machines for filling used for sale

Foreign buyers get the 19% VAT back immediately after the machine is exported from Troostwijk Youtube function and state video: https://youtu.be/c9EaB9e_sEs - Former Linde full-service device - Service valid until 04/2027 - UVV valid until 04/2027 - Battery: 37/2021 80V 620Ah, very good performance measured with 85.4V - Facelift model with tilt angle display (practical for sensitive goods) - Clear-view mast without central hydraulic cylinder - 3rd + 4th valve; Multiple fork adjuster + sideshift (easy fork adjuster possible on request) - Full cabin with heater and windshield wipers - white non-marking tires - LED front work light - LED work light at the rear - Comfort seat with lumbar support and seat heating Auction-ID: A1-45451-62

Meyer 4 fork system, front and rear work lights, blue spot, flash light, battery with automatic filling, new tires Auction-ID: A3-43525-282

Youtube function and status video: https://youtu.be/C7fSuG3ugzs Former Linde service device Service valid until 01/2027 UVV valid until 01/2027 Battery: 49/2018 48V 500 Ah, with very good performance; measured with 50.6V - Duplex mast with full free lift - 3rd valve; Sideshift - Load protection grille (can be easily dismantled) - Facelift model with tilt angle display (practical for sensitive goods) Auction-ID: A1-45451-194

REMA Battery Connector 220V plug Delivery by freight forwarder possible on request. Auction-ID: A1-45451-3583

Youtube function video: https://youtube.com/shorts/OBVDwbD3IUk FEM3 (approx. 50cm): Fits any forklift with a payload of 3,000-5,000kg Fork length: 120-200cm Auction-ID: A1-45451-1174

REMA Battery Connector 220V Wall Plug Delivery by freight forwarder possible on request. Auction-ID: A1-45451-3675

REMA Battery Connector 220V Wall Plug Delivery by freight forwarder possible on request. Auction-ID: A1-45451-3623

Youtube function and status video: https://youtu.be/vTVaafEalpw Battery 06/2011 80V/4PzS/620Ah, very good performance measured with 81.6 V 3. Valve; with sideshift 3. Auxiliary valve free Duplex mast with full free lift Auction-ID: A1-45451-186

Foreign buyers get the 19% VAT back immediately after the machine is exported from Troostwijk Youtube function and status video: https://youtu.be/Cb1yBDERkBE Former Linde full-service machine next service not due until 8,250 hours next UVV not due until 02/2027 - Facelift model with tilt angle display (practical for sensitive goods) - Full cabin with heating, AC air conditioning and windshield wipers - 3rd valve; with sideshift - 4. Valve for tine adjuster - RedSpot, camera front, double pedal - High-quality pneumatic tires Auction-ID: A1-45451-23

Heavy duty and robust Clark diesel forklift with a lift capacity of 6 tonnes at 600 mm load centre. This machine is built for industrial use and is known for its reliability and simple engineering. The forklift is working and recently equipped with a new battery, making it immediately deployable. Ideal for heavy-duty applications in industry, agriculture, warehousing or logistics. Main features: Lifting capacity: 6000 kg, Lifting height: approx. 3.45 meters, Diesel version, Strong and reliable Clark technology, Solid forks, Easy to maintain - Condition: Used, with normal signs of wear. Works properly. 1 work light defective. Auction-ID: A3-43525-10906

Youtube function and status video: https://youtu.be/TfB-a20Mxmw Former Linde service device Service valid until 01/2027 UVV valid until 01/2027 Battery: 01/07/2020 24V 8PzS 920Ah, with very good performance; measured at 25.5V - Triplex mast with full free lift and adjustable lifting height limitation - 3rd + 4th valve; Fork adjuster with sideshift - Facelift model with tilt angle display (practical for sensitive goods) - White non-marking tires Auction-ID: A1-45451-68

Year of construction 06 / 2024 REMA Battery Connector 16A plug Delivery by freight forwarder possible on request. Auction-ID: A1-45451-3576

Foreign buyers get the 19% VAT back immediately after the machine is exported from Troostwijk Youtube function and status video: https://youtu.be/yvC-dlPKqbc - Former Linde full-service device - Service valid until 02/2027 - UVV valid until 02/2027 - Battery: 11/2019 80V 5PzS 625Ah, very good performance measured with 83.3V - Clear-view mast without central hydraulic cylinder - 3rd + 4th valve; Fork adjuster with sideshift - Full cabin with heater and windshield wipers - Facelift model with tilt angle display (practical for sensitive goods) Auction-ID: A1-45451-169

Charger with battery plug and wall plug Loading onto trucks no problem Auction-ID: A1-45451-3660

- Last service at approx. 790 operating hours; - Drive: 4x4; - Very good tires; - Full cabin with heating; -Triplex mast; - Viewing recommended; - Video on request; Auction-ID: A1-46334-17

REMA Battery Connector 220V plug Delivery by freight forwarder possible on request. Auction-ID: A1-45451-3616

Foreign buyers get the 19% VAT back immediately after the machine is exported from Troostwijk Youtube function and status video: https://youtu.be/fas5FaJ6C2g - Former Linde full-service device - Service valid until 04/2027 - UVV valid until 04/2027 - Battery: 10/2019 80V 4PzS 500Ah, very good performance measured with 83.8V - Facelift model with tilt angle display (practical for sensitive goods) - Triplex mast with full free lift - 3rd + 4th valve; Fork adjuster with sideshift - Full cab without driver's door with heater and windshield wipers - Side fall-out protection (can be easily dismantled) - LED front work light - LED work light at the rear - Comfort seat Auction-ID: A1-45451-196

Foreign buyers get the 19% VAT back immediately after the machine is exported from Troostwijk Youtube function and status video: https://youtu.be/Tjd0oqbzxks - Former Linde full-service device - Clear-view mast without central hydraulic cylinder - 3rd + 4th valve; Fork adjuster with sideshift - Full cabin with heater and windshield wipers - LED front work light - LED work light at the rear - Comfort seat - Attention: drives slowly, error in the display Auction-ID: A1-45451-73

- Incl. shovel & fork; - Full cabin; - Wide tyres; - Good condition; - Ready to drive; - Viewing recommended; - Video on request; Auction-ID: A1-46334-6

Foreign buyers get the 19% VAT back immediately after the machine is exported from Troostwijk Youtube function and status video: https://youtu.be/RE-BQQs6DaQ - Former Linde full-service device - Service valid until 03/2027 - UVV valid until 03/2027 - Battery: 27/10/2017 48V 5PzS 700Ah, very good performance measured with 50.0V - Triplex mast with full free lift - 3rd valve, sideshift - 4th valve, push forks 115-240cm - Roof pane - Rear camera - Integrated scale Auction-ID: A1-45451-240

REMA Battery Connector 400V plug Delivery by freight forwarder possible on request. Auction-ID: A1-45451-3681

Foreign buyers get the 19% VAT back immediately after the machine is exported from Troostwijk Youtube function and status video: https://youtu.be/elZU9VCl5MU - Former Linde full-service device - Service valid until 04/2027 - UVV valid until 04/2027 - Battery: 24/2019 48V 750Ah, very good performance measured with 50.9V - Facelift model with tilt angle display (practical for sensitive goods) - Triplex mast with full free lift - 3rd + 4th valve; Fork adjuster with sideshift - Windshield with windshield wiper - Roof pane - Side fall-out protection (can be easily dismantled) - white non-marking tires - LED front work light - LED work light at the rear - Safety light at the rear - Comfort seat with lumbar support Auction-ID: A1-45451-161

Foreign buyers get the 19% VAT back immediately after the machine is exported from Troostwijk Youtube function and status video: https://youtu.be/vSnrGn6A6ug - Service valid until 04/2027 - UVV valid until 04/2027 - Battery: 05/2018 80V I5PzS 625Ah, very good performance measured with 83.1V - Triplex mast with full free lift - 3rd + 4th valve; Fork adjuster 37-130 cm with sideshift - Windshield with windshield wiper - Roof pane - white non-marking tires - LED front work light - LED work light at the rear - Warning light orange - Comfort seat Auction-ID: A1-45451-39

REMA Battery Connector 16A plug Delivery by freight forwarder possible on request. Auction-ID: A1-45451-3556

REMA Battery Connector 220V plug Delivery by freight forwarder possible on request. Auction-ID: A1-45451-3523

REMA Battery Connector 220V plug Delivery by freight forwarder possible on request. Auction-ID: A1-45451-3525

Foreign buyers get the 19% VAT back immediately after the machine is exported from Troostwijk Youtube function and status video: https://youtu.be/RHCYSpIB5hc - Former Linde full-service device - Service valid until 11/2026 - UVV valid until 11/2026 - 4x tires new 11/2025 - Battery: 35/2019 48V 750A, very good performance measured with 57.7V - 3rd valve; Sideshift - 4. Additional valve for fork adjuster Auction-ID: A1-45451-31

nominal force:2500 t stroke:600 mm cycle time:13 - 18 s distance between columns:1720 mm Distance table/ram, max. stroke up, adjustment up:2600 mm table surface area:1720 x 1800 mm allowed max. force:4000 t blow die to die:5000 t ram surface:2100 x 1320 mm capacity of ejector in table:40 t ejector stroke in table:250 mm ejector surface area in table:900 x 820 mm capacity of ejector in ram:6 t ejector stroke in ram:40 mm spindle diameter:425 mm power requirement:900,0 kW weight:335,0 t Dimensions (WxDxH):3,4 x 4,6 x 9,7 m height over floor:8,3 m fully-automated forging line:to produce axle shaft

impact energy:207951 mkg ram hammer stroke:660 mm no. of strokes:100 /min impact energy:2040 kJ distance lower die block / ram gudeway:660 mm Throat:750 mm steel forging - rectangular up to:240 mm steel forging - diameter up to:270 mm power requirement:75,0 kW weight of hammer:16,5 t weight of anvil:15,5 t ram hammer weight:750 kg weight:32,0 t dimensions (WxDxH):3,2 x 1,45 x 3,45 m Mode of operation:pneumatisch

Foreign buyers get the 19% VAT back immediately after the machine is exported from Troostwijk Youtube function and status video: https://youtu.be/cf28_BwtBUo - Former Linde full-service device - Service due in 813 operating hours - UVV valid until 05/2027 - Facelift model with tilt angle display (practical for sensitive goods) - Clear-view mast without central hydraulic cylinder - 3rd + 4th valve; Fork adjuster with sideshift - Full cabin with radio, heater and windshield wipers - LED front work light - LED work light at the rear - StVZO lighting with turn signals for road approval - Safety light at the rear - Safety light at the front - Comfort seat with lumbar support and seat heating Auction-ID: A1-45451-46

Motor power: 1,5 kW. Max. mortise width: 180 mm. Max. mortise depth: 180 mm. Chain width: 2x10 mm. Machine dimensions: 600x950x1900 mm. Weight: ~200 kg.

Kettenstemmer GF L x W x H: 120 x 70 x 270 cm Weight 570 kg Baeqvhtqms Year of construction 1983 The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

TECHNICAL DATA: Max oscillation length mm: 100 Max depth of slots mm: 80 Spindle center distance min mm: 84 / max 1170 Spindle rotation rpm: 6.000 / 12.000 Processing: double sided Weight Kg: 2250

TECHNICAL DATA: Clamping height max mm: 1040 Tenoning depth max mm: 150 Slot length max mm: 340 Main motor power HP: 3 Weight Kg: 340

Chain resisters L x W x H: 1.2 x 0.8 x 2.2 m Weight approx. 480 kg Year of construction 1977 The machine is in good condition, ready for operation. Subject to change, error, prior sale ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Phone 0041 62 966 18 32 Fax: 0041 62 966 21 12

MUTI chain mortiser and bits model OMS 4MM for locks: • Vertical unit with chain, 3 hp motor • Vertical unit with 2 points, 0.75 hp motor • Horizontal unit with 2 points, 2.5 hp motor • Weight approx. 550 kg • Machine not according to CE standards, for export AVAILABILITY FROM APRIL 2024

CAMAM oscillating mortiser with 2 benches mod. MO/2A - 4 spindles -Volt. 380/50 - Matr. 145

BACCI multiple oscillating mortiser mod. MX90 - 5+5 horizontal spindles - 2+2 vertical spindles - Selectable spindle revolutions motor per motor. . laps 1' 6000/12000 - Max. slot inclination 20° - Tilt to and from the outside – standard -7° + 30° - Max. distance between spindles 1280 mm - Matr. 228 - CE standards - Year 1999 - Complete with manual and CE declaration

Oscillating mortiser with 2 benches BALESTRINI mod. 2CAP

Bulk Distribution Station

Main product investors Product accelerator Suction opening station 2 Product supplement investors End element with discharge Dashboard Band display 1 compressed air/vacuum pump Still in operation: No Available: immediately

We offer all types of screw manufacturing machines M3 - M25 -A href=inchabc://abc.steinfels-kg.de/sale/screws/inch>all information about the machine please click here

Various machines mostly Wafios or Deiters available! Eg. Wafios UF30 / VDF80 / DF3

We can offer you all types of screw making machinery for M3 - M25

We can offer you all types of Wafios nail machines from S25 - N90

Make Wafios / MRP / Vitari Various machines available! Diameter areas 2 - 45 mm

Ladies and gentlemen, we may offer you, on the basis of our "General Terms and Conditions of Delivery and Payment for the Trade in Used Machinery and Equipment", we offer you: 1 piece used vacuum oven, Make: BMI Type: B 64 R THY Dimensions: 600 x 900 H x 600 mm Max. temperature: 750C Power: 60 kW max. batch weight: 600 kg Working vacuum: 5x10-2 to 5x10-3 mbar Cooling pressure: 1.2 bar abs. the parts remain bare Price and pictures on request All prices are from Station Europa and the dismantling and all follow-up costs are to be made by the buyer. VAT is not included in the prices. The contractual agreements for the individual offers must be agreed separately and only apply after the contract has been signed. Mistake reserved. All technical details, dimensions, etc. are approximate and are non-binding for the supplier. The technical data ...

Makes: Hilgeland / EW Menn / Ingramatic Diameter ranges 1mm - 20mm

We can offer you all types of Wafios nail machines from S25 - N90

we can offer various wire pin presses, please ask for our list