subcategories
(3rd category level)
Manufacturer:
(Category: 1200)
4.000 litre, Stock number: T3815, Litre: 4.000, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Tank, Standing: 3 pcs. legs, Top: Conical, Bottom: Conical, Insulated: Yes, Outer cladding: Fully welded stainless, Tank cover: In the top, Ø 450 mm., Turbolence plate: Yes, Agitator: Yes , Agitator type: 3-bladed propeller, Motor: 0,55 kW - 230/400 Volt - 140 rpm., CIP: Yes, Inner diameter: Ø 1800 mm., Outer diameter: D 1900 mm., Total height: 2800 mm.
2.400 litre, Stock number: T3721, Litre: 2.400, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Tank, Standing: 3 pcs. of legs, Top: Open with strengthening ring, Bottom: Conical, Agitator: Yes, Agitator type: Frame agitator with bottom guideway, Motor: 2,2 kW - 220/380 Volt - 108/18 rpm., Working temperature: 20° C, Inner diameter: Ø 1400 mm., Total height: 2050 mm., Manufacturer: Kronjysk Stål I/S, Year: 1984
3.200 litre, Stock number: T3433, Litre: 3.200, Material: Stainless acid proof steel AISI 316, In stock: Yes, Amount in stock: 1 pc., Item: Tank, Standing: 3 pcs. legs, Top: Open with hinged lid, Bottom: Conical, Inner diameter: Ø 1420 mm., Total height: 2730 mm.
Suction capacity: 3000m³/h, blower capacity (free-blowing): 4000m³/h, differential pressure: 1750Pa, dust storage capacity: 95l, filter cartridges: 2, machine dimensions X/Y/Z: approx. 1050mm/850mm/3000mm, weight: approx. 230kg. Documentation available. An on-site inspection is possible.
8.000 litre, Stock number: T3237, Litre: 8.000, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Tank, Standing: 4 pcs. legs, Top: Conical, closed, Bottom: Conical, Double jacket: Yes, Insulated: Yes, Outer cladding: Fully welded stainless, Tank cover: In the top, Agitator: Yes , Agitator type: Double frame agitator, Agitator placement: From the top, CIP: Yes, Inner diameter: Ø 2355 mm., Outer diameter: D 2486 mm., Total height: 3200 mm., Manufacturer: SBQ, Other: The outer cladding of the tank is slightly dented
Single-drive, ladle-type dissolver made by PENDRAULIK, model: DWDV 10, for 200 liters barrels. Main drive power (dispersing disc): 5 kW, adjustable speed. Barrel capacity: 200 liters.
Used single-drive dissolver made by ZANELLI for 200 liters barrels. Main drive power (dispersing disc): 13 kW, adjustable speed.
Rated power: 75kW, max. operating overpressure: 8.5bar, speed: 3000rpm, operating hours: 75122h, load hours: 72719h. The machine requires bearing replacement. Documentation available. An on-site inspection is possible.
Bofa AD Oracle iQ fume extractor, air filter, dust collector for laser or other. In new condition, with new filters. Manufacturer: Donaldson Bofa Type: AD Oracle iQ Voltage: 115-230V Unlimited airflow (+/- 10%): 410 m3/h Adjustable airflow range: 100-380 m3/h Pressure (+/- 10%): 95 mbar Dimensions (H x W x D): 975 x 455 x 505 mm Weight (+/- 5%): 65 kg Noise level:
56 litre, Stock number: R457, Litre: 56, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Mixer, Standing: 3 pcs. legs, Top: Open with 2 pcs. hinged lid, Double jacket: Yes, Agitator: Yes, Agitator type: Frame agitator, Agitator placement: In the top, Motor: 0,55-0,75 kW - 380 Volt - 80 rpm., Inner diameter: Ø 600 mm.
250 litre, Stock number: R1137, Litre: 250, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Mixer, Standing: On stainless leg frame, Motor blender: 2-speed, 5/6,3 kW - 380 Volt - 1440/2905 rpm., Motor mixer: 2-speed, 10/12 kW - 380 Volt - 88/176 rpm., Inner diameter: Ø 890 mm., Manufacturer: Diosna, Type: P250A, Other: With control cabinet
Manufacturer: Walter Metz Type of Machine : Container Washing System Condition : New Compatible with pallets and large four-wheel containers (660L & 1100L) Find more here - / Contact us at -
12.700 litre, Stock number: T3975, Litre: 12.700, Material: Stainless acid proof steel AISI 316, In stock: Yes, Amount in stock: 4 pc., Item: Tank, Standing: 5 pcs. legs, Top: Conical, Bottom: Conical, Tank cover: In the side, 500 x 380 mm., Inner diameter: Ø 2350 mm., Total height: 3800 mm., Manufacturer: Furhoffs Rostfria
Used fluidised bed dryer mady by Bühler, model OTWG-280, new 1995. The dryer consists of a blower, piping. All elements are made of acid-resistant sheet metal, the blower is resistant to high temperatures. The whole set is manufactured by Buhler. Technical data: - Weight 1750 kg - Content m³: 6 - Max. operating vacuum up to 250°C. bar: + 0.1 - Max. operating vacuum up to 150°C. bar: - 0.1 - Max. operating temperature: 250 C°.
Manufacturer: Krauss Maffei Model: 800-5700 MC Year of Manufacture: 1999 Technical Data - Clamping Force: 8000 kN - Platen Size: 1600 × 1510 mm - Tie Bar Distance: 1120 × 1000 mm - Mold Height: 600 – 1100 mm - Daylight (Platen Opening): 2000 mm - Total operating hours (machine switched on) : currently 02,193.40 - Operating hours in production : currently 82,849.13 - Heating Capacity: 59 kW - Control: MC4 Injection Unit - Screw Diameter: 105 mm - Shot Volume: 3611 cm³ - Injection Pressure: 1580 bar - Dimensions (L×W×H): 10.15 × 2.86 × 2.40 m - Pump Drive Power: 110 kW - Oil Tank Capacity: 2000 L - Machine Weight: approx. 45 tons Features / Extras - 8 temperature control zones + 2 additional zones for plasticizing heating - 4 core pulls with movable platen - Hydraulic rotary bolt shut-off nozzle (HSVS) - Air valve (1x on movable platen, WAP) - T-slots in clamping plates ac ...
A Rico compressor system consisting of two Atlas Copco compressors, two refrigerant dryers and an Atlas Copco Beko oil-water separation system is available. Screw compressor Atlas Copco GA 45 VSD+, year of manufacture: 2020, air volume flow: 9.4m³/min, operating pressure: 13bar, motor power: 45kW, motor speed: 4500rpm, machine dimensions X/Y/Z: approx. 1200mm/1100mm/2000mm, weight: approx. 860kg. Screw compressor Atlas Copco GA 45 VSD FF, year of manufacture: 2012, power: 45kW, operating pressure: 18.5bar, speed: 3000rpm. 2x refrigerant air dryers Atlas Copco FX 15, air volume flow: 15m³/min, operating overpressure: 13bar, pressure drop: approx. 0.3bar, refrigerant: R410A, refrigerant charge: 2050g, max. inlet air temperature: 60°C, machine dimensions X/Y/Z: approx. 900mm/750mm/1000mm, weight: approx. 160kg. Compressor management system Atlas Copco Equalizer 4.0/ES6-MK5, control range ...
Stock number: R660, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Agitator, Agitator placement: For edge mounting, Propeller size: Excl. propeller, Motor: 1,5 kW - 220/380 Volt - 1400 rpm. , Manufacturer: Veenstra Roerwerken
A compact and mobile BWT reverse osmosis system including integrated tank is available. Throughput capacity: approx. 160l/h, recovery (WCF): 40%-75%, salt retention rate: over 98%, permeate conductivity: below 20µS/cm, tank volume: 50l, membranes: 1. Machine dimensions X/Y/Z: approx. 350mm/560mm/750mm, weight: approx. 55kg. Documentation available. An on-site inspection is possible.
A Wolf exhaust unit for wet rooms is available. Air volume flow: 1000m³/h, pressure loss (external): 200Pa, motor power: 0.25kW, motor speed: 1500rpm. Documentation available. An on-site inspection is possible.
Process chiller / chiller air-cooled, Type: TAEevo Tech 201P3-20 MTA S.p.A. TAEevo Tech 201 P3-20 are air-cooled compact water chillers suitable for outdoor installation (from -5°C to +46°C). Including crank tray heating, phase monitoring, buffer tank 350 ltr. and built-in P3 circulation pump. Cold water outlet temperatures from -10°C to +30°C are adjustable. Cooling capacity kW 44.2 Cold water temp. Exit/Entry (°C): 7 / 12 Volume flow (m³/h) 7.53 Available pump pressure (bar) 2.67 Ambient temperature (°C) 32, Refrigerant R 410A, Electrical data: Voltage V 400, frequency Hz 50, phases Ph 3, Max. power consumption (kW) 23.69 Max. current (A) 39.83 Starting Current Circuit (A) 134.4 Protection class: IP54 Dimensions: Length (mm) 2250, Width (mm) 866, Height (mm) 2054, Weight (kg) 998 Connection Rp 2" Serial No.: 2200412190 Year of construction 2 ...
Used microfiltration made by Intermasz type MF 1137231178 UNT. New 2013. Milk and whey microfiltration installation. Capacity: 10,000 l/h. Filtration area: 13 m³. Weight: 950 kg.
MODITEC shredder type BIGGER 10 Year: 08-2004 Voltage: 400V Power: 5.5 KW Weight: 1800 kg
Used twin-screw mixer made by Müllner & LUX KG, type LM 40. New 1990. Two motors 7,5 kW.
348 litre, Stock number: T3937, Litre: 348 , Material: Stainless acid proof steel AISI 316, In stock: Yes, Amount in stock: 1 pcs., Item: Tank, Standing: 4 pcs. legs, Top: Dished, Bottom: Conical, Double jacket: No, Insulated: No, Tank cover: In the top Ø 255 mm., Agitator: No, CIP: Yes, Working temperature: -15/100° C, Working pressure tank: 0,5/-1 bar, Inner diameter: Ø 630 mm., Total height: 1250 mm., Manufacturer: G.A. Rustfri, Year: 2009
348 litre, Stock number: T3938, Litre: 348 , Material: Stainless acid proof steel AISI 316, In stock: Yes, Amount in stock: 1 pc., Item: Tank, Standing: 4 pcs. legs, Top: Dished, Bottom: Conical, Double jacket: No, Insulated: No, Tank cover: In the top Ø 255 mm., Agitator: No, CIP: Yes, Working temperature: -15/100° C, Working pressure tank: 0,5/-1 bar, Inner diameter: Ø 630 mm., Total height: 1250 mm., Other: Severed handle, Manufacturer: G.A. Rustfri, Year: 2009
1.500 litre, Stock number: T3808, Litre: 1.500, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Tank, Standing: 4 pcs. legs, Top: Open with lid and strengthening ring, Bottom: Conical, Turbolence plate: 1 pc., Agitator: Yes, Agitator type: 3-bladed propeller, Motor: 1,1 kW - 230/400 Volt - 925 rpm., CIP: Yes , Inner diameter: Ø 1350 mm., Total height: 1870 mm.
Used drum screen made by Bühler, 1 drum. Very good condition.
925 litre, Stock number: T4009, Litre: 925, Material: Stainless acid proof steel AISI 316, In stock: Yes, Amount in stock: 1 pc., Item: Tank, Standing: 3 pcs. legs, Top: Dished, Bottom: Dished, Double jacket: Yes, Insulated: Yes, Outer cladding: Fully welded stainless, Tank cover: In the top, Ø 245 mm., CIP: Yes, Working temperature: 2-130° C, Working pressure tank: -1 - 5 bar, Working pressure double jacket: 0-3 bar, Inner diameter: Ø 900 mm., Outer diameter: D 1000 mm., Total height: 1750 mm., Other: Prepared for magnet agitator, Manufacturer: Dan Process/KOFA, Year: 1994
750 litre, Stock number: T3849, Litre: 750, Material: Stainless acid proof steel AISI 316, In stock: Yes, Amount in stock: 1 pc., Item: Tank, Standing: 3 pcs. legs, Top: Conical with hinged lid, Double jacket: Yes, Insulated: Yes, Outer cladding: Fully welded stainless, Agitator: Yes, Agitator type: Top: Propeller, Bottom: Anchor agitator with scrape, Motor: Top: 0,37 kW - 220/380 Volt - 680 rpm., Bottom: 1,5 kW - 220/380 Volt - 28 rpm., CIP: Washingwing from top, Working temperature double jacket: 60° C., Working pressure double jacket: 3 Bar, Inner diameter: Ø 1100 mm., Outer diameter: D 1220 mm., Total height: 1880 mm., Manufacturer: SRS, Model/type: BKI-DJ, Year: 1994
