machines for food used for sale

-SPGM Arburg 570 C 2000-800 • YOC 2007 • 55mm auger • 2 core pulls • GID interface • Sealed in January, the SGM is completely dry.

Fully automatic double blasting machine Rösler, automated by industrial robots, blasting chambers each with 2 blowers, each with 2 loading and unloading boxes, built in 2011, incl. wet separator (not visible in the photos)

The machine is in good technical condition, testing is possible by prior arrangement.

The machine is in good technical condition, testing possible after prior agreement. Swing diameter over bed: 630 mm, max. turning diameter: 350 mm, max. turning length: 870 mm, spindle passage 52 mm.

Belt sander from MAFAC ; TYPE K 100 BJ 1979 and a double sander from BOSCH, incl. replacement sanding belts Auction-ID: A1-46862-15

able dimensions ( x-y/mm) 6500 x 1800 Stroke ( X/mm) 6210 Stroke ( Y/mm) 3440 Stroke ( Z/mm) 1103 Type of controll heidenhain Number of spindle per minute 35 - 6000 Tool magazine yes Number of inserts in the tool magazine 60

used spiral mixer Oase SPK 75, good condition, checked and tested, runs perfectly, for 75 kg flour, with 2 clocks, stainless steel kettle, stainless steel spiral, with new lid, motor newly stored, 6.6 kW, machine no. 910707

Excellent condition - Fully operational - Loading / Transport possible!

Excellent condition - Fully operational - Loading / Transport possible! Cutting width 1150 mm Insertion depth 1150 mm maximum insertion height 165 mm With additional cutting knives

Excellent condition - Fully operational - Loading / Transport possible! CNC automatic lathe MIYANO ABX-51TH2 FANUC Series 16i-TB (2009) Cutting hours 5280 h Turning diameter 125mm Bar diameter 51 mm Chuck diameter 150 mm X-1 axis travel 190 mm Z-1 axis travels 257 mm Y-1 axis travels +/- 40 mm X-2 axis travels 190 mm Z-2 axis travels 500 mm X-3 axis travels 190 mm Y-3 axis travels +/- 40 mm Z-3 axis travels 650 mm Spindle speed 5000 rpm Bar pitch 52 mm Main spindle motor 15 kW Sub spindle motor 11 kW Number of toolholder stations 12+12 Tool holder speed 4000 rpm Automatic bar feeder LNS SPRINT 552-565 (2009)

Excellent condition - Fully operational - Loading / Transport possible! Machine for precise cutting of wallpaper Accuracy Y max 0.068 mm Automatic camera edge control 0.1 mm accuracy Speed up to 18 m/min maximum cutting width 170 cm With compressor and computer Accessories: various guide rollers

Excellent condition - Fully operational - Loading / Transport possible! Closing Force: 35 t Screw diameter: 18 mm shot weight: 20 g injection pressure: 1255 bar injection volume: 76.5 ccm clearance between columns: 280 x 254 mm max dimensions of the table plates: 425 x 400 mm ejector: hydraulic Closing System: Hydraulic control:Procan Alpha 2 hybrid machine: high-speed, energy-saving, very quiet Air Valve X 2 the main engine of the machine - servomotor controlled by an inverter Pump / motor: 7.4 kW heaters: 5.8 kW total: 13.2 kW Dimensions 2360 x 810 x 1940 mm Weight: 1310 kg

Excellent condition - Fully operational - Loading / Transport possible! Grinding aggregate with grinding wheel diameter 150 mm brush disc diameter 150 mm main motor 1.6 kW grinding and brush speed 600-1500 RPM Mobile Chassis Connection 400 Volt

Excellent condition - Fully operational - Loading / Transport possible! control: FANUC Series 18-T, + bar feeder BREUNING 3000mm, + machine documents (manual), + chip conveyor (approx. 5 years old), + measuring arm on main and counter spindle, main spindle, counter spindle, 2x Revolver 12-Fold (Driven), ool holder: BMT45, collet chuck 185E (main spindle), wedge bar chuck SMW KNC-S N170 (counter spindle), Speed Main Spindle 4500 rpm, Speed Counter Spindle: 4500 rpm, max. turning diameter: 130 mm, max. turning length: 160mm, longitudinal movement Z-axis: 200mm, longitudinal movement X-axis: 180mm Dimensions: 3100 x 2200 x 2000 mm (machine) 4100 x 1200 x 1700 mm (loader)

Mosca RO-MP-K Condition: overhauled, serviced, cleaned, fully functional, ready for use Equipped for 5 mm PP strapping Tape insertion into frames automatically With heat-wedge welding With automatic release With packet height detection (photocells) Documentation: Operating instructions, spare parts catalogue and electrical diagram available

Chiller - Eurochiller GCA9 / Very good technical condition Cooling capacity 13.3 kW Refrigerant R407C The device has: - Compressor - Separate container for medium - Circulating pump - Heat exchangers - Radiator - Fan x 1 The device after maintenance, fully functional 3-month operation warranty in Poland

EDM machine Mitsubishi FA20 The rear door seal needs to be replaced A complete service must be done after relocating the machine, adjusting axes According to the Mitsubishi Service Center, costs approx. 2,500 €

Chiller - MTA TAE EVO 161 Cooling capacity 55 kW Refrigerant R410A The device has: - Compressor x 2 - Separate container for medium - Circulating pump - Heat exchangers - Radiator - Fan x 2 The device after maintenance, fully functional 3-month operation warranty in Poland

Lathe Hurco TM8i no defects , energized

Table dimensions ( x-y/mm) 3000 x 6000 Stroke ( X/mm) 7000 Stroke ( Y/mm) 3200 Stroke ( Z/mm) 1500 Type of controll heidenhain tnc 640 Number of spindle per minute 18000 Chuck connection hsk a 63 Type of head universal automatic bi-rotary Advances 50.000 mm/min Tools connection iso 50 Height ( x/mm) 5380

For particularly high PVC or aluminium profiles Milling cutter diameter 250 mm Milling width: 305 mm Milling depth: 200 mm Pneumatic workpiece clamps Manual feed weight: approx. 300 kg

Key data: 3 mm

Max. sheet thickness: 3 mm steel Roller center distance: 125 mm Largest radius: 500 mm Stepless speed adjustment via handwheel Clockwise and counterclockwise rotation Hydraulic infeed via foot switch Weight: approx. 550 kg Other tools on request

Milling cutter diameter 250 mm Milling width: 305 mm Milling depth: 160 mm Pneumatic workpiece clamps Manual feed Weight: approx. 200 kg

Manufacturer: KEMPER Drives/motors: HEW Herford + ABM Greiffenberger Main Engine Type: RR 160L/84 S Country of manufacture: West Germany (Germany) — a machine probably from the 80s/90s. Type: spiral bakery kneader with fixed bowl Controls: 2 speeds Automatic cycle Timer emergency STOP

Single Head Corner Welding Machine

Excellent condition - Fully operational - Loading / Transport possible! Boring diameter 4 - 60 mm throat 1,250 mm Workpiece height max. 500 mm spindle taper MK5 surface area of base 2000x980 mm clamping range of table 640x500 mm Turning Speed Range 25 - 2000 rpm total power requirement 6.5 kW

Rotox Water Slot Mill

Excellent condition - Fully operational - Loading / Transport possible! Table size 800 x 400 mm Table load capacity 700 kg Grinding wheel size ø355 / 305 x 38 x ø 127 Magnetic plate dimensions 800 x 400 mm Travel x: 950 mm, y: 440 mm Max. workpiece weight 47.5~547.5kg Feed rate 0 - 1500 rpm Spindle motor power 20 HP with magnetic chuck

Key data: 320 mm, 305 mm, 5000 1/min

FANUC i Series Control 12-station turret (not driven) Travel X= 175, Z= 330 mm Bar Passage 51 mm Tailstock Chip tank IEMCA BOSS 545/32 E Bar Feeder

Excellent condition - Fully operational - Loading / Transport possible! Technical details turning diameter 340 mm Turning length 250 mm serial number 03105116 X-Motion 260 mm Z-Motion 520 mm Read off working hours 33,619 h Read off operating hours 45,618 h C-axis simultaneously controllable No Accessories included Yes Integrated C-axis No control OKUMA OSP-U100L number of controlled axes 2 Spindle Bore 62 mm tool taper VDI 40 Turning Speed Range 45-4500 rpm

Max. pipe extension length: 3,000 mm 4-fold bending angle preselection with digital display up to 180° Working area 6 to 38 x 5 or 48.3 x 3.25 mm Includes pre-assembly device with hydraulic cylinder Deburring unit for tubes inside and outside from 6 - 48.3 mm Tools included: Bending mandrels: 35 x 2, 28 x 2.5, 22 x 2, 42.2, 18 x 2, 28 x 2 Bending shoes: 42, 38, 35, 18, 30 ZD, 16-R 35, 22 R 45, 20-2 XD, 25-2 XD, 28 R 55 Weight: approx. 600 kg

Excellent condition - Fully operational - Loading / Transport possible! Travels X-400 mm Travels Y-300 mm Travels Z-250 mm Workpiece dimensions 700x650x250 mm Travels U/V 120x120 mm Taper angle +/-30º - 87 mm Wire diameter 0.10-0.33 mm

EMAG VTC 250 Vertical lathe GENERAL Project No.: 906007 Quantity: 1 pcs. Manufacturer: EMAG Type: VTC 250 Control: Siemens 840 D Year of Make: 2008 Condition: Used machine Layers Machine Approx (Hrs): 2 Layers DESCRIPTION TURNING Max. turning length 630 mm Max. chuck diameter 200 mm Max. speed main spindle 5000 1/min Max. power main spindle at ED 10-40/100% 38/29 kW Max. torque main spindle at ED 10-40/100% 250/200 Nm Full-clamping cylinder on the main spindle Tailstock NC-controlled Revolver left Number of stations/powered by 11/11 Tool holder in the VDI 40 turret Axles in the turret X/Z Max. rapid traverse speed in X/Y/Z 30/-/40 m/min Revolver right Number of stations/powered by 11/11 Tool holder in the VDI 40 turret Axles in the turret X/Z Max. rapid traverse speed in X/Y/Z 30/-/40 m/min OTHER EQUIPMENT Tool measurement using lasers  ...

Inv. Num. : 6826 Type: TruLaser 3030 Producer: Trumpf Created: 2010, GO 2020 Parameters: Laser ON: 74680 Beam ON: 29226 Laser power: 6 kW Work table length: 3030 mm Work table width: 1500 mm Source: TruFlow 6000 Equipment: Cooling Suction

Key data: 2000 mm, 360 , 55

- Top condition - 570 C 2000-800 - YOC 2007 - 55 Snail - 2 Core moves - GID interface - Only sealed in January, the SGM is completely dry.

Inv. Num. : 9144 Type: Bylaser 4400 Producer: Bystronic Created: 2010 Parameters: Laser power: 4.4 kW Work table length: 4000 mm Work table width: 2000 mm Maximum table load (uniform): 1760 kg Maximum sheet metal cutting thickness (steel): 20 mm Number of tables: 2 Equipment: Impulse cutting Donaldson 5.5 kW Suction

KRONES Contiform 312 – PET Blow Moulding Machine (Year 2019) High-performance PET blow moulding machine designed for efficient production of PET bottles for beverage applications. The KRONES Contiform 312 features advanced 3rd generation blow moulding technology, combining high production capacity, energy-efficient infrared heating, and servo-driven stretching for precise bottle quality. The machine is currently still under power and available for inspection. General Information Manufacturer: KRONES Model: Contiform 312 Year of Manufacture: 2019 Condition: Still under power Documentation: Manuals available Technical Specifications Production Capacity: 24,000 bottles per hour Blow Moulding Cavities: 12 Bottle Neck Finish: 38 mm Conversion to 28 mm neck finish possible by buyer Bottle Formats / SKU Volumes: 235 ml 780 ml Operating Data Working Hours: approx. 5,300 ...

PFAUTER PE 150 Hobbing machine GENERAL Project No.: 906008 Quantity: 1 pcs. Manufacturer: PFAUTER Type: PE 150 Control: Siemens 840 D powerline Year of manufacture: 1991/2009 Condition: Used machine Engine Approx (hrs): 33500 DESCRIPTION GEAR CUTTING Max. head circle diameter 150 mm Carriage stroke Z'-axis 200 mm Travel in X 150 mm Module 1-3 mm Bevel angle +30 to/to -45 degrees Max. tooth width 150 mm Max. diameter hob 130 mm Max. length of hob 220 mm Tailstock OTHER EQUIPMENT Splash protection cladding with fully encapsulated working area Lighting in the work area Electrostatic oil/emulsion mist extraction system Chip conveyor Engine is/was operated with oil Coolant Setup Circumferential Parts Storage Belt GENERAL TECHNICAL DATA Mains fuse 100 A Total power requirement 49 kVA Machine dimensions (LxWxH) approx. 5820x4047x2810 m ...

Milling machine Mikron WF 21C Year of Make: 1996 Technical data X-axis: 400 mm Y-axis: 400 mm Z-axis: 400 mm Clamping table Vertical clamping surface: 300 x 450 mm Number of threaded holes: 2 x 6 Auction-ID: A1-46872-37

This inverter model has the latest functions and features to successfully complete welding work. The inverter is user-friendly and efficient and thus a valuable addition to the workshop of the professional welder or solder. The high-frequency ignition on this inverter makes it possible to use the device without having to stroke the electrode during stick welding. The robust handle also gives you more grip during heavy work. In addition, this makes it a lot easier to take the tool with you for working on location. The inverter housing is also extremely strong, so vibrations and even unexpected contact with other devices or components do not have a negative impact on operation or durability. Auction-ID: A1-40256-138

Hobart CE 100 Planetary mixer / meat grinder including accessories. Viewing by appointment. Auction-ID: A1-40256-120

Technical details Manufacturer: CEM Model: PBF 26P Type: Pneumatic resistance spot welding machine Power: 25 kW Duty cycle: 20% Configuration: - Pedal-operated system - Dual copper welding arms - Pneumatic actuation - Water-cooled electrodes and arms Equipment: - Foot pedal - Adjustable weld cycle controls - Adjustable amperage controls - Cooling and ventilation system Application: Resistance spot welding of sheet metal components in industrial fabrication and workshop environments Condition: Used Auction-ID: A7-40834-5

DOOSAN VCF 850 LSR II is a multi-purpose, vertical machining centers suitable for a wide range of applications. 1993 working hours (like new)

Oxy-fuel cnc cutting machine. Prestine condition.

Manufacturer: LAIP Model: 198-HT Type: High Temperature Yarn Dyeing Machine Year of manufacture: 2008 Condition: Used, was working before dismantling TECHNICAL SPECIFICATIONS - Package diameter range: 1760 to 3000 mm - 2 sets of carriers, each set with 2 carriers - Spindles for 21 cm diameter packages - 64 bobbins per level - Total PES dyeing capacity: 1,300 kg - Control system: 777 Setex controller - Designed for synthetic yarns, primarily PES (polyester Find more here - / Contact us at -

Rebord (Samed) Darix 46/100 semiautomatic casemaker year 2015 Size max. 46 x 100cm hot melt gluing weight 800 kg good condition

We are offering for sale a complete used longitudinal beam welding line, comprising the following equipment: MACHINE 1 - TACK WELDING DEVICE - Manufacturer: Wehling - Type: Heftvorrichtung Langsträger - Year of Construction: 2015 - Power: 0.25 kW + 28 x 0.06 kW - CE Marked: Yes Technical Specifications: - Maximum beam length: 13,700 mm - Beam height range: 70 to 500 mm - Flange width: 150 mm and 120 mm (after conversion) - Flange thickness: 5 to 20 mm - Web plate thickness: 5 mm (to DIN 2768-1 tolerances) - Tack position: trough position, 45 degrees - Changeover time per beam pair: max. 10 minutes - Total unit length: 14,300 mm - 28 servo motors for individual height adjustment of beam supports - Rotatable base frame: 0 to 45 degrees - Permanent magnet clamping of the top flange - Siemens S7 control system - Touch screen operator interface - NC axis with programmable software switch ...

Rebord (Samed) Darix Evolution Pos semi automatic casemaker year 2017 automatic board feeder Size max. 46 x 90 cm hot melt gluing Weight 1.600 kg good condition

Hebrock K34 Edge thickness up to 8mm PLC Screen Control with 15" Touch Screen Pre-milling unit for attaching in front of the gluing part (3mm) Glue basin with alternating basin and adhesive spout device Edge height max. 60 mm Cross-cut unit Milling unit flush/radii/chamfer milling Corner Round Unit Radi/Chamfers Multiradius scraper blade /R1/R2) Nesting Wing Scraper Release agent spraying device Year of Build 2023, 52 Hours Machine is MINT in TOP CONDITION From joinery liquidation / retirement from the carpentry workshop

Key data: 11000 kN

ENGEL DUO 1100 T injection moulding machine – ES16050/11000 – ENGEL robot included For sale: ENGEL large-tonnage injection moulding machine model ES16050/11000 DUO, designed for demanding industrial production and large technical parts. Machine in very good working order, fully operational. General information • Manufacturer: ENGEL • Model: ES16050/11000 DUO • Year: 1999 • Type: Injection Molding Machine • Condition: Very good condition (used) • Operation: Fully functional • Hours of service: 86,200 hours Technical characteristics • Clamping force: 11,000 kN • Screw diameter: 150 mm • Injected volume: 10,955 cm³ • Injection pressure: 1,330 bar • Column diameter: 230 mm • Opening stroke: 1,800 mm • Ejection force: 215 kN • Ejector stroke: 300 mm Dimensions • Plate dimensions: o Width: 1,400 mm o Height: 1,150 mm • Total weight ...