machine for fiber used for sale

Max. speed: 90 bags/min.

Was used for filling 10l milk bags, there is a second machine as a source for spare parts available.

Was used for filling 1l milk bags, output: 1000l/h, the electronics of the machine was overhauled.

There are two identical vertical bag filling machines available, weight: 1.1t.

Product width/ height: 20-400/ 200mm, max. output: 60 cycle/min.

Max. output: 10,800 cups/min, cup format: 2x3, with documentation, film transport, main filler, laminar air over the entire filling line, laminar tunnel from the moulded part to the film lift with laminar box, die cutter with spare die cutter, packer, Mettler-Toledo weighbridge, outfeed and high stacker, regularly overhauled.

Pastry line whit tools for cutting , and filler

Rheon Model KN100 Cornucopia Encruster. Maximum speed approx. 60 pieces per minute, depending on the product. Weight capacity from 10 - 90 grams. (2) 11.5" x 8" x 7" stainless steel feed hoppers, each with (2) 2.5" diameter feed screws. Approx. 5 inches wide discharge conveyor. Digital touch controls. Compact forming, filling and portioning machine Connection 400V, 16A-CEE plug Used machine from bakery

Koppens BVE400 HD Former Stainless Koppens forming machine, comes with lots of different forming plates for different size products, previously used for hamburgers, belt 400mm, variable speed, up to 50 cycles per min, 3Ph

Illig RDM 37/10 Thermoforming Line - Made in Germany - Year of construction: 1986 - Under & Top Heating - DIV - Moulding area: 475 x 250 mm max. - Film width: 495mm min / 150mm max. - Refurbished: new bearings, new bolts, new bushings & electronics, etc. - Fully functional - with many accessories - several different forming tools Produce cups, bowls and similar products with the ILLIG RDM37/10 pneumatic forming machine. The thermoformer with forming/stamping technology works reliably with precision mechanical drives and delivers high molded part quality and performance.

Double execution packaging machine for forming, filling and sealing flat envelopes with wet wipes. The machine is in charge of folding and moistening the wipe, forming, lower sealing of the envelope, introduction of the wipe inside and upper sealing. Minimum format: 2 x (45 x 45 mm and 1.5 cc dose). Maximum format: 2 x (65 x 130 mm 20 cc dose). Min/max speed: 45 / 110 upm DOCUMENTATION AVAILABLE

Rectangular duct line from FORMTEK International. 2 reel unwinders/5TB Max Hydraulic drive. Reel width 1000/1250/1500mm 05 to 1.2mm Mild steel (galvanized) Straightening block Z stiffening Male and female clip notching. Combined shear/folder 380V/3P/50Hz CE/EXW certified PRC factory POWER UP IN PERFECT CONDITION CHANGE OF ACTIVITY

Extra Accessories: SheetMaster Sheet Metal Supplier The machine is also working at the moment Make: Trumpf Type: Trumatic 6000L Year of construction: 2006 Hours: 90,119 Travel – x – 3085 mm Travel – y – 1550 mm Travel – x (combined) – 2500 mm Cutting capacity for mild steel – 8 mm Cutting capacity for stainless steel – 6 mm Cutting capacity for aluminium – 4 mm Workpiece – 230kg Punching force - 180 KN Punching speed – 917 1/min Watt laser power: 2700 Dimensions (LxWxH): 8400x8500x2200 mm

Polytype BDM 681 Polyflex, for round cups, age 2014 only used for less than 20,000 hrs. The pre-treatment and the UV-Mandrel curing are integrated in the basic machine concept. The newly designed cup in-feed and discharge automation round off the system. The main characteristics of BDM 681 printing technology are the very high effiency, the outstanding print quality, the short change-over time as well as the excellent accessibility and ergonomics (one operator layout). Technical data: Min./max. cup height: 35 -200 mm Min./max. rim diameter: 60 - 185 mm Min./max. taper: 2 - 15° Max. print height: 145 mm Max. print length: (6 sections) 273/345 mm Max. print length: (3 sections) 418/502 mm Max. printing speed: 650 cups/min Servomotor Universal Screw Denester UV Unit with dual 6" UV-Lamps FHW 3.0 CP Corona Pretreatment with Leak Tester. The Print Heads are modern day Print Heads ...

Illig RDM75K age 1998, refurbished in 2019, with Siemens S5 PLC Controls, used only for ca. 50,000 hrs ELAU B1 Display with Touchpad controls Thermoformer with auto-start facility Indramat Servomotor Indexing Max. material width 750 mm Max. Indexing length 480 mm Top & Lower heaters, total connected load top & bottom heaters 111.3 kW Auto Transport Rail Spreading for PP Sheet Sag Control Max. Forming Area 700 x 450 mm Hydraulic Cylinder Plug Assist with Bosch Rexroth Hydraulic Power Pack, completely Overhauled in 2019 Max. Part height 150 mm Max. Mold closing force 25,000 daN Auto Lubrication system Siemens S5 PLC Controls New original ILLIG/ RITTAL Control Cabinet Cooling System added in May-2023.

ILLIG PLS75B Inline Counter/ Stacker, with Hole Punch Station, age 2006 used Inline with ILLIG RDM75K ! Max. Stacking Area: 750 x 350 mm Min Height of formed product: 25 mm Max. height of Formed Product: 150 mm Min. dia. of product : Ø 40 mm Max. dia. of Product: Ø 150 mm Max. length of Product Stack: 730 mm Output rate of Product Stacks: 1200 Stacks/ hr Rotating Head to neatly remove Products from the Thermoformer Mold Inline Hole Punch Station Inline Counter Stacker Station Compressed Air: 0.2 L at 6 bar, approximately Total Drive Rating: 19 kW Electrical specifications: 400 V, 3 phase, 50Hz (N/ PE) Cross delivery conveyor for counted cups. All Motors are Indramat Servo Motors Siemens SIMATIC TOUCH LED Operator Control Panel with Touch Pad Controls Siemens S7 PLC Controls Delivers Counted Cups/ Containers at Right Angles to machine direction New (Feb- ...

Subal bread forming machine, model: TSM-600, number: 0409301, year of construction: 2004, 0.75 kW, cloth belt, belt width: (2x) 570 mm, total dimensions: 2500 mm x 900 mm x 1450 mm.

Gaser mobile hamburger forming machine, model: V3000, serial number: 895-1546, plastic belt, belt width: 150 mm, s/s mesh belt, belt width: 125 mm, form dimensions: Ø 80 mm, total dimensions: 2100 mm x 650 mm x 1420 mm.

Description: The forming machine is equipped with automatic sheet feeding unit. The sheet feeding unit also have a top preheater by the design of Illig. It is fully equipped with pneumatic cylinders and ceramic heating elements. Approx. Onsite Dimension. (l x w x h): 7,000 x 5,000 x 4,000 mm, weight approx.: 12,000 kg

Description: Manufactured: 2005 Serial number: 1226 Operating hours: 5.745.000 cycles Material: PS, PVC, PET, PP, EPS Stations: Forming, Cutting and Stacking Forming Area: 770 x 650 mm Maximum Film width: 820 mm Maximum forming depth: 120 mm Maximum dry cycle speed: 30 cycles/min Max.Closing Force of the Cutting Press: 60 ton Maximum Pressure: 6 bar Vacuum pump motor power: 2,2 kW Total heating power of the upper oven: 36 kW Total heating power of the lower oven: 33 kW Vacuum pump capacity: 100 m^3/h Dimensions (L x W x H): 10,0 x 2,4 x 2,7 m Total Weight: 8000 kg Approx. Onsite Dimension. (l x w x h): 12,000 x 2,000 x 2,600 mm, weight approx.: 8,000 kg

Description: Paper Plate forming machine Approx. Onsite Dimension. (l x w x h): 2,000 x 1,200 x 1,800 mm, weight approx.: 500 kg

Description: Paper Plate forming machine Approx. Onsite Dimension. (l x w x h): 1,200 x 1,800 x 1,800 mm, weight approx.: 500 kg

Individually produced vacuum machines (2 pcs.) for the production of roof boxes, but also suitable for the production of other products within the dimensions below. Its maintenance is simple and its cost is very low. In addition to the two vacuum machines, the price also includes the tools required for the production of the roof box (4 types), TÜV Nord certificate, and training in the production process if necessary. Small vacuum machine: 2 pcs. sheet trays 2260 x 1060 mm (for the bottom and roof). The temperature can be adjusted per cycle. The horizontal movement of the furnace is solved pneumatically. The vertical movement of the table works pneumatically and its height is 380 mm. The vacuum capacity of the vacuum machine is 130 m3/hour. It is suitable for the production of 5 pcs of roof boxes per hour (bottom + roof). Big vacuum machine: 2 pcs. sheet trays 2380 x 1180  ...

LEISTER TRIAC heat gun, heat gun. Embossing on the device: K.LEISTER TYPE TRIAC CH-KÄGISWIL Motor 60W 220V ~6.6A Max 1460W 12820 Made in Switzerland GS S+ Used, very well preserved with signs of wear. Includes accessories, as pictured. Two-stage Cable length 3m Machine for processing and welding plastic geomembranes, shrinking plastics, films and other applications.

Verbufa forming machine, type: MFD 400, type number: 51276-C-0012, serial number: 2085952, year of construction: 2008, 230 V, 50 Hz, 10 A, dimensions: 1400 mm x 1500 mm x 1700 mm. Including 2 crates with parts.

Formatic mobile burger forming machine, S Series 180 Stacking M/C, burger form: Ø 110 mm, total dimensions: 1500 mm x 950 mm x 1900 mm. Missing outfeed belt.

Description: Serial Number: 39000135 Working length: 2540mm Double motor drive for folding botom : 2 x 2,2kw Stroke of upper opening: 350 mm , Sheet thickness: 4 mm Stroke of clamping beam 350mm Folding botom adjustment: 80 mm Geometry of clamping beam: 48 ,º Blade of the lower beam, approx. 700 N/mm²'. Manual clamping system on the clamping beam (WZS020) Rated power: 6.5kva CE-registration weight approx.: 4,500 kg, Approx. Onsite Dimension. (l x w x h): 4,314 x 1,694 x 1,510 mm

Table Device Stainless Steel Tricher Screw with electric drive for 100 mm Elisen / Gingerbread Manual operation Connection 220 V Used appliance cleaned Another 400 bakery machines in stock!

Handtmann mobile forming machine, type: FS 510, number: 43536, year of construction: 2019, 400 V, 50 Hz, 9 A, 5.5 kW, weight: 800 kg, filling flow divider unit, type: FST 546, number: 18200452, year of construction: 2019, 8 lanes, plastic belt, belt width: 600 mm, total dimensions: 3300 mm x 1280 mm x 1600 mm. Including extra plastic belt.

Description:  ,DESCRIPTION OF THE EQUIPMENT  , The 'SUPER LINE NEW GENERATION' type vacuum forming equipment is suitable for the automatic processing of thermal annealing sheets up to 8mm thickness. Specifically, they are suitable for the production of inner chambers for domestic refrigerators with the use of a few operators. The tools used are designed for positive forming. The automatic operation of the machine requires the manual selector switches to be set in the correct position. The machine is fitted with the following equipment: - Electrical equipment for the control of the manual and automatic operation of the machine, SIMATIC S7-300 'Siemens' PLC and ET200B peripheral modules for the physical operation of the machine and a 'Comi' PLC for the control of the heating panels, using a computer for data input. - Hydraulic unit with 9 Tons of pressure (lower, tool tabl ...

workpiece diameter:360 mm centre distance:600 mm turning speed range - stepless:2 - 1.550 U/min transmission ratio:2 tailstock travel:800 mm power maindrive:33 kW :160 kVA weight of the machine ca.:17 t precision flow-forming machine with 2 rolls, slides with 2 roller under 90°, central lubrication, max. round blank dia. 380mm, bed length 3.670mmm, mainspindle speeds infinitely variable, hydr. roller drive, swivellable roller bearings, coolant device 800 l, only approx. 4.300 working hours

Digital computer control top control; cutting width right 1300mm electrically adjustable conductor; high low oblique electric; can save programs; trolley 320 centimeters; cutting height 152 mm; above protection; saw cap for angled sawing available; material clamp; electric scoring device; support tray lean-to table with fixed mitre stops in top; extendable crosscut fence up to 3700 mm; 2 crosscut fence; roll on outrigger table; The additional costs are for disconnecting power, dismantling extraction and preparing the lot for transport. Extraction material is not included unless otherwise specified.

New stack turnover machine Brand: Formetal Type: RT.180 PL Technical data: Usable width of roller conveyor: 1.000/1.200 mm Length of roller conveyor: 3.300 mm Min. stack height: 1.150 mm, max. stack pelhöhe: 1.600 mm Min. stack width: 300 mm Max. stack length: 3.000 mm Max. stack weight: 2.800 kg In- and outfeed roller conveyor - Roller Ø 89 mm - Distance between roller 190 mm - Drive with fix rotation speed motor 10,5 m/min. - Installed electrical power: 5,0 kW - Pneumatical door opening system - Stack turner RT.180PL 1000 Max. stack width: 1.000 mm Working height (for roller conveyor width 1.000 mm): 250 mm - Stack turner RT.180PL 1200 Max. stack width: 1.200 mm Working height (for roller conveyor width 1.200 mm): 400 mm

CONTROLS   PLC SIEMENS S7 300 Main spindle DIN 55022 size 11 Crosshead spindle DIN 55022 size 8 Drive power main spindle 30.7 KW Drive power hydraulics 33.5 KW Main spindle speed 350 - 1000/min Workpiece diameter max. 650 mm Crosshead stroke 300 mm Ejector stroke 80 mm Crosshead contact force 400 kN

CONTROLS   PLC SIEMENS S7 300 FEEDSTOCK TUBE   external diameter min.: 59 mm   external diameter max.: 100 mm   wall thickness min.: 1.5 mm   wall thickness max.: 3 mm   length min.: 3000 mm   lenght max.: 12000 mm PRODUCT (PROFILE, TUBE)   length min.: 400 mm   lenght max.: 1500 mm System consists of:+ ASMAG pipe cutting system+ HU 32-WS-HU3-SP250 forming system+ ABB stacking stationmax. bundle weight: 5'000 kgmax. bundle diameter: 800 mmABB robot working area: 4500 x 4100 x 2500 mm

CONTROLS   PLC SIEMENS S7 FEEDSTOCK TUBE   external diameter min.: 60 mm   external diameter max.: 80 mm   wall thickness max.: 25 mm PRODUCT (PROFILE, TUBE)   length min.: 400 mm   lenght max.: 1000 mm ELECTRICAL SPECIFICATIONS   total power consumption: 95 kW   mains power supply: 200 kVA   mains voltage: 400 V   mains frequency: 50 Hz System consists of:+ VAI SEUTHE TM90-3.0 cut-to-length line, YoM 2002+ BÜLTMANN tube bundle loader incl. cut-off head , YoM 1990 + FELSS axial forming system, YoM 1997+ Hydromation unloading system, YoM 1997Cycle time approx. 20 sec.max. diameter reduction: 30 mm

CONTROLS   PLC SIEMENS S7 FEEDSTOCK TUBE   external diameter min.: 40 mm   external diameter max.: 150 mm   length min.: 260 mm   lenght max.: 1500 mm ELECTRICAL SPECIFICATIONS   total power consumption: 155 kW   mains power supply: 280 kVA   mains voltage: 400 V   mains frequency: 50 Hz System consists of:+ FELSS AYIMUS H02-4NC precision axial forming machine, year 2007+ SONTEC PR 2290 shaft testing machine, year 2007+ BACHMANN BFH 4400 automatic palletizer, year 2007 Exclusions from supply (even if visible on photos)- without chip breaker - without laser marking system

Seven tubular bag machines from Affeldt are available: Two E350 DV models (built in 1999 and 2004 with around 3 million packs and 192,460 operating hours), three AVN E350 D models (built in 1999, 2014 and 2014 with 3.7 million packs and operating hours of 14,405 and 16,305 respectively) and two AVN E350 DN models (built in 2001 and 2002 with around 5.2 million packs). The machines produce approx. 22 packs of 2.5 kg per minute. They are offered without printers and labelers. Individual sale of the machines is possible.

Forklift arms for robots Brand new manufactured

A vacuum former from the US company The Channel Letter Bender. The machine was bought in 2017 and has operated over the years around 30 hours, so it is practically brand new and is well maintained. All the technical specifications are in the PDF. Shipping dimensions 1650 mm x 2400 mm x 2400 mm ( L x W x H ) ( 65 inch x 95 inch x 95 inch ) weight 700 kg ( 1543 lbs ) Operating area 3000 mm x 3500 mm ( 118 inch x 137 inch )

Description: BENZ Type of aggregate: Lock recess trimming aggregate type FORTE Product Line: Classic Line (grease lubrication) Tool outlet: 1x Whistle Notch Ø20 mm (or Ø16 mm with reducing sleeve) with an additional saw blade alignment Ø30 mm (pitch circle diam. 52 mm) and 1x collet chuck ER16A (clamping range 1-10 mm) on the back The price is only valid for aggregates with standard interface with HSK-F63 interface and the torque supports for the following machines: Biesse, Busellato, Felder, Hiteco, HOMAG, IMA, Masterwood, Reichenbacher, SCM 1 point, SCM 3 point, Weinig. Further torque supports on request. The unit can be delivered with different machine connections. After the purchase please let us know which machine connection / torque arm the unit must be equipped with. Please refer the possibilities in the appendix. The aggregates in the pictures represent only a selection of  ...

Komatsu Forwarder 845 motor A G C O power 49 AWF - only 2000 hours engine contaminated ( presumably a wrong liquid was poured in when the machine was out in the forest ) Price from Leende - Ned. € 3.000,=

Hünnebeck Manto large frame formwork, in need of refurbishment, approx. 1350m2 Ask our special item list

Garage Schalungensanlagen Rothmund / tar we offer two complete used garage formwork The plants come from the assets of an insolvent paver of different concrete elements (ceiling, walls, garages and modules). A. garage formwork 2 Rothmund / tar and ueberarbeitet in 2004 by LAIER 5.62 X 2.78 m length and 2.95 x 6 as a fixed size, including ancillary units with spread rungsanlage to the higher level (B). Garage formwork 1 Rothmund special machines For 6 m, 6.5 m and 7 m garages, width 2.95 m set consisting of: 1.1 Set base frame, 2.1 retractable core with extension length adjustment 3.1 rear rollers wall 4.1 front rollers wall 5.2 Longitudinal walls 6.1 Set scope bracket 7.1 Set formwork for electric gate 8.1 Set hydraulic tensioner (down, sideways) 9.1 Set hydraulic system with control panel 10.1 electrical control cabinet Shaker drive 11 incl. auxiliaries (C). 15 Pallets for precast ga ...

Module formwork system EBAWE / Eilenburg we offer a used module formwork system (year 1996) The plants come from the assets of an insolvent paver of different concrete elements (ceiling, walls, garages and modules). Plant for the production of space modules in the basic sizes 6000 x 2400 mm, the height can be varied from 2,850 3.100 mm. Thus, the maximum floor height is 3,250 mm. Technical description: Taktfertigung manufactured space cells made of reinforced concrete with at least one open long side without soil in different sizes. Window and door openings, as well as large-scale breakthroughs can be provided. The system consists of the following components: 1.1 Module formwork for the production of space modules) -is the form of Chamber for the production of concrete item (space cell) -The two sides are at the stationary side walls arranged swivel -Vibrators are attached to all w ...

Hydraulic fork positioner 550-2000 mm Fork positioner hydraulically by 550-2000 mm, Stacker, has been in use at 2.5 to can be mounted but on any truck, mast, front loader, etc, with integral Sideshift. Adapter plate with mount slots for cultivation. Dimensions available upon request. Adapter plate surface area approx. 715 x 650 mm. Valve block hydraulic pump can be supplied. Sale and mistakes are expressly reserved. Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

270 sqm Hünnebeck Rasto wall formwork immediately operational BOM on request

Anchor rods DW 15, DW 20 and DW 26.5mm, different Lengths Anchor rods DW15, buttoned (30cm + 10cm approx. 15) 3,30€/piece 102 Anchor rods DW15, version shaft anchor, 3,30€/piece Hexnuts and full plates 26.5mm

Front forklift OK Type DFG KLF construction year 1969 pay load 2,500 kg axle load in front 6,230 kg - behind 2,510 kg unloaded weight 5,120 kg zulaess. Total weight 7,620 kg with questions we stand to you with pleasure at the possession.

S 400 elite S 32 professional format circular saw Trimming length 3200 mm max. cutting height 138/98 mm 90/45 with scribble max. saw blade diameter 400 mm Speed Main saw blade 4000/5000 rpm Engine power 7 kW 9.5 hp 400 V 50 Hz Prescribing 0.55 kW/0.75 hp Upper protective hood Suction nozzle diameter 120 mm Weight 715 kg G&STÜ-5504842 Option: Angular cutting device with grid division G&STÜ-5510403