machine center used for sale

The machine is in good technical condition, after prior agreement it is possible to test it. Maximum size of the machined part mm 1330 x 900 x 595 Max. weight of the machined part kg 5000 Axis travel X/Y/Z/U/V mm 800 / 600 / 400 / 150 / 150 Diameter of the wire used mm 0.15-03 Continuously controlled 4 axes X, Y, U, V Drive system using AC servo drives Max. cut cone 22.5 / 100 mm Accuracy class of ball screws rpm C1 - highest Filtration system capacity l Main tank 1630l, secondary tank (Z=600) 1280 l Max. cutting speed mm/min 250 Dielectric conductivity measurement Auto – 5 ~ 200 kW-cm Dielectric temperature measurement Auto with accuracy 1C Power input kVA 15 Machine footprint mm 4350 x 3600 Height mm 2740 Machine weight approx. kg 8500 • Windows CE control system (described above) • vertical leveling device • paper filter 2 pcs • deionization resin - 1st fill • deionizati ...

current intensivity: 400 A open-circuit voltage: 65-75 V IP protection class: IP21 Permissible load at 35% duty cycle 400 A at 60% duty cycle 315 A at 100% duty cycle 250 A Idle power 0.49 kW Application class: S - Water cooled - With hand and foot remote control - Incl. Hose package approx. 6000 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 550 mm y-travel: 1200 mm z-travel: 450 mm control: 85er 8bit total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

drill diameter: 1,5 - 25 mm lip angle: 40 - 180 ° 6-jaw-chucks: various equipment: manual included: Encapsulated drive motor: closed version, air-cooled, rotary and AC drills with cylindrical or conical shank left and right-hand drills 6 Jaw chuck Device for compressed air cooling various equipment (see pictures) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

SAHINLER HKM 115 hydraulic ironworker machine was built in Turkey by Şahinler Metal Makina Endüstri A.Ş. It is an extremely versatile machine designed for complex machining of structural steel (S235 / S355). It is capable of performing processes such as precise hole and corner punching, as well as shearing flat bars, angle bars and bars. All these operations are performed at 5 individual workstations. Each station is controlled by two hydraulic cylinders and separate foot switch controllers. The use of this solution enables independent or parallel operation of the machine by two operators at two stations simultaneously. The stroke of each cylinder is adjustable in order to increase productivity. All of this makes the offered HKM 115 ironworker machine the perfect solution for increasing production efficiency in production facilities and locksmith workshops. The total weight of the mac ...

x-travel: 22.000 mm y-travel: 1.500 mm z-travel: 3.000 mm Control: SIEMENS 840 D milling head -swivable: 0,001/0,001 Grad milling head: Universalfräskopf 45° Internal cooling system: 20 bar Chip coveyor: ja Tools changer: 30 pos. coolant: 1.100 l Tool taper: DIN 69871A ISO 50 total power requirement: 45 kW weight of the machine ca.: 68 t The round table shown in the pictures as well as the plate field are not sold with ! urning Speeds 6.000 r.p.m. AutoIndex Head 45 º Head 360.000 Pos. Elbow 360.000 Pos. Main Motor Power 37 Kw. Nº Change Range 2 Ranges Automatic Tool Charger INCLUDED Tools at ATC 30 Coolant Through Tool 20 Bar INCLUDED Soluble Oil Tank with filter paper INCLUDED Head Coolant System + CF Box INCLUDED Longitudinal Chip Conveyor INCLUDED Operator?s Platformd with 2000 mm Vertical movement. INCLUDED Ready for Rotor Translating Table (Regulator + Wires) /IN ...

: 55 mm : M 30 : M 36 : MK 4 spindle turning speed - stepless: 70-1.200 U/min spindle stroke: 140 mm throat: 300 mm column diameter: 145 mm : 615x430 mm distance spindle /table: min./max. 150/735 mm : 2 x 14 x 224 mm feed: 0,1 + 0,3 mm/U Machine height: 1850 mm weight: 380 kg drive motor: 1,8/2,9 kW Standard equipment: - Lockable main switch with motor protection switch - Mushroom pushbutton (latching) for EMERGENCY STOP - Infinitely variable speed adjustment - Digital speed display - Feed overload protection - Protection class IP 54 - Spindle protection with electrical fuse Item 20.1 Thread cutting device with foot switch, for thread cutting with Stop, max. 6 threads / min., (Thread cutting performance dependent on spindle speed) ! NEW FOR YOU AS A SERVICE ! Machine leasing up to 60 months without down payment, without residual value, personal advice and individual leasing rate calcu ...

bore capacity in steel (diameter): 40 mm throat: 293 mm bore stroke: 120 mm spindle taper MT: 3 column diameter: 115 mm table surface area: 514 x 360 mm spindle turning speed - stepless: 160 - 2250 U/min total power requirement: 1,0/1,6 kW weight of the machine ca.: 0,285 t dimensions of the machine ca.: m Condition: new / unused: The machine can be viewed under current.: 37981 400 V, 50 Hz, colour: light grey RAL 7035 continuous speed control, digital speed indication, push button for emergency switch off, turning switch for clockwise/counterclockwise rotation, motor protection switch, IP 54, connecting plug, finish: structure varnish, new spindle bearing, new step pulleys, belts aso. operation manual, wiring diagram. Machine has been checked in our workshop, including electr. testing report. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

MUBEA PROFI 500 hydraulic ironworker machine was built in Germany by Muhr und Bender Maschinenbau GmbH (Mubea). The machine, designed for complex machining of steel workpieces, is equipped with 4 individual workstations. They are capable of performing such processes as precise hole punching, as well as shearing flat bars, angle bars and bars. Each station is hydraulically controlled. The extremely robust design of the machine additionally ensures maximum process stability during even the most intensive challenges. All of this makes the offered Muhr & Bender PROFI 500 ironworker machine the perfect choice for increasing production efficiency in industrial facilities and locksmith workshops. Technical specifications of the MUBEA PROFI 500 ironworker machine General data - maximum press force: 50 t (500 kN) - number of workstations on the Muhr und Bender PROFI 500 machine: 4 Flat b ...

Double pump for Krauss Maffei machines Voith Rexroth control pumps 3-fold SY2DFE1-21/071-071 KM No. 6441936 MNR: R900751978

Specifications: - Drilling capacity in steel ST 60 30 mm - Drilling spindle holder MK 3 - 4 feeds 0.1 - 0.16 - 0.25 - 0.4 mm/U - Drilling spindle speeds in gear stages 95 - 2000 rpm - Right - Left - Drilling spindle stroke 160 mm - Projection 350 mm - Table with 3 T-slots height-adjustable 340 x 320 mm - Table can be tilted left + right - distance table – drilling spindle 500 mm - distance machined base plate – drilling spindle 1050 mm - Column diameter 160 mm - Lighting - Coolant device - Drive 400 V / 2.4 kW - Space requirement approx. W 600 x H 1950 x D 800 mm - Weight approx. 350 kg

brand: CKD BLANSKO Model: SKHK 50 plateau diameter: 4770 mm maximum diameter: 5200 mm ram stroke: 2000 mm maximum height: 3000 mm capacity: 50 ton. Plateau revolutions: 1 range: 0.4-12/ 2 range: 1.6-50

With matching spacer rings according to photos. Scope of delivery according to photo 1.

PEDDINGHAUS Hydraulic 800 hydraulic punching machine was manufactured in Germany by Paul Ferdinand Peddinghaus GmbH. This highly reliable machine is used for the precision machining of angle bars and flat bars. It enables the punching of square and round holes in structural steel workpieces with a maximum thickness of 25 mm. The machining process is performed with a high press force of up to 80 tonnes by means of punches. The perfectly balanced design of the machine maintains excellent stability even during the most intensive challenges. All of this makes the PEDDINGHAUS Hydraulic 800 an excellent addition to industrial facilities and locksmith workshops. The total weight of the machine is approximately 1500 kg. Technical specifications of the PEDDINGHAUS Hydraulic 800 punching machine General data - maximum press force: 80 t (800 kN) - throat depth: approx. 200 mm - working heigh ...

Code: 0383 Brand: DUE B.ERRE STEMA - ITALY Model: SPINAMATIC GLF HP - CE Standard Machine for applying thick glue and dowels with pneumatic gun for panels, for doors, windows and various - CE Standard Technical data Max insertion capacity 60 dowels per minute Dowel diameter mm 10/12 mm Dowel length mm 25 to 50 mm Max insertion depth 30 mm Machine works with one diameter of dowels at a time Electronic dosing of glue quantity Washing system Flexible arm provided with counterweight that makes the gun lighter during the work cycle (gun weight approx 3 kg) Recommended adhesive type: Water-based emulsion adhesive - Viscosity Brookfield 580 mPa.s - Solids content 30% - Min film formation temperature 3–5 °C - Cleaning with water Wheels on base Voltage 220 V single-phase Max pressure 6 atm Overall dimensions mm 600 x 1000 x 2100 h Weight kg 130

Used flow pack packaging machine. Manufacturer Chemosvit Strojchem, model BH-07W. New 2017. Capacity 15-250 pcs/min. Available 3 pcs. (2 used and 1 almost unused)

Total lenght 2800mm

x-travel: 3500 mm y-travel: 900 mm z-travel: 1000 mm Control: heidenhain tnc 415B total power requirement: 22 /spindel kW weight of the machine ca.: 16.5 t dimensions of the machine ca.: 7.2x3.9x3.2 m Make SORALUCE Type Soramill SL 5000 Built in 1995 Control type HEIDENHAIN TNC 415 B Table size (mm) 5000 x 800 mm X out (mm) 3500 Y-off (mm) 900 Z-off (mm) 1000 Maximum table load 12,5 ton Speed (RPM) 20-. 2,000 Tool holder ISO 50 Feed along (mm/Rev) 5 - 10000 mm / min. Rapid traverse 12 mtr/min. Gesamtleistung(kW) 22 Length (mm) 7250 Width (mm) 3900 Height (mm) 3200 Weight 16500 kg Additional information Automatically indexierender Swivel Head with 2 x 144 positions (2.5 ° pitch) in two levels above the control programmable Cooling medium institution The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

We ask for self-dismantling. Machinery List: 1 x rack oven with oil burner Heuft type. nonplusultra Bj. 2009 with fireplace 1 x rack oven with oil burner Heuft type. nonplusultra Bj. 2009 with fireplace 1 x rack oven with oil burner Heuft type. nonplusultra Bj. 2009 with fireplace 1 x rack oven with oil burner Heuft type. nonplusultra Bj. 2009 with fireplace 1 x rack oven with oil burner Heuft type. nonplusultra Bj. 2009 with fireplace 1 x rack oven with oil burner Heuft type. nonplusultra Bj. 2009 with fireplace including oil feed pump for all 6 furnaces 1 x basket washing system built in 2009 1 x Apricot and glaze line Dojatec 2009 1 x Proofer for 10 rack trolleys trays 60x 40 Koma BJ. 2009 including chiller 1 x Proofer for 10 rack trolleys trays 60x 40 Koma BJ. 2009 1 x Proofer for 10 rack trolleys trays 60x 40 Koma BJ. 2009 1x large Carrier freezer 50 pallet  ...

.

1 of used carton erector with bottom sealer, make STORK, type SA-25L (KOALA), new 1989, size adjustable. With Siemens S5-100U PLC, Nordson 2302 hot-melt unit and blank feed conveyor. Left to right as seen from operator’s side. Capacity maximum 25 cartons/minute (depending on size). Carton dimensions: length: 150 - 450 mm, width: 100 - 400 mm, height: 180 - 400 mm. Blank dimensions: min 250 x 280 / max 850 x 750 mm. Fully guarded. Manuals available.

No tool changer.

Deburring machine, pipe deburrer, bore deburrer, deburring device, brush deburring machine, wire brush -Manufacturer: wrt, deburring machine with base -Drive: 3.0 kW / 2800 rpm -Brush: Ø 250 mm -Shaft: Ø 80 x 110 mm -Dimensions: 660/430/H1200 mm -Weight: 101 kg

sheet width: 2500 mm plate thickness: 30 mm pre-bending: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Stocknumber 2210015 Type of machine Hydr. 3-roll bending machine Make HAUSLER Type RMA 2500/30 Build in 1962 Type of control conventional Additional information max. widht 2500 mm Max. plate thickness 30 mm 3 rolls diameter upper oll 450 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding diameter: 610 mm grinding length: 3000 mm centre height: mm total power requirement: 30 kW weight of the machine ca.: t dimensions of the machine ca.: m Stocknumber 1310015 Type of machine Cylindric grinder Make STANKO Type 3M193/149 Build in 1988 Max. grinding diameter 610 Max. grinding length 3000 Grinding wheel diameter 700 Grinding wheel widht 75 Total Power (KW) 30 Additional information Incl. 2 staedys The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 50 mm arm length: 1500 mm workpiece height max.: mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Stocknumber 1610008 Type of machine Radial drill Make MAS Type VO 50 Admision in drilling spindle MT 5 Max. drill capacity 50 mm Base dimensions 1820 x 986 mm Speeds (Rpm) 28 - 2500 Feeds (mm/R) 0,5 - 2 Lenght (mm) 3250 Width (mm) 1120 Height (mm) 3396 Weight 4550 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 5000 mm y-travel: 3100 mm z-travel: 1200 mm Control: total power requirement: 20/27 kW weight of the machine ca.: 65 t dimensions of the machine ca.: 15x6,2x6 m Stock number 1110051 Machine type CNC Portal milling machine Make CORREA Rapid type 50 Year of manufacture 2004 Control type HEIDENHAIN Table size (mm) 5000 x 2000 mm X out (mm) 5000 mm Y-off (mm) 3100 mm Z-off (mm) 1200 mm Table load Max 15 ton Speed (RPM) Max 18,000 Tool holder HSK 63 Gesamtleistung(kW) 20/27 Length (mm) 15000 Width (mm) 6200 Height (mm) 6000 Weight 65 ton Additional information Tool changer for 24 tools 5-axis gesteuerd The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 3000 mm table width: 2500 mm table load: 40 t total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Stocknumber 1210059 Type of machine Rotary table Make SCHIESS Type 25/30 Type of control X-stroke (mm) 2.000 Table dimensions (mm) 3.000 x 2.500 Table rotation (degrees) 360 Additional information Max. tableload 40 ton The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 406 mm, 584 mm

Inv. Num. : 9153 Type: DS-30SSY Producer: HAAS Created: 2015 Parameters: Hours: 3002 h Maximum turning length: 584.2 mm Maximum turning diameter: 406.4 mm Maximum turning diameter over bed: 807.7 mm X-axis travel: 317.5 mm Y-axis travel: 50.6 mm Travel Z-axis: 584 mm Maximum main spindle power: 14 kVA Maximum spindle speed: 4800 1/min Number of all tools: 24 pieces Spindle bore: 88.9 mm Weight: 7259 kg Equipment: Chip conveyor Pick-up spindle C-axis Bar Feeder Tool Alignment System System for removing parts after cutting Driven Axial Holder ER32 (Heimatec) Driven radial bracket ER32 (Heimatec) Holders for rotary tools, other holders and jaws

grinding diameter: 250 mm grinding length: 650 mm centre height: mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Brand: Glauchau Type: SI 6/3 CNC brand: Siemens CNC model: Sinumerik Year of make: 1997 CNC controlled Maximum grinding depth: 250 mm Grinding diameter: 650 mm ø Rapid traverse: 10 m/min Speed: 50 - 500 RPM Inner grinder X (inner grinding device): 155 mm Length displacement interior grinding device on the table: 540 mm Tool grinding device Z (table move): 700 mm Circulation diameter: 650 mm ø Grindig diameter for internal grinding: 10 - 500 mm ø The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding diameter: 1400 mm grinding length: 3500 mm centre height: mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Stocknumber 1310013 Type of machine Super finishing machine Make NAXOS UNION Type WT 140/3500 Build in 1975 Max. grinding diameter 1400 mm Max. grinding length 3500 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Jig boring mill, fine boring mill, plate boring mill, table boring mill, boring mill, milling machine, -Table dimensions: 700 x 405 mm -Travel paths: Z 330 mm/Y 410 mm/X 630 mm -Quick stroke: 155 mm -Recording: MK4 -Speeds: 31 - 1500 rpm -Dimensions: 1570/1800/H2600 mm -Weight: 2600 kg

sheet width: 3554 mm plate thickness: 42 mm pre-bending: 36 mm Control: total power requirement: kW weight of the machine ca.: 49 t dimensions of the machine ca.: 7.3x2.4x2.5 m Stocknumber 2210024 Type of machine 4-roll CNC Plate bending machine Make FACCIN Type 4HEL 3554 Build in 2000 Type of control CNC Additional information Cap. 3554 x 42 mm prebending 36 mm Toprolldiam. 540 mm underrolldiam. 530 mm siterolldiam. 430 mm 55 Kw LxWxH= 7350 x 2400 x 2500 mm weight of the machine 49 ton The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 6000 mm y-travel: 2000 mm z-travel: 3000 mm Control: heidenhain TNC 415 total power requirement: 34 kW weight of the machine ca.: 31 t dimensions of the machine ca.: 7000 mm m Stocknumber 1110055 Type of machine CNC Floortype milling machine Make ZAYER Type KCU6000 Build in 1992 Type of control Heidenhain TNC 415 X-stroke (mm) 6.000 Y-stroke (mm) 2.000 Z-stroke (mm) 3.000 Speeds (Rpm) 20 - 1.800 Admission in spindlehead BT50 Feeds X (mm/R) 5 - 5000 mm/min Feeds Y (mm/R) 5- 5000 mm/min. Feeds Z (mm/R) 5- 5000 mm/min. Rapid feeds 10.000 mm/min. Total Power (KW) 34 Lenght (mm) 11.000 Width (mm) 2.500 Height (mm) 7.000 Weight 31.000 Kg Additional information Juaristi MG6 turntable: 1500 x 1200 mm Cooling system: 2.5 Bar Tool cooling: 15 Bar The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

faceplate diameter: 1000 mm swing diameter: 1400 mm turning height: 1400 mm control: SIEMENS 850M total power requirement: 125 kW weight of the machine ca.: 38 t dimensions of the machine ca.: m Stocknumber 1020042 Type of machine CNC VTL Make PIETRO CARNAGHI Type AC 10 CNC Build in 1987 Type of control Siemens 850 M/E Faceplate diameter 1000 mm Max. Swing diameter 1400 mm Turning height max. 1400 mm Total Power (KW) totaal 125 Lenght (mm) 11000 Width (mm) 8000 Height (mm) 6000 Weight 38000 kg Additional information with driven tools with pallet changer The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Remote control for inert gas welding device, inert gas device, welding rectifier, hand controller -Manufacturer: Fronius, remote control RCU5000i Univ.SD -Art.No.: 4,046,098 -Voltage: U1 24 V -Dimensions: 180/260/H50 mm -Weight: 1.5 kg

Multifunctional punch, punch press, hole punch, pneumatic hole punch -operated: pneumatically -Year of manufacture: 1995

table length: 2750 mm table width: 2750 mm table load: 80 t total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Stocknumber 1210070 Type of machine Rotary table Make ASQUITH Type 2750/80 Build in NB Type of control conventional X-stroke (mm) 2200 Table dimensions (mm) 2750 x2750 Additional information max. table load 80 ton The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Super clean 1993 Bridgeport EZ trak SX 2 axis mill. Machine is in very nice condition. It has none of the usual battle scars from use and appears to have been used very little. The control boots up as it should and both axis motors work smoothly. SPECIFICATIONS: Capacity 9" x 48" Table Size 9" x 48" Longitudinal Travel 30" Cross Travel 12" Vertical Knee Travel 16" Spindle Speeds (Variable) 60-4200 RPM Spindle Taper R-8 Spindle Quill Travel 5" Positioning Speed (X-Y Axis) 100 IPM Feed Rate (X-Y Axis, Variable) 0.1-100 IPM Spindle Quill Feeds (3) 0.0015" - 0.003" - 0.006" Ram Travel 12" Distance, Table To Spindle Nose 2 1/2" - 18 1/4" Throat Distance 6 3/4" - 18 3/4"

faceplate diameter: 3.000 mm swing diameter: 7.000 mm turning height: 3.000 mm Control: FANUC 18i-TB total power requirement: 60/75 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 2200 mm table width: 2200 mm table load: 16 t Control: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Stocknumber 1210063 Type of machine CNC Rotary table Make TOS Type SK 16 Build in nb X-stroke (mm) 1500 Additional information Table size 2200 x 2200 mm max. table load 16 ton controlled by a machine with a Heidenhain TNC 426 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 14.000 mm y-travel: 1.500 mm z-travel: 3.000 mm Control: Heidenhain Itnc 530 total power requirement: 50 kW weight of the machine ca.: t dimensions of the machine ca.: m Stocknumber 1110049 Type of machine CNC floortype milling machine Make FPT Type Spirit 130 Build in 2012 Type of control HEIDENHAIN TNC Itnc 530 X-stroke (mm) 14.000 Y-stroke (mm) 1.500 Z-stroke (mm) 3.000 Speeds (Rpm) max. 4.000 Admission in spindlehead Iso 50 Rapid feeds max 25.000 mm/min Additional information Program run 9655 hour The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 3050 mm plate thickness: 53 mm pre-bending: 45 total power requirement: 60 kW weight of the machine ca.: t dimensions of the machine ca.: m Stocknumber 2210020 Type of machine 4-Roll Plate Bending machine Make DAVI Type MCB 3053 Build in 1998 Type of control Conventional Additional information max. Plate widht 3050 mm Max. plate thickness 53 mm Max. thickness prebending 45 mm Toprol diameter 525 mm under roll diam. 470 mm Site rolls diam. 400 mm Power 78 Hp Hardened rolls Conical bending Dimensions: 6000 x 3100 x 6700 mm in very good condition The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Lacfer CR2-E250 rebuilt lathe. Distance between centers: 1.500mm. Swing: 530mm. Swing over carriage: 320mm. Swing in gap: 740mm. 16 speeds. (18-1.600rpm). Main motor power: 10hp. Spindle bore: 60mm. Equipped with universal chuck. Equipped with steady rest. CE certificate for european used machines.

turning diameter: 1120 mm turning length: 6000 mm swing diameter over bed slide: 760 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Brand: Colombo Type: VUP 2S Year of make: 1978 Distance between centers: 6.000 mm Centre height: 560 mm Swing over bed: 1.120 mm ø Swing over support: 760 mm ø 4-Jaw chuck: 1.000 mm ø Digital read-out: Sony Including: 1 x steady rest 520 mm ø 1 x steady rest 950 mm ø 1 x open steady rest Chisel holder Chisel support automatic feed Rapid traverse chisel support Electrically movable counter center Drilling bar: length 2046 mm x 170 mm ø The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

CNC Cutting, Drilling, Nesting, and Milling Capabilities H10 Spidle Head 3-Axis Capabilities Dual Becker Industrial Vacuums Automatic Tool Length Measuring System Low Maintenance Bridge Design w/ Gantry Drive 28 Spot Linear Tool Holder Includes (20) Different Tool Heads 10" and 6" Suction Tubes Dual 24" Control Monitors Label Maker and Printer Includes Auto Voltage Transformer Software License Not Included Specifications Model Year: 2016 Processing Table Size: 146" x 61" Finish Table Size: 152" x 61" Max Motor Power: 10 kW Motor Speed: 24,000 rpm Tool Holder Places: 28 Number of Tool Heads: 20

turning diameter: 800 mm turning length: 1500 mm swing diameter over bed slide: 250 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Next image can not be found: d833 tacchi mt400 (2) Brand: Tacchi Type: MT400 Distance between centers: 1.500 mm Centre height: 400 mm Swing over bed: 800 mm ø Swing over support: 250 mm ø Swing in the gap: 550 mm ø Spindle boring: 130 mm ø 3-Jaw chuck: 390 mm ø Digital read-out Rapid traverse on longitudinal and cross travelling The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 880 mm turning length: 6000 mm swing diameter over bed slide: 540 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Brand: Geminis Type: GE870 Distance between centers: 6.000 mm Centre height: 440 mm Swing over bed: 880 mm ø Swing over support: 540 mm ø Swing in the gap: 1.100 mm ø Spindle boring: 85 mm ø Steadys: 400 mm ø + 600 mm ø 3 jaw chuck Digital read-out The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.