machines bag used for sale

Drill diameter: 13 - 32 mm Tip angle: 90° - 140° Speed: 4800 rpm Connection: 230 V Engine power: 0.25 kW Weight, approx.: 28 kg Dimensions, approx.: 490 x 250 x 260 mm Characteristics: - Ideal for grinding HSS/hard metal spiral drills - Safe operation due to forced grinding - Peak angle adjustable from 90° - 140° - Compact design, with collet storage in the machine and handle for quick storage - Including sharpening device to reduce feed force - Device for back grinding of the drill cuttings to reduce the friction between the drill and the workpiece - Rotor with precision ball bearings Delivery: - Grinding wheel CBN - 20 collet pliers ER 40, 13 - 32 mm - collet holder ER 40 Optional extension, at extra cost: - collet set 5pcs. 8.0 / 9.0 / 10.0 /11.0 /12.0 mm

Mikron WF31D Precision Milling and Drilling Machine Machine with chips and splash guard cabin Equipped with a Heidenhain TNC355 controller Technical Specification The WF 31 D is a precision milling and drilling machine for series production and CNC training. Driven by an automatically shifting step gearbox and Poly-V belts. Vertical spindle can be extended by 90 mm; Conversion from vertical to horizontal machining possible. Ball screws with DC drives allow simultaneous feed movements. Guides are protected against dust, chips and coolant. Specifications Manufacturer: Mikron Type WF31D Control: Heidenhain TNC 355 Longitudinal movement (X): 560 mm Transverse movement (Y): 500 mm Perpendicular movement (Z): 400 mm. Drive power: 3.3/4.0 kW Speed range: 40-4000 rpm Feed speed: 2-3000 mm/min Rapid traverse speed X/Y: 6000 mm/min, Z: 5000 mm/min. Electrical equip ...

Work wave for Rego stop machine SM outdated / new

Grinding length 500 mm Grinding width 250 mm Workpiece height 375 mm max. table load 350 kg Table longitudinal movement 525 mm Table feed 2-28 m/min Total power requirement 4.5 kW Machine weight approx.1900 kg Control NC Height: approx.2.60 m Width: approx. 2.10 m Depth: approx. 2.00 m Total weight with cooling lubricant container: approx. 2.3 t.

GARBOLI LPC 500 tube polishing machine was built in 2021 in Italy by BRUSA & GARBOLI. The machine is designed for the precision surface treatment of straight and bent tubes made of, among others, stainless steel and aluminium. The specially designed system of dry grinding, consisting of two opposing abrasive belts, ensures an even surface finish without any distortion, even on larger tubes. On the other hand, daily operation of the machine is facilitated by an intuitive control panel designed for precise setting of the working parameters. The BRUSA & GARBOLI tube grinding machine weighs 455 kg. Technical specifications of the GARBOLI LPC 500 orbital tube polishing machine - maximum tube diameter: 203 mm - minimum tube diameter: 10 mm - minimum tube radius: 225 mm - abrasive belt size (L x W): 1500 x 90 mm - control panel - main motor power: 9.7 kW - power supply: 400 V; 50 Hz  ...

Drilling capacity max.: 30 mm Thread cutting: M 14 Tool rear ham: MK 3 Spindle speeds, infinitely variable: 150 - 2500 rpm Extension: 265 mm Drilling depth: 150 mm Pinole feed: 0.05 / 0.1 / 0.2 mm/U Column diameter: 92 mm Table size / T-slot size: 500 x 400 mm / 14 mm Engine power: 1.5 kW Machine dimensions (W x D x H): 640 x 850 x 1850 mm Weight approx.: 265 kg Characteristics: - Vario drive for infinitely variable adjustment of the desired speed - Pinole delivery either by hand or by mechanical feed - Set speed by means of digital display quickly and easily readable - Stable casting table with T-slots and coolant gutter - Adjustable drilling depth stop, drilling depth can be read by scale - Thread cutting device - CE / IEC, German documentation and German service Delivery: - Quick-clamp chuck 1 - 16 mm / B 18 - Drill chuck mandrel MK 3 / B 18 - Coolant dev ...

Steel window folding bag for TH 78 Built: 2007

Technical data: Fixed angular table: Fixed angular table clamping area: 800 x 400 mm Max table load: 200 kg Working spindle: Tool holder horizontally and vertically: ISO 40 Power of the main drive motor / 100% ED: 2.2 kW Vertical milling head: Speed range, tiered: (12) 50 - 2000 rpm Drill pinole, stroke: 100 mm Swivel range: +/- 90° Travel: X-axis automatic/man.: 385/400 mm Y-axis automatic/man.: 185/200 mm Z-axis automatic/man.: 365/380 mm Feeds: Feed range: 0-650 mm/min Number of feeds: infinitely adjustable Rapid response: 1000 mm/min Characteristics: - Machine accuracy according to DIN 8615 - 3-axis digital displays FAGOR® Innova (option) - Spindle run max. 0.005 mm, incl. test protocol according to DIN 8615 (rolling bearing SKF®/NSK®) - Vertical milling head can be swivelled out for horizontal milling (without d ...

Used ILLIG RDK 54 Thermoforming Line, Age 1995 Unwind Stand Indramat Servomotor Indexing Max. Film width 610 mm max. Thickness range 0.18 to 2.5 mm. Hardened Transport Rails, Double Heating, Heating Load 41.0 kW. Heaters move forwards automatically with pneumatic control Sheet Sag Control Form Area 550 x 400 mm Forming & Punching in Mold with integrated Steel Rule Die. Positive Draw 20 mm, Negative Draw 20 to 40 mm Trimming Force 50kN. Top and Lower Platens Moved by separate Indramat Servomotors Heavy duty Toggles on both upper & Lower Platen Stacking/ Counting Station Waste Material Winder Inline ILLIG RS75b Grinder with Sound Proof Housing & Controls. Suitable for PS, OPS, PP, PE, PVC etc.

Drilling capacity max.: 35 mm Thread cutting: M 24 Tool rear ham: MK 4 Spindle speeds, infinitely variable: 65 - 2000 rpm Extension: 265 mm Drilling depth: 150 mm Pinole feed: 0.05 / 0.1 / 0.2 mm/U Column diameter: 115 mm Table size / T groove size: 685 x 485 mm / 14 mm Engine power: 1.5 kW Machine dimensions (W x D x H): 950 x 580 x 2000 mm Weight approx.: 385 kg Characteristics: - Vario drive for infinitely variable adjustment of the desired speed - Pinole delivery either by hand or by mechanical feed - Set speed by means of digital display quickly and easily readable - Stable casting table with T-slots and coolant gutter - Adjustable drilling depth stop, drilling depth can be read by scale - Thread cutting device - Gearbox pre-bed - CE / IEC, German Documentation and German Service Delivery: - Table clamping and height adjustment from the front - Quick-clam ...

Grinding machine Löwer double-sided Type: DSM 2000 Year of Make: 1996 CE Grinding width 190 mm Grinding thickness – material thickness 2 – 180 mm Sanding belt dimensions 200 x 1800 mm Wear-free ceramic sanding shoe (no graphite coating necessary) Motorized height adjustment 0.37 kW Workpiece length min. 300 mm Feed speed 6/11/16 m/min. Sanding belt drive 2 x 5.5 kW / 400 V Sanding belt speed 22 m/sec. 1 sanding shoe and cleaning brush from above 1 sanding shoe and cleaning brush from below Blow-off device in front of the outlet Suction nozzle diameters 2 x 150 mm and 2 x 120 mm Inlet height 850 mm Total connected load approx. 14 kW Incl. workpiece return consisting of inclined chute and return roller conveyor good, ready-to-use condition Machine dimensions: L 2070 mm x W 920 mm x H 1890 mm Weight approx. 1500 kg

Figure shows precision flat grinding machine: FSM 2550 AH Table size: 300 x 600 mm Installation height: 500 mm Max table load: 300 kg Engine power: 4.6 kW Connection: 400 V Dimensions: 2300 x 1790 x 2200 mm Weight, approx.: 2000 kg Equipment and scope of delivery: - All castings, such as machine stand, table, etc. made of MEEHANITE® quality casting - Automatic cross and longitudinal feed - Permanent lubrication - Automatic cross-stroke device - Rear splash protection - Grinding wheel - Grinding wheel flange - Pulling device - Balancing mandrel - Balancing scales - Dressing diamond - Machine light - Nivilier elements - Operating tool - Operating instructions - CE Special equipment of our storage machine: - Electric magnetic clamping plate 300 x 600 mm (fine pole) - 2-axis digital display, accuracy 0.001 mm, X 450 / Y 500 mm - Automatic verti ...

Broken Ice Machine + Silo & Ice Truck Manufacturer: ZIEGRA Type ice cream maker: ZBE 350 EV 20°C Silo type: ITS 700 Specifications: 400V / 50Hz / max. 1.0A Year of manufacture: 2023 Total dimensions: H249 x W85 x D125 cm Coolant: R 744 Ice machine for connection to a CO2 refrigeration system or individual unit Machine design Completely stainless steel Surface ground Output approx. 350 kg / 24 hours at 20°C air & 15°C water Silo capacity: approx. 700 kg Compact design Designed for continuous operation - 24 hours - 7 days a week Height-adjustable machine feet Stock machine, immediately available! Function checked / machine is ready for use! Condition and accessories see original pictures!

Transit Ultrasonic Banderolier ATS US 2000 AB TR; good condition; maintained and checked by ATS Customer Service in Heidelberg; Frame 360x260mm; Bandwidth 15mm. Transit ultra sonic banding machine ATS US 2000 AB TR; good condition; cleaned and checked by the support of ATS Heidelberg; frame 360x260mm; band width 15mm.

Graham labeler COUV 128-40 with tripod, Y.O.M. 2001

ITALMEC TSR 300/1+6 wire drawing line was built in 2020 in Poland by EJP Italmec Sp. z o.o. The purpose of the line is to reduce the diameter of various types of wire, i.e. steel wire or welding wire, by pulling it through a series of rollers. This process is performed fully automatically, thanks to the use of two additional devices – a wire pay-off and a wire coiler. The wire drawing line consists of the following parts: 1. ITALMEC TSR 300/1+6 wire drawing machine 2. ITALMEC SB2C vertical static wire pay-off with compensator 3. ITALMEC AHSC 30 horizontal static wire coiler The ITALMEC wire pay-off with rotating arm precisely unwinds material from spools, coils or racks towards the drawing machine without stopping it. It is equipped with a special device that stops the machine in case of wire breakage and a compensator that accumulates the amount of wire necessary to stop the  ...

WWM TS 560/8-1 wire drawing machine was built in 2014 in Italy by WWM Technology Srl (now EJP Italmec Sp. z o.o.). The machine is used in the process of reducing the diameter of various types of wire by pulling it through a series of rollers. Once reduced to the appropriate diameter, the wire is confectioned directly onto a carousel or stand. The wire drawing line consists of the following machines: 1. WWM TS 560/8-1 wire drawing machine 2. WWM SV5 vertical static wire pay-off 3. WWM DSM 01 mechanical descaler 4. WWM AF 1000 wire coiler Wire feeding precision is ensured by the WWM wire pay-off, which consists of two tilting drums and a central column. It enables easy loading of material coils weighing a maximum of 3000 kg each, without stopping the drawing machine. During threading, the sheave and basket are lowered by a hoist with AC motor. The scale on the entire surface of t ...

PAGO 15/120E-x side labeler from 2011 Label height: 120mm Can be used for many purposes such as; carton labeling, adjusted to label bottles and other products Attached with a Thermic Transfer printing module Delivered with documentation Condition: good Dimensions: 650mm x 420mm & 570mm (LxW&H)

Delford Labeler Sortaweigh Concept 500, MDLA0140 with Siemens TD 200 Control, stainless steel mobile stand, for hobbyists

Folding machine MBO T 800.1 6-6-4, year of construction 2005, pallet feeder, navigator control, 1. Folding unit 78/6 VN, 6 pockets, upstream and downstream knife shaft, 1 window rebate pocket for 1st or 2nd plant, gluing device HHS prepared, 2. Folding unit 78/6 VN, 6 pockets, upstream and downstream knife shaft, 3. 56/4 RFE folding unit, 4 pockets, sheet recirculation, noise insulation device, compressor, Blobreukrrks Sb Nwkeh 4. MBO SBAP 72 ME, mobile standing arch delivery, year of construction 2005, press rollers at call If you are interested, we will also be happy to inform you about other machines in our company. You are welcome to visit the machine in our house by prior appointment.

Vertical -consol milling machine, used    Vertical -milling machine, used Make/make: WMW HECKERT Type/ model: FQS 400 Year built: 1978 Control type / control: conventional   x-way: 1190 mm   y-way: 530 mm z-way: 540 mm Table size/ table: 1600 x 400 mm Spindle power/ spindle power: 11kW Tool holder/tool taper: ISO 50 Speeds/ speeds: 28 - 1400 rpm Feeds: 16- 800 mm/min Total power requirement: 21 kW Machine weight: 4.8 t  

Thomas 310E

Max. size= 65 x 36 cm, Availability= 062025, 4 bags flat pile feeder with noise insulation devices tape delivery LOT Loaded in truck or container

optional with 2 to 10 stainless steel boilers with pliers lock with control cabinet Boiler capacity approx. 190 litres for max. 120kg dough or for a maximum of 75 kg flour with Eaton PLC control Machine is in very good condition

Unwind Stand Preheater ILLIG VHW 72/ 2 ILLIG RDM 70K, age 1989 Thermoformer with auto-start facility SEW Eurodrive Servomotor Indexing Max. material width 730 mm Max. Indexing length 300 mm Top & Lower heaters, total connected load top & bottom heaters 74.2 kW Drive Motor 6.93 kW Auto Transport Rail Spreading for PP Sheet Sag Control Max. Forming Area 680 x 280 mm Hydraulic Plug Assist, Max. Part height 125 mm Hydraulic Power Pack Control Cabinet with Optimised Schleicher (PLC) Controls Encoder on Main Shaft Auto Lubrication Pump. Inline ILLIG UG70b Counter/ Stacker Delivery Conveyor for Counted/ Stacked Cups with Ejector Table

used Rheon Free Divider VX 111 from 1998. With a long spout tape and a large funnel. We will be happy to send you further pictures and information on a request for comment. Stainless steel cladding mobile on wheels Flour bestuber digital control 380V - 50Hz - 3.5A Dimensions: Height: 180 cm Width: 445 cm Depth: 105 cm

Type MB506C Working width 600 mm Overall length 2500 mm Measurements of fence 880x110 mm Fence tilting 45° Number of knives 3 Speed of spindle Motor power 4 kW

GEMA GP 100 semi-automatic pallet wrapping machine was built in 2012 in Poland by GEMA sp. z o. o. This highly efficient machine is an indispensable tool in various types of warehouses and logistics centres. This is because it makes it possible to wrap loads with a maximum weight of 1500 kg in stretch film, increasing their safety and stability during transport. The process is performed by the machine semi-automatically. The GEMA pallet wrapping machine weighs 500 kg. We have two of these machines for sale. The price included in this advertisement is for one unit. Technical specifications of the GEMA GP 100 stretch wrapping machine - maximum wrapping height: 2200 mm - maximum load diagonal: 1650 mm - maximum load weight: 1500 kg - maximum film roll diameter: 270 mm - film thickness: 7-30 μm - rotary table height: 70 mm - rotary table positioning accuracy (with 1000 kg load) ...

Type MB505C Working width 500 mm Overall length 2500 mm Measurements of fence 880x110 mm Fence tilting 45° Number of knives 3 Speed of spindle Motor power 4 kW

Type MB504C Working width 400 mm Overall length 2500 mm Measurements of fence 880x110 mm Fence tilting 45° Number of knives 3 Speed of spindle Motor power 4 kW

For sale Log Reducing Machine BRUKS RR800 – completely overhauled On offer is a fully refurbished BRUKS RR800 buttflare reducing machine for processing round timber. The machine has been overhauled and is ready for immediate use. It is ideal for use in sawmills, biomass plants or for pre-processing trunk wood with strong root shaping. Specifications Model BRUKS RR800 Maximum trunk diameter 700 mm measured at 1500 mm distance from the end of the trunk Minimum trunk length 3.2 m Maximum trunk length 6.2 m Maximum reduction 200 mm Capacity at feed rate 60 m per minute approx. 4 logs per minute at 60 cm diameter Capacity at feed rate 30 m per minute approx. 3 logs per minute at 60 cm diameter Number of cutting tools 30 pieces Tool width 60 mm Cutting motor 37 kW Chain drive via geared motor 2.2 kW Hydraulic power unit 5.5 kW Total weight including main drive approx. 500 ...

Siemens AXIOM Aristos FX Plus with the following device components: Generator Polydoros LX 30/50 Tube Opti 150/30/50 HC 0.6/1,0_Year of manufacture 2014 (ceiling-hanging) Vertical stand Aristos FX (ceiling-hanging) 1 Detector Trixell Pixium 4600 43x43 cm_Product No. 100204 • The system was tested before dismantling of our employees on site. • It is located in our warehouse in Germany, packaged on pallets properly lashed down and wrapped in stretchfoil and can be picked up immediately. • You buy the equipments in "as in" condition from stock Freiberg (EXW), Saxony, Germany, and prepayment. • We are a used medical device dealer. We do not service or refurbish any of the items that we sell. All items are sold used and in as-is condition, unless otherwise stated. We do not offer or imply any guarantees or warranties on any equipment sold. It is the responsibility of the b ...

Control UCC lite-2 Measuring range 700 x 450 x 350 mm Measuring heads (MH20i, PH1, PH6) Various touch probes

Length 300 mm Width 40/60 mm Roughness P80/P120/P150/P240/P320 Holder 4,5 mm Length 300 mm Width 40/60 mm Roughness P80/P120/P150/P240/P320 Holder 4,5 mm 40 mm: Price 60 Eur (EXW Jonava, Lithuania) 60 mm: Price 68 Eur (EXW Jonava, Lithuania)

For sale Log Reducing Machine BRUKS RR800 – completely overhauled On offer is a fully refurbished BRUKS RR800 buttflare reducing machine for processing round timber. The machine has been overhauled and is ready for immediate use. It is ideal for use in sawmills, biomass plants or for pre-processing trunk wood with strong root shaping. Specifications Model BRUKS RR800 Maximum trunk diameter 700 mm measured at 1500 mm distance from the end of the trunk Minimum trunk length 3.2 m Maximum trunk length 6.2 m Maximum reduction 200 mm Capacity at feed rate 60 m per minute approx. 4 logs per minute at 60 cm diameter Capacity at feed rate 30 m per minute approx. 3 logs per minute at 60 cm diameter Number of cutting tools 30 pieces Tool width 60 mm Cutting motor 37 kW Chain drive via geared motor 2.2 kW Hydraulic power unit 5.5 kW Total weight including main drive approx. 500 ...

BRUKS RR 300 Root Reducer Core: - Processed wood lengths: 2.5 to 14 m (with extension part from 6 m) - Maximum trunk thickness: 900 mm (1,200 mm at root ends) - Fully automatic cross pass with integrated log ejector - Intelligent milling technology: adaptation to natural trunk shape (maintains curvature) - Flexible loading by crane/forklift + radio remote control (on request!) - Robust construction: Heavy rectangular tube frame + side hold-down arm Specifications: Reduction time per log: Ø 30 cm: 29 seconds Ø 60 cm: 37 seconds Milling unit: 45 kW motor (1,500 rpm) 36 milling blades (60 mm width, can be used on 4 sides) Drive system: 2 lower rotation chains with carriers Trunk rotary motor: 2.2 kW (8 m/min) Hydraulics: 5.5 kW / 28 l/min Weight: 4,000 kg (basic machine) + 1,000 kg (extension) Scope of delivery: - Factory tested and adjusted (incl. hydraulic  ...

Plate diameter 4200 mm Maximum turning diameter 4600 mm Max workpiece height under the cross member 4000 mm Max workpiece weight 100 t Travel RAM horizontal 2600 mm / min Travel RAM vertical 2000 mm / min Tool holder (powered tools) ISO 50 Table speed 40 rpm Main drive 120 kW Number of gear stages 4 Total connection value 180 kW Max torque on the flat disc 40000 kpm Max cutting force per support 10000 kp Crossbar support right and left Largest vertical path of the Chisel slider 2000 mm Cross-section of the chisel slider 285 x 310 mm Adjustment path of the crossbar 3500 mm Total weight of the machine 115,800 kg Accessories Automatic lubrication of the cross-bar guide on the stand Hydraulic weight compensation of the chisel sliders Milling spindle and C-axis c-axis 360,000 positions

Table diameter 2,000 mm Max. Turning diameter 2,150 mm Turning height 1450 mm Table speed 3-140 rpm Max. weight of the workpiece 12000 kg Milling spindle: Maximum speed 2,000 rpm Milling spindle Motor power 22 kW Total weight of the machine approx. 34,000 kg Machine complete with: C-axis: 360,000° Milling spindle 22 KW Tool changer 16 positions Tool changer for milling tools ISO 50 16 positions Complete cladding Conveyor Complete cooling system with filtration

ZM punch grinder

Specifications: Manufacturer: Weisser Type: Univertor AM-1L Year of Make: 2020 Control: CNC control Siemens SINUMERIK 840D sl Travels: X 1,700 mm Z 500 mm Spindle unit left side of the machine Speed Limit| 3,500 rpm Rated speed: 780 rpm Torque: 430/610 Nm (100/40% ED) Spindle bearing Ø: 120 mm Spindle flange: A8 according to DIN 55026 Dressing unit Max. speed: 16,000 rpm Dressing disc holder Ø: 40 x 10 mm Revolver Target turret: 12-speed Drive: electric swivel drive Internal grinding spindle with grinding software Tool holder: D28/43 (thread M28x2) Spindle bearing Ø: 45 mm in hybrid version Speed limit: 45,000 rpm. Rated speed: 30,000 rpm Drive power: 15/18 kw (100/60 % ED) Torque| 4.7/5.7 Nm (100/60% DC) External grinding spindle with grinding software Tool holder taper: 1:10; Ø 73 mm Spindle bearing Ø: 80 mm in hybrid version Speed limit: 6,00 ...

Center height 660 mm Distance between the centers length 12000 mm Turning diameter 1320 mm Turning max. via support 950 mm Clamping max. 1200 Power 55 KW Torque 35000 Nm Bezel I 200-630 mm Workpiece weight 21 to Accessories: Conveyor

Type MB104H Max working width 400 mm Knives 4 Feed speeds 7/14 m/min Min./max. working height 3,5-300 mm Main motor power 4 kW Suction hood diameter 100 mm

The machine is in good technical condition, a test run is possible by prior arrangement. Hours: 8,981 Upper driven tool turrets with Y-axis, lower driven turret, double slide with two spindles. Control: FANUC 31i-B. Max. circumferential diameter above the bed: 300 mm Max. circumferential diameter over the support: 230 mm Max. turning diameter above the bed with upper turret: 230 mm Max. turning diameter above the bed with lower turret: 230 mm Max. turning length: 600 mm Max. distance between the ends of the right and left spindle: 980 mm Milling area outside the axis of rotation due to Y-axis: 100 mm (+/- 50 mm) Max. rod diameter (left spindle): 65 mm Max. rod diameter (right spindle): 65 mm Max. permissible workpiece weight without sub-spindle (incl. chuck weight = 23 kg): 12 kg Total weight: 7,800 kg Accessories: SS 2500 bar feeder, length 200–1 ...

Center height 660 mm Center width 11000 mm Turning diameter 1320 mm Turning max. via support 950 mm Power 55 KW Torque 35000 Nm Clamping max. 1200 Workpiece weight 14 to Accessories: Bezel 200-630 mm

Continuous/normal drilling power (mm) R1 (gemes. Drehmom. Nm) 30/35 (in E3335/ST60) (135) R2 (gemes. Drehmom. Nm) 27/32 (in E335/ST60) (90) Thread cutting performance max. (slope-dependent) R1 M30x3.5 R2 M24x3 Spindle MK IV Drilling depth (mm) 160 Extension (mm) 300 Column diameter (mm) 140 Usable table area (W x D) (mm) 590 x 450 Speed display digital Drilling depth display digital Drilling depth stop with fine adjustment Table height adjustment with rack Spindle/table (mm) 150-700 Machine dimensions without VP (mm) 610 x 900 x 1,980 mm Machine dimensions with VP (mm) 670 x 1,100 x 2,200 mm Motor rotary current 400V with frequency inverter (kW) 4.0 Spindle speeds infinitely variable R1 (1-stage) 0-1000 rpm R2 (1-stage) 0-1600 rpm Feed by hand Weight (kg) 400 Optional (780 EUR) drilling package 5,beststretched from: Vice [felix] 125 Cone mandrel MK III/B ...

Blade length 205 mm Max cutting performance Sheet R = 42 kg / mm2 4 mm Sheet R = 70 kg / mm2 3 mm Engine power 3 kW Number of beats / minutes 50 min Table dimension 625 x 954 mm Capacity of the oil tank 25 l Weight 500 kg The setting between the blades is fully automatic. Standard: - 1 set of knives at 30 ° (mounted on the machine) - 1 stop switch - 1 general circuit breaker - 1 stop adjustable and adjustable every 15° - Fill the first oil - Manual with installation and maintenance instructions and service keys.

The machine is in good technical condition, a test run is possible by prior arrangement. (spindle 32 mm) + Mitsubishi E60 control. Bar feeder included – for bars up to 3000 mm! Max. turning diameter: 60 mm Max. turning length: 120 mm Circulation diameter over cross slide: 120 mm X-axis: 170 mm Z-axis: 170 mm Spindle bore: 34 mm Max. bar diameter when using the loader: 32 mm Spindle holder: diameter 85 mm Spindle motor: 3.7 kW Spindle speed: 100–5,000 rpm Rapid traverse (X and Z axis): 15 m/min Min. program input: 0.001 mm Max. tool diameter: 16 mm Machine dimensions (L x W x H): 1200 x 1000 x 1500 mm

Bread slicer Wabäma Type Piccolo 380.10 HA MB Cutting width 10mm semi-automatic 230 Volt 0.75 kW

Automatic Cutting width 9mm 192 kg 1.1 kW 400 Volt - 50 Hz

Cutting width adjustable from 4-14 mm analog control Sickle knife machine Stainless steel cladding on rolls with traces of usage Voltage 400V / 50Hz