machine center used for sale

Type: Vemag LPG 202 The LPG 202 length portioning machine links sausages with identical lengths and weights It can process cooked and raw sausage in natural, collagen and cellulose casings The LPG 202 length portioning machine is compatible with the following filling machines: AVG 201 ROBBY / ROBBY 2 ROBOT HP-series ROBOT DP-series Sausages are produced in the calibration range from 14 to 40+ mm Link all types of casing Extremely accurate lengths and weights Gentle treatment of casings Linking speed can be adapted to the type of casing Hygienic operation Casing magazine for artificial casings (optional) Device to detect ends of natural casings (optional) Delivery time: Machine is ready for delivery

JUST SOLD HUSKY Hypet300 HPP5 P100/100 EE100E 18.000 preforms/h (PV 14,6gr) max. 72 cavities; screw diam. 100mm; max. screw speed 108rpm; stroke 400mm; max. melt pressure 25367psi; incl. viscosity monitor PTI; incl. Plastic Systems DM20L volumetric dosing unit (2018) and PS desiccant hopper MOQOP (2018) and temp. unit HPP5H300; incl. Plastic Systems DSH 3003-C-INT 5.0 coolpik mould dehumidifier; incl. Plastic Systems TB-SD300 double softdrop unloader; NO MOLD INCLUDED max. 400V/172A; total machine dim. L13000 x W4000 x H27500; own weight total 22t; meter reads 7.416/16,6mio pressings exworks EUROPE

Updated info 35.9 grams PCO1810 HUSKY Cold Half 96 Cavities Year 2005 (Made in Canada by Husky) 31.7 grams PCO1881 Short Neck MPET Core Set 96 cavities Year 2012 (Made in Canada by Master Pet) LOW WORKING HOURS

Schickart TS 38 Bread Slicer - Bread slicer with round knife - Table machine - with cutting width adjustment - 400 volts

Horizontal turning machine manufactured in 2014. This SEIGER SLZ 500E features a center distance of 1500 mm and a swing diameter over the bed of 500 mm. It is equipped with a powerful main drive of 20/25 kW and a maximum spindle torque of approximately 1400 Nm. If you are looking to get high-quality turning capabilities, consider the SEIGER SLZ 500E machine we have for sale. Contact us for further details regarding this machine.

This 3-axis Hypertherm HPR130XD plasma cutting machine was manufactured in 2013. It features a power output of 130A with a 100% duty cycle, and operates at a voltage input of 400V. The included TEKA air extraction unit has a volumetric flow rate of 7500 m³/h and a motor power of 7.5 kW. If you are looking to get high-quality plasma cutting capabilities, consider the Hypertherm HPR130XD machine we have for sale. Contact us for further details.

Type: Clipper Tipper Tie Made completely of stainless steel and robust industrial plastics Easy to clean due to smooth surfaces Inclined surfaces to improve drainage of water S-clip on reels S-Clip: S 625, S 628, S 632, S 638 Dimension of the machine: Width: 100 cm Depth: 78 cm Height: 180 cm Power input: 0.1kW Fuse Connection: 2.5A Compressed air: 4-6 / 0,4-0,6 MPa Delivery time: 1 working day after payment

CO₂ laser cutting machine manufactured in 2006. This Prima Industrie Platino 1530 features a laser power of 4 kW, with an X-axis travel of 3,000 mm and a Y-axis travel of 1,500 mm. It includes an automatic loading system, an automatic unloading system, and a vacuum system. If you are looking to get high-quality cutting capabilities, consider the Prima Industrie Platino 1530 machine we have for sale. Contact us for further details.

ZIMMER+KREIM PEC 850 die-sinking EDM machine, year 1994. Further details, technical data and photos on request.

Two identical Dreher centrifugal drum machines are offered. Number of drums: 4, total volume: 20l, drive power: 1.5kW, direction of rotation: clockwise/counterclockwise, speed control: continuously variable. Machine dimensions: approx. 1200mm/1000mm/1600mm, weight: 280kg. An on-site inspection is possible.

Addressing machine

Collator Year ca. 1988 20 Stations Collator, with Stiching Unit and Trimmer

1 SANTONI seamless circular knitting machine type SM8-EVO4, cylinder diameter 16", 1216 needles, gauge 24, year 2006, creel for 24 bobbins. This machine was bought for development and has not more than 300 real working hours

Manufacturer: AWEMA AG Model / Type: UDM111Pos1+5 Type of machine: Universal Depositing Machine with One-Shot technology Year of manufacture: 2009 Capacity: Up to 800 kg per hour, depending on product type and mass viscosity Voltage: 3x400N+V+PE Frequency: 50 Hz Power: 9000 VA Find more here - .ucymachines/ Contact us at - sales@ucymachines

Dough pre-portioner W&P for WP BV-700 dough dividing machines - Dough pre-portioner from WP Haton - for WP BV 700 dough dividing machines / dough weighers - with pedestal and ladder - in stainless steel - Year of construction 2014

1 KERN high precision Micro 5 Axis CNC Milling & Drilling machine type HSPC 2216, year 1997, serial number 352, HEIDENHAIN type TNC 426 PB CNC 5-axes contouring controller, polymer concrete monobloc machine frame, working ranges X 220mm, Y 160mm, Z 248mm, electro pneumatic tool changer, magazine for 32 tools, tool changing time approx. 3,0 sec., mid chip-to-chip period approx. 7 sec., brushless and digital drive system travel speed 6.000 mm/min., Z-axis protection by s/s lamelles, half-round sliding door offering a maximum of operator handling comfort, standard chip tray for protection of the X and Y axis, with HEIDENHAIN electronic handwheel type TNC 426 for manual adjustment of the axes, Table 365 x 240mm, Max Clamping area 350 x 230mm, Max workpiece weight 40Kg, 4th & 5th Axis attachment, Fischer Precise Spindle 42,000rpm, 2.6Kw, HSK25E Tool Adapter,  ...

GE mobile X-ray machine VMX • Before taking over, all devices or systems have been tested on site for their functionality. • The system is located in our warehouse in Freiberg / Germany and can be picked up immediately. • You buy the system in "ACTUAL" condition from the warehouse Freiberg (EXW), Saxony, Germany, and advance payment. • The sale takes place as "used", EXW Freiberg, Saxony, Germany, to resellers or dealers despite full functionality without guarantee. • The installation and configuration of the system or the system components must be carried out by a specialist or technician authorized by the manufacturer!

1 PIMATEX high temperature sample dyeing machine type Draw-Lab 140/5, year 1994, capacity 5 Kg, machine equipped with filter and addition vat, SETEX 505 dye cycle controller, circulation pump controlled per SIEMENS inverter, machine delivered fully erected because electrical panel and pneumatics don't need to be disconnected

2 Head Paper Drilling Machine

This 3-axis MTE BF 4200 was manufactured in 2002. It features an impressive X-axis travel of 4,000 mm and Y-axis travel of 1,200 mm, with a robust table size of 4,200 × 1,000 mm and a maximum table load of 13,000 kg. If you are looking to get high-quality milling capabilities, consider the MTE BF 4200 bed type milling machine we have for sale. Contact us for further details.

This 3-axis MTE BF 2200 Bed Type Milling Machine was manufactured in 2004. It features a substantial X-axis travel of 2,000 mm, Y-axis travel of 1,000 mm, and Z-axis travel of 1,000 mm. The machine includes a large table size of 2,200 × 1,000 mm and can handle a maximum table load of approximately 7,200 kg. If you are looking to get high-quality milling capabilities, consider the MTE BF 2200 machine we have for sale. Contact us for further details.

Small SHIMA SEIKI knitting unit composed of: 1 SHIMA SEIKI flat bed knitting machine, type SES122FF, GG 12 1 SHIMA SEIKI flat bed knitting machine, type SES122RT, GG 12 1 SHIMA SEIKI flat bed knitting machine, type SES122S, GG 7 1 SHIMA SEIKI design programming computer type DS ONE (E) Model VX2000, 1 SIMET electronic Winder with deknitting device model SED/6,6 winding heads, 6” traverse, works as a normal cone to cone winder and permits to recover the yarn from defective knitting clothes

Reference Num.: 4467 Brand: Theisen Bonitz Type: TB Sprint 315 VP + 303 Construction year: 1995 Available: directly Status: In production Location: Deutschland Equipment: - 15 Stationen - Doppelbogenkontrolle - Fehlbogenkontrolle - Heft-, Falz-, Schneideaggregat Theisen Bonitz

Travel X/Y/Z/W: 1500mm/1250mm/1000mm/550mm, B-axis: 360°, boring spindle diameter: 110mm, spindle speed: 4000rpm, gear ranges: 2, rapid traverse: 15m/min, tool taper: SK50, table dimensions X/Y: 1000mm/1250mm, T-slot width: 22mm, height of clamping surface above floor: 1050mm, max. table load: 6000kg, control: Heidenhain TNC 426. With electronic handwheel. Weight: approx. 13500kg. An on-site inspection is possible.

1 MENSCHNER doubling / folding and measuring machine type RW 24/59 D, year 2001, folds article up to 300 cm in half it's width, with meter counter, with automatic selvedge control and overlaying device, entry with contact A-frame unwinder, mall roll or folded article, exit in roll of folded article, machine's motors are fully inverter controlled, with SIEMENS PLC type S7

Travel X/Y/Z: 650mm/500mm/475mm, table dimensions X/Y: 1530mm/450mm, max. table load: 400kg, spindle taper: SK40, max. spindle speed: 4000rpm, spindle power: 7.5kW, milling head swivel range: 140°, control: Heidenhain TNC 620. Weight: approx. 2750kg, machine dimensions X/Y/Z: approx. 2200mm/2300mm/2050mm. An on-site inspection is possible.

Condition: used, with visible signs of use, was operational until placed in storage, control voltage: 24V, operating voltage: 230V, frequency: 50Hz, CO₂ pressure: 10bar, connected load: 500W, with CE marking. An on-site inspection is possible.

Automatic Coil Cut-to-Length Line manufactured in 2025. This SACFORM CRL1503-6 is designed for processing aluminum, mild steel, and stainless steel with a material thickness capacity of 1-3 mm. It features a maximum coil weight of 6000 kg and a finished sheet length of 500-4000 mm. If you are looking to get high-quality cut-to-length capabilities, consider the SACFORM CRL1503-6 machine we have for sale. Contact us for further details regarding this machine.

1 THIES high temperature sample dyeing machine type Mini-Soft 140/1, capacity up to 20 Kg year 1991 SEDO PC150V = THIES T5 controller, addition vessel, circulation and injection pump, equipped with filter, winch speed is inverter controlled, with loading and unloading winch

2 Head Stapling Machine Year: ca. 1987

Dimensions (L/W/H): 2650x950x1850 mm Weight: 2100 kg Total power requirement: 15 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

SCM C30 4-fold combination machine Format Circular Saw Dressing Thickness Planer Machine Milling Machine Planing width 300mm Planing shaft: 3-tersa knife shaft Dressing table length: 1200mm Passage height: 3-200mm Format sliding table: 1070mm Besaeumlaenge Cutting height: 80mm Saw 90°-45° swivel Engine power: 400V 2 hp S1 Milling machine rigid 90° Milling machine rpm: Speeds of 4200-6300 rpm or 5000-7500 rpm G&STÜ-5500030 relkag21 SPECIAL PRICE: Fits in any small workshop!

Manufacturer: Rudholzer Type of Machine: Welding machine Year of Manufacture: 2018 Materials Processed: PC + ABS/GF Product-Contact Parts Construction: Steel Key Technical Specifications: - Length 3, Width 3, Height 4 (cm or m) - Weight 4000 kg - Voltage 400 Volts - Current 83 Amperes - Power 57.6 (Kw or KVA) - Frequency 60 Hz - Phases 3 - Compressed air 7 (bar or psi) Find more here - .ucymachines/ Contact us at - sales@ucymachines

Table clamping surface: x-travel: 400 mm y-travel: 175 mm z-travel: 450 mm Spindle mount: ISO 30 Spindle speeds: 50-2000/50-3400 rpm Operating voltage: 380 V Total power requirement: approx. 2.5 kVA kW Space requirement: 1200 x 1000 x 1600 mm Weight: approx. 1100 kg

round material: 30 x 1 mm square material: 30 x 30 x 1 mm : 16 mm : 30 x 10 mm speeds: 9 U/min total power requirement: 1,1 kW weight of the machine ca.: 0,32 t dimensions of the machine ca.: 0,82 x 0,60 x 1,26 m Electric roller profile with - 5 set of rollers 2x 20mm and 30mm for round material, 1x for flat material 1x for square material 1x for? - footswitch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manufacturer: MAKA Model: DC 7 D Year of Manufacture: 2016 Type of Machine: Milling machine Materials Processed: PC + ABS/GF Product-Contact Parts Construction: Steel Key Technical Specifications: - Length 10, Width 4, Height 3 (cm or m) - Weight 4000 kg - Voltage 480 Volts - Current 65 Amperes - Frequency 60 Hz - Phases 3 - Compressed air 7 (bar or psi) Find more here - .ucymachines/ Contact us at - sales@ucymachines

Manufacturer: MAKA Model: DC 7 D Year of Manufacture:2018 Type of Machine: Milling machine Materials Processed: PC + ABS/GF Product-Contact Parts Construction: Steel Key Technical Specifications: - Length 10, Width 4, Height 3 (cm or m) - Weight 4000 kg - Voltage 480 Volts - Current 65 Amperes - Frequency 60 Hz - Phases 3 - Compressed air 7 (bar or psi) Find more here - .ucymachines/ Contact us at - sales@ucymachines

Surface grinding machine manufactured in 2016. This OKAMOTO ACC 52 SA features a grinding length of 500 mm and a grinding width of 200 mm, with a maximum table load of 200 kg. The hydraulic table feed rate reaches up to 27 m/min, and the spindle speed can go up to 3,500 rpm. If you are looking to get high-quality grinding capabilities, consider the OKAMOTO ACC 52 SA machine we have for sale. Contact us for further details.

Folding and Inserting Machine: speed: upto 4.000 per hour, maximum monthly performance: 70.000, maximum annual output: 600.000, power required: 230 V, noise level:

Laser source: Bystronic BLT 3500 Turbo, laser power: 3500W, wavelength: 10600nm, max. sheet weight: 160kg/m². Base machine weight: approx. 7000kg, laser source weight: approx. 1600kg. Documentation available. An on-site inspection is possible.

LM 175 S solvent cleaning machine was built in 2000 in Italy by AMA UNIVERSAL. The machine is used for the effective removal of oil, grease and other contaminants from workpieces, machine parts and tools. Cleaning takes place inside a closed work chamber using perchloroethylene (PER). A basket with dimensions of 550 x 300 x 300 mm and a load capacity of 80 kg enables cleaning of a larger number of parts. Once the cycle is complete, the used solvent is fed into the filtration and distillation system, where it is cleaned and prepared for reuse. This solution reduces the consumption of the cleaning medium and helps to lower the machine’s operating costs. The LM 175 S is also equipped with an ultrasonic cleaning system with a power of 1200 W and a frequency of 23000 Hz. The use of ultrasonics helps to remove contaminants even from hard-to-reach surfaces, including holes, gaps and variou ...

ITF Coclea LC 5/4 rotary drum washer was built in 2006 in Italy by I.T.F. S.r.l. Impianti Trattamenti Finiture. The machine is designed to clean large quantities of very small metal parts that are contaminated with oils, greases, emulsions or other contaminants. Cleaning takes place inside a rotating drum, which ensures that the parts are constantly in motion. As a result, all surfaces of the parts are evenly exposed to the cleaning agent, enabling the effective removal of contaminants even from hard-to-reach places. The Coclea LC 5/4 rotary drum parts washer is used in manufacturing plants and wherever the rapid, effective and repeatable cleaning of large numbers of parts is essential. Technical specifications of the ITF Coclea LC 5/4 rotary drum washer - compressed air pressure: 6 bar - control voltage: 24 VAC - power supply of the ITF machine: 3x 400 V

Arburg 420C-1300-675 (167) Item number: 167 Availability: In stock Year of construction: 2000 Brand: Arburg Specifications Spray weight: 297 g Clamping force: 1,300 kN Screw diameter: 50 mm Spray pressure: 2080 bar Spar spacing: 420 x 420 mm Clamping plate size: 615 x 615 mm Tool installation height min.: 350 mm Control: Selogica Language: German Power: 44.9 kW Operating hours: 84840 h Weight: 4330 kg Dimensions: 4.9 x 1.8 m Funnel: No Core train: Yes Air valve: Yes

CHMER GX430L+ wire EDM was built in 2018 in Taiwan by CHING HUNG MACHINERY & ELECTRIC INDUSTRIAL CO., LTD. The machine is designed for the precision machining of workpieces using the electrical discharge machining. This technology enables the creation of complex shapes even in the hardest materials, whilst maintaining high dimensional accuracy and excellent surface quality. As a result, the wire EDM is ideal for the production of precision dies, cutting dies, punches and other parts that require high accuracy. The CHMER GX430L+ performs machining with a cutting head that moves in 5 axes. The X and Y axes are driven by linear motors, whilst the Z, U and V axes are equipped with precision servo drives and AC motors. This solution ensures smooth movement of the head, high positioning accuracy and stable operation even under intensive use. The automatic wire threading system reduces the t ...

Spiral kneader Diosna SP 120 D Spiral kneading dough kneader from Diosna SP 120 D with solid stainless steel boiler for a maximum of 120 kg of dough.Kneading process over time with 2 timers, with automatic switching and shutdown.Trade-in and delivery on request. Type: SP 120 D mobile for max. 75kg flour or for max. 120kg dough with 2 automatic timers Spiral and boiler made of stainless material Boiler diameter 75cm Boiler capacity approx. 180 litres Machine can be driven on castors with a swivel castor Locking by 2 locks with plastic flour dust cover Stainless steel spiral and boiler 400 Volt frequency 50 Hz Weight of the machine approx. 550 kg Condition "good"

Control panel Pacmation made of Uhlmann C130 YOC 1996

Decorker, Fabr. Rink, Type: KM 670/2K as box uncorker, 2-head, 2,000 K/h, clock machine Running direction: li->re with decorker plate for 24 module box 0.33 lt, box longitudinal run attached control cabinet in VA with Siemens S7-300 control and operating module OP-Siemens