machine for making used for sale

MOT expired, engine malfunction light fire code p0304, lighting, electric windows front and rear, electric seats, cruise control, electric door locking, gas tank, spare tube, front towing eyes, leather upholstery, automatic transmission, skylight, Auction-ID: A1-47418-12

Hesston Field queen rear dump forage harvester. Equipped with a 20 m3 bunker, which unloads at the rear. The bunker can tip, and is equipped with a floor chain. A 12 foot (3.66 M) direct cut header is mounted on the front of the shredder, The forage harvester is powered by a 275 hp Detroit Diesel. The roof of the bunker is loose Various documentation is included Auction-ID: A1-47391-284

Equipped with 4 cylinder Perkins engine technically good condition possibility for 3rd hydraulic function Auction-ID: A1-47391-278

Valentini APACHE 2T 2500 – Forestry Tiller • Manufacturer: Valentini • Model: APACHE 2T 2500 • Machine type: Forestry tiller • Three-point universal suspension Cat. 2 and 3 • PTO speed: 1,000 rpm • Single-speed gearbox • Reinforced rotor • Rotor diameter: 635 mm • Rotor with size 40 teeth • Teeth made of high-strength and wear-resistant steel Equipment: • Double side gearbox • Valentini-4G gears in oil bath • Transmission and idle side support protection rings • Bearing brackets with special seals • Labyrinth Camp Protection • Central cardan shaft with locking bolt • Tractor-side fork: 1 3/4\" Z20 • Bull bar • Support legs • CE marking Application: • For agriculture, forestry and contractors • For the cultivation and recultivation of forest areas • To prepare land for agricultural use • Suitable for preparing ...

Equipped with 6-Cil. \"Ford\" Diesel engine; PTO shaft 540 rpm; 2 double-acting hydraulic valves; lower drawbar; lifting device; front weight set 11 pieces approx. 40/45 kg; with valuation report from 2024; various documents such as maintenance invoices; Auction-ID: A1-47391-41

2x gas bottle. (PLEASE NOTE! this vehicle has a license plate registration, when you pick it up you must register it on the spot with a third party or export it, there are extra costs involved) Auction-ID: A1-47391-182

Electric windows and mirrors, multimedia system, air conditioning, 5-speed manual transmission, Auction-ID: A1-47418-207

Consists of: Cascade, Series: F-Series, Model: 65F-SSS-B655, Hydraulic Side Shifter, Mounting Class: FEM/ISO Class III (65F), Suitable for Forklifts in the 2.5–5 Ton Class, Nominal Load Capacity: 2,500 kg, Load Gravity: 500 mm, Own Weight: 76 kg, Fork Board Width: 655 mm, Maximum Hydraulic Pressure: 240 bar, Hydraulic Connection: 1 Double-Acting Hydraulic Function, Side Shift: Approx. 200 mm Total (Approx. ±100 mm), fully pre-assembled, can be mounted directly without welding, high visibility for better visibility while working, wear-resistant plain bearings for a long service life, even side shift to the left and right thanks to double-acting cylinder, suitable for conversion to a fork positioner (Fork Positioner) with a conversion kit, width: ± 655 mm, height: ± 600 mm, depth: ± 140 mm Auction-ID: A1-47391-303

MOT expired 2023-06-26, Electric windows, towbar Auction-ID: A1-47418-170

Ford Model A Tudor Sedan 1930 Fully restored – Very nice condition Very nice and authentic Ford Model A Tudor Sedan from 1930. This characterful classic has been fully restored and is still in a very well cared for condition. Always treated with care and stored indoors. Stored on the road in 2017. The car has the distinctive dark green bodywork with black fenders and original wire wheels. Data: • Year of construction: 1930 • Version: Tudor Sedan • Engine: 4-cylinder petrol • Manual transmission • Complete restoration in 1998 • Annual maintenance carried out until 2017 • Very neat paint and chrome parts • Always stored indoors • Dutch registration (PLEASE NOTE! this vehicle has a license plate registration, when you pick it up you must register it on the spot with a third party or export it, there are extra costs involved) Auction-ID: A1-47418-8

2x Rolls Forbo Siegling Conveyor Belt E 12/2 U0/U10 GSTR green 1x Roll 16062 x 1800 mm 1x Roll 21057 x 1800 mm Applications: Metalworking & Automotive Product data sheet see pictures. Auction-ID: A1-50474-6

Professional Epson Stylus Pro 9900 large format inkjet printer, developed for high-quality photo, graphic and fine-art prints. Suitable for professional use such as posters, photography, art prints, proofs, presentation material and large format graphic applications. The Stylus Pro 9900 supports media up to 44 inches (1118 mm) wide and uses Epson's UltraChrome HDR ink system for a wide colour gamut and high-quality print. Specifications Brand / Model: Epson Stylus Pro 9900 Model Number: K162A Type: Professional Large Format Inkjet Printer Max Media Width: 44 inches / approx. 1118 mm Max. resolution: up to 2880 × 1440 dpi Ink system: Epson UltraChrome HDR Number of colors: 11 cartridges / 10-color print configuration Power supply: 100–240 V, 50–60 Hz Serial Number: KJF011224 Production date according to label: 21-11-2011 Auction-ID: A1-47446-80

Toyota 4FB15 electric forklift – 1,500 kg – 3,000 mm – 48 V – 1982 – including charger Specifications: Brand: Toyota Type: 4FB15 Year of construction: 1982 Serial Number: 4FB15-11218 Drive: electric, 48 V Lifting capacity: 1,500 kg at 500 mm load centre Lifting capacity: 1,350 kg at 600 mm load centre Lifting capacity: 1,200 kg at 700 mm load centre Maximum lifting height: approx. 3,000 mm Mast: 2-piece Fork length: approx. 1,200 mm Number of wheels: 4 Own weight excluding battery: 2,350 kg Minimum battery weight: 590 kg Operating weight: approx. 2,940 kg or more Dimensions: approx. 3,200 × 1,100 × 2,100 mm including forks Features: 48 V traction battery Pneumatic tyres Lighting Open driver's seat Separate battery charger Particularities: Visible signs of use, paint and rust commensurate with age and use. Condition and remaining capacity o ...

Hours reading not readable. working well. incl working charger. Auction-ID: A1-47391-115

Consisting of 3 crate pallets, 3 metal Kruizinga storage bins with lifting eyes and 2 grab storage bins with contents Consisting of cast-in transport anchors, mounting feet, bolts and the like Auction-ID: A1-50251-288

Electric windows and mirrors, cruise control, 6-speed manual gearbox, air conditioning, length of cargo floor 4600mm, width of cargo floor 2050mm, including road plates, tow bar Auction-ID: A1-47418-160

Engine is partly overhauled good working condition Auction-ID: A1-47391-241

YTEF-10 forklift 1000kg electric new Simple forklift with two-part mast and without side shift. 60V battery that is charged at 230VAC.  • Year of construction: 2026 • Own weight: 1600kg • Lifting capacity: 1000kg • Maximum lifting height: 300cm • Maximum working time: 6 hours Auction-ID: A1-47391-112

Electric windows and mirrors, cruise control, steering wheel controls, multimedia system, 6-speed manual, air conditioning, double cabin, tow bar Auction-ID: A1-47418-159

48V battery pack, Forks 1000mm, spoon board 1075mm, plywood mast, side shift, spoon spreader 550/1840mm, blue spot front, blue spot rear, towing eye with pin 25mm, max lifting height 4625mm, max lifting capacity 2000kg Auction-ID: A1-47391-103

Engine does not run well, Electric windows + mirrors, automatic lighting, cruise control, steering wheel control, Multimedia system with Bluetooth and navigation, climate control with zone control, adjustable rear seats, 7 seats, panoramic roof, front fog lights, front parking sensors + rear Auction-ID: A1-47418-211

Please note; no brakes, mast drops, closed box 2100mm, duplex mast, 3rd function, work light, towing eye with pin 30mm, loadrite weighing system, Auction-ID: A1-47391-101

WIFO P46 3-Point Pallet Fork – 1,300 kg – 1,000 mm Spoons Specifications: Brand: WIFO-Anema BV Type: P46 Serial Number: B142270-020 Version: 3-point pallet fork / pallet carrier Maximum capacity: 1,300 kg according to rating plate Own weight: 54 kg according to rating plate Number of pallet spoons: 2 fixed steel pallet spoons Length of spoons: approx. 1,000 mm Center-to-center distance spoons: approx. 590 mm Total height: approx. 710 mm 3-point coupling: category I Mounting: mechanical Construction: Fully welded steel Features: Locking pins CE marking No hydraulic connection required No electrical connection required Suitable for pallets, crates and similar loads Particularities: Year of construction unknown Auction-ID: A1-47391-289

Side shift not working equipped with 3 stage powershift Auction-ID: A1-47391-239

Hours are ascending, age approximately 1990. Auction-ID: A1-50090-14

-For machines 6 – 9 T -Working width 800mm -New Auction-ID: A1-49954-35

In the original case with accessories Auction-ID: A1-50529-652

Used tines for pallet fork Distance between coupling points: approx. 420 mm Tine length: approx. 120 cm Auction-ID: A1-50501-26

Used tines for pallet fork Distance between coupling points: approx. 520 mm Tine length: approx. 120 cm Auction-ID: A1-50501-29

2x 400 Volt; 2x 230 Volt; without pallet; Auction-ID: A1-44050-384

General Description Wide-format hot/cold roll laminator manufactured by FayonLami . Designed for laminating and mounting printed graphics, signs, posters and other flexible wide-format media. The machine features powered roller operation with adjustable temperature, speed and media handling controls. Technical Details Manufacturer: FayonLami Machine type: Wide-format hot/cold roll laminator Working width: Approx. 1,600 mm Hot and cold lamination modes Powered roller drive Digital temperature display and adjustment Variable speed control Adjustable roller pressure / gap Multiple media unwind and rewind shafts Suitable for liner-backed and linerless film configurations Foot pedal control Emergency stop Auction-ID: A7-50518-9

battery 48 volts, battery in good condition, incl charger 48 volts 100 amp Auction-ID: A1-40421-83

unused machine, diesel engine 37 KW Auction-ID: A1-40421-28

including forging tongs, block and hall block, saddles, Auction-ID: A1-50090-19

80 volt battery year of manufacture 2018, automatic filling system incl. charger Junheinrich 80 volt 100 amp, machine starts lifting and lowering, extra long forks 152cm Auction-ID: A1-40421-80

Clamp, 1925mm maximum width, 750mm minimum width, 1600mm forks. 4 hydraulic functions Auction-ID: A1-41951-3

Solid tires at the front, pneumatic tires at the rear. 4 valves. Auction-ID: A1-41951-2

For 6 – 9 ton crane New Auction-ID: A1-49954-41

80 volt battery from 2018, battery with good conditions. incl. industrial charger 110 amp 80 volt Auction-ID: A1-40421-82

Eckold KF653C. Metal forming, shrinking and stretching machine. Well used but in working order. Comes with foot pedal, 80mm shrinkers, 80mm stretchers, hard tool holders.

Innotech GmbH vertical bag forming, filling and sealing machine, type: 2500 Revo, serial number: 1.32.18.1338, year of construction: 2019, 230-400 V, 3 Ph, 50 Hz, 25 A, weight: 720 kg, diameter filling pipe: Ø 125 mm, film width: 470 mm, seal length: 280 mm, total dimensions: 1400 mm x 2300 mm x 2100 mm.

Innotech GmbH / Rovema vertical bag form-, fill- and seal machine, type: 2500 REVO, serial number: 1.32.17.1252, year of construction: 2017, 230-400 V, 3 Ph, 50 Hz, 25 A, film width: 510 mm, diameter pipe: 130 mm, vertical seal length: 370 mm, horizontal seal length: 280 mm, total dimensions: 2400 mm x 1450 mm x 1970 mm. Including extra filling pipe.

Equipment: 7804699 Brand: STILL Model: RX60-30L Hours: 7444 Year of Make: 2019 Mast: Telescopic mast Overall height: 2,325 mm Nominal stroke: 3,270 mm Free lift: Hydraulic Actuation: Mini Lever Battery: included Load capacity: 3,000 kg Condition: tilt cylinder knocked out, in the vehicle Hydraulic hoses damaged Seat cushion damaged Wheels front + rear non-round Battery door dents Battery terminals increased Battery trough oxidized Paint damage Auction-ID: A7-50531-263

Equipment: 7447337 Brand: STILL Model: RX60-30 Hours: 7271 Year of Make: 2017 Mast: Triplex Overall height: 2,475 mm Nominal stroke: 5,390 mm Free lift: 1,850 mm Hydraulic Actuation: Mini Lever Battery: With Load capacity: 3,000 kg Condition: Seat cushion damaged Interior trim damaged/missing Wheels damaged at the front Wheels at the rear unrounded and damaged Overhead guard dents Rear fairing dents Battery door damaged and dents Paint damage Operating hours according to counter 7271h Fork positioner AA: 1080 mm AI: 845 mm ZA: 310 mm ZI: 75 mm Auction-ID: A7-50531-137

Equipment: 7591686 Brand: STILL Model: RX60-25 Hours: 965 Year of Make: 2016 Mast: Triplex - Mast Overall height: 2,275 mm Nominal stroke: 4,890 mm Free lift: 1,500 mm Hydraulic Actuation: Mini Lever Battery: included Load capacity: 2,500 kg Condition: Hydraulic hoses damaged Rear fairing dents Battery door panel damaged FSD BSäule (right. Side) Kink Paint damage Auction-ID: A7-50531-258

Equipment: 7804657 Brand: STILL Model: RX60-25 Hours: 6687 Year of Make: 2020 Mast: Telescopic mast Overall height: 3,275 mm Nominal stroke: 5,170 mm Hydraulic Actuation: Multi-lever Battery: With Load capacity: 2,500 kg Condition: Tilt Cylinder Game Hydraulic hoses damaged door, Seat cushion damaged Damaged wheels at the front, out of round Rear wheels out of round Front axle noise Rusty frame Rear fairing dents Battery door rust spots Battery terminals collapsed Battery trough oxidized AHK rear Air conditioning Paint damage Fork positioner: AA: 1025 mm AI: 785 mm ZA: 320 mm ZI: 80 mm Auction-ID: A7-50531-34

Equipment: 7657666 Brand: STILL Model: RX20-20 Hours: 6085 Year of manufacture: 2018 Mast: Telescopic mast Overall height: 2,510 mm Nominal stroke: 3,850 mm Free lift: Hydraulic Actuation: Mini Lever Battery: without Load capacity: 2,000 kg Condition: without battery Wheels worn out at the front Frame dents Paint damage Auction-ID: A7-50531-300

Equipment: 7683507 Brand: STILL Model: RX20-16C Hours: 11827 Year of Make: 2021 Mast: Triplex - Mast Overall height: 3,210 mm Nominal stroke: 7,870 mm Free stroke: 2,635 mm Hydraulic Actuation: Joystick4+ Battery: without Load capacity: 1,600 kg Condition: without battery Tilt cylinder and mast bearing knocked out Hydraulic hoses damaged Forks crooked Front wheels damaged Rear fairing dents Paint damage Fork positioner: AA: 910 mm AI: 710 mm ZA: 260 mm ZI: 60 mm Auction-ID: A7-50531-308

Equipment: 7356703 Brand: STILL Model: RX60-45 Hours: 8220 Year of manufacture: 2018 Mast: Triplex Overall height: 2,600 mm Nominal stroke: 5,380 mm Free stroke: 1,688 mm Hydraulic Actuation: Joystick 4+ Battery: With Load capacity: 4,500 kg Condition: Fork carriage and tilt cylinder clearance Driver's door damaged Seat cushion damaged Interior trim damaged Wheels front and rear damaged Rear rims deformed Overhead guard dents Rear fairing dents Battery trough oxidized Paint damage Auction-ID: A7-50531-166

Equipment: 7386514 Brand: STILL Model: RX60-50/600 Hours: 10698 Year of Make: 2020 Mast: Telescopic mast Overall height: 3,400 mm Nominal stroke: 4,980 mm Hydraulic Actuation: Mini Lever Battery: With Load capacity: 4,990 kg Condition: Nameplate damaged Mast rollers and fork carriages knocked out Tilt cylinder and mast bearing clearance Forks crooked Door left damaged Wheels and rims damaged at the rear Overhead guard dents Rear fairing dents Battery door dents Battery terminals raised and oxidized Paint damage Fork positioner: AA: 1560 mm AI: 1260 mm ZA: 455 mm ZI: 155 mm Auction-ID: A7-50531-12