128,431 used machines on RESALE, but how to find them? Machine Search
Pallet stretch-wrapper PIERI Speed 100 pallets/h Control SIEMENS S 7
TIPPER TIE TECHNOPACK KDCNV semi automatic double Clipper
TIPPER TIE TECHNOPACK TCNV-200 BT pneumatically operated single-clipper
Laminating rollers Billhöfer Model 102 & 104 series and maybe others Year 2005 Qty available 1 set Available Direct
Bending capacity: Copper or brass tube: 54 x 4 mm Steel tube: 54 x 2 mm Stainless steel pipe AISI 304/316: 42 x 3 mm Hydraulic tube ST35: 54 x 4 mm Furniture construction tube: 54 x 3 mm Aluminium tube: 54 x 5 mm Gas pipe for piping: 1 1/2 " Maximum bending angle: 210° Engine power: 1,1 kW Voltage: 400 V Machine dimensions (W x D x H) without stand: 800 x 300 x 680 mm Approximate weight: 107 kg Scope of delivery: Bending segment 1/4 "G (Ø 13.72 mm) incl. counter rollers and race Bending segment 1/2 "G (Ø 21.3 mm) incl. counter rollers and race Bending segment 1 "G (Ø 33,7 mm) incl. counter rollers and race Bending segment 1 1/4 "G (Ø 42.25 mm) incl. counter rollers and race
Tip height: 130 mm Top width: 450 mm Rotational speed: approx. 55-3000 rpm Pneumatic clamping system Spindle nose: W 25 Div. W25 collets available Div. holder available BERGER LAHR axis motors Combitec EIP E-500 control Manual control available Coolant system available Machine lamp available Machine feet available Dimension (Lxwxh): approx. 1400 x 560 x 1230 mm Weight: approx. 550 kg The machine is located in a clean good condition!
Maja SA 85 S compact flake ice machine, ice output 85 kg / 24 h, with integrated condensing unit. You are very welcome to inspect and test the machine in our facility in Koblenz, Germany.
Tip height 102 mm Top width 450 mm Leit.-/ spindle Collets W20 available Rotational speed: approx. 210 3000 rpm Reduction gear Links.-right rotation 2-stage drive L x W x H: CA. 1760 x 595 x 1230 mm Weight: approx. 650 kg
MAZAK laser cutting machine STX510 MKIII 4kW TOP CONDITION - LIKE NEW - ONLY 700 RUNNING HOURS year: 2012 refurbished, MAZAK lasercutting machine with 2500W table size: 3000mm x 1500mm machine dimension 2,9m x 7,3m chip conveyor LAN / USB connection automatic nozzle change fast piercing in heavy materials piercing sensor plasma sensor for stainless steel cutting burning sensor for mild stelle cutting full covered machine table FE: 22mm VA: 15mm ALMG: 10mm plastics possible to cut incl. software incl. exhauster option: warranty, setup, training option: fully automatic loading/unloading CELL system
Maja SA 70 fragments of ice maker, ice power approx. 70 kg / 24 h, water consumption approx. 0, 07 m³ / 24 h, refrigerant R 404A. The machine can be visited like to 56070 Koblenz, and tested.
JPT-260 Planer - Thicknesser Planing width: 256 mm Drum: 3 - Strip cutter Engine power: 230V/400V 2650 W Thickness forward: 3-225 mm Feed speed: 5,5 m / min. Weight 170 kg G & JET-10000289T
Built in 2001 Equipment opening station with sucker and sword main product feeder 10 insert feeders stream delivery 2 pressure vacuum pump
Hardware drill Ruchser RU EBL2, 5-S Masch. No. 00664-2-96 Weight approx. 700 kg Built in 1996 L x W x H: 350 x 80 x 130 cm The machine is in good condition, ready to use. Spare parts/service MATEC CH-4952 Eriswil/DE-79618 Rheinfelden Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12
Built in 2009/2005 Size min. 100 x 120 mm Max 300 x 430 mm Thickness Film thickness 20-100 mµ Mechanical speed 25,000 CPH Equipment 10 stations rollstream ROS 1 VSE-ROS-ES-RE-300-KWE twin multi disc unwind station 4 MTD AWS OWK built in 2005 JET feeder 8 JEF-450-FVM SA190 built in 2005 foil wrapping machine CMC 2800 with two feeders built in 2009 twin stacker CMC
Built in 1991 Size max 700 x 1,000 mm min 150 x 200 mm Buckle width min 60 mm Speed max 25-160 m / min Suction equipment continuous stream feeder counter IZVA 341 1st folding unit: 4 buckle plates rear-mounted slitter shaft 2. rear-mounted slitter shaft noise prevention 2nd folding unit: 4 buckle plates rear-mounted slitter shaft noise prevention folding 3rd unit: 2 buckle plates rear-mounted slitter shaft delivery: belt delivery
HEIDELBERG Stahlfolder RFH 66/4 BCUH of 2007 16 pages combined. International - English & German fold A folding machine of 66 cm, config; -1St unit 4 x. Pockets, round pile feeder + 3 x. Knives KTL = 16 pages - int. English or German folds > > Option: VF-66 2006 - Mobile knife / total fold 32 pages < < Delivery St. Unit TSH 70 presser stacker Condition; VERY GOOD condition, immediately available, Can be lakes in our factory at Strasbourg FR
Roll length: 1250 mm max sheet thickness: 1.25 mm Roll diameter: 60 mm Length: 1780 mm Depth: 550 mm Height: 1030 mm Weight: approx. 230 kg
2 NTE side labelling machines: Serial numbers: PHARMA 02 & PHARMA 03 Year of production: 2004 Both labelling machines are fitted with Leuze Electronic reject systems. Label height: 110mm Conveyor width: 180mm Condition: good Dimensions: 850mm x 1.350mm & 1.050mm (LxW&H)Price per machine: 2.500 EUR Price combined: 4.500 EUR
Horizontal grinding optimum surface grinders ELB - 6375 ND - PLC Second-hand machine Surface grinders - horizontal ELB optimal 6375 ND - PLC Second-hand machine overhauled 2016 Surface grinders - horizontal ELB-SCHLIFF optimal 6375 ND - PLC Second-hand machine Grinding length: 600 mm Grinding width: 375 mm Workpiece height: 375 mm Table clamping surface: 600 x 350 mm Grinding wheel dimensions: 300 x 50 mm Grinding spindle motor: 4.7 kW Table speed: 2-30 m / min Grinding wheel speed: 1450 RPM Total power: 12kW Weight approximately: 3.5 t Space requirement approx.: 2.8 x 2.5 x 2.5 m Part overtaken 2016 + 12 months warranty, condition Control with touch screen new Paper machine Magnetic Chuck 600 x 350 Automatic table dressing with compensation 1 flange Items put up Installation / commissioning / transport
maximum number of results exceeded
please refine your search
