134,078 used machines on RESALE, but how to find them? Machine Search
Machine Details Warehouse number 1105-03636 Machine Type Machining Center - Vertical Make DECKEL MAHO Type DMC 63 V Year of construction 2000 Control type CNC Control heidenhain tnc 426 Storage location FRANCE Country of origin Germany Delivery time IMMEDIATELY Freight base EX WORK Technical details x-travel 630 mm y-travel 500 mm z-travel 500 mm Table size 800 x 500 mm Spindle holder ISO SK 40 Speed range 0 - 8,000 1/min Feeds - longitudinal/transverse/vertical 1 - 30000 mm/min Rapid traverses - longitudinal/transverse/vertical 30 m/min Number of tool magazine slots 24 Tool diameter with full assembly 80 mm Tool diameter with 2 free spaces 140 mm Tool length max. 300 mm Tool weight max. 7 kg Table load 500 kg Spindle motor 9 / 11 kW Control heidenhain tnc 426 Total power requirement 30 kVA Machine weight approx. 4.5 t Information heidenhain tnc 426 El. ...
Arburg 420C-1300-675 (167) Item number: 167 Availability: In stock Year of construction: 2000 Brand: Arburg Specifications Spray weight: 297 g Clamping force: 1,300 kN Screw diameter: 50 mm Spray pressure: 2080 bar Spar spacing: 420 x 420 mm Clamping plate size: 615 x 615 mm Tool installation height min.: 350 mm Control: Selogica Language: German Power: 44.9 kW Operating hours: 84840 h Weight: 4330 kg Dimensions: 4.9 x 1.8 m Funnel: No Core train: Yes Air valve: Yes
forklift available Auction-ID: A1-41995-77
Spiral kneader Diosna SP 120 D Spiral kneading dough kneader from Diosna SP 120 D with solid stainless steel boiler for a maximum of 120 kg of dough.Kneading process over time with 2 timers, with automatic switching and shutdown.Trade-in and delivery on request. Type: SP 120 D mobile for max. 75kg flour or for max. 120kg dough with 2 automatic timers Spiral and boiler made of stainless material Boiler diameter 75cm Boiler capacity approx. 180 litres Machine can be driven on castors with a swivel castor Locking by 2 locks with plastic flour dust cover Stainless steel spiral and boiler 400 Volt frequency 50 Hz Weight of the machine approx. 550 kg Condition "good"
Control panel Pacmation made of Uhlmann C130 YOC 1996
Decorker, Fabr. Rink, Type: KM 670/2K as box uncorker, 2-head, 2,000 K/h, clock machine Running direction: li->re with decorker plate for 24 module box 0.33 lt, box longitudinal run attached control cabinet in VA with Siemens S7-300 control and operating module OP-Siemens
Equipped with: adjustable tow bar Auction-ID: A1-40137-159
Year of construction: 2008 Auction-ID: A1-41995-93
A deposit of €3000.00 is required in order to submit a bid on this lot. To receive the bank details necessary for the transfer, please contact the auction representative at alessandro.icardi@surplex.com. ATTENTION: The lot includes the following works that must be carried out in this time order no later than 30 days from the award. The total removal of the goods and correct disposal of the remaining NON-FERROUS materials after removal. The complete floor cleaning of the respective indoor and outdoor area. Access to the site will be allowed only after the delivery of all the documentation necessary for safety on site, according to the regulations in force and the specific provisions of the seller. Liability insurance is required for any damages. Surplex will monitor the progress of the work to ensure that the deadlines are met. An advance payment will be required for surveill ...
ORDER NO. 6575 TECHNICAL DATA - max width of the workpiece 230mm - max height of the workpiece 170mm - 7 spindles: 1) horizontal bottom 230mm, 11kW 2) vertical right 170mm 3) vertical left 170mm (2 and 3 spindle), 11kW 4) horizontal right 170mm, 5.5kW 5) horizontal upper 230mm, 11kW 6) horizontal bottom 230mm, 7.5kW 7) universal 230mm, adjustable at 360°, 7.5kW - all spindles adjustable up/down, right/left - spindle 3 and 5 electrically adjustable - ATS - spindle diameter 40mm - electric brakes - from above 4 pulling introductory shafts, toothed including 1 double - from above the introductory roller pulling rubber double - from above the shaft leading out, pulling, rubber, double - from below 2 metal rollers, pulling, smooth - pulling roller, rubber, double - feed on cardan rollers - pneumatically pressed shafts - smooth adjustment of the feed spe ...
Handy edge milling machine 230V. Scope of delivery as shown. Edge milling up to 7mm, round edge milling up to R3mm. Angle adjustable. HM plates rotatable and replaceable. This new machine comes from a warehouse clean-up. Scope of delivery incl. chip catcher (not shown here).
COLOMBO lathe, H points 800x1500, hydraulic tailstock, displayed.
Includes cabinet with tools Auction-ID: A1-41995-152
Arburg 470C-1500-350(166) General information Item number: 166 Availability: In stock Year of construction: 2003 Brand: Arburg Specifications Spray weight: 210 g Clamping force: 1,500 kN Screw diameter: 45 mm Spray pressure: 1670 bar Spar spacing: 470x470 mm Clamping plate size: 650x650 mm Tool installation height min.: 250 mm Control: Selogica Language: German Power: 40.2 kW Operating hours: 83824 h Weight: 4410 kg Dimensions: 4.5 x 1.8 m Funnel: No Core train: Yes Euromap: Yes Air valve: Yes
Gathering machine Bourg BST-10 2 Towers Stitching Folds Cutting
Make OKUMA WITH A NEW SPINDEL IN 2019 - RUNS ONLY 6 MONTHS AFTER WAS CHANGED MOTOR AND SPINDLE type MX 45 VAE Year of manufacture 2001/3 CONTROLS: OSP - U100M Technical Details x-way 762 mm y-way 460 mm z-way 450 mm total power requirement 35 kW machine weight approx. 5000 KG Type: MX - 45 VAE Control: OSP - U100M working range: Axis X: 762 mm Axis Y: 460 mm axis Z: 455 mm Spindle speed range: 50 - 7 000 rpm VARIABLE SPEEDS ATC: TOOL BT 40 TOOL MAGAZINE 20 TOOLS tool magazine: 20 pcs. Total power requirement: 35 kVA LAST SERVIS ON SPINDLE ON 2019 - ( BRAND - NEW SPINDLE) COST OF SERVICE OWER 35000 EUR , MACHINE WAS WORKING FROM THAT TIME ONLY HALF YEAR. WE ORGANIZE FOR CLIENT AS WELL TRANSPO
WELIDING WORK STATION SCHLATTER WITH NEW MIYACHI WELDING CONTROLS. 1. 56 kWA - SERIAL NR: PS1/3111/9955 - MIYACHI DIGITAL CONTROLS 2. 80 kWA - SERIAL NR: PS1/9231/9956 - ORIGINAL SCHLATTER ANALOG CONTROLS - CONNECTION: 380V/50Hz - WELDING NOMINAL POWER - 56 kWA AT 50% - S MAX: 135 kWA - Arm distance min /max : 218/468 in mm - THROAT IN 450mm - CLOSING FORCE: 4KN - COOLING WATER REQUIREMENT: 6 liter / min 2. AWAILIBLE 1. 56 kWA - SERIAL NR: PS1/3111/9955 - MIYACHI DIGITAL CONTROLS 2. 80 kWA - SERIAL NR: PS1/9231/9956 - ORIGINAL SCHLATTER ANALOG CONTROLS included with safety glass and two button pust operational system. with all safety system integrated and working table.
1 Wire bending machine OMCG date 1997 technical status good , soft ware to be refurbished 2.Tube bending machine OMCG date 1998 technical status good, software to be refurbished
MOSCOW 582 thread grinding machine was manufactured in the USSR. Technical data of MOSCOW 582 thread grinding machine - grinding diameter: 250 mm - grinding length: 500 mm - tooling (divider, fang, changewheels) - dimensions: 260 x 220 cm
SAHINLER HKM 115 hydraulic ironworker machine was built in Turkey by Şahinler Metal Makina Endüstri A.Ş. It is an extremely versatile machine designed for complex machining of structural steel (S235 / S355). It is capable of performing processes such as precise hole and corner punching, as well as shearing flat bars, angle bars and bars. All these operations are performed at 5 individual workstations. Each station is controlled by two hydraulic cylinders and separate foot switch controllers. The use of this solution enables independent or parallel operation of the machine by two operators at two stations simultaneously. The stroke of each cylinder is adjustable in order to increase productivity. All of this makes the offered HKM 115 ironworker machine the perfect solution for increasing production efficiency in production facilities and locksmith workshops. The total weight of the mac ...
Arburg 470S-1300-350 (170) Hybrid with electric worm drive, without funnel General information Item number: 170 Availability: In stock Year of construction: 2005 Brand: Arburg Specifications Spray weight: 127 g Clamping force: 1,300 kN Screw diameter: 35 mm Spray pressure: 2500 bar Spar spacing: 470 x 470 mm Clamping plate size: 650 x 650 mm Tool installation height min.: 275 mm Control: Selogica Language: German Power: 33.9 kW Operating hours: 85,400 h Weight: 5,100 kg Dimensions: 5 x 1.8 m Funnel: No Core train: Yes Euromap: Yes Air valve: Yes
Catalog No. : 5889 Type: VU 2313 Producer: TRIMILL Made in: 2010 Characteristic: Control system: HEIDENHAIN iTNC 530 Table dimensions: 1800x1800 mm Maximum table load: 18000 kg Number of axes: 5 pcs Total hours: 68.648 h Hours on: 41.293 h Travel length X-axis: 2300 mm Travel length Y-axis: 1300 mm Travel length Z-axis: 1000 mm Number of tools in the magazine: 10 pcs Max. pindle speed: 10000 1/min Max. Tool diameter: 110 mm Max. tool lenght: 450 mm Max. tool weight: 12 kg Power of the spindle: 25 kW Tool clamping: HSK-A 100 Weight: 38000 kg Equipment: Turntable Milling head Chip convoyer 2x Probe HEIDENHAIN and BLUM
Press (n°1) Upstroking Manufacturer: Agila Closing force: 850 Ton Year 1997 hydraulic Steam Platens : 3 2 cavities (250 mm opening) Size heating platens: 1100 x 1400 x 76 mm Diam. piston 650 mm Hydraulic pressure: max. 250 BAR Hydraulic tank: 500 L Complete manual included Size press 2400 x 1400 x 4200 mm (LWH) Weight +/- 23.000 kg
MUBEA PROFI 500 hydraulic ironworker machine was built in Germany by Muhr und Bender Maschinenbau GmbH (Mubea). The machine, designed for complex machining of steel workpieces, is equipped with 4 individual workstations. They are capable of performing such processes as precise hole punching, as well as shearing flat bars, angle bars and bars. Each station is hydraulically controlled. The extremely robust design of the machine additionally ensures maximum process stability during even the most intensive challenges. All of this makes the offered Muhr & Bender PROFI 500 ironworker machine the perfect choice for increasing production efficiency in industrial facilities and locksmith workshops. Technical specifications of the MUBEA PROFI 500 ironworker machine General data - maximum press force: 50 t (500 kN) - number of workstations on the Muhr und Bender PROFI 500 machine: 4 Flat b ...
Bottle washer PAC / Switzerland Type CB 12 Eind 8,000 fl./h 0.25 to 0.50 L glass bottle Year of construction 1997 FILM AVAILABLE - PLEASE REQUEST Further information and price on request
Niemeyer shaft base paver for lower parts 1100 mm incl. many accessories such as moulds, base sleeves, rotating device, spare parts, from location, immediately available
PEDDINGHAUS Hydraulic 800 hydraulic punching machine was manufactured in Germany by Paul Ferdinand Peddinghaus GmbH. This highly reliable machine is used for the precision machining of angle bars and flat bars. It enables the punching of square and round holes in structural steel workpieces with a maximum thickness of 25 mm. The machining process is performed with a high press force of up to 80 tonnes by means of punches. The perfectly balanced design of the machine maintains excellent stability even during the most intensive challenges. All of this makes the PEDDINGHAUS Hydraulic 800 an excellent addition to industrial facilities and locksmith workshops. The total weight of the machine is approximately 1500 kg. Technical specifications of the PEDDINGHAUS Hydraulic 800 punching machine General data - maximum press force: 80 t (800 kN) - throat depth: approx. 200 mm - working heigh ...
Code: 0383 Brand: DUE B.ERRE STEMA - ITALY Model: SPINAMATIC GLF HP - CE Standard Machine for applying thick glue and dowels with pneumatic gun for panels, for doors, windows and various - CE Standard Technical data Max insertion capacity 60 dowels per minute Dowel diameter mm 10/12 mm Dowel length mm 25 to 50 mm Max insertion depth 30 mm Machine works with one diameter of dowels at a time Electronic dosing of glue quantity Washing system Flexible arm provided with counterweight that makes the gun lighter during the work cycle (gun weight approx 3 kg) Recommended adhesive type: Water-based emulsion adhesive - Viscosity Brookfield 580 mPa.s - Solids content 30% - Min film formation temperature 3–5 °C - Cleaning with water Wheels on base Voltage 220 V single-phase Max pressure 6 atm Overall dimensions mm 600 x 1000 x 2100 h Weight kg 130
Henke brick system for DF bricks, with complete circulation, palletizer, strapping, lifting and lowering ladder, trolley, hardening chamber, 2000 boards as new, approx. 10 shapes, armor plate tape, etc. fully functional, immediately available from location
General description Mixed lot of original Frech die-casting machine shot-end spare parts, including nozzles, pistons, and adapters. Designed for zinc die-casting machines (Frech DAW/DAK series) and critical for molten metal injection systems. Technical details Type: Die-casting shot-end components Manufacturer: Frech (OEM parts) Components include: - Nozzle tips (Düsenspitze), marked D7.5, D10 - Shot pistons / plunger heads (e.g. Gießkolben D60 DAVII100-125) - Threaded adapters, holders, and sleeves Material: Hardened steel (precision machined) Configuration: Conical threaded and cylindrical components Application: Molten metal injection (zinc die casting) Compatibility: Frech DAW / DAK series machines Quantity: Approx. 30–60 pieces (mixed sizes and types) Packaging: Compartment trays and original OEM boxes labeled Ersatzteil” Equipment - Shot-end nozzles - Pl ...
I sell a tenon machine for parallel milling, grooves for pallet tape etc. WACO T2-SL Year of construction 1984. Groove width 30mm. Motor 3,3kW Made in Germany. Available the same. With dokumentazion.
Specifications: Drill diameter: 3 - 32 mm Center angle: 90° - 140° Speed grinding wheel: 4800 1/min Connection: 230 V Motor power: 0.25 kW Weight, approx.: 32 kg Dimensions LxWxH, approx.: 360 x 250 x 310 mm Characteristics: - Ideal for grinding HSS/carbide twist drills - Easy to use - Safe operation due to forced grinding process - Peak angle adjustable from 90° - 140° - Compact design, with collet storage in the machine and handle for quick storage - Including spout alignment for flawless centering of the drill on the workpiece and to reduce the feed force during drilling - Device for back grinding the drill edges to reduce friction between drill and workpiece - Rotor with precision ball bearing - Vibration-free running due to high dead weight - CE Scope of delivery: - Grinding wheel CBN - 30 ER collets ER 40, 13 - 32 mm (suitable for intermediate sizes) - ...
Bearing number: 3694 HONING MACHINE Manufacturer: PLEIGER, Type: B - 290 Year of construction: 2002 Specifications: honing length 10000 mm workpiece size dia. 355 mm Min. Max. Honing Dia. 290 mm Length: 27,000 mm, Høhe: 10,000, Width: 2,000 mm, Weight: 30,000 Kg
Specifications: Drill diameter: 3 - 20 mm Center angle: 90° - 140° Speed: 4800 1/min Connection: 230 V Motor power: 0.12kW Weight, approx.: 8.6 kg Dimensions, approx.: 290 x 150 x 180 cm Characteristics: - Ideal for grinding HSS/carbide twist drills - Safe operation due to forced grinding process - Peak angle adjustable from 90° - 140° - Compact design, with collet storage in the machine and handle for quick storage - Including propping alignment to reduce feed force - Device for back grinding the drill edges to reduce friction between drill and workpiece - Rotor with precision ball bearing - CE Scope of delivery: - Grinding wheel CBN - 11 collets ER 20, 3 - 13 mm - 7 collets ER 24, 4 - 20 mm - Collet holder ER 20, ER 25
Key data: 1000 , 89 , 30
In our stock in Wellingborough, Northamptonshire is this fully refurbished Arburg 420C 1000 – 250 VU injection moulding machine with vertical clamp and injection. Ideal for insert moulding as an operator can easily and ergonomically load inserts. The vertical clamp means inserts are more likely to stay in place. This machine has a 30mm plasticising unit which gives a maximum shot weight of 89 (PS) (g). As you’d expect from us, this machine has been fully refurbished and is now completely fault & leak free. With low lifetime hours of only 23k, it really is in excellent condition throughout. The plasticising unit is holding max pressure throughout the range, the pump is quiet, the platens are in great order and we’ve done great work with the general cosmetics. Machine is now available for a full demonstration as and when required. Refurbished machines from STV Machinery undergo a ...
Janssen Pastry Moulding Machine Type: FM128 K4 with 1x speculoos roller Extra rollers available at extra cost Band width: 23.5cm with heating Height: 145cm Width: 80cm Depth: 50cm
Treif bread slicer Type: Discus 400 Circular knife digital control Year of construction 2010 Cutting width: 4 – 20mm with storage compartment 400V 50Hz Weight approx. 200kg Height: 110cm Width: 82cm Depth: 72cm
Pastry moulding machine Type: Kalmeijer KGM with 2 forming rollers (speculoos + . ) thickness of the dough figures is adjustable Dough hopper, forming roller, dough feed roller is easily removable for cleaning Easy to use The trasnport belts for the sheets can be folded in and out Machine requires little space The machine is in need of overhaul Dimensions: Height: 122cm Width: 170cm Depth: 52cm
Viewing by appointment Auction-ID: A1-40377-41
maximum number of results exceeded
please refine your search
250 € 
