machine center used for sale

x-travel:500 mm y-travel:400 mm z-travel:330 mm control:FANUC 31i B5 tool change unit:21 fach rapid traverse in x-y-z axis:54 m/min taper ISO:BT 30 turning speed range::10.000 1 / min spindle drive:11 / 3,7 kW max. table load:300 kg surface area:600x 400 mm Dimensions (L/W/H):1,6 x 2,1 x 2,25 m rapid traverse:48 m/min total power requirement:11 kVA weight of the machine ca.:2,1 t vertical CNC-milling-drilling machining center, Infrared Touch probe, el. handwheel, autom. door on right side, no internal Coolant Supply, Approx. 65.500 hours "machine on", approx. 8.200 hours "machine run"

x-travel:1.250 mm y-travel:710 mm z-travel:710 mm table surface area:1500 x 800 mm table load capacity:800 kg turning speeds:12000 1/min spindle drive:15 / 10 kW control:MILLPLUS iT HEIDENHAIN spindle taper:SK 40 tool change unit:60 Pos. capacity:44 kVA weight of the machine ca.:10,5 t dimensions of the machine ca.:3,5 x 2,65 x 2,65 m 5 axis simultaneously machining center, B-axis (-120° / +30°), NC-rotary-table integrated in rigid table, direct measuring system, 3D probe infrared, HEIDENHAIN TS 640, internal coolant supply 40 bar, 600l, flushgun, chipconveyor, mode 4, 3D quickset software (no hardware), Higher noise in rush on X-axis and roundtable approx. 48.500 hours "machine on" / approx. 18.000 hours "spindle on"

x-travel:800 mm y-travel:800 mm z-travel:800 mm turning speeds:35-10.000 1/min spindle:37 / 30 kW max. torque on the spindle:525 / 206 Nm Tool bore:BT 50 rapid traverse:60 m/min tool change unit:160 Pos. size of pallet:500 X 500 mm control:MAZATROL 640M Nexus c-axis:0,001° x 360.000 workpiece weight:1.000 kg workpiece height max.:1.000 mm interference area:900 mm 2 pcs. horizontal machining centers (HCN 6000 + HCN 6000-II, 2008), interlinked with pallet pool (16 pallets) MAZAK FMS, 2 pallet changer, chipconveyor, coolant device with internal coolant supply, accessories for both machines: 18 pallets, approx. 300pcs. toolholders, miscellaneous devices for workpiece-clamping...

x-travel:800 mm y-travel:800 mm z-travel:800 mm turning speeds:35-10.000 1/min spindle:37 / 30 kW max. torque on the spindle:525 / 206 Nm Tool bore:BT 50 rapid traverse:60 m/min tool change unit:160 Pos. size of pallet:500 X 500 mm control:MAZATROL 640M Nexus c-axis:0,001° x 360.000 workpiece weight:1.000 kg workpiece height max.:1.000 mm interference area:900 mm 2 pcs. horizontal machining centers (HCN 6000-II + HCN 6000, 2005), interlinked with pallet pool (16 pallets) MAZAK FMS, 2 pallet changer, chipconveyor, coolant device with internal coolant supply,

x-travel:410 mm y-travel:610 mm z-travel:500 mm turning speeds:15000 1/min tool adaptor:SK 40 control:iTNC 530 HEIDENHAIN smart NC table::320 x 320 mm table load:100 kg tool change unit:48 Pos. total power requirement:35 kVA weight of the machine ca.:7,4 t dimensions of the machine ca.:4,15 x 3,8 x 3,28 m 5-axis simultaneously machining center, NC-round-swivelling table, C-axis 360°, B-axis +30/-120°, chipconveyor, 3D touchprobe, internal coolant supply 20bar, el. handwheel, kinematicsopt, meter readings: approx. 9.600h "machine on", approx.3.500h "spindle on"

x-travel:2300 mm y-travel:1200 mm z-travel:600 mm turning speeds:30-10.000 1/min max. torque on the spindle:254 / 159 Nm control:HEIDENHAIN TNC 430 tool taper:SK 40 tool change unit:60 Pos. spindle:40 / 25 kW fixed working table:surface area:1.100 x 1.100 mm rotary table:1.100 x 1.100 mm rapid traverse:30 m/min total power requirement:69 kVA weight of the machine ca.:20 t universal machining center with indexing head (2,5°), NC-rotary table, max. table load 1.500kg, internal coolant supply 30 bar, paper filter, el. handwheel, chipconveyor, automatic doors, flush gun, no touch probe available, approx. 81.400 h main swich on approx. 72.200 h control on approx. 26.700 h program running on machine under power , for functional testing

x-travel:1000 mm y-travel:610 mm z-travel:600 mm table-size:1150 x 600 mm table load capacity:1000 kg rapid traverse X- and Y-axis:24 m/min rapid traverse Z-axis:24 m/min spindle taper::SK 40 spindle turning speed range:10.000 1/min spindle drive:15/22,5 kW tool change unit:30 Pos. CNC-control:SIEMENS 828D operate shopmill distance spindle nose and table:110 / 710 mm weight of the machine ca.:7 t dimensions of the machine ca.:3,2 x 2,2 x 2,7 m vertical machining center, - internal coolant supply 30 bar - chipconveyor - cartridge filter - flat tracks - el. handwheel - prepared for 4th axis - 3D touchprobe RENISHAW OMP 60 - indirect measuring system - accessories (approx. 30 pcs. SK 40 toolholders incl. 2 racks, chip tray) approx. 6.000h "spindle on"

x-travel:800 mm y-travel:700 mm z-travel:600 mm table load capacity:800 kg control:SIEMENS 840D shopmill turning speeds:12.000 1/min tool adaptor:HSK 63 rapid traverse:50 m/min tool change unit:30 Pos. electr. connected load with add. coolant:56 kVA weight of the machine ca.:9,5 t transport measurements machine:4 x 2,5 x 2,75 m 5 Axis simultaneously machining center, Baxis (NC-head) and NC- rotary-swivelling-table dia 900/630mm, internal cooling device 40 bar, 600l prepared for 3D-touchprobe HEIDENHAIN TS 641 (without touchprobe), prepared for el. handwheel (without handwheel), mode 4, approx. 85.000 h mainswich ON , approx. 55.000 h Spindle ON (last spindle change in nJuly 2021 at approx. 50.000h)

x-travel:8500 mm y-travel:2000 mm z-travel:1500 mm rapid travel x/y/z:25 m/min table-size:10.000 x 1.350 mm table load:max. 5 t/qm universal head:orthogonal 1° x 1° tool taper:SK 50 milling head speed:4.000 1/min power capacity:37 kW max. torque on the spindle:900 Nm internal coolant system feed:15 bar control:HEIDENHAIN iTNC 530 Tool changer:60 Pos. total power requirement:75 KW dimensions of the machine ca.:12,7 x 5,2 x 4,6 m weight of the machine ca.:35 t universal travelling column - universal machining center, orthogonal milling head, water-cooled, with 1° indexing in 2 axis (360 pos. in rear layer, 270 pos. in front layer) 3D touch probe M&H 20.41, dividing wall for 2 table machining, internal air blast, 15bar high pressure pump, prepared for HSC milling heads incl. torque support, moveable operator-cabin/panel, chipconveyor, handwheel HR 410, controlled security fence, miscella ...

x-travel:750 mm y-travel:600 mm z-travel:520 mm table surface area:D 700 x 500 mm turning speeds:30000 1/min tool taper:HSK E50 control:HEIDENHAIN iTNC 530 tool change unit:60 pos. rapid traverse:50 m/min table load capacity - central/maximum:350 kg total power requirement:50 kVA weight of the machine ca.:9 t dimensions of the machine ca.:3,2 x 2,65 x 2,8 m 5-axis simultaneously HSC-machining center, NC-round-swivelling table B-axis 180°, C-axis 360°, chip conveyor, prepared for 3D touchprobe HEIDENHAIN TS 641 (without touchprobe), mode 4, spindle chiller, no internal coolant supply, approx. 124.200 hours "machine on", approx. 60.600 hours "spindle on" in total

x-travel:2500 mm y-travel:1000 mm z-travel:750 mm table surface area:3220 x 1000 mm Workpiece weight approx.:3000 kg spindle taper ISO:50 milling spindle turning speeds:20 - 5000 U/min feed speeds:1- 30000 mm/min rapid traverse:30 m/min total power requirement:40 kW dimensions of the machine ca.:6,9 x 4,1 x 3,7 m weight of the machine ca.:21 t with CNC HEIDENHAIN TNC 426 30-pockets autom. toolchanger RENISHAW measuring probe coolant attachment with TSC and chip conveyor diverse toolholders

turning diameter over bed:1000 mm turning diameter over slide rest:745 mm turning length:3000 mm turning speed range:4,5 - 900 U/min spindle bore:110 mm max. workpiece weight between centres:12500 kg total power requirement:30 kW weight of the machine ca.:9 t dimensions of the machine ca.:5,2 x 2,3 x 2 m 3-axes digital readout rapid feed, feed at upper support 350 mm 1 fixed steady face plate diameter 1000 mm coolant attachment

x-travel:600 mm y-travel:580 mm z-travel:580 mm numbers of pallets:2 pallet size::400 x 400 mm max. workpiece weight:400 kg spindle taper ISO:40 spindle speeds::35 - 12000 feed speeds:1 - 50000 mm/min rapid speed:50 m/min total power requirement:25 kW weight of the machine ca.:12 t dimensions of the machine ca.:3,6 x 3,6 x 2,9 m with CNC SEICOS 16 M ( FANUC base ) autom. toolchanger 61-pockets pallet indexing 1° chip conveyor and coolant attachment exhauster clamping cube and diverse toolholders

turning diameter:275 mm turning length:900 mm spindle passage:65 mm power capacity at 100 % load:25/20 kW spindle turning speed range:1 - 5000 U/min spindle diameter in front bearing:110 mm c-axis:1 - 500 U/min. number of workpiece supports:4 tool turret:1 x-axis:290 mm y-axis:165 mm z-axis:360 mm b-axis:360 ° rapid speed:18/30 m/min number of tools:2x2 + 2x2 number of driven tools:2x2 + 2x2 mm toolpiece turning speed range:8000 / 2000 U/min power capacity:25% ED 5,8 kW tool taper:TRAUB 60 tool turret:2/3/4 x-axis:170 mm z-axis:600/950 mm y-axis:+/- 60 mm rapid speed:18/15/30 m/min number of driven tools:10 mm toolpiece turning speed range:1 - 6000 U/min power capacity:25% ED 5,8 kW tool taper:DIN 69880 40 x 63 total power requirement:95 kW weight of the machine ca.:16 t dimensions of the machine ca.:10,0 x 3,5 x 3,0 m with CNC TRAUB TX 8i, Barloader TRAUB Stamag DNH61 / 3000, Main and  ...

turning diameter over bed:570 mm turning diameter over slide rest:365 mm turning length:2000 mm feed per revolution:0,06 - 58 / 0,03 - 28 mm spindle turning speed range:11,2 - 2240 U/min spindle bore:62 mm spindle head:8 nach DIN 55022 total power requirement:15 kW weight of the machine ca.:4,8 t dimensions of the machine ca.:4,5 x 1,5 x 1,4 m with digital readout HEIDENHAIN rapid feed, MULTIFIX toolholder system fixed steady dia. 160 mm 3 jaw chuck RÖHM TR 250 coolant attachment diverse toolholders, diverse jaws

x-travel:2200 mm y-travel:2200 mm z-travel:1400 mm spindle taper ISO:50 spindle diameter in front bearing:110 mm spindle turning speed range:45 - 6000 U/min pallet table size:1000 x 1250 mm pallet worktable capacity:6000 kg feed range:1 - 60000 rapid traverse:60 m/min spindle drive motor:27 kW dimensions of the machine ca.:15 x 8,5 x 5,7 m total power requirement:133 kVA weight of the machine ca.:50 t Machine with SIEMENS 840 D control - full B-axis - palette changer for 3 palettes - tool changer for 244 tools - coolant through spindle - max. workpiece swing 2200 mm

x-travel:1800 mm y-travel:1600 mm z-travel:1400 mm B-axis (table):360° size of pallet:1000 x 1250 mm workpiece swing dia.:2100 mm workpiece weight:3500 kg spindle taper ISO:50 spindle drive motor:37 kW spindle turning speed range:25 - 10000 U/min feed range:40/50 m/min rapid power traverse circular:10 U/min total power requirement:90 kVA weight of the machine ca.:43 t dimensions of the machine ca.:11 x 9 x 4,5 m Machine with SIemens 840 D control for 4 axis - full B-axis - palette changer - tool changer for 150 tools - coolant device with coolant through spindle - chip conveyor

x-travel:630 mm y-travel:630 mm z-travel:630 mm pallet size::400 x 500 mm spindle taper::HSK 63 spindle turning speed - stepless:10 - 16000 U/min total power requirement:55 kW weight of the machine ca.:11 t Machine with SIEMENS 840 D control for 4 axis - digital drives - palette changer 4-fold - tool changer 160-fold - coolant device with coolant through spindle - full B-axis - chip conveyor - hydr. workpiece clamping

turning diameter:445 mm turning length:2000 mm turning diameter over bed slide:660 spindle bore:65 mm spindle speeds::16 - 3150 U/min. rapid motion - x-axis:10 mm/min rapid traverse Z-axis:15 m/min total power requirement:34 kW weight of the machine ca.:7,5 t dimensions of the machine ca.:6 x 2,5 x 2,2 m with CNC Control TX 8 D C-axis driven tooling 14 station turret head 3 jaw chuck dia. 315 mm tailstock, steady as NC-axis diverse driven toolholders diverse turning toolholders chip conveyor and coolant attachment

x-travel:1100 mm y-travel:900 mm z-travel:1250 mm b-axis:360 000 x 0,001 ° milling head speed:1 - 10000 U/min spindle taper: ISO:50 rapid traverse:60 m/min pallet size::630 x 630 total power requirement:37 kW weight of the machine ca.:25 t with CNC control SIEMENS 840 D autom. toolchanger 165 pockets twin pallets 630 x 630 mm max. pallet load 1500 kg through spindle coolant chip conveyor and coolant attachment make KNOLL

turning diameter over bed:1450 mm turning diameter over slide rest:1000 mm turning length:8000 mm spindle bore:160 mm turning speed range:2,8 - 560 U/min bed width:850 mm faceplate diameter max.:1400 mm turning diameter in the gap:1800 mm length of gap:600 mm dimensions of the machine ca.:12 x 2 x 2,5 m with Digital Readout 2 fixed steadies dia 1070 mm chip conveyor

turning diameter over bed:400 mm turning diameter over slide rest:250 mm turning length:1000 mm max swing over gap:520 mm Height of centres:200 mm crossed path:230 mm bed width:218 mm main spindle bore:52 mm spindle size:MK 6 speeds::55-2000 U/min turning angle of tool post:90 grad tail stock:50 mm taper in tailstock:MK 4 threading metric:0,4-7 mm threading WHITWORTH:4-60 TPI total power requirement:2,2 kW dimensions of the machine ca.:1940 x 820 x 1545 mm weight of the machine ca.:750 kg tailstock quill:110 mm tapping modul:0,4-3 mm tapping diametral:8-84 Gang/Zoll

Technical data Note: There was no original machine documentation. To the best of our knowledge, all the following technical data were partially read from the nameplate and taken from publicly accessible online sources. Manufacturer: SW (Swabian Machine Tools) / EMAG Type: BAS 03-12 Year of Make: 2003 Serial number: 182.012 Machine Type: CNC Universal Machining Center Operating voltage: 3/PE AC 400 V / 50 Hz Spindle power: 14.5 kW Rated current: 85 A Connected load: 60 kVA Configuration Double station / multi-sided machining Automatic tool changer Chip conveyor / filter system Full fairing Integrated control cabinet

Technical data Note: There was no original machine documentation. To the best of our knowledge, all the following technical data were partially read from the nameplate and taken from publicly accessible online sources. Manufacturer: SW (Swabian Machine Tools) / EMAG Type: BAS 03-12 SC3 Year of Make: 2007 Serial Number: 1820027 Machine Type: CNC Universal Machining Center Control: Siemens Sinumerik 840D Powerline Operating voltage: 3/PE 400 V, 50 Hz Rated current: 85 A Fuse: 125 A Pneumatic pressure: 6.0 bar Air consumption: approx. 0.3 Nm³ Configuration Siemens CNC control Automatic tool changer Double station / multi-sided machining Chip conveyor Cooling lubricant system Full fairing Control cabinet

Technical data Note: There was no original machine documentation. To the best of our knowledge, all the following technical data were partially read from the nameplate and taken from publicly accessible online sources. Manufacturer: CHIRON Type: FZ 08 B/W Year of Make: 2000 Machine Type: CNC Vertical Machining Center Control: Siemens Sinumerik Operating voltage: 3/N/PE 400 V Frequency: 50/60 Hz Control voltage: 230/24 V Connected load: approx. 21 kVA Rated current: approx. 35 A Configuration Double clamping system / pendulum operation 2 clamping stations NC sub-unit Peiseler AWUP 100 Automatic tool changer Cooling lubricant system Extraction system Full fairing Compact design for series production

Technical data Manufacturer: Hurco Model: VMX40 Machine Type: Vertical CNC Machining Center Year of manufacture: 12/2000 Serial Number: M442-01219120AFC Machine Number: Q-6695 Control: Hurco Ultimax Operating hours: 37,207 h Voltage: 380 V Frequency: 50 Hz Connection: 63 A Configuration Vertical machining center T-slot work table Closed protective cabin Control panel with double screen Emergency stop available Network connection (10BASE-T) Interfaces: Port 1 / Port 2 / Coax Note The technical data was recorded exclusively on the basis of the visible nameplates and components of the machine. There was no additional machine documentation.

Technical data Manufacturer: Hurco Model: VMX24 Machine Type: Vertical CNC Machining Center Year of Make: 2001 Machine number: H20131 Control: Hurco Ultimax Operating hours: 42,221 h Configuration Vertical machining center T-slot work table Closed protective cabin Control panel with double screen Hand control unit (jog handwheel) Emergency stop available Interfaces: Port 1 / Port 2 / Coax / 10BASE-T Note The technical data was recorded exclusively on the basis of the visible nameplates and components of the machine. There was no additional machine documentation.

Control: Siemens 810 Main drive Number of spindles: 1 Spindle speed range: 12000 1/min Tool holder: Sk 40 Movement X-axis movement: 640 mm X-axis feed: 0-40 m/min X-axis feed force: 7000 N X-axis rapid traverse: 60 m/min X-Axis Precision: 0.027 Y-axis movement: 600 mm Y-axis feed: 0-40 m/min Y-axis feed force: 7000 N Y-axis rapid traverse: 40 m/min Y-Axis Precision: 0.024 Z-axis movement: 500 mm Z-axis feed: 0-40 m/min Z-axis feed force: 7000 N Z-axis rapid traverse: 40 m/min Workpiece Workpiece Z: 500 mm Max. table load: 600 kg Work table Tool Changer Available grooves: 30 Max. weight of tools: 7 kg Max. diameter of the tools: 140 mm

CNC - processing center Brand: COMEC Type: MD TOP The ideal CNC solution to process narrow and complicated work pieces EASY with COMEC processing length up to 2.000 mm Head configuration individually customizable for: - saw with 360° - axis - milling unit for horizontal and vertical processing - drilling head with separate jumping spindles vertical and horizontal - multiple spindle drilling heads separate jumping even horizontal - horizontal milling unit with 360° C - axis Special developed clamping table, moves automatically program controlled in X direction Furthermore, optionally available: - Automatic raw work piece feed with finished work piece return to the operator TPA control unit: CNC control with graphical user interface Parametric software with 3D modeling Necessary processing macros customized to you pre-installed

CNC working center Brand: Comec Type: Variax J new machine The highest level of progress for your door frame production: 6 controlled axes and a fast production process characterize the Variax J. Movable machining support - All axes move on ball bearing mounted BOSCH-REXROTH or comparable linear guides - Movement / positioning of the machining units max. 70 m/min. - Axis X = 2950 mm - Axis Y = 400 mm - Axis Z = 500 mm - Axis support for vertical rotation of the machining head. axis B from -135° to +135°, motor kW 0.45. - Axis support for horizontal rotation of the machining head. Axis C from -180° to +180°, motor kW 0.45. Machining head - electrospindle 1-2 - N°1+1 electrospindle fixed to the H support - N°1 electrospindle for milling, - with 2 spindle outputs, kW 7.0 / 12-18.000 rpm, adjustable by means of frequency converter Tool attachment wit ...

Control MITSUBISHI M 700 Bar Passage 37.5 mm 2 x 12-speed revolver with attached revolver Wkz. 2 x C-axis 2 x Y-axis Main/sub-spindle FMB Bar Loading Magazine turbo 3-36 Knoll Coolant Preparation KF 10 Chip conveyor Renishaw Probes Parts catcher Conveyor belt for precast elements Air filter 2 x Collet Chuck Tool holders and collets

\" Lot of centering drills / drills from workshop stock. Marking / Contents: • Quantity: 36 pieces • Mixed versions: • Center drill / combination drill • Various diameters and lengths Weight • Net weight: 14 kg \" Auction-ID: A7-46417-192

-Flexible CNC plate machining center -The machine consists of two processing units (top, bottom) -Equipped with a total of 82 individually retrievable tools -The skipper is able to process two workpieces at the same time from above and below -Dimensions according to data sheet -Work and pressure table -Side work tables -Stop system -Electronic control of workpiece thickness -Digital drives -Central lubrication -Control -Automatic discharge with belt -Air cushion table -Bottom processing unit-Left slot -Upper processing unit-Left slot -Bottom processing unit-Right slot -Upper processing unit-Right slot -Horizontal glue dowel insertion unit for dowels with 8 mm diameter -Surveying system - NC-HOPS programming system -Version with left-hand automatic feed feed -Horizontal drilling and milling Auction-ID: A7-46409-13

\" (2x) Centering angle 300 mm – Precision marking angle Centering angle with 300 mm leg length for the exact determination of centers on round workpieces (e.g. shafts, tubes, discs). • Design: Centering angle • Length: 300 mm • Condition: new / unused • Accessories: protective bag • Marking: Centering angle 300 mm / 301-73 • Material: Metal, precisely manufactured • Application: Centering, scribing, testing \" Auction-ID: A7-46417-256

\" Lot of centering drills / drills from workshop stock. Manufacturer / Identification: • WERKÖ • Mixed Lot Center Drill / Combination Drill • Various: • Diameters • Lengths • Tip geometries Weight • Net weight: 16 kg \" Auction-ID: A7-46417-190

Tool holders and clamping adapters for BAZ special tool holders and clamping adapters for machining centres of the STAMA-MC series (including MC 440). Stock: Mixed lot with approx. several tool holders, chucks, reducers and spindle adapters. Typical designs include: STAMA special adapter with bayonet/form-fit contour Chuck with slotted clamping heads Reduction adapter for STAMA unit interfaces Mounting elements for special tools Tool carrier with STAMA logo and part numbers (including 150 864 / 150 865) Auction-ID: A7-46417-30

TIG Welding Machine, Electric Welding Machine KESTRA Type TIG 350 AC/DCE Welding MachineFabr. No. 09720693 Year of construction approx. 1985Power 350 Amp. = 60 % EDExsetting range 3 steps and fine adjustmentCurrent type AC / DCNet connection 400 volts, 50 Hz, 32 Amp. Plug- 4 meter hose package with TIG torch- 2 stroke / 4 stroke welding device- Water-cooled- Gas pressure reducing valveSpace requirement L x W x H 1050 x 560 x 900 mmWeight 250 kgThe welding test gives good results when welding stainless steel with

TIG welding machine, electric welding machine DALEX type TGKW 55 (AC-DC)Series No. 532521 year of construction approx. 1975Power 225 Amp. = 60 % ED 125 Amp. = 100 % EDEsetting range 2.8 to 225 ampereCurrent type direct current and alternating current (AC-DC)Mains connection 380 volts, 50 Hz- Power setting via 5 coarse steps and fine adjustment via rotary potentiometer infinitely variable- 2-stroke and 4-stroke welding device- Remote controller with rotary potentiometer for fine adjustment- Digital display for ampere- TIG hose package 4 meters- Welding gas pressure reducing valve-

Specifications / Technical Data S-1000 CNC-Fraese and Engraving Machine The almost largest CNC machine in the High-Z series. With an external dimension of approx. 1350 x 800mm still handy enough and extremely powerful. With the High-Z CNC unit, they acquire an all-round talent in TUeV-certified quality (EMC). Whether you want to clamp complex parts on a groove table or, or to clamp factory tins into a high vice (the machine is on a frame construction, is driven in X via 2 motors and thus allows to be placed completely over a part to be machined). or simply want to do engraving or drilling then they simply work on a flat base, on which they then attach e.g. an MDF plate, which they once overfrave plan and are then able to work up to approx. +-0.02mm exactly in depth. All CNC portal fraes machines are supplied with coloured energy chains on all axes due to the improved cable guid ...

Carrier bag machine / SOS block bottom bag machine with flat inside handle unit Bag width: 14-32cm Tube length: 35-70cm Bottom width: 6-20cm Reel width: 107cm max Hot Melt unit for handles Web guide system for handles Foto cell unit for preprinted paper Aprox 7 former plates Option: 4 colour tail end printer (ref. S294)

Motor power: 1,5 kW. Max. mortise width: 180 mm. Max. mortise depth: 180 mm. Chain width: 2x10 mm. Machine dimensions: 600x950x1900 mm. Weight: ~200 kg.

A good sample preparation in metallography (materialography) starts at the correct separation with a wett cutting machine. Good and proper separation prevents the burning and destruction of the material change in its structure and is the best way to save time and consumables. The separation is performed incorrectly is this very elaborate grinding and polishing extremely high overhead "punished"! Wet cutting machine cutting. Wet abrasive cutting | Separating SCHNEIDER METACUT 251 The head of the cutting grinding machine with built-in blade is lowered by a hand lever on the sample. METACUT 251 separating cutters are available exclusively in manual versions. This is usually not a disadvantage: the specimen geometry changes / separation task all the time, so can hinder the establishment of an automatic cut-off grinder. The workpiece is clamped at METACUT 251 - cut-off machines and the de ...

FORCIPOL - the quality grinding machine / polishing machine for metalography that is cheap on the market - from the simple grinding machine for manual preparation to the semi-automatic machine - The FORCIPOL series is modular and can be assembled as required FORCIPOL 102: Basic grinding machine / polishing machine with a grinding wheel 250 mm and basic control FORCIPOL 202: as before, but 2 grinding wheels 250 mm For rationalization and reproducible cuts (can be combined with FORCIPOL 102 or 202): FORCIMAT 52: Sample wineer head with simple control FORCIMAT 102: Sample winer head with programmable control For the supply of lubricants and suspensions (only IN the case of FORCIMAT 52 / 102) DOSIMAT 12 - Lubricant Dosing Device DOSIMAT 52 - Lubricant and suspension dispenser (adjust integrated internal control on the device) DOSIMAT 102 - Lubricant and suspension dispenser  ...

Copying fraes machine Kuhlmann Type GM 1-2 Machine in very good condition. Optional: very extensive access at an additional cost Zubehoer s/he/sheers, milling spindles, sub-machines for circular copying, written fonts, fraesstichel with quick-change device, copy spin, Radient template for radii in 0.5mm rising, clamping devices, Stencils and much more! Special price Tool cabinets milling spindle spindle grasses engraving fonts brass copper table

Kettenstemmer GF L x W x H: 120 x 70 x 270 cm Weight 570 kg Baeqvhtqms Year of construction 1983 The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Pot discs - diameter:175 mm spindle extension:180 mm operating voltage:400 V Machine weight approx.:300 kg room requirements approx.:0.90 x 0.60 x 1.80 m

La San Marco NEW 105 MULTIBOILER 2G portafilter machine Original price 8.800 ,- € In the NEW 105 Multiboiler series, the latest technology from La San Marco has been applied. Multiboiler technology allows precise temperature control for each boiler of each individual group. The temperature is set in a simple and intuitive way on the keyboard of each group. The boiler for steam and hot water has an electronic automatic temperature adjustment, which can be easily adjusted using the touchscreen keyboard. The innovative keyboard with touchscreen technology is complemented by a graphic RGB display. Setup and program advice is simple and intuitive, and the display also provides a range of information that is of great benefit to the operator. The illumination of the workstation with customizable multicolor LED makes the machine even more ergonomic with an eye on aesthetics. Grou ...

Carrier bag machine, SOS block bottom bag machine with flat inside handle unit Photo cell 4 colour tail end printer Bottom patch Bag with handles: Bag width: 20-32 cm Tube length: 33-66 cm Bottom width: 7-18 cm Bag without handles: Bag width: 16-32 cm Tube length: 24-90 cm Bottom width: 7-18 cm

Combi with 11.1.073 Novopac Shrink tunnel Remaining: 3 parts Chassis number: 4395905 Weight: 1,0 tons Power: 4 kW Air pressure: 7 bar L x w x h first part: 2600 x 1700 x 2000 L x w x h second part: 3200 x 2400 x 1700 L x w x h third part: 1775 x 3300 x 1500 Working height: 85 cm. Transport size L x W x H: 2,6 x 1,7 x 2,0 + 3,2 x 2,4 x 1,7 + 1,775 x 3,3 x 1,5 Min.-max. glass thickness: Max 300 mm Min.-max glass size: Max 1460 mm width Condition machine : Repaired after malfunction Control type: Automatic Electric. Connection: 400V Documentation: Available Instructions: Available Electric diagram: Available Parts list: No Remaining: Combi with no. 23073 Photos/film available: Photo's available