machine for fiber used for sale

Charger with battery plug and wall plug Loading onto trucks no problem Auction-ID: A1-50765-3636

Foreign buyers get the 19% VAT back immediately after the machine is exported from Troostwijk Youtube function and status video: https://youtu.be/K35-GDAbbRY - Former Linde full-service device - Service valid until 04/2027 - UVV valid until 04/2027 - Battery: 10/2019 80V 4PzS 500Ah, voltage measured at rest with 83.0 V - Facelift model with tilt angle display (practical for sensitive goods) - Triplex mast with full free lift - 3rd valve, sideshift - 4. Additional valve free for fork adjuster - Semi-cab with windshield wipers - Side fall-out protection (can be easily dismantled) - LED front work light - LED work light at the rear - Comfort seat Auction-ID: A1-50765-150

Youtube function and status video: https://youtu.be/uAg5eAf_ozQ - Former Linde full-service device - Service valid until 10/2027 - UVV valid until 10/2027 - Battery: Year of construction 05/05/2014 80 V 775 Ah, voltage measured at rest with 84.95V - Clear-view mast without central hydraulic cylinder - 3rd valve, sideshift - Semi-cab with windscreen with windscreen wiper - LED front work light - Comfort seat Auction-ID: A1-50765-75

Charger with battery plug and wall plug Loading onto trucks no problem Auction-ID: A1-50765-3729

Foreign buyers get the 19% VAT back immediately after the machine is exported from Troostwijk Youtube function and status video: https://youtu.be/-K665xBd38A - Former Linde full-service device - Service valid until 04/2027 - UVV valid until 04/2027 - Battery: 21/05/2019 48V 775 Ah, voltage measured at rest at 49.9 V - Triplex mast with full free lift - 3rd valve, sideshift - Roof pane - Side fall-out protection (can be easily dismantled) - LED front work light - LED work light at the rear - Warning light orange - Comfort seat Auction-ID: A1-50765-237

Charger 48V 130Ah with REMA battery plug and 16A wall plug Loading onto trucks no problem Auction-ID: A1-50765-3608

For lithium batteries from 82-410Ah REMA Battery Connector 220V plug Auction-ID: A1-50765-3592

Foreign buyers get the 19% VAT back immediately after the machine is exported from Troostwijk Youtube function and status video: https://youtu.be/z1OkI9O7-9I - Former Linde full-service device - Next service due in 410 operating hours - UVV valid until 06/2027 - Facelift model with tilt angle display (practical for sensitive goods) - Duplex mast with full free lift - 3rd valve, sideshift - 4. Additional valve free for fork adjuster - Integrated scale - Full cabin with heater and windshield wipers - LED front work light - LED work light at the rear - Safety light at the rear - Safety light at the front - Safety light on the side - Rear camera - Comfort seat with lumbar support and seat heating - LPG gas tank, convertible to gas exchange bottle on request Auction-ID: A1-50765-99

new and unused charger in orig. for batteries with 600-900Ah possible with 400V 16A and Rema 320A plug Built in 2025 and 2026, always unused Delivery by freight forwarder possible on request. Auction-ID: A1-50765-8020

Battery from former Linde Service 830x630x630mm Voltage at rest measured at 51.76 V Loading onto trucks with forklift trucks. Delivery by freight forwarder possible on request. Auction-ID: A1-50765-1160

REMA Battery Connector 220V plug Delivery by freight forwarder possible on request. Auction-ID: A1-50765-3441

For Linde Lithium Batteries REMA Battery Connector 400V plug Auction-ID: A1-50765-3674

Charger with battery plug and wall plug Loading onto trucks no problem Auction-ID: A1-50765-3655

new and unused for batteries with 600-900Ah possible with 400V 16A and Rema 160A plug Built in 2025 and 2026, always new and unused Delivery by freight forwarder possible on request. Auction-ID: A1-50765-4821

Charger with battery plug and wall plug Loading onto trucks no problem Auction-ID: A1-50765-3769

Charger with battery plug and wall plug Loading onto trucks no problem Auction-ID: A1-50765-3727

Charger with battery plug and wall plug Loading onto trucks no problem Auction-ID: A1-50765-3759

new and unused for batteries with 600-900Ah possible with 400V 16A and Rema 160A plug Built in 2025 and 2026, always new and unused Delivery by freight forwarder possible on request. Auction-ID: A1-50765-4820

Foreign buyers get the 19% VAT back immediately after the machine is exported from Troostwijk Youtube function and status video: https://youtu.be/r6jCU0nOET0 - Former Linde full-service device - Service valid until 04/2027 - UVV valid until 04/2027 - Battery: 26/2023 48V 625Ah, voltage measured at 50.0V at rest - Facelift model with tilt angle display (practical for sensitive goods) - Duplex mast with full free lift - 3rd valve, sideshift - Semi-cab with windshield wipers - Side fall-out protection (can be easily dismantled) - white non-marking tires - LED front work light - LED work light at the rear - Warning light orange - Safety light at the rear - Comfort seat with lumbar support and seat heating Auction-ID: A1-50765-110

Foreign buyers get the 19% VAT back immediately after the machine is exported from Troostwijk Youtube function and status video: https://youtu.be/EGcwKX9c1gc - Former Linde full-service device - Next service due in 615 operating hours - UVV valid until 06/2027 - Facelift model with tilt angle display (practical for sensitive goods) - Duplex mast with full free lift - 3rd valve, sideshift - 4. Additional valve free for fork adjuster - Integrated scale - Full cabin with heater and windshield wipers - LED front work light - LED work light at the rear - Safety light at the rear - Safety light at the front - Safety light on the side - Rear camera - Comfort seat with lumbar support and seat heating - LPG gas tank, convertible to gas exchange bottle on request Auction-ID: A1-50765-58

Foreign buyers get the 19% VAT back immediately after the machine is exported from Troostwijk Youtube function and status video: https://youtu.be/sMyLTTNgSwY - Former Linde full-service device - Clear-view mast without central hydraulic cylinder - 3rd valve, sideshift - Windshield with windshield wiper - Roof pane - LED front work light - LED work light at the rear - Comfort seat Auction-ID: A1-50765-82

Foreign buyers get the 19% VAT back immediately after the machine is exported from Troostwijk Youtube function and status video: https://youtu.be/K0tt0OWS4hw - Former Linde full-service device - Service valid until 05/2027 - UVV valid until 05/2027 - Battery: 0V 5PzS 625Ah, voltage measured at 82.6V in idle mode - Facelift model with tilt angle display (practical for sensitive goods) - Duplex mast with full free lift - 3rd valve, sideshift - Load protection grille (can be easily dismantled) - Full cabin with heater and windshield wipers - LED front work light - LED work light at the rear - Comfort seat with lumbar support and seat heating Auction-ID: A1-50765-116

new and unused charger in orig. for batteries with 500-700Ah possible with 400V 16A and Rema 160A plug Built in 2025 and 2026, always unused Delivery by freight forwarder possible on request. Auction-ID: A1-50765-8010

Charger with battery plug and wall plug Loading onto trucks no problem Auction-ID: A1-50765-3724

Foreign buyers get the 19% VAT back immediately after the machine is exported from Troostwijk Youtube function and status video: https://youtu.be/WjPy7b2WMAQ - Service valid until 10/2027 - UVV valid until 10/2027 - Battery: Year of construction 09/2023 48 V 500Ah , voltage measured at rest with 49.66V - Triplex mast with full free lift - 3rd valve, sideshift + forks new 10/2026 - Load protection grille (can be easily dismantled) - Semi-cab with windscreen with windscreen wiper - Side fall-out protection (very easy to dismantle) - LED front work light - LED work light at the rear - StVZO lighting with turn signals for road approval - Comfort seat Auction-ID: A1-50765-214

Charger with battery plug and wall plug Loading onto trucks no problem Auction-ID: A1-50765-3632

REMA 160A Battery Plug 16A plug Delivery by freight forwarder possible on request. Auction-ID: A1-50765-3382

new and unused charger in orig. for batteries with 600-900Ah possible with 400V 16A and Rema 320A plug Built in 2025 and 2026, always unused Delivery by freight forwarder possible on request. Auction-ID: A1-50765-8021

new and unused charger built in 2026 in orig. for batteries with 800-1,000Ah possible with 400V 16A and Rema 320A plug Delivery by freight forwarder possible on request. Auction-ID: A1-50765-8040

new and unused charger in orig. for batteries with 500-700Ah possible with 400V 16A and Rema 160A plug Built in 2025 and 2026, always unused Delivery by freight forwarder possible on request. Auction-ID: A1-50765-8011

Charger with battery plug and wall plug Loading onto trucks no problem Auction-ID: A1-50765-3766

Charger with battery plug and wall plug Loading onto trucks no problem Auction-ID: A1-50765-3721

Foreign buyers get the 19% VAT back immediately after the machine is exported from Troostwijk Youtube function and status video: https://youtu.be/yK0LM3loVxU - Former Linde full-service device - Next service due in 441 operating hours - UVV valid until 06/2027 - Facelift model with tilt angle display (practical for sensitive goods) - Duplex mast with full free lift - 3rd valve, sideshift - 4. Additional valve free for fork adjuster - Integrated scale - Full cabin with heater and windshield wipers - LED front work light - LED work light at the rear - Safety light at the rear - Safety light at the front - Safety light on the side - Rear camera - Comfort seat with lumbar support and seat heating - LPG gas tank, convertible to gas exchange bottle on request Auction-ID: A1-50765-114

Toyota petrol counterbalance forklift, robust machine of traditional design. This Toyota is equipped with a duplex chain mast, two forks and a hydraulic lifting system controlled from the driver's seat. Its compact 4-wheel configuration ensures good manoeuvrability for handling work. It also has a superior protective structure, a driver's seat, several hydraulic control levers and a dashboard including fuel and engine temperature indications. The mechanical speedometer visible on the dashboard shows approximately 7,350 hours, a value communicated subject to the readability and correct operation of the meter. Important regarding its mechanical condition: the trolley does not start systematically. A problem with the carburettor is probably to be expected. As no in-depth mechanical diagnosis has been carried out, the exact origin of this starting difficulty cannot be guaranteed. An ov ...

5-color R23847/15 PROPHETEER flexographic printing machine 18" Model: 1800 Built: 1998 available: immediately 5- Colors for labels and other products e.g. for cups / cups 18 Corona Car register Stacker Video Scanner Flat-in diameter: 1016 mm Available: immediately

R25532/08W Cosmos Vega Folding Carton Gluing Machine Model: 145 Built: 2003 refurbished 2010 for corrugated board Available: immediately

Radial drilling machine, used radial drilling m/c, used Type: BR 56 x 1600 Manufacturer/ make: WMW Year built/ year of make: 1965 Extension/ length of arm: 300...1600 mm Ma. Drilling radius / max. drill. Radius: 1800 mm Drilling capacity at boring: 56 mm ( St 60 ) Drilling capacity at boring: 80 mm ( GGL 20 ) Thread cutting/ thread cutting: max. 65 mm ( St 36 ) 76 mm ( GGL 20 ) Drilling depth/ drilling depth: 400 mm Tool holder / taper in spindle: MK 5 Removal spindle head to base plate/ distance Spindle head to base: max. 1600 mm Base plate/ base: 1700 x 1000 mm Speed range/ range of speeds: 14..1800 rpm Feed: 0.0315 .. 1.6 mm/U// mm per round Connection value: 7.13kW Weight: about 4.5 t

Rolling milling machine Koepfer 153 A/CNC Manufacturer Jos. Koepfer & Söhne GmbH Type 153 A/CNC Built in 1988 Machine No. 153199 Technical data Largest Module 2 Distance workpiece tool axis max. 4- 87 mm max. workpiece diameter - without magazine 142 mm - with magazine 80 (100) mm max. milling length 150 mm max. length workpiece - without magazine 300 mm - with magazine 220 mm min. number of teeth 3 min. screw gait number 1 Main spindle through- 33 mm Hole Mounting hole for 50 mm Jig max. cutter diameter 70 mm max. cutter width - Universal milling head 63 mm - Shifting milling head 71 mm max. axial cutter shift - Universal milling head 40 mm - Shifting milling head 44 mm 35 Longitudinal feeds 0.1 -5.0 mm /WU 10 cutter speeds 210-1680 /min Control (2 axes) CNC Drive power 2.2 kW Weight approx. 2400 kg Available immediately Location  ...

6-Colors R25476/17 ALLIED GEAR Labels Flexographic Printing Machine Model: Flexomaster Built: 1995 Availability: instantly 6 colors 6 Anilox rollers Paper cutters Lamination Transporter Power unit UV dryer Video body plate (JM Heaford) Still in operation: Yes Available: by arrangement

R26107/09 FISCHER & KRECKE Two-sewn flat bag machine Model: Perfect Built: 60s available: immediately Bag width: 80 - 200 mm Bag length: 160 - 480 mm 4-colour printing unit Available: immediately

CAP.: 10 000 BTLS/H OF 1.5 L,

4-color R23240/17 SHIKI label press Model: PC 45 M Built: 1992 Web width: 280 mm Availability: instantly 3 - coloured or 4 - coloured (optional) Printing width: 270 mm, min. 50 mm max. feed: 7, approx. 180 mm Accessories: Rolling unit for rollers up to 100 cm in diameter Winding unit for small rolls pneumatic remaline hole on both sides Speed: 7000 cycles/h max. Products: Hole edge adhesive labels, adhesive labels, hole edge cardboard labels, tickets with and without printing - can punch, print, embosse, number, perforate, punch Available: immediately

R25591/08V KECK Folding Carton Adhesive Machine Model: SF 80 Built: 1990 Availability: instantly Unused: 800 mm Fasson glue work from the cliché Longitudinal cross-gluing, selective - Striped glue for 1 x longitudinal bonding, cliché glue for cross-gluing Still in operation: Yes Available: immediately

refurp-up in 2007 Spare parts Still in operation: Yes Available: immediately

BOTTLES & JARS!

Machinery and equipment for the production of cement, All prices are from Station World and the dismantling and all follow-up costs are to be made by the buyer. VAT is not included in the prices. The contractual agreements for the individual offers must be agreed separately and only apply after the contract has been legally signed. Mistake reserved. All technical details; Measurements, etc., are approximate information and are non-binding for the provider. The technical data are manufacturer or operator information and therefore non-binding for us. Used material is sold to the exclusion of any warranty. We do not accept any liability for used material. Warranty exchange and return are excluded. Customer protection is agreed between the parties. The entire process of dismantling and loading as well as transport is carried out at the buyer's own expense and at the buyer's own e ...

Machinery and equipment for the production of concrete blocks, All prices are from Station World and the dismantling and all follow-up costs are to be made by the buyer. VAT is not included in the prices. The contractual agreements for the individual offers must be agreed separately and only apply after the contract has been legally signed. Mistake reserved. All technical details; Measurements, etc., are approximate information and are non-binding for the provider. The technical data are manufacturer or operator information and therefore non-binding for us. Used material is sold to the exclusion of any warranty. We do not accept any liability for used material. Warranty exchange and return are excluded. Customer protection is agreed between the parties. The entire process of dismantling and loading as well as transport is carried out at the buyer's own expense and at the buye ...

Format: 700 x 1020 mm R26060/18 SAKURAI screen printing machine Model: SCA 102 Built: 1989 max. print size: 700 x 1020 mm Availability: instantly automatic screen printing line high speed cylinder Special version: min: 500 x 350 mm Sheet transfer station can be folded on one side optical front edge control mechanical double-arch control via friction rollers pneumatic squeegee pressure control and sieve clamping PERFECTION high-performance dryer 1120/4: Inlet width 1100mm, 2 warm and 2 cooling zones with UV dryer MIRUS forklift model SV Etc. Available: immediately

R26115/18 VITS Impregnation and painting system Model: IPA / S / II Built: 1996 Working width: 2200 mm for finish foil and edges Working width: min. 625 mm Heating: Thermal Oil 250 Dryer control: 80 - 220 Speed: 5 - 120 m/min Impregnation plant Painting works Takeup with thermal oil boiler for impregnating, painting of decorative and similar papers from 30 - 240 g/m2 Available: immediately

Ladies and gentlemen, we offer: Machinery and equipment for stone production All prices are from Station World and the dismantling and all follow-up costs are to be made by the buyer. VAT is not included in the prices. The contractual agreements for the individual offers must be agreed separately and only apply after the contract has been legally signed. Mistake reserved. All technical details; Measurements, etc., are approximate information and are non-binding for the provider. The technical data are manufacturer or operator information and therefore non-binding for us. Used material is sold to the exclusion of any warranty. We do not accept any liability for used material. Warranty exchange and return are excluded. Customer protection is agreed between the parties. The entire process of dismantling and loading as well as transport is carried out at the buyer's own ex ...