machine forging used for sale

Headop Automatic Feeder With 4 x 4 Openings Opticontrol for pile control Siemens electronic control Job memory Automatic sheet change Lap opener Mechanical opening Colour touch screen Maximum sheet size 510 x 320 mm - 150 x 75 mm 10 x stitches Speed : 180 cycles per minute

Number of winding stations: 36, operating voltage: 400V, current: 30A, frequency: 50Hz. Equipment: Fastflex, Digicone. Inspection possible by appointment.

End-facing slides: 7, upper chamfering slides: 3, lower chamfering slides: 3. Inspection possible by appointment.

TRUMPF TRUMATIC L 3030 – CNC laser cutting machine – built in 1999 For sale is a TRUMPF TRUMATIC L 3030 CNC flatbed laser cutting machine from 1999. Basic technical data: Manufacturer: TRUMPF Model: TRUMATIC L 3030 Year of Make: 1999 Machine Type: CNC Laser Cutting Machine Laser type: CO₂ laser Working range: 3,000 × 1,500 mm Travel Z-axis: approx. 115 mm Maximum workpiece weight: approx. 710 kg Control: Siemens Laser power: 3,800 W Operating hours: 73,392 h Other information: Machine condition: used Functionality: defective / has various error messages Accessories: automatic pallet changer, extraction and filter system, cooling, cutting heads Location: 35708 Haiger Viewing possible by prior arrangement.

BN 102 C Producer Tos Swing 280 mm Distance between centres 630 mm Cross table adjustment 250 mm Longitudinal table adjustment 510 mm Vertical milling head adjustment 290 mm Machine weight 1000 kg

Bohrleistung in Stahl (-Ø: 45 mm throat: 1250 mm workpiece height max.: 1100 mm swival range +/-: 360 ° height adjustment: 745 mm base plate surface area: 1450 x 920 mm Bohrspindel-Ø/ Aufnahme: 90 mm / MK 5 bore spindle stroke: 355 mm max. torque on the spindle: 250 Nm feed power: 14000 N turning speed range: 20 - 1200 U/min feed range: 0,063 - 0,63 mm/U power capacity: 3,7 kW weight of the machine ca.: 3,0 t dimensions of the machine ca.: 2,1 x 0,9 x 3,3 m • cube table 650 x 650 x 500 mm, • coolant device The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Bohrleistung in Stahl (-Ø: 50 mm throat: 1500 mm workpiece height max.: 1380 mm Bohrleistung in Guß (-Ø: 60 mm Abstand Spindelmitte bis Säule: 320 - 1250 mm swival range +/-: 180 ° base plate surface area: 2640 x 1000 mm max. torque on the spindle: 310 Nm Bohrspindel-Ø/ Aufnahme: 75 mm /MK 5 bore spindle stroke: 310 mm spindle turning speed range: 28 - 2500 U/min feed:: 0,05 - 2 mm/U power capacity: 4 kW weight of the machine ca.: 4,3 t cube table 500 x 500 x 500 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

For sale is a workshop-overhauled notching milling machine from the renowned manufacturer Elumatec, type AF223, built in 1998. As part of the workshop overhaul, the machine was dismantled, cleaned and reassembled. It was almost completely repainted. The bearings on the spindle and motor were replaced. The plate was professionally sanded and galvanized. Other galvanized parts were also largely re-galvanized. The following new parts have been installed: - Pneumatic cylinders - Guide rails and linear layers - Clamping cylinders and rubber buffers - Protective cover - Hinged lid - Mudguard - Protective sliders on the right and left - Protective slider on the side with brush - Lever at the stop - Lever on the front spindle - Bearings on the spindle - Protective hose - Scale on the plate - Scale at the stop - Regulator - Oiler - Small parts (bearing sleeve, spindle sl ...

General Description CNC cordon (weld seam) cleaning machine manufactured by URBAN GmbH & Co. , model SV 530 . Designed for automatic removal of excess weld material from PVC window and door frames after welding. Suitable for integration into automated PVC window production lines. Technical Details Manufacturer: URBAN GmbH & Co. Model: SV 530 Machine type: CNC cordon cleaning machine Machine No.: 530659 Power supply: 230/400 V, 50 Hz Installed power: 3.5 kW Control voltage: 24 VDC Protection class: IP54 Original URBAN CNC operator panel Automatic profile handling table Pneumatic system with pressure gauges Cleaning enclosure Integrated conveyor system Cable chain Automatic weld seam cleaning stations Condition Good used industrial condition. The machine appears complete with CNC control console, conveyor system, cleaning stations, pneumatic equipment and sa ...

Dear customers, here we offer you a new high-precision disc grinding machine for sale. This is a Swiss precision machine. They are designed for the processing of wood, plastic, Metal etc. and are used by model makers, designers, schools (handicraft lessons), engineering schools as well as metal and plastics processing companies for a wide range of tasks used. Here are some technical data: Grinding wheel: Ø300 mm Table dimensions: 170 x 420 mm Grinding table inclination: 0° – 45° top + bottom Motor power: 0.75 kW Motor speed: 1,500 min-1 Clockwise and counterclockwise rotation Voltage: 3 x 400 V, 50 Hz Suction nozzle: Ø60 mm Weight: 27 kg Optional: - Angle stop - Cylindrical grinding device - mobile machine stand Price plus VAT, which will be shown separately on the invoice. Free and insured shipping throughout Germany! If you have any questions, please  ...

Dear customers, here we offer you a new high-precision disc grinding machine for sale. This is a Swiss precision machine. They are designed for the processing of wood, plastic, Metal etc. and are used by model makers, designers, schools (handicraft lessons), engineering schools as well as metal and plastics processing companies for a wide range of tasks used. Here are some technical data: Grinding wheel: Ø400 mm Table dimensions: 225 x 550 mm Grinding table inclination: 0° – 45° top + bottom Motor power: 1.5 kW Motor speed: 1,500 min-1 Clockwise and counterclockwise rotation Voltage: 3 x 400 V, 50 Hz Suction nozzle: Ø80 mm with angle and parallel fence Weight: 55 kg Optional: - Angle stop - Cylindrical grinding device - mobile machine stand Price plus VAT, which will be shown separately on the invoice. Free and insured shipping throughout Germany! If y ...

General Description Thermal break rolling machine manufactured by Schüco International KG , model ISOMAT 5 . Designed for rolling polyamide insulating strips into aluminium profiles to produce thermally broken window, door and curtain wall sections. Suitable for aluminium profile fabrication and façade production. Technical Details Manufacturer: Schüco International KG Model: ISOMAT 5 Machine type: Thermal break rolling machine Year: 1998 Article No.: 299563 Serial number: 792-125 Power supply: 400 V, 50 Hz Motor power: 1.1 kW Rated current: 3.0 A Multiple precision rolling stations Adjustable guide rollers Profile support/feed table Emergency stop Weight: 660 kg Condition Good used industrial condition. The machine appears complete with roller assemblies, guide rollers, feed table and safety guards installed. Original Schüco paint is present with normal cosmet ...

Dear customers, here we offer you a new high-precision disc grinding machine for sale. This is a Swiss precision machine. They are designed for the processing of wood, plastic, Metal etc. and are used by model makers, designers, schools (handicraft lessons), engineering schools as well as metal and plastics processing companies for a wide range of tasks used. Here are some technical data: Grinding wheel: Ø600 mm Table dimensions: 320 x 830 mm Grinding wheel inclination: +/- 30° Motor power: 1.5 kW Speed: 940 min-1 Clockwise and counterclockwise rotation with visual display Voltage: 3 x 400 V, 50 Hz Suction nozzle: Ø100 mm Oyrkh with angle stop with engine brake Weight: 240 kg Optional: - digital angle display - Machine light - Table extension: 170 mm Price plus VAT, which will be shown separately on the invoice. If you have any questions, please do not h ...

Dear customers, here we offer you a new high-precision disc grinding machine for sale. This is a Swiss precision machine. They are designed for the processing of wood, plastic, Metal etc. and are used by model makers, designers, schools (handicraft lessons), engineering schools as well as metal and plastics processing companies for a wide range of tasks used. Here are some technical data: Grinding wheel: Ø900 mm Table dimensions: 450 x 1,200 mm Table extension: 300 mm Grinding wheel inclination: +/- 30° Motor power: 4.0 kW Speed: 600 min-1 Clockwise and counterclockwise rotation with visual display Voltage: 3 x 400 V, 50 Hz Suction nozzle: Ø150 mm with angle stop with engine brake Weight: 460 kg Optional: - digital angle display - Machine light - Table extension: 170 mm Price plus VAT, which will be shown separately on the invoice. If you have any questi ...

First commissioning: 2016 Control: Heidenhain iTNC 530 incl. handwheel HR 520 X-axis: approx. 2,500 mm Y-axis: approx. 3,000 mm Z-axis: approx. 1,250 mm A-axis: ± 110° C-axis: ± 300° Clamping table Clamping surface: approx. 2,500 x 3,250 x 400 mm 2-axis milling head VH30 Spindle power: 60 kW Spindle speed: max. 22,000 min-1 Torque: 95 Nm Tool holder: HSK 63A Tool tensioning: hydraulic Coolant supply: outside and inside Blowing air: Outdoor Drives Linear axes Feed speed X-, Y-, Z-axis: up to 60 m/min Axle acceleration X-, Y-, Z-axis: up to 5 m/s2 Connection data Connected load: 190 kVa Fuse: 315 A Dimensions, weights Space requirement machine with peripherals: approx. 10,000 x 9,000 x 5,650 mm Total weight: approx. 55,000 kg Colour Housing, portal, control cabinet: RAL 7035 light grey Milling head and applications: RAL 6038 luminous green  ...

General Description Vertical glass washing and drying machine manufactured by Triulzi S.r.l. . Designed for automatic washing and drying of flat glass prior to insulating glass production, tempering, lamination and other architectural glass processing. Suitable for continuous industrial operation. Technical Details Manufacturer: Triulzi S.r.l. Machine type: Vertical glass washing and drying machine Maximum glass height: 3,000 mm Vertical washing and drying configuration Roller conveyor transport system High-efficiency air-knife drying system Industrial electrical control panel with operator interface Suitable for float, coated, laminated and Low-E glass Condition Good used industrial condition. The stainless-steel structure appears complete with straight panels, intact roller conveyor system and access doors. The machine remains installed in an industrial production envi ...

Register punch EUROTRON IND-XR 500, year of construction 2004, serial number S1-2004-1, with adjustable X-axis and Y-axis see result Photo of test, in good condition, immediately available If you are interested, we will also be happy to inform you about other machines in our company. You are welcome, by prior appointment, to visit the machine in our house.

Very robust and compact 1-fold eyelet machine, electric table unit in top condition. Designed for 5.5 mm eyelets. Stock goods, immediately available.

GeneralUniversal Milling Machine Stealth Design; Control: CELOS X with HEIDENHAIN TNC7 Working area 1Longitudinal550 mmCross450 mmVertical420 mmTechnical DataFeed rate longitudinal/transverse/vertical30000/30000/30000 mm/minRapid traverse longitudinal/transverse/vertical30/30/30 m/mininlineMASTER® spindlespeed range 20 - 15.000 min-1 SK40 suitable for BIG-PLUS® tools Drive power (100% DC) 14,5 kWDrive power (40% DC) 20,3 kWTorque (100% DC) 84 NmTorque (40% DC) 121 NmSpeed range 20 - 15000 rpmSpindle taper SK40 Tool holder DIN ISO 7388-1-A Clamping System DIN ISO 7388-3-A, AD Tool clamping for HSK-A63Tool clamping HSK-A63 according DIN 69893 (incl. adaptation working spindle and tool magazine) NC swivel rotary tableSwivel Rotary Table for simultaneous machining Clamping surface dia. 505 x 500mm / 19.9 x 19.6 in swivel range -35 to +110°, rotary axis 360° including direct measuring sys ...

Punching force 80 tons punching capacity Ø 25 x 23mm Diameter x thickness Ø 50 x 12mm Projection 310mm stroke length 100mm Stroke rate at 20mm 28 / minute Table size 700 x 500mm Working height 1050mm Motor power 5.6kW Model weight 1960kg Dimensions LxWxH 1280x865x1980mm

Housing/partition wall for Polar cutting machines or stackers; width 228cm; Height 180cm. Housing/dividing wall for cutting machines or lifters Polar; width 228cm; hight 180cm.

GeneralCNC Turning Centre with C axis and tool drive; Control: M730BM with MAPPS IV CharacteristicsMax machining diameter356 mmMax. Turning Length510 mmSwing- Ø, max.755 mmBar diameter max.65 mmSpeed max.-5000 rpmNumber of tool stations20 Rotary tool spindle speed10000 rpmMovements X / Z260/590 mmInput precision of C-axis on Mainspindle0,001 degreeRapid feed X / Z30/30 m/minDrive power main spindle15/15/11 kWDrive power tool spindle5,5/5,5/3,7 kWDimensions (L x W x H)2,82 x 2,09 x 2,15 mWeight approx.5000 KgCELOS - ERGOline TouchCELOS - ERGOline Touch to facilitate machine operation incl. 21.5 " ERGOline Touch ® control with multi touch screens Uniform management, documentation and visualization of order, process - and machine data Networkable with CAD / CAM User friendly and p (Spindle 1) Standard spindle 15 / 11 kW, 5,000min-1(Spindle 1) Standard Spindle 15/11 kW (20/15 HP), 5,0 ...

Catalog No. 6765 TECHNICAL DATA - max width of the workpiece 230mm - max height of the workpiece 160mm number of spindles 4: 1) horizontal bottom 230mm 5.5kW 2) vertical right 160mm 5.5kW 3) vertical left 160mm - electrically adjustable right/left from the control panel 5.5kW 4) horizontal top 230mm - electrically adjustable up/down from the control panel 7.5kW - all spindles adjustable up / down, right left - spindle diameter 40mm in advance: - introductory pulling rollers, toothed 6 pcs, including 2 double - pulling out rollers, rubber 2 pcs from down: - introductory toothed, metal, torsion roller in the bottom plate + - smooth metal pulling roller - pneumatically adjustable rollers - length of the introductory tabletop (with pneumatic feeder) 3390mm - the ability to work without switching on the pneumatic feeder, - adjustable top / bottom - central lubrication - ...

GeneralCNC Turning Centre with C and Y axis and tool drive; Control: Control M730UM with CELOS CharacteristicsMax machining diameter356 mmMax. Turning Length510 mmSwing- Ø, max.755 mmBar diameter max.65 mmSpeed max.-5000 rpmNumber of tool stations12 Rotary tool spindle speed10000 rpmMovements X / Z260/590 mmInput precision of C-axis on Mainspindle0,001 degreeRapid feed X / Z30/30 m/minDrive power main spindle15/15/11 kWDrive power tool spindle5,5/5,5/3,7 kWDimensions (L x W x H)2,82 x 2,09 x 2,15 mWeight approx.5000 KgCELOS - ERGOline TouchCELOS - ERGOline Touch to facilitate machine operation incl. 21.5 " ERGOline Touch ® control with multi touch screens Uniform management, documentation and visualization of order, process - and machine data Networkable with CAD / CAM User friendly and p (Spindle 1) Standard spindle 15 / 11 kW, 5,000min-1(Spindle 1) Standard Spindle 15/11 kW (20/ ...

Weibert ADM 320 Dressing thickness planer Planer width 320mm 3 knife shaft Motor 3kW 400V Dressing table 1500 x 320 mm chip removal 5mm Speed 5000 rpm Thickness table 700 x 316mm Passage height 230mm Feed 7m/min Weight 260kg WJ-ADM-320

see PDF attached

VERTICAL PACKING MASCHINE

This 4-axis DMG MORI CLX 550 V4 was manufactured in 2020. It features a turning length of 1,225 mm, X-axis travel of 307.5 mm, and Z-axis travel of 1,240 mm. The machine is equipped with live tools, a spray gun, a hand wheel, and a tool setter. If you are looking to get high-quality turning capabilities, consider the DMG MORI CLX 550 V4 horizontal turning machine we have for sale. Contact us for further details.

Reference Num.: 4480 Brand: Heidelberg Type: SM 52-6-P3+L Construction year: 2002 Impressions: 152 mio Available: 15.01.2027 Status: In production Location: Europa Printing units: 6 Equipment: - Lackiersystem - CP 2000 - Wendung 2:4 / 6:0 - Alcolor - Wascheinrichtung - IR Trockner

offer 22391 Specifications: - Cutting length up to 200 mm - Cutting thickness - steel with 400N/mm² strength 6 mm - Stainless steel with 600 N/mm² strength 4 mm - infinitely variable cutting angle adjustment 30 - 120 ° - pneumatically clamped - automatic cutting gap adjustment - Locking stops left + right each 300 mm - Table support surface 1000 x 800 mm - with T-slots and depth stops - Table height approx. 900 mm - Depth stops - Drive 400 V / 4 kW - E – Foot switch - Space requirement approx. W 1000 x H 1350 x D 1510 mm - Weight approx. 1800 kg

CNC centerless grinding machine Monzesi mod Monza 510 CNC 6 axes complete with piece loading and unloading system CNC Fanuc 160i-T Under power in our warehouse in Gussago BS. Mimu machine tools Italy

x-travel: 6300 mm y-travel: 1200 mm z-travel: 2000 mm Control: total power requirement: kW weight of the machine ca.: 57 t dimensions of the machine ca.: 7000x1300x5000 mm Brand: Anayak Type: HVM7000 CNC brand: Heidenhain Year of make: 1997 Table length: 7.040 mm Table width: 1.000 mm X: 6.300 mm Y: 1.200 mm Z: 2.000 mm max. 3000 Rpm Machine dimensions (lxwxh): 7000 x 1300 x 5000 mm Machine weight: 57.000 kg including 6 angleplates 2500 x 700 mm this machine is in perfekt working order and can be inspected under power The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Reference Num.: 4481 Brand: Polar Type: N 92 PLUS Construction year: 2020 Available: 15.01.2027 Status: In production Location: Europa Cutting Size: 920 mm Equipment: - Programm - Lichtschranke - Lufttisch - Seitentische - Polar Rüttler - Palettenheber / Stapelheber

A Belotti 5-axis CNC gantry milling machine is offered. Travels X/Y/Z: 12000mm/3000mm/2000mm, C-axis: +/-200°, A-axis: +/-115°, milling head: Cytec, spindle power: 20kW, torque: 48Nm in S1, max. spindle speed: 24000rpm, control: Siemens 840D. Documentation available. Inspection possible by arrangement.

• Machine length: 13,300 mm • Machine width: 3,300 mm • Web width: 600 mm • Operating voltage: 200 VAC, 50/60 Hz, 3-phase • Power rating: 62 kVA • Current: 179.1 A • Maximum output with stacking system: 180 cycles/min • Main operating side: left-hand side in the direction of travel Production Capabilities: • Three-side-sealed pouches • Stand-up pouches with elliptical bottom (Doypack) • Pouch width: 60–250 mm • Pouch length: min. 110 mm, max. 270 mm (two lanes), max. 540 mm (single lane) • Bottom gusset: 40–90 mm (extended, including edge trim) • Processable materials: PP/PE, PET/PE, PET/ALU/PE • Film thickness: 80–250 μm Equipment: • Parent-roll unwinder with web edge control • Unwinder with winding shafts for 76 mm and 152 mm cores • Maximum clamping width: 1,200 mm • Maximum roll diameter: 800 mm • Bottom-gusset s ...

CENTRO DI LAVORO KIA V25- ANNO 2005, CNC FANUC 0i-MB PALLET:2 UTENSILI SORAGE: 16 STAZIONI MANDRINO BT30 Giri/min: 10000 TABELLA:500X300X500 FULL DI MANUALI E ATTREZZATURE. MACCHINA MOLTO VELOCE e veloce da equipaggiare. COLLEGATA ALL'ALIMENTAZIONE IN PRODUZIONE.

Laser Prima Industrie CP 4000 3000x1500 4000W Anno 2006 Ore lavoro circa 30 mila No carico/scarico Piano doppio Revisionato Visibile in funzione

Used Dunkes DF 350 punching machine/printing press Auction-ID: A1-50936-134

This 3-axis Okuma GENOS L3000-e (Mx450) was manufactured in 2022. It features a powerful 22 kW main spindle motor with a maximum speed of 3,800 rpm. The machine includes a V12 radial turret for milling, a chip conveyor, and a touch setter for tool presetting. If you are looking to get high-quality turning capabilities, consider the Okuma GENOS L3000-e (Mx450) horizontal turning machine we have for sale. Contact us for further details.

ORT 3RP48 CN CNC / PLC thread rolling machine scaffolding sleeves threading, shelves studs threading electronic overhaul/retrofit Under power in our warehouse in Gussago BS. Test run possible Mimu Machine Tools

MAX DIAM 400, MAX MODUL 8

KORRADI UW 10 with Heidenhain equipment, details see pictures, immediately available

Horizontal turning machine manufactured in 2000. This GILDEMEISTER NEF 320 features a robust control system by HEIDENHAIN. If you are looking to get high-quality turning capabilities, consider the GILDEMEISTER NEF 320 machine we have for sale. Contact us for further details.

This 3-axis Proth PSGC-50120AHR surface grinding machine was manufactured in 2021. It features a table size of 500 x 1,200 mm and a maximum travel of 560 x 1,350 mm. The machine has a continuous table load capacity of 1,200 kg and includes a digital readout system retrofitted in 2022. If you are looking to get high-quality grinding capabilities, consider the Proth PSGC-50120AHR machine we have for sale. Contact us for further details.

Diosna spiral kneader SPV 160 AD with 2 extendable boilers For a maximum of 160 kg of dough per bowl Kneading tool made of stainless steel Including two stainless steel shells Timer with two clocks Two speeds Friction wheel drive Condition: obsolete; checked and cleaned

Universal milling machine Deckel FP1 Machine Operating voltage: 380/400 volts without feed in y direction, with angle table, work surface with 4 T-slots Condition see pictures Errors excepted!

This 3-axis TRUMPF Trumatic L3050 was manufactured in 2003. It features a powerful TRUMPF TLF 5000 CO2 laser with a capacity of 5 kW, making it suitable for various cutting applications. The machine has been connected to power and is fully operational, with a history of maintenance ensuring reliability. If you are looking to get high-quality laser cutting capabilities, consider the TRUMPF Trumatic L3050 machine we have for sale. Contact us for further details.

It is a used, reconditioned Fortuna bun press semi-automatic size 3 (30 pieces) for sale. The bun press is in top condition, fully functional and runs very quietly. A new knife rack was installed. The engine was re-mounted and a new main switch was installed. The machine was repainted. The weight range of the machine is 32gr. - 70gr. per piece of dough (30 pieces). If dough pieces are only pressed and cut, a higher weight range is possible. Incl. 3 x plates (further plates on request). Price on request.

Travel distances: 320 x 250 x 220 mm [ X x Y x Z ] workpiece size X: 780 mm workpiece size Y: 570 mm workpiece size Z: 200 mm workpiece weight: 350 kg with automatic wire threading U/V axis: 80 mm x 80 mm  Cutting in a water bath Conicity: +/- 15° at 120mm

Milling machine MACMOM M 100, year of construction 1970. Without table. At call.