machine for making used for sale

Sachet duplex machine for liquid, gel etc. New machine up to 80 sachet per minute, NON leaks system, good sealed sachets. Economic price and made in SPAIN, All electronics components PANASONIC.

Type MB6023HK Working width 230 mm Working height 150 mm 6 spindles B, R,L, T, T,B Spindle diameters 40 mm Feeding speed 5-30 m/min Total power. 38.25kW Transport dimensions 3750x1600x1500mm Weight 3400 kg Price 21300 Eur (EXW Jonava, Lithuania

VEAGOO MACHINE VT-210X packaging machine was manufactured in 2020 in China. Characterised by its simple operation and reliability, the machine is designed for packing products i.e. disposable gloves or masks in bags made of various types of plastic. Highly efficient operation is achieved thanks to the used components and technology, saving time and materials. The VT-210X packaging line automatically determines the cutting length of the bags, then packs them with products with a maximum height of 85 mm, and at the end seals the pack very carefully. Depending on the size of the product being packed, the packaging machine is capable of producing up to a maximum of 150 bags per minute. The packaging machine is equipped with, among others, a PANASONIC PLC control and a YATAI temperature controller. The total weight of the machine is 650 kg. Technical specifications of the VEAGOO MACHINE ...

FILLETING MACHINE BAADER TPYE: 184 Technical description: Machine number: 10.3320 0184 Power supply: 380 V, 3 Ph, 50 Hz, 11.5 kW, 22.0 A Plastic conveyor belt width: 500 mm Band width: (2x) 160 mm Throughput: 24-40 pieces/min Water consumption: 25 l/min Weight: 2.500 kg Dimensions: 5400 x 1300 x 1450 mm This machine is laid out for filleting gutted and headed cod, haddock, saithe, hake, merluza and withing from 30 to 70 cm in total lenght (=0.3 to 2.5 kg, gutted including head). Proven BAADER filleting system providing for highest yield and reliability. The BAADER 184 is equipped with an integrated skinning device.

SALMON SLICER-PORTIONER, GEBA TYPE: GPS 200 ASW Technical description: Serial number: 6000 204 Year: 2002 Power supply: 380/440 V - 50/60 Hz - 3 Ph Band width: 390 mm (plastic) Weight: 475 Kg Dimensions: 2750 x 1000 x 1490 mm The GPS 200 ASW is the Top Slicer. When the GP series was introduced in 2000 it caused a revolution. The industrial look initiated a new design- era at GEBA. With the new GPS 200 ASW we matched the challenge, to keep on perfektioning this extraordinary line of products, not only optically but also technically. Now you increase your yield and profit with computer-controlled adjustment (ASW) of the slice thickness and the cutting angle.

SALMON SLICER, CP FOOD MODEL: SILK CUT SLICER TYPE: SC 180 Technical description: Serial number: :7527 Power supply: 230/240 V, 1 Ph, 50/60 Hz, 7.5 A, 1.0 kW Inlet: Plastic wire belt, belt widht: (2x) 180 mm Outlet: Plastic belt, belt widht: (2x) 200 mm Plastic rollers, rolers widht: (2x) 200 mm Dimensions: 1800 x 1000 x 1550 mm The machine is designed for slicing smoked salmon, trout and Greenland halibut without bones or skin, and with a temperature of about ?2 - +2? C. Its important that the fish has the correct temperature.

PACKING MACHINE FOR TUNAFISH AND ANOTHER FISHES, HERFRAGA MODEL SM-2C Technical features: Output: up to 50 cans/minute Recommended output: 20 to 50 cans/minute (according the can type) Format: diameter 150 mm Cans height: max. 120 mm

PACKING MACHINE FOR TUNAFISH AND ANOTHER FISHES, HERFRAGA MODEL SM-110 Technical features: Output: up to 100 cans/minute Recommended output: 40 to 80 cans/minute (according the can type) Formats: 1 unit with format diameter 73mm (ID 2015) 1 unit with format diameter 99mm Others formats: diameter 65mm, 1/2 oval, 1/4 oval Cans height: 25-62mm

FILLETING MACHINE BAADER TYPE: 208 Technical description: Output conveyor width (x2): 108 mm Power supply: 400V / 50 Hz Power: 2,6 kW Dimensions: 3750 x 1050 x 1250 mm This machine processes small gutted and headed hake, small haddock, saithe, cod and whiting. The cuts of the spring-loaded circular knives being controlled by the fish itself, the BAADER 208 produces single fillets with skin of high quality and with best yield. The BAADER 208 is easy to maintain and to operate. All functional areas are very well accessible. The machine is of robust construction and consists mainly of stainless materials so that it has a long service life also when used at sea.

BREADING MACHINE, KOPPENS TYPE: PR 600 Technical description: Machine number: PR600-972 Power supply: 380-440 V/50-60 Hz Power: 1.7 kW Weight: 300 Kg Stainless steel mesh belt Belt widht: 600 mm Dimensions: 2200 x 800 x 1900 mm

BREADING MACHINE, TITAN INTERNATIONAL, TYPE: TPM 630 Technical description: Serial number: 871038 Material: Stainless steel Mesh widht: 630 mm Hopper load capacity: 208 Lt Power supply: 380-440 V / 50-60 Hz Dimensions: 1850 x 1000 x 2000 mm

HEADING AND FILLETING MACHINE FOR SALMON AND MORE, CARNITECH TYPE: CT2620 + CT2630 Technical description: Heading machine CT2620 Power supply: (3x) 400 V, 50 Hz, 8 A Machine number: 08-0081 Year: 28/08/08 Dimensions: 4200 x 2100 x 1800 mm Filleting machine CT2630 Machine number: 08-0067 Year: 18/06/08 Power supply: (3x) 400 V, 50 HZ, 11 A Dimensions: 1800 x 850 x 2000 mm CT 2620 has been designed for head and tail cutting of salmon fish from 2 to 7 kg. The product is fed to the machine via a feeding chute, after which several operations are carried out on the fish, as the round attachment rotates one quarter of a revolution for each push on the button on the operation panel, see section 3.0 for further details. During initial operation, the occiput is sawed through with a round knife, where upon a guillotine knife tilts down to cut off the head, which then lands in the waste carrier  ...

FILLETING MACHINE BAADER 35 WITH NOBBING SYSTEM (SINGLE OR BUTTERFLY FILLET) FOR HERRING (20-40 CM), MACKEREL (24-40 CM), BLUE WHITING (22-40 CM) AND OTHER PELAGICS Technical description: Serail number: 10-1363-0035 Year: 1992 Throughput: 100-200 pieces/min Dimensiones: 3300 x 1250 x 1800 mm The BAADER 35 can process herring, from 20-40 cm (75-450 g), mackerel and silver smelt 24-40 cm (130-600 g), blue whiting 22-40 cm (75-350 g) as well as trout 25-38 cm (160-600 g) with all usual cuts. Amodified version for smaller herring from 17-32 cm (35-240 g) is BAADER 36. Separate drives of heading and filleting sections enable operation of the heading section as a separate machine with an optional nobbing attachment. Only on operator is required when the BAADER 35/36 is combined with the automatic feeder BAADER 482, 483, 484 or 488. A skinning machine BAADER 55 can be attached for the produc ...

FILLETING MACHINE, BAADER 36 Technical description: Power supply: 400 V/50Hz Dimensions: 3500 X 1000 X 1700 mm - 2300 X 1000 X 1100 mm Can be combined with Automatic feeder BAADER 488 The BAADER 35 can process herring, from 20-40 cm (75-450 g), mackerel and silver smelt 24-40 cm (130-600 g), blue whiting 22-40 cm (75-350 g) as well as trout 25-38 cm (160-600 g) with all usual cuts. Amodified version for smaller herring from 17-32 cm (35-240 g) is BAADER 36. Separate drives of heading and filleting sections enable operation of the heading section as a separate machine with an optional nobbing attachment. Only on operator is required when the BAADER 35/36 is combined with the automatic feeder BAADER 482, 483 or 484. A skinning machine BAADER 55 can be attached for the production of skinless herring fillets.

FILLETING MACHINE BAADER 35 (SINGLE OR BUTTERFLY FILLET) FOR HERRING (20-40 CM), MACKEREL (24-40 CM), BLUE WITHING (22-40 CM) AND OTHER PELAGICS Technical description: Machine number: 10-1363-0035 Throughput rate: 100-200 pieces/min Voltage/Power: 380 V, 3 Ph, 50 Hz, 11 A Dimensions: 3950 x 2600 x 1550 mm Weight: 835 Kg The BAADER 35 can process herring, from 20-40 cm (75-450 g), mackerel and silver smelt 24-40 cm (130-600 g), blue whiting 22-40 cm (75-350 g) as well as trout 25-38 cm (160-600 g) with all usual cuts. Amodified version for smaller herring from 17-32 cm (35-240 g) is BAADER 36. Separate drives of heading and filleting sections enable operation of the heading section as a separate machine with an optional nobbing attachment. Only on operator is required when the BAADER 35/36 is combined with the automatic feeder BAADER 482 or 484. A skinning machine BAADER 55 can be att ...

Type 1300-2S Working width 1300 mm Min.working length 400 mm Working thickness 2-80mm Grinding roller speed - Frequency control Feeding speed 5-20 m/min Total motor power 6.27 kW Transport dimensions 1700x2100x1400mm Weight 1200 kg Price 6100 Eur (EXW Jonava, Lithuania) Specifications Type 1300-2S Working width 1300 mm Min. Working length 400 mm Working thickness 5-140mm Grinding shaft speed – adjustable by frequency converter Feed speed 5-20 m/min The total power of the motors is 6.27 kW Dimensions for transportation 1700x2100x1400mm Weight 1200 kg Price 6100 Eur (EXW Jonava, Lithuania)

Type 1000-2S Working width 1000 mm Min.working length 400 mm Working thickness 2-80mm Grinding roller speed - Frequency control Feeding speed 5-20 m/min Total motor power 4,12 kW Transport dimensions 1700x1600x1400mm Weight 800 kg Price 4130 Eur (EXW Jonava, Lithuania) Specifications Type 1000-2S Working width 1000 mm Min. Working length 400 mm Working thickness 5-140mm Grinding shaft speed – adjustable by frequency converter Feed speed 5-20 m/min The total power of the engines is 4.12 kW Dimensions for transportation 1700x1600x1400mm Weight 800 kg Price 4130 Eur (EXW Jonava, Lithuania)

Forming, filling and sealing machine for yoghurt cups Original ERCA packaging machine (FFS - forming, filling, sealing) type RK3. This machine was reconditioned in 1998 by the company CMA. Nominal output: 21,000 pots per hour. It is equipped with a decoration unit. A cutting tool for standard 63x63 mm cups with two formats X4 and X6. Heating is by radiation. The automaton is a series 7 from Schneider. Out of production : 2017 The machine is complete and in good condition.

- Current format: capsule size 0 - 48 posts - Max capacity: 200,000 capsules / hour - Automatic checking weight - Year:? 2001 and full revamping in 2011 / 12 - spare parts available. - All documentation and pharmaceutical qualification files available

Zalkin TM125 single-headed capping machine The maximum output of this equipment is about 3000 bottles / hour. The bottles are introduced by accumulation. Direction left -> right Current format: Plastic Cap: diameter 60.5 mm x 4.5 mm Aluminium Cap: diameter 62 mm x 4.5 mm 16-cell wheel: pitch diameter 530 mm / cell diameter 56 mm - Caps dispenser (vibrating bowl + dispensing chute taken on the fly) type ADV N?6430 and 6428. - Rotating table: feeding bottles Entry conveyor belt: 2000 mm / width 110 mm Belt at the entrance on the machine: 1500 m Exit belt: 500 mm Capping head 104 Voltage: 380 Volts 50 hz electrical box on the output side. 1 control cell for checking the presence of the bottle with plastic cap 1 control cell for checking the presence of the aluminium bottle cap. 1 accumulation detection cell 1 jam detection cell

White onion peeling machine. The machine consists of three modules: a hopper from which the onion is transferred by a conveyor belt to the sorter. At the sorter there are two workers who sort the onions on both sides, put the usable ones in the holders and throw the damaged or spoiled onions onto the middle conveyor belt ordering them to evaporate. The onions suitable for further processing are conveyed in the incision holder by specially designed knives and then fall onto the rotating rollers. After turning the onion several times, a high-pressure air stream blows away the corresponding layers of the onion down to the white layer. The onion then falls on the sorting table, where it is picked up by an employee and placed in collective packages. Technical parameters: - manufacturer: GOLDEN MACHINE - type of machine: 2-row - Capacity: approx. 0.4 - 0.8 tons/h - year of production ...

Type CK-3000B Height of working table 800mm Working depth 80mm Working length 2500mm Motion controller Loran Max traveling speed 150m/min Max working speed 105m/min Control system TPR Spindle power 2x 2.2 kW Spindle speed 0-18000 rpm Transducer Jiale Air pressure 0.6-0.8 Mpa Motors power 750+750+400W Transport dimensions 4200x1700x1400mm Weight 900KG Price 6499 Eur (EXW Jonava, Lithuania)

The laser cutting machine KMT-2002 is manufactured on the basis of many years of successful experience in the production and operation of thermal cutting machines using the most effective technical solutions from European manufacturers.A distinctive feature of the machine is a rigid massive welded bed made of sheet, which is annealed to relieve stresses, which ensures long-term accuracy. The mechanical processing of the bed is carried out from one installation on a high-precision machining center. The design and construction of the bed ensures the absence of vibrations at maximum processing conditions (a common phenomenon on the machines of most manufacturers of the economy segment).

Machine description - screw diameter: 40 mm - screw L / D: 22: 1 - injection weight (HDPE): 190 g - maximum speed of the screw: 10-225 rpm. - heating power: 8.3 kW - injection clamping force: 292 kN - blow clamping force: 46.7 kN - maximum plate size (L x W): 400 × 270 mm - minimum mold thickness (H): 180 mm - mold heating capacity: 3 kW - opening: 220 mm - drying cycle: 3.5 sec. - engine power: 15 kW - hydraulic pressure: 15 MPa - suitable bottle range: 3-800 ml - maximum bottle height: ≤190 mm - maximum bottle diameter: ≤100 mm - minimum air pressure: 1MPa - compressed air discharge rate: ≥0.7 M3 / mm - water flow: 3 M3 / h - total rated power with mold heating: 26.3 kW Year of production 2015 Dimensions 326x120x220 [cm] Weight 4000 [kg]

production extrusion line for the production of binder for baling from PP KIT TO THE FINISHED PRODUCT (AS SHOWED IN THE PHOTO) The line is from 2018 and it works flawlessly Are we looking for a strategic partner to sell an item Sale of the building 1000 m / 2 - price negotiable I am at your disposal for more information

LS Machinery ID1300HM Injection moulding machine LS Machinery ID1300HM

Three-point box gluer equipped with three plasma torches for gluing even surface-treated boxes, eg laminate. It is possible to glue boxes made of various materials. From 300g / m offset papers to e-wool or 3VVL cardboards.

2021 MODEL THREE STATION INPAK MACHINE WE WANT TO SELL MACHINE BECAUSE WE NEED BIGGER DIMENION MACHINE , OUR MACHINE IS IN PRODUCTION AND CAN BE SEEN IN PRODUCTION. ITS ONLY 3 YEARS MACHINE LIKE NEW ONE

workpiece diameter: mm workpiece length: mm clamping length: mm

FILLETING MACHINE FOR SARDINE, HERRING, BLUE WHITING, BAADER TYPE: 134 Technical description: Power supply: 380 V, 50 Hz, 12,0 A, 2 kW, 3 Ph Dimensions: 3000 x 2100 x 1200 mm Weight: 450 Kg Can be combined with Automatic feeder for sardine and herring, Baader type: 478 This machine is especially designed for the filleting of small herring and pilchard with an overall lentgh of 15-25 cm (25-125 g), the convenient infeeding procedure and the steplessly adjustable operating speed permit high throughput. Excelent yield is guaranteed by a meat-saving selfadjusting headcut, adjustable tailcut and reliable passage through the filleting tools leading to smoothly cut block-fillets, single fillets without dorsal fins as well as belly cut herring with or without tail fins. Combined with the automatic feeder BAADER 478, the machine becomes an automatic filleting unit operated by only one person fo ...

Machines for the production of gloves I will sell a complete technological line for the production of foil gloves, 2x sealing line, 2x entertainment, 2x press for perforating the hole and a tape packing machine.

Blister format: 70x110x13mm, output: 10-50/min, the machine was never used.

Radial Roll Packaging System. Max. roll width: 4,820mm, throughput: approx. 30 rolls/h. Machine dimensions: 10.5 x 7.5m. Connected load: 3x63A. The machine is in working order and can be inspected on site during operation.

Fruit diameter: 100-250mm, skin thickness: 3-10mm, connected load: 1.5kW, width: 800mm, height: 2200mm, weight: 650kg.

Staples closing machine for closing internal and external staples on tubes RAS 25.15 Working length 1520 mm Chuck diameter 90 mm Staple width 10 and 13 mm Speed 16 m/min Max. sheet thickness 0.88 mm based on 400 N/mm² strength Chuck and closing rollers for inner and outer staples (10 and 13 mm wide) - Pedal switch for hydraulic clamping of upper clamping roller - Automatic opening of the upper closing roller, as soon as the tube touches a limit switch. Drive disengages automatically. - Doubling the useful length by turning the tube over.

Type: Turbobend plus 62.25 Year: 2018 Capacity: - Max. length: 2500 mm - Max. thickness: 2.5 mm (steel) Total motor power: 3 Kw Split tooling: standard + crowbar h : 110 mm

Machine FCS AE-400 Technical data Screw diameter Ø66mm; Injection pressure 1964 Kgf/cm²; Maximum shot volume 1026cm³; Max shot weight 937 gr; Injection rate 1368cm³/sec; Plasticizing rate 240kg/hr; Injection speed 400mm/sec; Screw rotation speed 250rpm; Mould clamping force 4000KN; Ejector stroke 140mm; Mould thickness 200~ 800mm; Suggestion minimum mold dim. (HxV) 450x450mm; Distance between tie bars 710x710mm; Mold platen 1040x1040; Pump driving motor 55,95KW; Heater capacity 33,2KW; machine dimensions (LxWxH) 8500x1950x2350mm; Oil tank capacity 1002Liter; Machine weight -25ton; Machine made 2008y; Produce: FU CHUN SHIN MACHINERY MANUFACTURE CO., LTD, Taiwan.

Nanjing Juli Chemical Machinery Co., Ltd. SHJ-75B PET twin screw granulator Extrusion - Twin screw extruder Twin screw extruder production line 75B machine twin Water ring Roots three- stage vacuum unit 500 vibrating screen First-class air delivery system with storage bin 300-500kg / hour, the specific output depends on the raw material melt flow rate, specific gravity, formulation and production process the screw diameter： Ф71mm； Main motor power: 132kw (Siemens bader ac motor) Main engine screw speed: 326rpm Heating power of main engine: 76kw Total installed power: 230 ~ 245kw The actual consumption is 150 ~ 160kw

Complete Working Melt Blown Plant Consisting of: 1 Mm 65 Extruder With 6 Heating Zones 1 Extruder Head 1 Vacuum charger 1 carpet and carpet turner 1 Reel With Meter Counter And Material Cutting 1 Electrostatic Load Control Unit And 2 Electrostatic Bars 1 Air Compressor 22kw + Soundproofing Cage 3 Dies Holes 0,20 Miss 600 Mm 1 Pyrolysis Oven X Die Cleaning 1 Ultrasonic Tank For Die Cleaning 1 Aspirator Behind The Mat For Melt Blown Formation 1 Complete System With Suction Hood And Pipes

ENDLESS DOFFERER For the automatic dosing of powdered products to the packaging machine with high precision. CHARACTERISTICS: Made of stainless steel. Height adjustable. Dosing speed commanded by servo motor. Stirrers independently driven by geared motor 50 dm³ hopper with easy opening for cleaning. sanitary filter Hopper level to regulate automatic feeding. Complete set of auger in stainless steel.

Isobar monobloc bottling machine with 16 washing heads, 16 filling heads and 6 capping heads Belt conveyor Automatic labelling machine Rotary accumulation table at the beginning of the line and accumulation table at the end of the line Compressor and vacuum pump Machine not used much due to change of company orientation

Triblock isobaric filler mod. 12-12-5 consisting of 12 rinsing tongs, 12 filling straws, 5 capping heads with 26 crowns. The fully automated machine can also be put in line complete with: bottle drive motor at the entrance, Samung touch screen plc panel for managing the machine functionality in manual / automatic mode, format change from 100 ml to 1000 ml glass n ° 1 spare Siemens inverter, set of original spare gaskets. Year of construction December 2017 Speed up to 1,500 bottles / h beer / sparkling water / still water / wine. The machine will be decommissioned from the line in mid-April.

Henan Daheng Machinery company model DHZH-130 Cartoning machine purchased in 2022 with commissioning done. Initially it was purchased to place a product inside 70mm (width) x 130mm (height) x 240mm (length) boxes, although it can be adjusted for other measurements. Box forming machine to introduce any type of product into 70x130x240 boxes automatically, brand new. The product is placed on the conveyor belt and the mechanized cardboard (boxes) at the other end. With the automatic counting function on the conveyor belt, the number of product units needed to enter a box is counted. This option is now with a conveyor belt and another input could be attached if necessary depending on the product. Once there are the desired units (1 to 20) the tape moves and is inserted into part 2 of the machine. While this action is taking place, the machine has already formed the boxes (formed) and when  ...

Machines that roast coffee from 1kg to 500kg at a time are produced. Capaccity of EKO 1K is 1,5 kg per batch.EKO 1K Coffee roasting machine of heating is electric.The coffee roasting machine is made by welding St 37 welded material. Our coffee roasting machines • Control sample spoon and sample viewing glass • Independent of cyclone dust collectors • Roasting and cooling at the same time • High capacity cooling system • It consists of a temperature control system.

Machines that roast coffee from 1kg to 500kg at a time are produced. Capaccity of EKO 5K is 5 kg per batch.The coffee roasting machine is made by welding St 37 welded material. Our coffee roasting machines • Control sample spoon and sample viewing glass • Independent of cyclone dust collectors • Roasting and cooling at the same time • High capacity cooling system • It consists of a temperature control system. As fuel Gas (compressed ore natural gas) and DIESEL can be used. Also electric can be ordered for heating .

20-75- CNC with tool changer WOODLAND MACHINERY (new) Type SX1325A-12 Useful working area axis X-Y-Z 2850-2100-150 mm Shaft, air cooled, 9.0kw 24000 rpm. Servo motor Control system LNC Drive gear High precision automatic positioning cylinder Work table vacuum plate Vacuum pump 7.5 kw Maximum speed 60 m/min Maximum working speed 15-20m/min Flexible towing cable (with screen) Air components BLCH Voltage 380V/50HZ Transport dimensions 3200x2100x1800mm Weight 3100 kg The price is 24500 Eur

Mobile vacuum machine, seal length: 460 mm, chamber dimensions: 460 mm x 520 mm, total dimensions: 520 mm x 920 mm x 1000 mm.

Mobile vacuum machine, seal length: 460 mm, chamber dimensions: 460 mm x 520 mm, total dimensions: 520 mm x 920 mm x 1000 mm.

Mobile s/s box closing machine, s/s rollers, roller width: 690 mm, total dimensions: 1440 mm x 850 mm x 1650 mm.

Description: Column drilling machine with: automatic feed Left/right rotation 2 stage motor Drilling capacity in steel 28 mm Projection 320 mm Drilling stroke 150 mm Table 500 x 320 mm Spindle holder MK 3 weight approx.: 280 kg, Approx. Onsite Dimension. (l x w x h): 1,200 x 800 x 1,900 mm