machines for animal used for sale

Machine Details Stock-No. 1105-03435 Type of machine Bed Type Milling Machine - Universal Make LAGUN FBF 1200 Type HEIDENHAIN TNC 335 Year of manufacture 1991 Type of control CNC Storage location HAGUENAU Country of origin SPAIN Delivery time IMMEDIATELY Freight basis EX STOCK Price Technical details x-travel 1100 mm y-travel 600 mm z-travel 600 mm surface area 1200X 550 mm turning speed range: 50-3000 TR/MIN power capacity 20 kW control TNC 355 HEIDENHAIN Additional information CNC CONTROL HEIDENHAIN TNC 355 IN PERFECT WORKING CONDITION

I sell the four-side planer Futura P-MAX 23/5+UNIV, built in 2008. 6 Spindle: bottom - right - left - top - bottom - universal Electronic programming for working width, working height and feed speed. Element max. 230x170mm ! All 6 spindles 6000 rpm. Material prints for short elements. Weight 2500kg. 1-zone pneumatic material pressure system for feed Fully operational. Available the same. Exhibition machine, has worked very little !

1 Clamp Perfect Binder, Delivery Belt Year: ca. 1993

with B200/25 and Number: 6852884, Shrink Wrap / Foil Sealing

We can offer Arburg injection moulding machines, 220,270,420 etc.all goog condition.Serious buyers contact us. We have many brands, models,years machines, tell me what you need seriously!

Double end tenoner, edge processing machine, scoring motor, chipper motor, electric motor, spindle motor, milling motor -Power: 6.3 kW 5800 rpm at 100 Hz -Voltage: 380 V -Acquisition shaft: Ø 40 mm -Tool: mm -Dimensions: 540/260/H150 mm -Weight: 43 kg

- Make: Copper mill - Type: Vuin-plus 600 - Year of construction: 1991 - Working width: 600 mm - Working height: 250 mm - Working height 4-sided: 200mm (up to 250 mm possible) - Number of working shafts: 5 (+2 chamfer units at the top) - Wave arrangement: bottom-up-right+left-down - Lower and upper knife shaft with 4-reversible Leitz Sinus knives - Right and left planer head with 4 reversible blades - Lower fifth shaft for saw blades, profiles, plaster shaft, etc. - Spindle diameter: X-X-40-40-40 mm - Motor power(s): 11-15-11-11-11 kW - Chamfer motors top: 2 x 1.85 KW - Feed speeds: 4-30 m/min - Feed motor: 4 kW - Driven rollers in the table: 3 - Top feed rollers: 4 - Pull-out transport rollers: 2 - Table height constant: approx. 900 mm - Weight: approx. 3800 kg

! ENTER THE + WORLD! Conventional TSCHUDIN HTG 310 + with innovation and protection packages

Shrink Wrap/Foil Sealing

We can offer a Krauss Maffei injection moulding machine, manufactured in 2017, short time working, like new one, serious buyer contact us. We have many brands, models,years machines, tell me what you need seriously!

DMG MORI NRX 2000™ CNC Lathe TECHNICAL FEATURES: Year: 2017 NC Type: MITSUBISHI M730UM Maximum diameter Machinable: 150 [mm] X-axis travel: 100 [mm] Z-axis travel: 220 [mm] X1 Axis Fast Feed Speed: 30000 [mm/min] Fast feed speed X2 axis: 30000 [mm/min] Z1 axis fast feed speed: 30000 [mm/min] Z2 axis fast feed speed: 30000 [mm/min] Spindle Nose: JIS A2-5 Maximum length Machinable Spindle 1: 100 [mm] Maximum length Machinable Spindle 2: 100 [mm] Maximum speed Spindle 1: 6000 [rpm] Maximum speed Spindle 2: 6000 [RPM] Turret Turning Tool Power 1: 1.5 [kW] Turret 2 rotating tool power: 1.2 [kW] Number of posts - Turret 1 : 10 Maximum speed Rotating Tools - Turret 1: 10000 [RPM] Number of posts - Turret 2: 10 Maximum speed Rotating Tools - Turret 2: 10000 [RPM] Installed power: 38 [kVA] Supply voltage: 400 [V] Working time: 12270 [h] Weight: 5700 [Kg] EQUIPMEN ...

Folding and Inserting Machine: speed: upto 4.000 per hour, maximum monthly performance: 70.000, maximum annual output: 600.000, power required: 230V, noise level:

Control Siemens Sinumerik 828D Speed [rpm] 12000 Travel X/Y/Z [mm] 900/460/520 Tool pick-up BT40 General: Control system Sinumerik 828D X/Y/Z travel 900/460/520 mm Speed 12,000 rpm Tool holder BT40 Spindle: Belt spindle technology Speed 12,000 rpm Power 18 kW Torque 117 Nm Rapid traverse X/Y/Z 36/36/30 m/min Tool holder BT40 Tool magazine: Technology Chain Magazine (ATC TYPE) Number of stations 30 pieces Work table: Clamping area 1050 x 460 mm Table load 600kg Equipment / Accessories: Chip disposal chip conveyor Coolant supply IKZ plant Setup operation Electronic handwheel Miscellaneous Rinsing gun

LAGUN NG- L 1800 CNC universal milling machine LAGUN Machine Tools S.L.- Spain Control HEIDENHAIN TNC 360 X-axis 2300 mm Y-axis 650 mm Z-axis 600 mm Table 1900 x 550mm Table load 2,5t Spindle speed stepless 50 - 3000 rpm Spindle taper SK 40 Spindle motor 9.5kW Total power 15 kW Feeds -stepless- 0 - 5000 mm/min Rapid traverse 10m/min Tool changer 20 tools Weight ca. 6,5 t Accessories: 3x Vices, about 10 tool holders, touch probe, others

Fully Automatic Bread Slicing Machine Manufacturer: TREIF Type: DISKUS – SB Technical data: Round knife cutting bread slicer Oil-free cutting even of warm breads 3 cutting thicknesses selectable: 8mm, 10mm and 12mm Bread passage: L 380 x H140-160 x D280 mm Automatic bread gripper suitable for all types of bread with bread rack for bagging with sight glass cover for optimum safety during the cutting process Easy cleaning without having to move the machine 400 volts / 0.9 kW / 10 A Dimensions: H110 x W90 x D76 cm Weight: 200 kg Mobile on 4 pulleys with 2 brakes Year of Make: 2010 Function checked, machine is thoroughly cleaned and ready for immediate use! Condition, see original pictures! If you have any questions, email or call.

Diosna Wendelkneter Type: W240 A Completely overhauled and repainted Spiral kneader extendable for max. 240 kg dough or for max. 150 kg flour 2 speeds slow and fast 2 automatic timers 2 spiral spiral steel / nickel-plated Spirals are made of steel and completely nickel-plated with plier lock Boiler is driven by friction wheel drive Head hydraulically lifting and lowering with switch box with 3 stainless steel boilers / Refurbished Vat capacity 355 litres Machine and boiler were completely overhauled and repainted Height: 180cm Width: 110cm depth: 150cm

Treif Diskus Smart Circular Knife Machine digital control Circular knife Cutting width adjustable from 4mm to 15mm 400V 50Hz Stainless steel cladding Weight approx. 150 kg Operating voltage 400 volts Control voltage 24V/DC V AC Rated power 0.9 kW Height: 110cm Width: 65cm Depth: 70cm

fully functioning used 3 axis milling machine, brand lid, type FP2, with vice, and many accessories.

SODICK AQ325L wire EDM was built in 2002 in Japan by Sodick Co., Ltd. The machine, distinguished by its exceptional precision and reliability, is an excellent choice for the production of parts with complex geometries, i.e. dies, punches and tools. The electrical erosion technology used in the machining process enables difficult shapes to be achieved in even the hardest materials. This method also minimises or completely eliminates the need for other secondary processes, such as polishing. The SODICK AQ325L is designed for machining workpieces with a maximum weight of 450 kg. The machining process is performed in a dielectric-filled work tank using a wire with a maximum diameter of 0.30 mm. The workhead moves in five axes X,Y,Z,U,V with feeds of 350 mm, 250 mm, 220 mm, 80 mm and 80 mm respectively. The use of a dielectric increases the surface quality and dimensional accuracy of the w ...

CNC machining centre HERMLE U 1000 T – universal milling machine For sale is a high-quality CNC universal machining center from the renowned manufacturer Hermle, model U 1000 T. The machine impresses with its stable design, high precision and versatile applications. Ideally suited for toolmaking, single part production and demanding milling work. General information: Machine Type: CNC Machining Center / Universal Milling Machine Manufacturer: Hermle Model: U 1000 T Year of Make: 1999 Control: Heidenhain TNC 426 Condition: Used, good general condition, functional Shipping time: Immediately available Technical data: Travel (X / Y / Z): approx. 1000 / 630 / 550 mm Table size: approx. 1200 × 630 mm Tool holder: SK 40 Spindle speed: up to approx. 7000 rpm Tool magazine: approx. 16 places Quill stroke: approx. 75 mm Milling head: swivel 0 – 90° (unive ...

Bakon cream blower Type: Top Cream 530 Year of construction: 2011 Stainless steel digital control Temperature indicators 1.5kW As good as new condition Height: 115cm Width: 50cm Depth: 64cm

Graef Euro 2250 Knife diameter 220 mm Cutting height 155 mm Cutting length 220 mm Cutting thickness 3-15 mm Tabletop unit Footprint 460 x 320 mm Stock: 50 pieces

Reference ID PP-57928 Category Flatbed Die Cutter Manufacturer Gietz Model FSA 790 EFF Year Built 2001 Color - Impression - Working Hours - Speed 5,500 sheets/h Max. size 790 x 560mm Min. Size 297 x 210mm Condition Good Location Europe Availability Immediately Machine Description hot foil stamping and cuting MABEG feeder Transverse foil: 2 axes Longitudinal foil: 3 axes Foil printing option: 2× honeycomb Die-cutting option: Included (die-cutting tool added) Hologram unit: Electronics renewed in 2020 Heating system: 6 heating zones Maximum sheet size: 790 x 560mm Minimum sheet size: 297 x 210mm Maximum stamping area: 720 x 520mm Speed up to 5,500/ hr

Hartmann bread slicer and packaging line Hartmann Slicer SL 20 Year of construction 1998 Hartmann Automat GBK 220 Year of construction 1991 Bread slicer and packaging line Compact for whole breads and individual slices with closure Digital Screen Panel with air/compressor connection with new knives 230/400V 50Hz Total Kg: 1800kg 2 whole lines in stock! Directly from the bakery

Key data: 660 mm, 3000 mm, 440 mm

Sine 330/3000 D Well-maintained conventional lathe without mounted lathe chuck but with standard accessories The construction follows the classic design however, is based on a heavy, one-piece cast machine bed. How in the case of heavy lathes here, too, the adhesion between the engine and spindle via a manual Multi-plate clutch. With integrated Features such as the removable bed bridge, rapid traverse and a Taper turning device. WORKSPACE Workpiece length 3000 mm Turning diameter over bed 660 mm Circumferential Ø over support 440 mm Turning diameter without bridge 900 mm Bridge length 320 mm Bed width 400 mm TRAVELS X-axis travel 368 mm Travel Z1 axis 230 mm Swivel range upper slide 45° MAIN SPINDLE Spindle speed 25 1/min - 1600 1/min Spindle bore 105 mm Spindle holder D1-8 RUSH COURSE Rapid traverse X-axis 2000 mm/min Rapid traverse Z-axis 4000 mm/min ...

Diosna Spiral Kneader Type: SP 160 AD extendable spiral kneader for a maximum of 160kg of dough or for a maximum of 100kg of flour with 2 timers Automatic switching on and off via clocks Stainless steel flour dust cover 2 speeds (gears) slow and fast Boiler locking via pliers operated with hydraulics suitable for almost all doughs robust and strong Trade-in, delivery and assembly on request Vat capacity 260 litres

2K52-1 radial drilling machine was built in the 80s in the USSR. The offered machine is perfect for both unit and small batch production. It is capable of performing operations such as drilling, reaming, countersinking and threading in workpieces of various sizes. All these machining processes are performed by means of a reliable, tiltable spindle with an optimised speed range. This solution enables the machining of workpieces at different angles, without the need for repositioning them. The work head with spindle moves along the arm, enabling precise setting of the drilling point. The arm, in turn, moves vertically and horizontally along the rotating column, providing great flexibility during operation. The machine column rotates around its own axis, allowing the arm to be repositioned relative to the base. The 2K52 radial drilling machine is also equipped with, among others, a work tab ...

Sliding Table Saw Milling Machine Planing Machine Slotted Hole Drilling Machine Combination Machine Table Saw Circular Saw Carpenter Circular Saw Format Saw Panel Saw Table Milling Machine Swivel Spindle Milling Machine FIELDS Type: BF6-31 YOC 1990 Format sliding carriage 1.6 cm Manual height adjustment of the saw blade Manual swivel of the saw blade up to 45° Rip fence with fine adjustment up to approx. 80 cm Boom table Miter stop Motor power main motor 3 KW Swivel spindle milling machine Manual height adjustment of the swivel spindle Manual swivel of the milling spindle up to 45° backwards. Milling spindle diameter 30 mm 3 speeds adjustable via belt. Milling spindle under table retractable and removable. Engine power milling unit 3 KW Milling fence with fine adjustment Dressing thickness planing machine Planing width 31  ...

Grinding machine Löwer type HBS 400 Technical data: - Grinding width max. (mm): 390 - Grinding height max. (mm): 390 - Sanding shoe from above: 1 - Grinding motor (kW): 7.5 - Sanding belt dimensions (mm): 300 x 1800 - Transport carpet: for material feed - Feed speeds (m/min.): 6/11/16 - Connection for suction diameter (mm): 150 - Constant table height - Pneumatic sanding belt oscillation - Pneumatic abrasive belt clamping - Special HBS sanding shoe: for conforming grinding with thickness differences of up to 4 mm or crooked workpieces - Selector switch adaptation grinding / calibration - Motorized workpiece thickness adjustment with rapid traverse - Automatic workpiece thickness scanning - Machine length (mm): 1150 - Machine width (mm): 1020 - Machine weight (kg): 950 - CE compliant

Puller / Puller apparatus for transverse ovens (80cm) Fits for ovens that are 80x60cm. Bottom puller Condition: New 10 pieces in stock

Key data: 690 mm, 2255 mm, 2500 1/min

Basic machine data Used CNC Lathe from SMEC (SAMSUNG) Make: SMEC (SAMSUNG) Type: PL 45LY Year of Make: 2014 Condition: Mint Control: Name: FANUC OI-TD FANUC Manual Guide (dialog program) Travels: x-travel: 350 mm // y-travel: +/- 60 mm (120 mm) // z-travel: 2250 mm Technical data: • C-axis • Max. speed: 2500 rpm • Swing diameter over bed: 775 mm • Max. turning diameter: 690 mm • Max. turning length: 2255 mm • Hydraulic 3-jaw chuck: 450 mm • Rapid traverse: x = 20 m // z = 18 m • 12 tool positions • BMT75 interface • Bar passage: 118 mm • Hydraulic tailstock (programmable) • Hydraulic bezel SMW 30-245 mm • High-pressure coolant pump up to 30 bar • Chip conveyor • Man. Tool Measurement Arm • Signal light • Tool package included with machine Incl. 4 driven tools 2 x Axial 2 x Radial The machine is in mint con ...

Key data: 1150 mm, 900 mm, 600 1/min

Basic machine data Used CNC lathe from HWACHEON Make: HWACHEON Type: VT 1150 M Year of Make: 2008 Condition: Very good Control: Name: FANUC 0iTC Travels: x-travel: 610 mm // z-travel: 950 mm Technical data: • Spindle: 600 rpm • 3-jaw chuck ⌀ 1270 mm • Turning diameter: 1150 mm • Turning length: 900 mm • 12-station turret • BMT 85 tool holder • Tool drive: 3000 rpm • Rapid traverse: x = 24 m/min y = 20 m/min • Tool magazine: 12 stations (Capto C8) • Chip conveyor • IKZ (internal coolant supply) • Machine is sold with complete tool package The machine is in a very good condition – hardly used. Machine has only 3269 PGM hours Prior sale is reserved. No liability is assumed for the technical information provided here. The legal provisions apply.

Control: Dialog 11 with new MCP card Travel range: x-800 y-600 z-550 mm Spindle speeds: 18 – 6300 rpm Pinole by hand: 80 mm Recording: SK 40 Feed: 2 to 10000 mm/min Rapid response: 10000 mm/min Weight: approx. 4050 kg With full cab, chip conveyor, electr. Handwheel Installation dimensions: L: With controller and chip conveyor approx. 4200 mm (without conveyor approx. 3200 mm) B: approx. 3800 mm (With space to open door E-cabinet approx. 4600 mm) H: approx. 2400 mm Can be visited under electricity.

Emco F3 - Milling Machine - Vise - Workplace lighting - Coolant device - Tools & Machine Feet Technical data Working Range: - Slide path longitudinal: 300 mm - Slide path transverse: 200 mm - Vertical slide path: 350 mm - Quill stroke for vertical milling spindle: 45 mm - Vertical milling head swivel: ± 90 ° Clamping surface: - Table dimensions: 600 × 200 mm - 4 T-slots: 12 x 21 mm - Groove spacing: 45 mm Spindle: - Tool holder: DIN 2078 / SK30 - Tool clamping: Pull-out screw M12 - Spindle speeds: 80 / 160 / 245 / 360 / 490 / 720 / 1100 / 2200 rpm Automatic feed for longitudinal slides: - Feed force: 1600 N (160 kp) - Speed: 20 - 200 mm/min (infinitely variable) - Rapid traverse: 1200 mm/min Coolant Facility: - Tank capacity: 30 l - Flow rate: 15 l/min Three-phase motor: - Power: 1.1 / 1.4 kW (60% ED) - Speed: 1400 / 2800 rpm Dimensions: - Dimensio ...

Folding carton boarding machine Uhlmann C 100 LB • Format range folding carton B 30-100, H 15-75, L 70-200 mm • Capacity 10-80 folding cartons/min, clocked • For offset plug-in closure on both sides • Product feed for blister via blister stack shaft • Code reading Laetus Argus for 2x brochure code (front + back), 1x folding carton code, 1x brochure absence in folding carton • Brochure folding and inserting machine from the magazine GUK FA 21/4 Cartonac 91 • Colour embossing station for folding flap opposite the insertion side, 2-line, with embossing numbers • Poor ejection with ejection counter-control • Vacuum generators • SPS Eberle PLS 514 • Connection 400V/50Hz Optional: - New hardware/software Mitsubishi with 8" color Tuach Panel - Code reader Cognex - Validation documentation