machine for bending used for sale

General SKU364X914 MakeDMN Machinefabriek LocationBarneveld CEcheck TypeAL-175 DAI MZC Main Features MaterialStainless steel Motor0.55 KW Inlet diameter175 mm Specified Features - Rotating valve MaterialStainless steel 1.4401 (316) Rotary valvecheck Rotor diameter175 mm Rotor width200 mm Number of locks:8 Lock sizes80 x 80 mm Capacity5,5 l/rev. Inlet175 mm Inlet flange sizes300 mm Outlet175 mm Outlet flange sizes300 mm Installation height350 mm With motor0,55 kW, 220—242/380—420 volt, 1380 rpm Rotor speed14 rpm Air purged sealingscheck Information No.122625 Year of construction2012 Floorspace0,95x0,65 m Total height0,50 m Weight120 kgRotating valvesDMN MachinefabriekRotary valves > Rotating valvesBrand > DMN Machinefabriek What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to a ...

This DELTA pallet nailing machine line was manufactured in 2008. It features a comprehensive setup including a base nailer, a nailing machine with pneumatic feeder and nail control, units for marking, turning by 90 and 180 degrees, a corner saw, and a stacking unit, complemented by a conveyor belt. Consider the opportunity to buy this DELTA pallet nailing machine line. Contact us for more information.

General SKU271S307 MakeDMN Westinghouse Machinefabriek (NL) TypeMALD200 1 No.990510 / 40821 Year of constructionunknown LocationBarneveld Main Features MaterialMild steel Motor0.55 KW Inlet diameter200 mm Specified Features - Rotating valve MaterialMild steel Rotary valvecheck Rotor width260mm Number of locks:8 Lock sizes260x90x100mm Inletdia. 200mm Inlet flange sizesdia. 345mm stc 295mm Outletdia 200mm Outlet flange sizesdia. 345mm stc 295mm Installation height400mm With motor0,55 kW 230/400 Volt Rotor speed140 rpm Air purged sealingscheck Information Floorspace0,6x0,6 M Total height0,4 M Weight100 KgRotating valvesDMN MachinefabriekRotary valves > Rotating valvesBrand > DMN Machinefabriek What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welc ...

General SKU090W551 MakeBrabender Year of constructionunknown, With electric heating LocationBarneveld Main Features Motor6.5 KW Specified Features - Viscosity test machine Viscosity meterTorque Rheometer (1x) Motor6,8 KW Variable speedcheck Speed± 5-120 Rpm Information Extra Specifications- With 7 interchangable measuring heads DiscountViscosity test machinesBrabenderDiscountPlastic machinery > Viscosity test machinesBrand > Brabender What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU307S485 LocationBarneveld CEcheck MakeCampen Machinery A/S (DK) TypeAN 200500 Main Features MaterialStainless steel Motor5.5 KW Rotor240 mm Specified Features - Foam mixer Foam mixercheck Rotor/Stator with pinscheck Rotor sizesdia. 240x400mm Inletdia. 40mm Outletdia. 45mm With jacketcheck Motor5,5 kW 400 volt With Monopumpcheck MaterialStainless steel Information No.02 03 350 Year of construction2002 Mounted on wheelscheck With switch(as is) Floorspace2,4x1,7 M Total height1,9 M Weight1000 Kg Extra SpecificationsIncludes a spare mono pump Foam mixersCampen Machinery A/SMixers > Foam mixersBrand > Campen Machinery A/S What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please ...

USED TETRA PAK A1 TCA 200ML FILLING MACHINE FOR SALE YEAR 2013 VERSION 900v Item #: Usm-238 Category Tetra Pak A1 Used Tetra Pak A1 TCA 200ml Filling Machine For Sale. Year of manufacturing 2013c version 900v, speed 14000 packs per hour. Working hours 5920 Conversion to 65ml available.

Used Used Case Packer Machines TMG: Year: 2018 Condition: Good Used Case Packer Machines TMG Year: 2018 Speed: 5.000 bph Gluer | glue closure from below Safety protections Case packer tmg Box closing machine tmg Code: JM 91 More details: https://bottlingscout.com

Henkovac T4 – Professional Vacuum Packaging Machine (2019), Reliable vacuum performance with robust build quality for food‑industry environments., The Henkovac T4 is a compact yet powerful tabletop vacuum packaging machine engineered for professional food processors, restaurants, butcheries, and commercial kitchens. Featuring a high‑quality pump and intuitive controls, the T4 delivers consistent vacuum sealing performance for a wide range of products., Technical Specifications, - Model: Henkovac T4 (Tabletop), - Year: 2019 (design generation from this period), - Vacuum Pump Capacity: 16 m³/h – reliable throughput for medium‑duty packaging operations, - Chamber Dimensions: approx. 530 × 590 × 460 mm, - Seal Bar Length: approx. 420 mm, - Weight: ~55 kg, - Standard Power: 220‑240 V, single phase, 50/60 Hz (other voltages on request), Key Features, - High� ...

High tipping bucket 240 cm with Euro hitch, - Own weight: 793 kg, - HYDRAULIC CONNECTOR 1 Euro quick-release coupling ISO 12.5 M18x1.5 – Socket, - HYDRAULIC CONNECTOR 2 Euro quick-release coupling ISO 12.5 M18x1.5 – plug, - profiled sides to increase volume, - Volume: 2.28 m³, - Dig scraper strip HB500 150x16, - Scraper strip HB500 150x16 easy access to bolt lubrication, - tilt angle 109°

This cheese dividing machine disposes of a manually rotated turntable. This offers the possibility to cut cheese loaves and rings in segmental portions (wedges) as well as cheese loaves and bars in sticks with freely selectable stick width. Diameter of the rotated turntable: 100 cm. Cutting knife length: 105 cm. The machine is previously used for Gouda cheese loaves, Butterkäse and Tilsiter cheese (1-2 kg loaves). Light screen protection (Sick). Control panel with PLC control. Spare knife available., Type of Machine: Cheese dividing machine, Capacity: up to 40 cuts/min, Max size of the cheese: 100 x 100 x 25 cm, Total dimensions: 260 x 155 x 230 cm

Overview  This sleeve labeling machine was manufactured in 2007 by the Italian company CLEVER Machines. The machine is in very good condition, has been regularly serviced with original spare parts, and is currently dismantled and stored in a dry warehouse. It comes with an integrated shrink tunnel. Technical data  Capacity: 18,000 bottles per hour Label positions: Full bottle sleeve or partial bottom sleeve Additional components: Shrink tunnel CLEVER Machines STJ 3 Scope of Delivery  CLEVER Machines GS 4001 sleeving unit Shrink tunnel CLEVER Machines STJ 3

A laser cross-welding system is offered. Fiber laser 1500W water-cooled, cooling unit integrated, pallet truck guide, shielding gas supply, weld seam pressing device, remote access RMACC01 SECOMEA, strip width max.: 110mm, strip material: steel: 0.25mm-3.0mm, C steel: 0.25mm-2.5mm, aluminum: 0.25mm-2.5mm, copper: 0.20mm-1.2mm, dimensions W/H/L: 650mm/2054mm/1050mm, weight: approx. 650kg. Inspection possible by appointment.

Rondo jumbolina machine Stainless, Jumbolina machine with twin cutting station, belt dimensions 5400mm x 640mm, variable speed, with various different cutting heads and blades, mobile, 3Ph

General SKU390X1024 MakeHuzap TypeOktabin inliner closing machine Mach.No.20-7547 Main Features MaterialMild steel Motor5.5 KW Specified Features - Miscellaneous Motor5,5 kW, 400 volt MaterialMild steel Information Year of construction2020 LocationBarneveld Floor space4,32 x 2,20 m Total height3,50 m Weight1700 kg CEcheck Extra SpecificationsThe machine is used to weld/heat-seal (close) plastic inliners (bags”) in octabin containers. It is a mobile (movable) welding/sealing fixture that clamps and tensions the inliner foil and then performs the sealing weld. Application: heat-sealing/welding octabin inliners (plastic bags) Design: mobile/movable welding fixture (clamping + tensioning + sealing) Seal beam: 2200 mm Compressed air: 3.5 bar Air consumption: ~10 Ndm³ per welding cycle Drive system: lifting/lowering frame via gearmotor (SEW SA67 DRN80M4, 0.75 kW, 40 ...

Used Filling Monoblock for beer 800 bph Monoblock Structure The Used Filling Monoblock for beer 800 bph consists of three separate units: an automatic rinser, an isobaric filler with a double vacuum system, and a crown capper. This configuration optimizes the management of rinsing, filling, and sealing phases. As a result, the system ensures suitability for processing beer in 0.5-liter glass bottles. Moreover, this modular layout facilitates maintenance and replacement, therefore increasing operational reliability. Rotary Rinser ZPC-12 The rinser in the Used Filling Monoblock for beer 800 bph operates with a continuous rotation system and uses 12 gripping clamps. First, the operating cycle handles bottle entry. Then, it performs internal rinsing with treated water, followed by dripping and final exit. The machine handles glass bottles with a height between 150 and 330 mm and a diameter b ...

: neu : ca. 2 - 4 Wochen ab Auftr : Polen : 2510 € : 150 mm : 150 x 2000 mm : 200 x 150 mm : 530 mm : 3.5 kW : 35 m/s : 475 - 1240 mm : 1100 mm : 550 mm : 1035 mm : 115 kg Industrial-belt grinding machine Powerful motor Enclosed grinding head ensure a very effective extraction system Thermal overload protection Emergency stop Electronic motor brake Adjustable support Eye protection Stepless adjustable working height Self adjusting belt tensioner Operating manual in German or English ALTERNATIVE Version TAS 150X/2 with 2 speeds € 2.960,00 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 2 - 4 Wochen ab Auftr : Polen : 2100 € : 75 mm : 75 x 2000 mm : 200 x 75 mm : 530 mm : 3 kW : 35 m/s : 475 - 1240 mm : 1100 mm : 550 mm : 1035 mm : 100 kg Industrial-belt grinding machine Powerful motor Enclosed grinding head ensure a very effective extraction system Thermal overload protection Emergency stop Electronic motor brake Adjustable support Eye protection Stepless adjustable working height Self adjusting belt tensioner Operating manual in German or English ALTERNATIVE Version TAS 75X/2 with 2 speeds € 2.530,00 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Verbruggen Satay Skewering Machine – 2021 – As New Condition, For sale: Verbruggen Satay Skewering Machine (Traditional Satay Unit), manufactured in 2021 and presented in as new condition. A high-quality machine designed for the automatic skewering of meat, fish, tofu, vegetables, or fruit onto sticks, ideal for food producers looking to increase efficiency while maintaining an artisanal product appearance., This versatile standalone unit is easy to adapt to different products thanks to its quick-change forming plates and adjustable stick lengths. Built for reliability, simple operation, and easy cleaning., Key Features:, - Year of manufacture: 2021, - Condition: As new, - Suitable for meat, poultry, fish, tofu, vegetables, fruit, - Fast changeover between products, - Adjustable for various stick lengths, - Consistent, high-quality production output, - Hygienic and easy to clean, - R ...

Size: 385 x 700 mm Equipments: Max sheet size 700mm x 385mm Min sheet size 210mm x 140mm Min paper thickness 110mm Max paper weight 400gsm Speed 6000 (A4 creased and folded) Dimensions (L)2020mm (W)680mm (H)1265mm Power supply 240v 50/60hz Weight 190kg’s

Forklift forks, forks, forklift tines with anti-slip coatingLoad capacity: approx. 2.5 ton. Tine length: 1600 mm Tine width: 100 mm Tine thickness: 50 mm (40 mm metal + 10 mm rubber coating coating)Fork carriage height: 405 mm - suitable for tine holder: FEM 2 Form B rubber coating as anti-slip coating and for protecting transport goods? Rocker arm lockWeight: 145 kgas good as new, unusedFor a 2.5 ton. Forklift.; used

Bar diameters 8-10-12 mm Maximum Bending Angle: 180° Maximum Pulling Speed 144m/min Bending lenght : 1650 mm

Limpet coil roller machine hydraulic To form half round pipe from flat metal strip and bending into wanted radius with spiral continuous. Manufacture MG srl Year 2002 -Shafts output 80 mm -Interchangeable set of molds to form half pipe 60 mm , 90 mm , 115 mm -Coil holder for the reel metal strip with guide-way bench uncoiling and alignment the steel strip to the rolling machine -Pinching lower central roll adjustable to form the half pipe -Digital position readout to determine the bending diameter of the bending, the pitch of the spiral, the shape of the half tube forming -hydraulic arm movable in 3 directions to set the pitch for continuous coil rolling -Upper vertical support hydraulic operated to hold in position the formed diameter and collect the spiral from diameter 700 to diameter 3000 mm -Operator console electric with push buttons and digital posi ...

The machine could also be used as a transport belt conveyor. Transport input length 2.000 mm Transport output length 1.000 mm Transport width 600 mm Working height 500 - 700 mm Transport speed 7 - 35 m/min.

New stack turnover machine Brand: Formetal Type: RT.180 PL Technical data: Usable width of roller conveyor: 1.000/1.200 mm Length of roller conveyor: 3.300 mm Min. stack height: 1.150 mm, max. stack pelhöhe: 1.600 mm Min. stack width: 300 mm Max. stack length: 3.000 mm Max. stack weight: 2.800 kg In- and outfeed roller conveyor - Roller Ø 89 mm - Distance between roller 190 mm - Drive with fix rotation speed motor 10,5 m/min. - Installed electrical power: 5,0 kW - Pneumatical door opening system - Stack turner RT.180PL 1000 Max. stack width: 1.000 mm Working height (for roller conveyor width 1.000 mm): 250 mm - Stack turner RT.180PL 1200 Max. stack width: 1.200 mm Working height (for roller conveyor width 1.200 mm): 400 mm

The BIRO F2000N, F3000N, F4000N & HD3000EHN Food / Patty Forming Machines are designed for production of a wide variety of meat and food products, with maximum production output capability from approximately 2000 to 4000 formed products per hour. A large number of drum mold die shapes are available. They vary from the standard round shapes of different diameters to special shapes such as square, oval, rectangle, fish, cutlet, heart, chicken leg, chicken nuggets, rabbit, bone, tree, pork chop, etc.

Model: F-19 Jaar 1996 Conditie Gebruikt Serienummer: 326 Voorraad nummer: 2574 Belt width:, 510 mm Capacity: 25 - 75 strokes/min. Hopper: 240 kg Mould: oval, (6x) 91x69 mm Power: 3 x 400V, 50Hz, 22kW Dimensions: 3700 x 1350 x 2600 mm Weight: 2150 kg

• Stainless steel pharmaceutical version • Payload 350 kg • Lifting height top of fork approx. 140 cm without telescope • Fork width 170 cm, fork length 115 cm • Drive • New accumulator • New charger • Only 71.3 operating hours • El. connetcion 230V/50Hz

Komatsu Forwarder 845 motor A G C O power 49 AWF - only 2000 hours engine contaminated ( presumably a wrong liquid was poured in when the machine was out in the forest ) Price from Leende - Ned. € 3.000,=

The workpiece return transport consists of an air cushion table with pneumatic tilting movement, complete with pusher, return conveyor with motorised belt and a not-driven roller conveyor. The panel comes out of the edge banding machine onto the air cushion table which tilts over and drops it, with the aid of the pusher, onto the return belt, situated at a lower level. The air cushion table has transfer belts to takeover the parts from the edge banding machine. Dimensions of air cushion table 1.200 x 2.400 mm Belt width 1.300 mm Installed power 3 kW workpiece return transport is deliverable for basic edge banding machine length 3.500 up to 12.500 mm

Intelligent transport systems Brand: Formetal Type: diverse Wehrmann offers tailor-made transport systems for a wide variety of requirements. No matter whether it is about the transport of carcasses, single plates or stacks. For every transport task, however unusual, there is the optimal system, with a superordinate control that can recognize parts, send them on the right journey and integrate the connected machines. Roller conveyors, chain transports, webbing systems, link belt conveyors, turning stations, carcass erectors, carcass turners, etc ... All of these transport units, which are tailored to your requirements, are provided with a current touch-panel control computer, via which a complex line can be centrally and simply controlled. With a perfect design and tuning of the mechanical components, with a frequency-controlled speed control, both high feed rates can ...

🔧 Strong, flexible, and immediately available! Buy the Form-on clamp new  - compatible with Doka Frami - and equip your site with reliable formwork accessories . The clamp locks precisely into the profile recesses of the Frami panels and can be fixed at any position †for a secure and fast connection. ⚡ The wedge is protected against falling out, ensuring maximum safety at work. 🌍 Delivered in used reusable containers ♻ †sustainable and well protected. Please note: Containers are not included in the unit price . 🔍 Checking quality made easy: either live at our Form-on warehouse or conveniently online via smartVISIT †the fast solution to see the quality without the need to travel. 👉 Looking for Frami accessories , new clamps , or want to buy Form-on clamps right away? Then act now †before your advantage ...

Form-on multi function clamp - compatible with Doka Framax/Ringer Master  †strong, versatile, reliable 🚚   With the Form-on multi function Clamp , you can connect your frame panels in no time. It provides tension-resistant and stiffening connections †whether it’s element, adjustment, or extension connections. This allows you to work safely, stably, and flexibly on the construction site. ⭐   The galvanized surface reliably protects against corrosion, while the practical 40 cm length ensures a perfect fit for your formwork solutions. 🔧   And because we know you value efficiency, we deliver the multi function Clamp in a practical packaging unit: 🚚 100 pcs in 1 MWC   With the Form-on multi function Clamp, you choose quality that lasts †and a tool that makes your job site smarter. 💪 Price: from € 3 ...

⚡ New in the Form-on range †get yours now! ⚡ Buy the Form-on adjustable clamp new - compatible with Doka Framax/Ringer Master - and equip your project with the perfect formwork accessory . The adjustable clamp ensures a tensile-strength connection , is galvanized, robust, and delivers reliable performance †even under the toughest conditions. 💪 🌍 Packed in used reusable containers ♻ †sustainable and safely transported. Please note: Containers are not included in the unit price . 🔍 Still unsure? Convince yourself: either directly at our Form-on warehouse or conveniently and digitally via smartVISIT †the fast solution to experience the quality live without having to come by. 👉 Whether you’re looking for Framax accessories , new adjustable clamps , or want to buy Form-on adjustable clamps r ...

Form-on Quick-acting Clamp RU †compatible with Doka Framax/Ringer Master - your strong partner on site 🔧   When it comes to connecting frame panels, you need a solution that is fast, safe, and hassle-free. That’s exactly what the Form-on Quick-acting Clamp RU delivers. Thanks to its smart design, it grips flexibly into the continuous recess of the frame profiles †at any position you need. This saves you valuable time and gives you maximum freedom during assembly. ⭐   The integrated wedge is secured against falling out. For you, this means less risk, more safety, and noticeably easier handling. That way, you can complete your formwork tasks efficiently, reliably, and without unnecessary interruptions. 🚀   And because you deserve not only quality but also great value, we deliver the Form-on Quick-acting Clamp RU in a practical packagin ...

🔥 Highlight offer at Form-on! 🔥 Buy the Form-on super plate 15.0 new †available now and ready for immediate delivery. These new super plates are an absolute must-have in formwork accessories : robust, galvanized, and perfect for use with tie rods . 💪 ✨ Special extra: Delivery comes in used reusable containers ♻ †sustainable and safely packed. Note: Containers are not included in the unit price . 🔍 Want to check the quality yourself? No problem: You can inspect the material anytime at our Form-on warehouse †or conveniently via smartVISIT , the digital and fast solution to get an impression of the quality without having to come by in person. 👉 Looking for anchor plates , new super plates , or want to buy Form-on super plates right away? Then don’t miss out on this offer †only while stocks las ...

Dear Sirs, We are pleased to offer the following Used Open Die Forging Press, manufactured by Kawasaki (Japan), a well-known and reputable Japanese OEM. EQUIPMENT OVERVIEW Equipment: Open Die Forging PressManufacturer: Kawasaki (Japan) Manufacturing Year: 2012 Condition: Used, in production until May 2025 Application: Forging of rings and heavy forged components The press owner supplied forged parts (mainly rings) for power plant applications to leading OEMs such as Mitsubishi, Toshiba, GE, Hitachi, Fuji, etc. TECHNICAL SPECIFICATIONS General Press Capacity: 2,000 ton System Pressure: 30.0 MPa Pulling Capacity: 1,000 kN (100 ton) at 19.5 MPa Number of Cylinders: 3 Main Cylinder Diameter: 796 mm Press Weight: Approx. 130 ton Stroke & Daylight Stroke: 1,500 mm Daylight: 2,300 mm Table Fixed Table Size: 1,650 mm (R.L) × 2,400 mm (F.B)  ...

Formax ULTRA26 Former  The ultimate burger machine Suitable for forming a broad range of meat, poultry and non-meat products. It is commonly used by high-volume processors to form popular products such as burger patties, pork sausage, chicken fillets and chicken nuggets. Delivers precise weight and shape control while forming products with a natural texture and excellent appearance.

bushing cut-off , PKO , IFO , 2 forma packs , PNP Transfer diameter range 14-22 mm number of dies 7 number of stations 8 cutting length 4-67 mm shaft length under head 4-75 mm output - pieces/min 175 press power 200(126) to max. outside dia. of round pie 42 mm

FORCIPOL - the quality grinding machine / polishing machine for metalography that is cheap on the market - from the simple grinding machine for manual preparation to the semi-automatic machine - The FORCIPOL series is modular and can be assembled as required FORCIPOL 102: Basic grinding machine / polishing machine with a grinding wheel 250 mm and basic control FORCIPOL 202: as before, but 2 grinding wheels 250 mm For rationalization and reproducible cuts (can be combined with FORCIPOL 102 or 202): FORCIMAT 52: Sample wineer head with simple control FORCIMAT 102: Sample winer head with programmable control For the supply of lubricants and suspensions (only IN the case of FORCIMAT 52 / 102) DOSIMAT 12 - Lubricant Dosing Device DOSIMAT 52 - Lubricant and suspension dispenser (adjust integrated internal control on the device) DOSIMAT 102 - Lubricant and suspension dispenser  ...

Gr. Pulling force 10 to, gr. Stroke 1000 mm , cutting speed 7.5 m/min, return speed: 24 m/min, weight: 6.2 to, built: 1987

Gr. Pulling force: 16 to., gr. Stroke 1250 mm, Gr. Cutting speed: 5, 6 m/min Gr. Return speed: 30 m/min

mould set 0.5 lt for blow moulding machine SIDEL SBO 16 series 2

Pillow-pack machine Max 80 packages per minute thermally sealed

Weibert form7-75 Edge sanding machine infinite angle adjustment (0 ° 90 °) vertical and horizontal loop with oscillating abrasive belt (good stock removal) spring loaded clamping device for belt Diameter of the grinding roller rubberized 80 mm Belt: 2260 x 150mm Contact surface (graphite Edition) 170 x 820 mm Table height adjustment 80 mm Suction nozzle D = 100mm Engine power 2,2 KW 400V 50 Hz G & pieces 5900750

Weibert form 7-85 Edge sanding machine Infinite angle adjustment (0 ° to 90 °) Vertical and horizontal loop with oscillating abrasive belt (good stock removal) Table height adjustment by Handwheel Spring loaded clamping device for belt Grinding roller diameter 80 mm Belt: 2510 x 150mm Contact surface (graphite Edition) 180 x 950 mm Table height adjustment 80 mm Suction nozzle D = 100mm Engine power 2,2 KW 400V 50 Hz G & pieces 5900850

MADE directly from the manufacturer with PREMIUM quality stock items Description: -Conveyor belt / conveyor belt made of rubber for many applications in industry, agriculture and construction industry - new, coated on both sides, open, 2-ply reinforced bottom cover made of PVC, with mounted metal connectors made of stainless steel to the endless connect -Dimensions: 9.152 mm x width 600 mm x thickness length approx. 6.5 mm, surface with tunnels. -With 15 piece rubber studs, 50 mm high, 600 mm long, distance approx. 610 mm,. On request we can cut the belt conveyors / conveyor belts to your individual measurements. (All lengths and widths possible) Additional versions, with pimples, Stollen or structured surfaces available. Statable VAT! Not is your desired size? No problem! We customize for you! More conveyor belts, drive belt and flat belt in all other sizes available immediately ...

Weibert form7 4-way combination machine Be hem length 2250 mm option: 2600 mm Cutting height at 90 ° / 45 ° 100 / 79 mm Cutting width on the parallel fence 820 mm Saw shaft speed 4000 RPM. Blade tilt 90-45 ° Planing width 300 mm 3 blade shaft Tersa Feed speed 7 m / min Max tool diameter 210 mm Max tool diameter retractable 180 mm Spindle speed 3500/ 7000 / 10000 RPM Spindle diameter milling - saw 30 mm Engine power 400 V / 50 Hz / S6 - 40% 3 x 5,0 kW -. Weight 525 kg G & pieces 5500309

Weibert form7 52 digital Dressing thickness Planer Planing width 520 mm Tersa 4 drum Dressing table length 2250 mm Planing stroke 1500 mm 90 °-45 ° Machine cast iron tables 7 KW (9,5 HP) 400V 50 HZ Thicknessing table 850x520mm Passage of 3 / 240mm Electrical height adjustment of the Thicknesser table 4 speeds 5 / 8 / 12 / 18 m / min Dual opening system of the tables to the rear Max depth of cut 5 mm Speed 5000 min/1 1-suction port 120 mm Weight approx. 700 kg G & PIECES 5503511

Many thanks for your interest on our second hand machines, please find follow our offer: manufacturer: Rose Forgrove (APV) Type: RF 555 Flowpak YOM: 1988 output: up to 200 pieces/min. electrical: 380 V; 3 ph; 50 Hz dimensions: 4000 x 1250 x 1700 (lxwxh) Format range: length 50 - 275mm width max. 175 mm high max. 50mm discharge length: 315 mm Roll width: 450 mm Max. Rollen - ?: 330 mm (Außen), 76 mm (Innen) different: Infeed ca. 2000mm We offer this machine in as-is where-is condition excluded Vat, ex Warehouse Hess. Lichtenau, unpacked

Technical data: -Drilling capacity in steel ST 60 28 mm -Drilling capacity in steel ST 60 32 mm -Spindle mount MT 3 -Right - left rotation -Drilling spindle stroke 150 mm -Spindle speed continuously variable 80-1170 U/min -2 feed 0,1 / 0,2 mm / Rev -Throat depth 290 mm -max distance table - spindle 780 mm -Table with 2 T-slots 480 x 400 mm -Height-adjustable via rack and pinion with hand crank -Drive: 400 V / 0.9 / 1,3 kW -Space requirement approx. B 600 x H 2100 X 900 mm -Weight approx. 420 kg -with:-coolant system -Keyless drill Chuck 1-13 - lighting