-axis travel mm: 35 Z-axis travel mm: 464.8 B-axis travel mm: 600 C-axis: 360º (0,001º) Turning length mm: 399 Max. turning diameter mm: ø: 190 Distance between spindle centers mm: 750 Bar work capacity mm: 52 Upper turret Number of tool slots St .: 12 Speed driven tools RPM: 6.000 Drive power driven tools kW: 5.5 / 3.7 Number of upper turrets: 1 Lower turret Number of tool slots St .: 12 Speed driven tools RPM: 6.000 Drive power driven tools kW: 5.5 / 3.7 Milling function: Both Turrets Main spindle Speed spindle rpm: 5.000 Counter spindle Speed spindle rpm: 4.500 Drive power spindle kW: 11 / 7.5 Equipment Chip conveyor Part catcher Workarea light Bar Loader RBK 10016 Working time hours Potencial nominal kVA: 67,2 Basic machine dimensions / weight Length mm: 3.675 Width mm: 2.258 Height ...
M.Bäuerle CAS 52/4 Art; Online folding machine with H+H feeder; 4 folding pockets; 3x Ionosation; Investment table 150cm; Max inlet width 520mm; may also be operated with other investors or upstream systems; Meter reading 4.5 million Online folding system M.Bäuerle CAS 52/4 Art; with feeder H+H; 4 pockets; 3x ionization; feed table 150cm; max.width 520mm; ca be used with other feeders or systems; counter only 4.5 mio.
Used Hamba packaging machine for 75 mm cups. Capacity depending on the product up to 6400 cups per hour. Modernized in 2007.
X axis travel 1000 mm Y axis travel 700 mm Spindle travel 300 mm Table dimension 1.100x842 mm Spindle speed 40-2000 rpm Max power input 10 kW Spindle motor 8 HP Total permissible load on worktable 1 ton Machine approximate weight 15 ton
SCM TECH Z5 5200 CNC woodworking center was built in 2015 in Italy by SCM Group S.p.a. This extremely efficient machine is used for precision machining of wood and wood-based materials (chipboard, plywood, etc.). It enables a number of complex operations to be performed, such as vertical drilling, horizontal drilling, grooving with a saw blade along the X axis and standard milling. The machining process is performed in 5 axes by means of a work head located inside a movable machining station. It consists of a boring head with vertical/horizontal spindles and integrated blade and electro-spindle with automatic tool exchange system. The machining station moves over a work table with suction cups that ensure secure holding of the workpiece during machining. On the inner base of the work table, in turn, there is a device designed for easy shavings removal. Each axis is driven by high-powe ...
Key data: 130 mm, 160 mm, 6000 1/min
CNC lathe ARIX / HUMMER T-42CL + bar loading magazine Robust Nitro + chip conveyor – year of construction 2025 For sale is a modern CNC lathe of the type HUMMER T-42CL (ARIX CNC Machines) including bar loading magazine Robust Nitro. The machine was built in 2025, is in very good condition and is ideal for cost-effective series production. Technical data: Model No.: T-42CL Manufacturer: ARIX CNC Machines (Taiwan) Year of Make: 2025 Spindle speed: up to 6,000 rpm Bar Passage: 42 mm Max. turning diameter: approx. 130 mm Max. turning length: approx. 160 mm Axles: X: 225 mm Z: 235 mm Y: 385 mm Main spindle: Power: 7.5 kW Collet holder: A2-5 Tool Stations: 5 lathe tools + 4 driven tools Total: 8 Lots Machine weight: approx. 3,300 – 3,500 kg Equipment: Bar loading magazine Robust Nitro (automatic material feeding) Live Tooling Suitable for series production ...
Vertical lathe KOLOMNA 1540 T CONVENTIONAL MACHINE READY TO INSTALL Spindle diameter 4.000 mm Working diameter 4.140 mm Max working height 2.060 mm Ram travel 1.250 mm Weight over spindle 100 ton Motor power spindle 100 kW Boring/milling unit included Nr.02 RAM with visualization by DRO Excellent conditions, mechanical really like a new.
Type: Robot 500 Continuous vacuum filler for straight filling and portioning Integrated vacuum pump Double screw Standard double screw housing Program memory for 99 filling programs Portion weight: from 5 to 60.000 g Electric power: 4 KW Machine dimensions in cm: Width: 70 Lenght: 80 Height: 155 Delivery time: after advanced payment machine is generally refurbished and ready for delivery
Table diameter 2.000 mm Working diameter 2.000 mm Machine under retrofit/rebuilding to install CNC Mechanical ready, totally rebuilt.
SHARK 512 SXI evo, semi-automatic electro-hydraulic sawing machine with 4640x34x1,1 mm band, to cut pipes, profiles and beams up to 510×320 mm at 0°. Extremely versatile machine, for cuts between 60° left and 60° right. CUTTING CYCLE: after having positioned the bar, starting the cycle the following operations are performed: vice closing – motor start – head descent for cutting – motor stop – head return – vice opening. CYLCE DOWN UP: Operating in semiautomatic cycle , the new function DOWN makes the head and blade motor stop once the cut is finished with the vice closed, by pressing the UP button the head raises back to its starting point and the vice opens. ASK FOR EVERY MODEL OF MEP MACHINES, WE HAVE THE BEST PRICES IN EUROPE
SHARK 281 CCS (Cut Control System) manual bandsawing machine to cut from 0° up to 60° left. Other than the manual cut mode, the sawing machine can make single cuts without operator, using the head weight control- led by a hydraulic brake: after the cut the band stops. The frame at this point is manually lifted to the position needed in order to reposition the bar to cut . In the version with pneumatic vice (MA) the vice is opened/clo- sed by a manually-controlled valve (optional with pedal control). BEST PRICE IN EUROPE
SHARK 281, manual band sawing machine to cut from 0° to 60° left. A FEW FEATURES: Electric panel (wiring totally identifiable, stand-by, loose-key safety switch, main switch, pole change switch, emergency stop, motor magneto-thermal overload, minimum tension coil, protection against missing phase, low tension safety device (LTSD 24 V).- IP55 control handle. BEST PRICES FOR ALL MEP MACHINES IN EUROPE! ASK FOR A QUOTE
COBRA 352 SX evo, semi-automatic electropneumatic sawing machine to cut aluminium and light alloys using blade with electrowelded hardmetal plates (HM). The machine cuts from 45° right to 45° left and the head tilts from 0° to 45° left so as to make inclined cuts. Sawing machine with controlled single axis microprocessor with the latest generation of controllers for semi-automatic sawing machines designed by MEP. OPERATION: Starting the cycle by means of the relative push-button the following steps are carried out: – the vice closes and the motor starts – the head goes down to execute cut – motor stops – head returns to top position and vice opens. BEST PRICES IN EUROPE FOR MEP MACHINES! ASK FOR A QUOTE
Control CC 100 for ENGEL injection moulding machines
Used 4 flanges fit on a JUNG, HF 50 (R or RD) Scope according to pictures ! ( 4 flanges , . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Siemens Small X-ray / Intraoral Device Heliodent MD with tube SR 60/70/7 0.7 • Before takeover, all devices or systems have been tested on site for their functionality. • The system is located in our warehouse in Freiberg / Germany. It is packed on pallets, professionally lashed and wrapped with stretch film and can be picked up immediately • You buy the system in the "IST" state from the freiberg (EXW), Saxony, Germany, and prepayment. • The sale takes place as "used", EXW Freiberg, Saxony, Germany, to resellers or dealers despite being fully functional without warranty. • The installation and configuration of the system or parts must be carried out by a specialist or technician authorized by the manufacturer! • The offer is subject to interim sale.
Spreading attachment PIETSCH STA 1.7 MW series 2000, capacity 1.7 m3, conveyor belt, tarpaulin folding roof, spreader rubber, drive via vehicle hydraulics, with remote control and support supports. Sale as is or in parts possible.
3000 x 1500mm / 5000w / Siemens 840 - Single Head Technology
Double end tenoner, edge processing machine, scoring motor, chipper motor, electric motor, spindle motor, milling motor -Power: 0.15/0.22 kW 11160/17250 rpm at 133/200 V/200/300 Hz -Shaft holder: Ø 15 x 15 mm -Dimensions: 190/70/H95 mm -Weight: 1.8 kg
Offer via gebr. Suhner Shaft Grinding Machine Rotofera DKM 4 Flexible shaft machine shaft grinding machine grinding Rotofera The 7-speed transmission Speed range: 850, 1600, 2100, 3200, 5700, 8000 and 12000 min-1 (400 V, 50 Hz, 3 Ph, 1.0 kW) Mobile Continuous - Separation of motor and tool guaranteed fatigue-free working Applications - Grinding - Disconnect - Roughing - Milling - De-rusting - Polishing - Brushes For light work, especially stainless steel, boiler and steel construction, polishing workshops, apparatus construction, kitchenand hospital supplies, etc.
Used spiral kneader KEMPER, type: ST 75 A -Refurbished - for 120 kg of dough or 75 kg flour - incl. 2 extendable tank wagons - Condition: Very good, ready for immediate use - 6 months warranty Sightseeing and test run are possible by arrangement.
IMA BFB MS300A collator and stretch bander for cartons Carton Size range: minimum 65 x 20 x 12 mm, max. 160 x 95 x 95 mm Bundle size range: minimum 65 x 80 x 30 mm, max. 180 x 320 x 160-210 mm (push-in width x depth x height) Maximum reel diameter 300mm, reel core diameter 70-76mm Includes discharge rake to remove bundles from the machine (prevents heating the product) Siemens S7-300 PLC with UniOP HMI Capacity up to 40 bundles per minute 6 bar compressed air Footprint 2865 x 1265mm approx. x 1945mm high Weight approx 1500kg.
1 VIRGINO RIMOLDI roll slitting machine type TMF RN160AV. Machine used to obtain tapes of different widths, whether the fabric is wrapped "in line" or on the bias. Cutting system with motorized disc blade and manual feed. The fabric roll is supported by a shaft that enters the cardboard tube where the fabric is rolled on. The shaft is motorized and its rotation is synchronized with that of the disc blade, ensuring a clean and precise cut. Device for sharpening the disc blade. Width of the strips to cut: from 20 to 130 mm. Maximum width of the fabric roll: 1,600 mm. Maximum cutting diameter 230 mm. Diameter of the roll holder bar: 45 mm (for carton tubes of inside diameter 46 mm and outside diameter 50 mm).
Circular saw sharpening machine Vollmer Cne
TECHNICAL DATA: Working width mm: 400 Workpiece length min mm: 350 Thickness mm: 150 No 2 brushing units (Turnable) Total connection kW: 1,83 Weight Kg: 1200
Table version for small cartons Label from above Dimensions: 1,100 x 600 x 600 mm high
Double end profiler, edge processing machine, scoring motor, chipper motor, electric motor, spindle motor, milling motor -Power: 7.5 kW -Speed: 2860 rpm -Voltage: 380 V -Shaft holder: Ø 40/80 mm -Price: per piece -Number: 2 pieces -Dimensions: 675/250/H255 mm -Weight: 98 kg
Double end profiler, edge processing machine, scoring motor, chipper motor, spindle motor, milling motor -Circular saw motor in: flat design -Motor: 1.85 kW 2870 rpm at 50 Hz -Shaft holder: Ø 30 mm -Number: 2x motors available -Price: per piece -Dimensions: 390/120/H185 mm -Weight: 15 kg
Huller thread cutting machine vith hydraulic vice. Thread head from M3 up to M27 Machine is perfect for serial work.
TECHNICAL DATA: Working width mm: 1600 No 2 side brushes Lengthwise brushing unit Horizontal brush Horizontal brush Brush roller (transversal) Weight Kg: 2500 Total power installed kW: 11
Fliss bohrer and thread rolling NC machine. Machine was rebuilded in 2019, complete Hardwere, and pneumatic components, and part from electric. Machine can be used for serial tube production, can be aded Robot for manipulating. Machine will be able to connect with a handling robot for fast delivery and high productiion.
REALMECA MINI C3X-CNC VERTICAL 1 phase machining milling machine Used for teaching begginers. Perfect condition
MAHO MH-700 with numeric control X, Y Table size: 800x300 Working area: X-450,Y-250,Z-300 Spindle taper: MK3 Feed range: 7-250mm/min Vertical head swiveling 90 degreess Power: 3KW Dimensions: 1300x1200x1700
MACHINE IS IN GOOD WORKING CONDITION Machine need center horse and support for the clamp cutting tools. Bj0ie7dcoa Machine Has ben used in Switzerland, after thay realize they need that both suports, they took it off and use on other lathe.
Pacage set of REHM TIG WELDING MACHINE Welding torch 10m welding gun covers 3 different sizes look photos Suitcase for the complete set included Gun for electrode mma welding
Automatic double copy milling machine - longitudinal copy milling machine Manufacturer: Wigo Model: 1075 Working length: Workpiece with straight end faces .. 1300mm Wersktück with rounded end faces .. 1000mm Working width: max. 200mm Working height: max. 130mm Feed continuously 0.5 - 12 m/min Milling units: 2 x 4 KW Hydraulic unit: 1.1 KW Additional 2 milling unit on the right side. Clamping cylinder pneumatic: 2 pcs.
Double-end tenoner, edge processing machine, scoring motor, chipper motor, spindle motor, milling motor -1x motor: 0.15 kW 11160 rpm at 200 Hz -Voltage: 133 volts -Receiving shaft: Ø 15 mm -Tool: Ø 160 x 3.5 mm -Dimensions: 200/85/H70 mm -Weight: 2.5 kg
maximum number of results exceeded
please refine your search
