machines for animal used for sale

Hours reading not readable. working well. incl working charger. Auction-ID: A1-47391-115

Consisting of 3 crate pallets, 3 metal Kruizinga storage bins with lifting eyes and 2 grab storage bins with contents Consisting of cast-in transport anchors, mounting feet, bolts and the like Auction-ID: A1-50251-288

Electric windows and mirrors, cruise control, 6-speed manual gearbox, air conditioning, length of cargo floor 4600mm, width of cargo floor 2050mm, including road plates, tow bar Auction-ID: A1-47418-160

• Subaru Forester with boxer diesel engine and Symmetrical AWD all-wheel drive. • Mileage: 342,648 km. • TÜV / HU valid until 04/2027. • Engine running • Transmission works • Symmetrical AWD all-wheel drive • The vehicle has been serviced regularly • Extensive service booklet with numerous maintenance and inspection records available • Boxer diesel engine • Automatic climate control available • Cruise control • Multifunction leather steering wheel • Navigation/multimedia system available • Electric exterior mirrors • Roof rails • Fog lights • Alloy wheels • Additional set of tires available and belongs to the vehicle • Spacious trunk • Interior is in a used condition appropriate for age and mileage • Body and paintwork show corresponding signs of wear • Due to the mileage, the vehicle is expressly offered as a used vehicle, f ...

Engine is partly overhauled good working condition Auction-ID: A1-47391-241

YTEF-10 forklift 1000kg electric new Simple forklift with two-part mast and without side shift. 60V battery that is charged at 230VAC.  • Year of construction: 2026 • Own weight: 1600kg • Lifting capacity: 1000kg • Maximum lifting height: 300cm • Maximum working time: 6 hours Auction-ID: A1-47391-112

Electric windows and mirrors, cruise control, steering wheel controls, multimedia system, 6-speed manual, air conditioning, double cabin, tow bar Auction-ID: A1-47418-159

48V battery pack, Forks 1000mm, spoon board 1075mm, plywood mast, side shift, spoon spreader 550/1840mm, blue spot front, blue spot rear, towing eye with pin 25mm, max lifting height 4625mm, max lifting capacity 2000kg Auction-ID: A1-47391-103

Engine does not run well, Electric windows + mirrors, automatic lighting, cruise control, steering wheel control, Multimedia system with Bluetooth and navigation, climate control with zone control, adjustable rear seats, 7 seats, panoramic roof, front fog lights, front parking sensors + rear Auction-ID: A1-47418-211

Ford B-MAX 1.0 EcoBoost – 5-door multi-purpose passenger car (Used vehicle) • Manufacturer: Ford • Model: B-MAX • Type: JK8 • Variant: SFJA1K • Version: 5ABALR • Vehicle class: M1 • Body: Multi-purpose vehicle / 5-door • Registration date: 17.04.2013 • Mileage: 111,946 km • Vehicle identification number: WF0KXXERJKDM49589 • Fuel: Gasoline • Displacement: 998 cm³ • Power: 74 kW / approx. 101 hp • Transmission: 5-speed manual transmission • Seats: 5 • Colour: Black Tyres: • 195/60 R15 88H • Alloy wheels Equipment: • Air conditioning / automatic climate control • Ford/Sony audio system • CD radio • Multifunction steering wheel • On-board computer • Electric windows • Electrically adjustable exterior mirrors • Central locking • Fog lights • Rear parking sensors • ABS / ESP • Airbags • ISOF ...

Please note; no brakes, mast drops, closed box 2100mm, duplex mast, 3rd function, work light, towing eye with pin 30mm, loadrite weighing system, Auction-ID: A1-47391-101

Hyster H2.0FT LPG Forklift – 2017 – 15,093 hrs – 1,960 kg – 4.33 m – weighing system Specifications: Brand: Hyster Type: H2.0FT Year of construction: 2017 Serial Number: P177B04859R Hours: approx. 15,093 hours Fuel: LPG Engine power: 44 kW Transmission: DuraMatch Nominal capacity: 2,000 kg Capacity according to machine plate: 1,960 kg at 500 mm load center Capacity: 1,780 kg at 600 mm load center Maximum lifting height: 4,330 mm Headroom: approx. 2,750 mm Fork length: 1,100 mm Carriage: approx. 1,067 mm wide Own weight according to type plate: 3.820 kg Wheelbase standard: approx. 1,623 mm Front track: approx. 965 mm Ground clearance under mast: approx. 107 mm Turning radius standard: approx. 2,149 mm Length without forks: approx. 2,486 mm Overall length with 1,100 mm forks: approx. 3,586 mm Machine width: approx. 1,157 mm, depending on tyres/version  ...

Including charger 48V, 400v plug, 48V battery pack, forks 1000mm, spoon board 950mm, duplex mast, free lift, led work light, max lifting height 3300mm, max lifting capacity 1500kg Auction-ID: A1-47390-143

WIFO P46 3-Point Pallet Fork – 1,300 kg – 1,000 mm Spoons Specifications: Brand: WIFO-Anema BV Type: P46 Serial Number: B142270-020 Version: 3-point pallet fork / pallet carrier Maximum capacity: 1,300 kg according to rating plate Own weight: 54 kg according to rating plate Number of pallet spoons: 2 fixed steel pallet spoons Length of spoons: approx. 1,000 mm Center-to-center distance spoons: approx. 590 mm Total height: approx. 710 mm 3-point coupling: category I Mounting: mechanical Construction: Fully welded steel Features: Locking pins CE marking No hydraulic connection required No electrical connection required Suitable for pallets, crates and similar loads Particularities: Year of construction unknown Auction-ID: A1-47391-289

Side shift not working equipped with 3 stage powershift Auction-ID: A1-47391-239

Hydraulic band saw machine with - NC control SIMATIC OP17- material feed single 600mm - max. programmable up to 6000mm - hydr. Saw band tension (36 - 40bar) - motor. Chip conveyor - Emergency stop device - feed roller conveyor 4m Cutting diameter 360 mm Saw blade length 4870 x 41 x 1.3 mm Cutting width 360 mm Cutting speed 11 - 110 m/min Drive saw blade 4.0 kW Height of workpiece support 800 mm Machine weight approx. 2.1 t Dimensions approx. 2.3 x 1.9 x 2.2 m Auction-ID: A7-50523-708

Hours are ascending, age approximately 1990. Auction-ID: A1-50090-14

-For machines 6 – 9 T -Working width 800mm -New Auction-ID: A1-49954-35

In the original case with accessories Auction-ID: A1-50529-652

Used tines for pallet fork Distance between coupling points: approx. 420 mm Tine length: approx. 120 cm Auction-ID: A1-50501-26

Used tines for pallet fork Distance between coupling points: approx. 520 mm Tine length: approx. 120 cm Auction-ID: A1-50501-29

2x 400 Volt; 2x 230 Volt; without pallet; Auction-ID: A1-44050-384

battery 48 volts, battery in good condition, incl charger 48 volts 100 amp Auction-ID: A1-40421-83

General Description Wide-format hot/cold roll laminator manufactured by FayonLami . Designed for laminating and mounting printed graphics, signs, posters and other flexible wide-format media. The machine features powered roller operation with adjustable temperature, speed and media handling controls. Technical Details Manufacturer: FayonLami Machine type: Wide-format hot/cold roll laminator Working width: Approx. 1,600 mm Hot and cold lamination modes Powered roller drive Digital temperature display and adjustment Variable speed control Adjustable roller pressure / gap Multiple media unwind and rewind shafts Suitable for liner-backed and linerless film configurations Foot pedal control Emergency stop Auction-ID: A7-50518-9

unused machine, diesel engine 37 KW Auction-ID: A1-40421-28

Consisting of: 141x82x28cm drip tray, 2x drum engine oil and Piusi electric pump with fuel gun. Auction-ID: A1-50348-287

including forging tongs, block and hall block, saddles, Auction-ID: A1-50090-19

80 volt battery year of manufacture 2018, automatic filling system incl. charger Junheinrich 80 volt 100 amp, machine starts lifting and lowering, extra long forks 152cm Auction-ID: A1-40421-80

Clamp, 1925mm maximum width, 750mm minimum width, 1600mm forks. 4 hydraulic functions Auction-ID: A1-41951-3

Solid tires at the front, pneumatic tires at the rear. 4 valves. Auction-ID: A1-41951-2

For 6 – 9 ton crane New Auction-ID: A1-49954-41

80 volt battery from 2018, battery with good conditions. incl. industrial charger 110 amp 80 volt Auction-ID: A1-40421-82

Eckold KF653C. Metal forming, shrinking and stretching machine. Well used but in working order. Comes with foot pedal, 80mm shrinkers, 80mm stretchers, hard tool holders.

Innotech GmbH vertical bag forming, filling and sealing machine, type: 2500 Revo, serial number: 1.32.18.1338, year of construction: 2019, 230-400 V, 3 Ph, 50 Hz, 25 A, weight: 720 kg, diameter filling pipe: Ø 125 mm, film width: 470 mm, seal length: 280 mm, total dimensions: 1400 mm x 2300 mm x 2100 mm.

Ilapak vertical bag form-, fill-, and seal machine, model: Vegatronic 2000 OF, serial number: 0741812003, year of construction: 2012, 400 V, 3 Ph, 50 Hz, 17 A, filling pipe: Ø 125 mm, vertical seal length: 650 mm, horizontal seal length: 320 mm, film width: 470 mm, total dimensions: 2700 mm x 2300 mm x 2350 mm. Including extra filling pipe, dimensions: 650 mm x 650 mm x 1700 mm.

CFS Bakel B.V. mobile forming machine, type: MLF 400, machine number: 2206, year of construction: 2002, 400 V, 3 Ph, 50 Hz, 17.16 A, 7.77 kW, weight: 1186 kg, s/s mesh belt, belt width: 400 mm, dimensions dye: (6x) 180 mm x 20 mm, total dimensions: 2750 mm x 900 mm x 2150 mm. New controls installed in 2017.

Innotech GmbH / Rovema vertical bag form-, fill- and seal machine, type: 2500 REVO, serial number: 1.32.17.1252, year of construction: 2017, 230-400 V, 3 Ph, 50 Hz, 25 A, film width: 510 mm, diameter pipe: 130 mm, vertical seal length: 370 mm, horizontal seal length: 280 mm, total dimensions: 2400 mm x 1450 mm x 1970 mm. Including extra filling pipe.

Equipment: 7804699 Brand: STILL Model: RX60-30L Hours: 7444 Year of Make: 2019 Mast: Telescopic mast Overall height: 2,325 mm Nominal stroke: 3,270 mm Free lift: Hydraulic Actuation: Mini Lever Battery: included Load capacity: 3,000 kg Condition: tilt cylinder knocked out, in the vehicle Hydraulic hoses damaged Seat cushion damaged Wheels front + rear non-round Battery door dents Battery terminals increased Battery trough oxidized Paint damage Auction-ID: A7-50531-263

Equipment: 7447337 Brand: STILL Model: RX60-30 Hours: 7271 Year of Make: 2017 Mast: Triplex Overall height: 2,475 mm Nominal stroke: 5,390 mm Free lift: 1,850 mm Hydraulic Actuation: Mini Lever Battery: With Load capacity: 3,000 kg Condition: Seat cushion damaged Interior trim damaged/missing Wheels damaged at the front Wheels at the rear unrounded and damaged Overhead guard dents Rear fairing dents Battery door damaged and dents Paint damage Operating hours according to counter 7271h Fork positioner AA: 1080 mm AI: 845 mm ZA: 310 mm ZI: 75 mm Auction-ID: A7-50531-137

Equipment: 7591686 Brand: STILL Model: RX60-25 Hours: 965 Year of Make: 2016 Mast: Triplex - Mast Overall height: 2,275 mm Nominal stroke: 4,890 mm Free lift: 1,500 mm Hydraulic Actuation: Mini Lever Battery: included Load capacity: 2,500 kg Condition: Hydraulic hoses damaged Rear fairing dents Battery door panel damaged FSD BSäule (right. Side) Kink Paint damage Auction-ID: A7-50531-258

Equipment: 7804657 Brand: STILL Model: RX60-25 Hours: 6687 Year of Make: 2020 Mast: Telescopic mast Overall height: 3,275 mm Nominal stroke: 5,170 mm Hydraulic Actuation: Multi-lever Battery: With Load capacity: 2,500 kg Condition: Tilt Cylinder Game Hydraulic hoses damaged door, Seat cushion damaged Damaged wheels at the front, out of round Rear wheels out of round Front axle noise Rusty frame Rear fairing dents Battery door rust spots Battery terminals collapsed Battery trough oxidized AHK rear Air conditioning Paint damage Fork positioner: AA: 1025 mm AI: 785 mm ZA: 320 mm ZI: 80 mm Auction-ID: A7-50531-34

Equipment: 7657666 Brand: STILL Model: RX20-20 Hours: 6085 Year of manufacture: 2018 Mast: Telescopic mast Overall height: 2,510 mm Nominal stroke: 3,850 mm Free lift: Hydraulic Actuation: Mini Lever Battery: without Load capacity: 2,000 kg Condition: without battery Wheels worn out at the front Frame dents Paint damage Auction-ID: A7-50531-300

208 cc displacement; 3800 RPM; 7.5 meters maximum suction level; 28 meters maximum head; 3.6 liter gas tank; equipped with sieve, couplings, hose clamps; manual; 3903 Auction-ID: A1-50533-60

Equipment: 7683507 Brand: STILL Model: RX20-16C Hours: 11827 Year of Make: 2021 Mast: Triplex - Mast Overall height: 3,210 mm Nominal stroke: 7,870 mm Free stroke: 2,635 mm Hydraulic Actuation: Joystick4+ Battery: without Load capacity: 1,600 kg Condition: without battery Tilt cylinder and mast bearing knocked out Hydraulic hoses damaged Forks crooked Front wheels damaged Rear fairing dents Paint damage Fork positioner: AA: 910 mm AI: 710 mm ZA: 260 mm ZI: 60 mm Auction-ID: A7-50531-308

Equipment: 7657671 Brand: STILL Model: RX20-20P Hours: 7118 Year of manufacture: 2018 Mast: Telescopic mast Overall height: 2,510 mm Nominal stroke: 3,850 mm Free lift: Hydraulic Actuation: Mini Lever Battery: without Load capacity: 2,000 kg Condition: without battery mast rollers, fork carriages, Tilt cylinder and mast bearing clearance Wheels front and rear worn Paint damage Auction-ID: A7-50531-301

Equipment: 7356703 Brand: STILL Model: RX60-45 Hours: 8220 Year of manufacture: 2018 Mast: Triplex Overall height: 2,600 mm Nominal stroke: 5,380 mm Free stroke: 1,688 mm Hydraulic Actuation: Joystick 4+ Battery: With Load capacity: 4,500 kg Condition: Fork carriage and tilt cylinder clearance Driver's door damaged Seat cushion damaged Interior trim damaged Wheels front and rear damaged Rear rims deformed Overhead guard dents Rear fairing dents Battery trough oxidized Paint damage Auction-ID: A7-50531-166

v.v. 2800 maximum watts; 212cc OHV engine; 50 Hz; mounting kit; steel frame; 15L fuel tank; 3000rpm; unused; 3901 Auction-ID: A1-50533-70

Equipment: 7386514 Brand: STILL Model: RX60-50/600 Hours: 10698 Year of Make: 2020 Mast: Telescopic mast Overall height: 3,400 mm Nominal stroke: 4,980 mm Hydraulic Actuation: Mini Lever Battery: With Load capacity: 4,990 kg Condition: Nameplate damaged Mast rollers and fork carriages knocked out Tilt cylinder and mast bearing clearance Forks crooked Door left damaged Wheels and rims damaged at the rear Overhead guard dents Rear fairing dents Battery door dents Battery terminals raised and oxidized Paint damage Fork positioner: AA: 1560 mm AI: 1260 mm ZA: 455 mm ZI: 155 mm Auction-ID: A7-50531-12

Equipment: 7661152 Brand: STILL Model: RX60-25 Hours: 3212 Year of manufacture: 2018 Mast: Telescopic mast Overall height: 2,525 mm Nominal stroke: 3,670 mm Hydraulic Actuation: Multi-lever Battery: With Load capacity: 2,500 kg Condition: Battery Defective Fork carriers play and chips in the mast Tilt Cylinder Game Roof pane cracks Seat upholstery and interior trim damaged Overhead guard and rear fairing dents Battery door trim damaged, hydraulic damper defective Battery terminals increased, Trough oxidized Paint damage Auction-ID: A7-50531-22

Equipment: 7755249 Brand: STILL Model: RX60-30L Hours: 14780 Year of Make: 2019 Mast: Telescopic mast Overall height: 3,225 mm Nominal stroke: 5,070 mm Free lift: Hydraulic Actuation: Mini Lever Battery: included Load capacity: 3,000 kg Condition: Mast rollers and mast bearing clearance Tilt cylinder knocked out Seat cushion damaged Rear wheels out of round Fender cover damaged Overhead guard dents Battery door trim damaged Paint damage Fork positioner: AA: 1080 mm AI: 830 mm ZA: 305 mm ZI: 65 mm Hydraulic battery extension Hours according to display 14550 h Auction-ID: A7-50531-246