127,137 used machines on RESALE, but how to find them? Machine Search
Profile belt sanding machine, PS0 Rasprofil from Zimmermann with many accessories Sanding machine with swivel table and additional equipment for rasps. Ideal for use in model making and mould making. For precise grinding of contours. All settings with clamping lever and fine adjustment. Drive motor 400Volt, 1.1kW Table can be swivelled up to 45 degrees forwards and up to 20 degrees backwards Machine table approx. 400 x 400mm Fold-down upper extraction arm for sanding large parts. By snapping the free-standing profile rail into the upper part of the machine, a high angular accuracy can be achieved. Including three profile turning rails 15, 30 and 40mm (straight and radius) In addition, some sanding belts, see photos Three unused rasps. Suction connection 80mm Original paint, dabbed in places CE mark Very well maintained machine from prototype production in the motor ...
Microstep MG 6001.25 PRBG Working Area : 6000mm x 2500mm Kjellberg 360i with automatic gas console With rotator 1 x Autogenous 1 x drilling unit with tool changer Including filter system more information on request
Key data: 2000 kN, 562 g/PS, 55 mm
Specification Injection Moulding Machine Engel VC 1350/200 Tech General data Clamping force: 200 t Year of Make: 2007 Injection unit weight: 562 g Injection Unit .../1350 Screw diameter: 55 mm Specific injection pressure: 2183 bar Injection volume: 618 cm³ Injection unit weight: 562 g Tool clamping unit 200/... Clamping force: 200 t Dimensions of the tool plates: 860 x 570 mm Output force: 80 kN Tool height: 400 mm Opening travel: 750 mm Maximum panel spacing: 1150 mm Discharge stroke: 180 mm Other Specifications Weight: 14200 kg Dimensions (L x W x H): 6.3 x 1.9 x 2.3 m Year of Make: 2007 Equipment 2 x hydraulic core on the moving plate Pneumatic valve Integrated robot 8 zones for hot runners Rotameter 8-fold
Herma's high-performance labeling machine for lid and side labels. Capacity: 100 labels per minute Round cans were labeled with the Herma (400ml). However, it can also be used for any other cans and bottles. The machine sticks the label all around and also on the lid. The machine therefore has several labeling heads, so that the label is simultaneously labeled all around the can/bottle and is also labeled on the lid of the can/bottle. The machine is in perfect working order. The reason for the sale is the change in the packaging of the product.
Bosch VRM 6040 Lid Screwdriver Condition: very good (used) Description: Capper, Can Capper, Can Capper, Can Sealer The machine is high performance and has 4 heads. It can be driven up to 120 pieces per minute, but we drove it to 30 pieces per minute. Currently the machine is set to 400 ml cans from Obeck with (I think 89 mm lid), but the setting can also be changed. The machine has always been serviced and it works perfectly. Capacity: 120 cans per minute The machine is in perfect working order and can also be viewed on site. The only reason for the sale is to change the packaging of our product.
Hook mobile mixing plant with Liebherr ring plate mixer R 0.75. - Dimensions: Length 6.30 m / Width 2.50 m / Height 2.60 m - Weight: approx. 6,000 kg - Mixer: Ring plate mixer from Liebherr, volume 0.75 m³ according to DIN - Conveyor belt with drum motor: center distance 6.0 m, belt width 0.5 m - Electrical connected load: 45 – 50 kW Operation is via wireless handheld transmitter (1st mixer: on/off; 2. Conveyor belt on/off and open/close mixer).
Year of construction 2017 Machine made in Japan! Mazatrol Smooth G Max. turning diameter: 380 mm Jaw spacing: 539.5 mm Max. bar passage: 80 mm Travel X/Y/Z/W 234/100/625/585 mm Main spindle 26/22 kW Max. speed: 4,000 rpm Spindle Nose: A2-8 Sub-spindle 11/7.5 kW Max. speed: 6,000 rpm Spindle Nose: A2-5 12-speed revolver 12 driven tool stations, 5.5 kW Max. speed: 5,000 rpm Tooleye Part catcher for main and sub-spindle Conveyor Bar Feeder Interface 1 set of tool holders, 8 static + 3 driven 15-bar high-pressure pump 1 piece 3-jaw chuck, Kitagawa B210, diameter 254 mm 1 piece collet chuck for counter spindle CE marking Documentation
Mazatrol SMART Control Max. turning diameter: 420 mm Max. turning length: 1,233 mm Travel X/Z: 240/1,350 mm Spindle motor 30 kW Max. spindle speed: 4,000 rpm Spindle nose A2-8 Max. bar passage: 80 mm 12-speed revolver 3-jaw chuck Kitagawa BB210 Conveyor Manuals CE mark Switch-on time: about 4,000 hours
Mazatrol SMART Control Max. turning diameter: 420 mm Max. turning length: 1,233 mm Travel X/Z: 240/1,350 mm Spindle motor 15 kW Max. spindle speed: 5,000 rpm Spindle nose A2-8 Max. bar passage: 65 mm 12-speed revolver 3-jaw chuck Kitagawa BB208 Conveyor Manuals CE mark
Suitable for automatic grinding or re-serration and chamfering of HSS and segment saw blades as well as solid carbide saws with ceramic grinding wheels and deep grinding with CBN or diamond grinding wheels., Accessories:, Total enclosure,, Sawblade magazine with 3 saw blade stacks each with a stack height of 250 mm (for approx. 35 saw blades each) #9007511,, Device for automatic chamfering of sawblades from Ø 145 mm,, Automatic threading of the grinding wheel,, Automatic fire extinguishing system,, Automatic central lubrication,, Coolant system 400 L with coolant tank with filter system,, Machine lamp,, Oil collecting tray,, 3 sawblade mandrels (loader)., Saw diameter: 40-710mm, Tooth pitch: 1 - 55mm, Number of teeth: 2 - 998, Saw blade thickness: max. 8 mm, Grinding wheel diameter: 200x32mm, Connected load: 10kW (400V / 50Hz), mass: about 3200 kg, Dimensions: L x W x H = 1198 x 1750 x ...
Control Mazatrol Smooth G Max. turning diameter 380 mm Travel X/Y/Z: 234/100/625mm Main spindle Max. speed: 4,000 rpm Spindle motor drive power: 26 kW Max. bar passage: 80 mm Tool turret 12 tool stations 12 driven tool stations, 5.5 kW Max. speed: 5,000 rpm More options Prog. Tailstock 3-jaw chuck Kitagawa BB210 Parts catcher Interface for rod magazine Tool holder package, 3 powered holders + 8 fixed holders Coolant high-pressure pump, 15 bar Conveyor
Weinig Profimat 22N ATS four-sided planer Working width 220mm Working height 120mm Number of spindles 5 Spindle system: Bottom 5.5kw Rights Left 7.5kw Top 5.5kw Bottom 4kw Feed speed adjustable via variator 6-22m/min Feed motor power 2.2kw Height and width set via controller Input table length 1970mm
Inv. Num. : 8602 Type: W 9 Producer: TOS Created: 1975 Parameters: Work table length: 950 mm Work table width: 950 mm Maximum weight of the workpiece: 3000 kg Spindle diameter: 90 mm Maximum spindle speed: 1800 1/min X-axis travel: 1250 mm Y-axis travel: 900 mm Z-axis travel: 900 mm Machine weight: 11000 kg Equipment: DRO
Long bending machine, with the following equipment: - 1 sharper rail 20°, offset, radius 1 mm for the upper beam - 1 insert rail 10/100 mm and 14/100 mm each for the bending beam - 2 foot switches for 2-man operation - S-Touch control with graphical profile display - 21.5" LCD touch color monitor with high-resolution graphics - Motorized depth stop 8-1000 mm - F-Geometry - within the EU with 32 amp plug with 5 m cable Machine has been repaired, checked, cleaned by a professional and is fully functional. Test run was carried out. Working length: 4040 mm Sheet thickness max. steel: 1.5 mm Sheet thickness max. aluminium: 2.0 mm Sheet thickness max. VA: 1.0 mm Back gauge (min.): 8 mm Back gauge (max.): 1000 mm Colour: blue/grey Total power requirement: 400 V Dimensions: 5325 x 2232 x 1924 mm Weight: 5000 kg Upper beam stroke (opening width): 140 mm Plate thickness ...
max. format 78 x 120 cm Year of construction 2012 Fully Automatic Paper Folding Machine Computer control with touch screen Navigator Control Pallet feeder with Vaculift and Vacubelt 4 fold pockets in the parallel fold section Automatic folding pocket adjustment Automatic folding roller adjustment Knife shaft cassette 2 folding swords in the crossfold section Automatic folding blade adjustment 1 more fold pocket after the 1st cross break Palamides alpha 500 Stacking Delivery Delivery date: immediately from stock Price on request. We supply and install worldwide.
Mobile labeling machine for round bottles. Machine incl.: hot stamp system , 3-roller system. PLC: SIEMENS Simatic S7-300 Label dispenser type Pagomat 15/120E.
Milling Depth:110mm Milling spindle speed:12000rpm Max. milling paths: 290 x 120mm Diameter of the copy pen: 5mm and 8mm Compressed air connection:6-8bar Weight:200kg
MOST MWOS-A5 tank welding machine was built in 2023 in Poland by RYWAL-RHC Sp. z o.o. This highly versatile machine is designed for fully automatic welding of industrial products, i.e. machine parts, pressure vessels and heat exchangers. Circumferential, angle and full-value longitudinal joints are performed by means of two reliable torches in the MIG/MAG method. This solution significantly increases production efficiency, while maintaining the repeatability of the process. All this is complemented by the advanced MCS-X control system with an intuitive interface, which enables the creation of entire production processes in just a few steps. The MOST MWOS-A5v02 circumferential welding machine weighs 3200 kg. Technical specifications of the MOST MWOS-A5 circumferential welding system - working length: 4500 mm - maximum workpiece diameter: 1500 mm - maximum workpiece weight: 5200 kg ...
Key data: 465 mm, 1050 mm, 3500 1/min
Specifications: Manufacturer: Gildemeister Type: CTX 510 Year of Make: 2006 Control: Siemens 840D ShopTurn Travel distances: X 300 mm, Z 1,050 mm Working spindle Speed: 3,500 rpm Spindle bore: 95 mm Rotary diameter: 465 mm Deh length: 1,050 mm Tool/movement Tool turret: 12-speed Tool holder: VDI 40 Circumferential diameter: 680 mm Dimensions and weight Weight: 7,500 kg Condition Condition: Used Functional: Tested and fully functional Other equipment and accessories included: Tailstock Conveyor automatic door Three-jaw chuck 315
Tool holder: MK 2 Drilling capacity in steel: 18 mm Rotational speeds of the drilling spindle per minute: 220/ 290/ 440/ 720/ 950/ 1450/ Weight: approx. 300 kg
Honing machine, SUNNEN ML3500, (like ml5000 ml2000 ec3500 ml 5000 ml 2000), this machine is currently under complete electronic retrofit (Siemens), Touch screen. Loader interface possible
Inv. Num. : 8609 Type: 1600 KOMBI Producer: NESSAP Generated: Parameters: Control system: NESSAP Software: WRYKRYS Work table length: 3000 mm Work table width: 1500 mm Minimum sheet thickness: 0.5 mm Maximum sheet thickness when cutting: 100 mm Plasma Source: Cebora 160A Cutting speed: 12 m/min
on behalf of a customer GUK Folding Machine FA 21/4 Cartonac 2000-2 further information on request
Key data: 3 mm, 3000 mm, 130 m/min
One used Ravni starigtening and cutting machine for 3.0 to 8.0mm wire. Cutting length: 3.000mm Machine is equipped with double pay off for 3 t spools and dust abstructor Year: 2014
This offer is aimed exclusively at entrepreneurs within the meaning of § 14 BGB. The price is net plus 19% VAT. Manufacturer: LECHNER Maschinenbau e.K. Type: 3100/110 Year of Make: 2020 Voltage: 400V Power consumption: 1.5 kW Power connection: 3 phases, zero, PE Upper roller diameter: 60 – 100mm Maximum working length: 1100mm Nominal capacity: 3.2mm (sheet thickness) Feed: 5m/min All information is made to the best of our knowledge, errors excepted. The sale is subject to exclusion of any warranty. The exclusion does not apply to claims for damages arising from grossly negligent or intentional breach of the Seller's duties or to any injury to life, limb and health. Further legal Information can be found on the website of Witzenmann GmbH under the keywords "Imprint", "Terms and Conditions" and "Data Protection".
Pile cutter Ideal 4850-95 EP; cleaned and tested; Cutting width 475mm; insertion depth 450mm; Insertion height 80mm; Program memory; 2.Knife. Guillotine Ideal 4850-95 EP; cleaned and checked; Cutting Length: 475mm; Insertion depth 450mm; cutting height 80mm; program control; secound knife.
Eyelet machine 3 head, can be converted to 1, 2 or 3 heads.
Key data: 500 mm, 400 mm, 400 mm
FP 4M lid with 3-axis active digital display, Table clamping area 800 x 460 mm Travel X / Y / Z 500 / 400 / 400mm Spindle speed 50 - 2500 rpm Feed rate 8 - 630 mm/min Rapid traverse 1500 mm/min Quill stroke 90 mm Tool holder SK 40 Hydraulic Tool Clamp Incl. accessories as shown
Cevenini Log Cutter Model M200 1.5m wide x 200 mm diam. Complete with motor
used
PET machine for items up to 1.5 ltr. Equipped for PCO 1881. Moulds in 500 - 750 - 1,000 - 1,500 ml optionally available. Voltage 400V 50Hz. Power for bottles in 1,500 mL. 21,115 per hour. Machine can be viewed in operation
Offer 25248 Specifications: - Drilling capacity in steel ST 60 45 mm - Drilling capacity in steel ST 60 55 mm - Drilling spindle holder MK 4 - Drilling spindle stroke 200 mm - Drilling spindle speeds infinitely adjustable 60 – 1600 rpm - Right - Counterclockwise rotation - 3 Feeds electr. Magnetic indentation 0.1; 0,16; 0.25 mm/rev - Projection 360 mm - Max distance drilling spindle – table / base plate 775 / 1255 mm - Table with 2 T-slots 630 x 540 mm - Height adjustable via rack with hand crank - Drive 400 V / 2.7 / 4.0 kW - Space requirement approx. W 800 x H 2100 x D 980 mm - Weight approx. 750 kg - with: - Machine vise - Keyless chuck 1 - 13 mm - Emergency stop button -Lighting
Inv. Num. : 8618 Type: FTC 350 XLS Producer: FEELER Created: 2014 Parameters: Control System: FANUC Series Oi-TD Switch-on hours: 9330 h Hours: 7081 h Maximum turning length: 870 mm Max. turning diameter: 350 mm Maximum turning diameter over bed: 630 mm Number of Spindles: 2 pieces Maximum spindle speed: 4500 1/min Equipment: Chuck
Grinding area: 600 x 400 mm Magnetic table Coolant tank various grinding wheels
Sidel SBO 6 series 2 manufacturing year 2000 with full upgrade by Sidel 2024 Capacity 7.800 bph Set for quick change molds Personnalisation for preform neck 29/21 Machine equipped with: Sidel preforms tipper Sidel preforms hopper & feeder Sidel Caterpillar oven & blowing wheel for 6 molds Solenoid valves Sidel Universal type Retrofit of elongation sensor PCC Sidel version V2.02 Sidel electrical cabinet Machine in production till end November 2025 Excellent blowing machine
Kosme KSB6R rotative PET blow moulding machine manufacturing year 2008 with full upgrade by Kosme in 2024 with linear oven and 8 heating modules rotative blowing wheel for 6 quick change molds personnalisation for preform neck 21/29 Machine equipped with: -pallet preform tipper and hopper -preform elevator & conveying system, -preform unscrambler & preform infeed rail -Kosme linear oven & rotative blowing wheel -Kosme machine control by touch screen& drive -Kosme electrical cabinet Machine in production till end November 2025 Excellent machine and opportunity
KHS InnoPET Blomax 8 blow moulding machine Manufacturing year 2009 Capacity 14.400 bph Set for 8 quick change molds Personnalisation for preform neck 29/25 still mineral water Linear oven equipped low consumption Machine composed by: - preforms pallets tipper, hopper & feeder - PCC drive & control - KHS electrical cabinet - HP air recycling system The full air conveyor system EZS is available in option. Machine very well serviced is in exceptional condition. Machine in production till end June 2026
Twinpack automatic handle applicator model MGE Manufacturing year 2010 Setting handles on shrinked bottles packs Capacity up to 50 packs per minute Siemens S7 machine drive CE control panel Machine in very good condition Recently dismantled and now stored dry and clean in warehouse Available immediately
Set of blow molds for PET blowing machine Sidel SBO Universal - 10 molds HR for heat resistent bottle 1.0 litre - 10 molds for standard bottle1.0 litre Molds were used to produce PET bottles for juices Low working hours Molds are n very good condition Available immediately Can be customised
max. format 54 x 72 cm Built in 1960 Inking unit not complete for punching / embossing Price on request. We supply and install worldwide.
Grinding wheel dimensions (od x id x width): 508 x 304.8 x 160 mm, Ø min/max to be rectified: 1.5 / 75 mm, Regulating wheel width: 160 mm, Regulating wheel dimensions (od x id x width): 304.8 x 190.5 x 160 mm, Grinding wheel width: 160 mm, Maximum length to be rectified in plongeé: 160 mm, Grinding wheel head motor power: 11 Kw, Long: 2.015 mm, Width: 1.280 mm, Tall: 1.440 mm, Weight: 3,000 Kg approx.
CLAMPING FORCE: 150TON PLATEN SIZES: 1295 X 990 DBTB: ROTARY TABLE 1520 MIN MOULD HEIGHT: 300 MOULD OPENING STROKE: 400MM MAX DAYLIGHT: 700MM SCREW DIAMETER: 40MM INJECTION PRESSURE: 2678BAR STROKE VOLUME: 283CM3 SHOT WEIGHT (P/S): 257GR CONTROLS: UNILOG B6 MOTOR: 22KW HEATING CAPACITY: 12.1KW SCREW DRIVE: HYDRAULIC CORE PULLING: 4 AIR VALVES: 1 HOT RUNNER: 8 ZONE INTERGRATED ADDITIONAL: HORIZONAL INJECTION VERTICAL CLAMP
Marel / Townsend Revoportioner Type: TRP630 Serial number: 10098176 Year of construction: 2012 Belt width: 630 mm Compressed air: 8 - 10 Bar, 200 Nm³/h Water: 2.5 - 3.5 Bar Power: 3 x 400V, 50Hz, 5kW Dimensions: 1850 x 1700 x 1700 mm Weight: 1000 kg Risco vacuum filler Type: RS505CP Serial number: C809047 Year of construction: 2010 Pump capacity: max 8000 kg/h Filling pressure: up to 40 Bar Hopper: 350 litres Power: 3 x 400V, 50Hz, 8kW Dimensions: 2100 x 1200 x 2250 mm Weight: 1010 kg With lifter for 200L tote bins
Offer 25269 PVC – Gas Strip Sawing Machine Specifications: - Saw blade speed frequency-controlled for very fine sawing - Saw blade diameter 200 mm -Auto. Workflow - Press stop with SICO counter to adjust the glass contact pressure - -simulation - Pneumatic connection 6 bar - Drive 400 V / 0.8 kW - Space requirement approx. W 400 x H 1200 x D 700 mm - Weight approx. 80 kg - Machine stand
Offer 73066 Specifications: - Sanding belt dimensions approx. 2000 x 150 mm - Surface grinding opening approx. 560 x 150 mm - Sanding belt speed approx. 30 m/sec. - Contact washer B 150 / D 200 mm - Drive pulley B 150 / D 200 mm - Drive 400 V / 3 kW - Working height adjustable - separate mot. Dust extraction - Space requirement approx. W 750 x H 1050 x D 1500 mm - Space requirement para. approx. W 750 x H 1250 x D 750 mm - Weight approx. 180 kg
Key data: 600 kN, 132 g/PS, 35 mm
Arburg 320C-600-250 Injection Moulding Machine (241) Ability to work vertically Number: 241 Availability: in stock Year of production: 2008 Producer: Arburg Condition of Injection Molding Machine: Used Screw diameter [mm]: 35 Injection weight [g]: 132 Injection pressure [bar]: 1820 Clamping force [kN]: 600 Gap spacing [mm]: 320×320 Panel size [mm]: 446 x 446 Min. mould height [mm]: 200 Control Type: Selogica Tongue: German Installed power [kW]: 23.9 Working hours [h]: 74753 Weight [kg]: 2330 Dimensions [mm]: 3500×1500 Feed hopper: NO Robot Socket: Yes Core String: 1x
ENGEL ES 1350/350 HL injection moulding machine was built in 1995 in Austria by ENGEL AUSTRIA GmbH. The machine, which is designed for the economical production of plastic parts, is distinguished by the use of many components with excellent technical parameters. These parts are produced using the reliable injection moulding method, which involves feeding plasticised plastic into a mould and then clamping it with high press force. A precision mould clamping system, operating at a maximum force of 350 tonnes, guarantees high repeatability and quality of the manufactured parts. Once the production process is complete, the robot automatically transfers the finished products from the workspace to a conveyor belt. The ES 1350/350 HL injection moulding machine weighs 5000 kg. Technical specifications of the ENGEL ES 1350/350 HL injection moulding machine - CNC controller: ENGEL - maximum m ...
ROMACO NOACK BLISTER PACKING LINE --- 1) BLISTER PACKING MACHINE ROMACO NOACK, MODEL N921 Year of construction: 2010 Rotary sealing machine. With the latest servo technology, and the best tool-free changeover times in the industry. CHARACTERISTICS • Carton output: 400/min. (max) • Forming cycles: 100/min. (max) • Blister output: 500/min. (max) Compatible products: Tablets, capsules, soft gels, caplets, child-resistant/senior-friendly packs, coldform aluminum, multi-layer lidding materials • Foil width: 210 mm (max) • Forming depth: 12 mm (max) Reel diameter forming foil: 700 mm (max) • Reel diameter lidding foil: 280 mm (max) • Carton size (A/B/C): 120/95/210 mm (max) ---- 2) UHLMANN CARTONER, MODEL C150 Year of construction: 2010 Cartoner for big industrial production as well as in smaller, less equipped factories. with GMP-compatible pharm ...
maximum number of results exceeded
please refine your search
