machi used for sale

This 4-axis Okuma MA-600HB was manufactured in 2006. It features a maximum spindle speed of 12,000 RPM and a BT50 tool holder. The machine is equipped with a coolant system in the spindle at 30 bar and includes a Renishaw MP10 for tool measurement. If you are looking to get high-quality machining capabilities, consider the Okuma MA-600HB horizontal machining centre we have for sale. Contact us for further details.

Pallet feeder FP 120 Navigator control 6 folding pockets in the parallel fold section 2 folding knives in the cross fold section 1 additional folding pocket after the 1st cross fold Window cassette Crossfold section can be lifted up for servicing rollers Pocket rollers can be pulled aside for servicing Noise absorbing hood Rollers in good condition Without delivery Included: MBO FW II-560/4 Second unit (variable) width 56 cm Station: 4 folding pockets 56 cm following knife shaft noise absorbing hood

This 4-axis Okuma MA-600HB was manufactured in 2007. It features a maximum spindle speed of 6000 RPM and a robust tool capacity of 150 tools in the automatic tool changer. The machine is equipped with a 30 bar coolant system and includes advanced features such as tool breakage control and DNC DT. If you are looking to get high-quality machining capabilities, consider the Okuma MA-600HB horizontal machining centre we have for sale. Contact us for further details.

REF-2261 AUTOMATIC CAN SEAMER SOMME NORA-313-VAC WITH VACUUM FILLING MACHINE 6 VALVES Automatic tin can seaming machine with 6-valve filling system Manufacturer: SOMME Model: NORA-313-VAC Can size: 3kg Output: 3,000 cans/ hour Vacuum pump dimensions: width 1,000mm, length 1,300mm, height 1,800mm Overall dimensions: width (including infeed belt) 3,600mm, length 1,900mm, height 2,000mm

FQJ-1800 honeycomb board cutting machine was built in 2019 in China by SAN (QINGDAO) INTERNATIONAL TRADE CO., LTD. The machine is designed for cutting strips of honeycomb cardboard with a maximum thickness of 80 mm. The high cutting accuracy ensures repeatable dimensions of the elements, thus reducing material waste and increasing the efficiency of the production process. Honeycomb board is characterised by high rigidity, low weight and resistance to compression. Thanks to these properties, it is used as a filling material for interior doors, as well as a protective material for goods during transport. The FQJ-1800 is equipped with three blades that provide a clean, even cutting without damaging the characteristic structure of the material. The adjustable cutting speed from 0 to 50 m/min enables the operating parameters to be adapted to the type of honeycomb board being cut, ensuring  ...

I sell radius copy milling unit for edges suitable for CNC machining center machines with edge banding HOMAG, WEEKE, BIESSE, SCM, MORBIDELLI, HOLZ-HER, IMA, FELDER, MASTERWOOD, BUSELLATO, etc. n 12,000 rpm. Radius R2mm. HSK63 posture. Available the same.

Ref.-No. 10010-21-1339 Portable Laser Name of the system Compact ALL-in-one system component for laser processing Portable Marking Laser Manufacturer SH-Germany Model SAL 23 Year of construction NEW Compact ALL-in-one system component for laser processing • Fiber laser 20W (Optional: 30W, 50W) • Laser class 4 • Wavelength 1064nm • Marking field size 110x110mm • Marking software EZCAD • Electrically adjustable Z-axis (working plane adjustment) • Welded construction made of sheet steel • Connection 230V • Air-cooled • Touch IPC with Windows 10 operating system • Keyboard • Dimensions: 1150 x 500x 1500mm (DxWxH) • Weight: approx. 85 Kg • Weight of the portable laser unit 6.8 Kg • Smoke extraction included

I sell a combined pin cutting machine with drill head BALESTRINI I2F 1 swivel table with pneumatic material pressure. Automatic cutting saw from below. Milling head for pin or finger joint production. Drill head for dubel drilling production 3 spindle. Feed automatically. End sensors positioning. Available the same.

AGIE AGIETRON HYPERSPARK 2 HS die-sinking EDM machine was built in 2008 in Switzerland by AGIE SA. The machine is designed for the production of precision dies, punching dies, punches and other elements with complex geometry using the electrical erosion. This technology enables the machining of workpieces made from difficult-to-machine and hardened materials, and also reduces or completely eliminates the need for further finishing operations, such as polishing. Electrical discharge machining is performed in a tank filled with a dielectric fluid, which affects the surface quality and dimensional accuracy of the machined workpieces. All process parameters are entered in an intuitive CNC controller, which facilitates the daily operation of the machine. The AGIE AGIETRON HYPERSPARK 2 HS sinker EDM is offered with tooling. The total weight of the EDM machine is 2800 kg. Technical specifica ...

I sell an Angular drill with hanging insert suitable for tur production. MARZANI MACCHINE CHEAP WORK Year of construction: 1993 Number of drilling spindle 1 (drill head fully -7 to +90° adjustable) Number of insert heads 1 (magazine suitable for turret hanging) Insert head mechanical, screw insert Very good condition. Available the same.

Manufacturer: RAS Model: MiniBend Center 79.05 Year of manufacture: 2020 Type of Machine : Bending Center Included: robot KUKA KR16-2, spare parts and tools Find more here - .ucymachines/ Contact us at - sales@ucymachines

Horizontal turning machine manufactured in 1997. This BOEHRINGER VDF 315 CM features a maximum turning length of 2,049 mm and a chuck diameter of 400 mm. It is equipped with live tools for enhanced versatility. If you are looking to get high-quality turning capabilities, consider the BOEHRINGER VDF 315 CM machine we have for sale. Contact us for further details.

Horizontal turning machine manufactured in 1997. This BOEHRINGER VDF 400 CM features a maximum chuck diameter of 500 mm, an X-axis travel of 620 mm, and a Z-axis travel of 2000 mm. It is equipped with a live tool for enhanced functionality. If you are looking to get high-quality turning capabilities, consider the BOEHRINGER VDF 400 CM machine we have for sale. Contact us for further details.

Vertical turning machine manufactured in 2008. This HONOR SEIKI VL 46 AR features a maximum turning diameter of 460 mm and a turning height of 400 mm. It is equipped with a chuck diameter of 300 mm or 380 mm and a spindle speed of up to 3000 rpm. If you are looking to get high-quality turning capabilities, consider the HONOR SEIKI VL 46 AR machine we have for sale. Contact us for further details regarding this machine.

Ref.-No. 10013-21-1337 Marking laser SAL 27 Name of the attachment marking laser SAL 27 Manufacturer S-Germany Model SAL 27 Year of construction of new goods The SAL 27 in a flexible allroud talent. Thanks to the three different, manually adjustable axes, inscriptions from small to very large parts up to a height of over one meter can be easily realized. With the swivel axis, the laser head can be positioned in the most difficult places. The SAL 27 is mobile and can be easily rolled onto the workpiece. Product • Fiber laser 30W (optional 50W) • Laser class 4 • Wavelength 1064nm • Marking field size standard 110 x 110mm (optional 150 x 150mm) • Y-axis from 1020 - 1320mm, travel max. component height 1120mm X-axis approx. 250mm travel • Pilot laser (easy preview) • Focus finder (easy focus adjustment) • manually adjustable Z-axis • Touch PC with la ...

Ref.-No. 10017 – No. 21-1417 Described Open Laser System Manufacturer SH-Germany Type LAS 26 Year of construction New LAS 26 The LAS 26 is an open laser system with which small parts and also large, bulky parts can be lasered. Due to the lack of limitation of an enclosure, the dimensions of the workpiece are variable. It is possible to integrate this laser system into an existing system. Product • Fiber laser 20 W (optional: 30 W, 50 W) • Laser class 4 • Marking field size 150 x150 mm • Marking software EZCAD • Pilot laser (easy preview) • Focus finder (easy focus adjustment) • Marking height approx. 330 mm • Electrically adjustable Z-axis (Working Plane setting) • Connection 230 V • Air-cooled • Laptop with Win 10 • Dimensions: approx. 840 x 775 x 700 mm (L x W x H) • Weight: approx. 45 kg

NEAGARI SHIBUYA Radial Forging Machine Model BF-350 New 2010 Specifications 1. Machine components (1) Bar-Forging Machine: 1 set (2) Manipulator: 2 set (3) Hydraulic System: 1 set (4) Electric Power & Control System: 1 set (5) Foundation: 1 set (6) Unloader: 1 set (7) Work Support: 6 set (8) Work Support (center): 2 set (9) Mandrel (IN): 1 set (10) Mandrel (OUT): 1 set (12) Die Changing Unit: 1 set 2. Work Piece 2-1. Material (1) Tool Steel (EX. DIN-X40CrMoV51AISI-H13JIS-SKD) (2) C-steel 2-2. Starting Dimension (1) Round: max. diameter 450mm (2) Square: max. flat to flat 240mm (3) Max. Length: 3500mm (4) Max. Weight: 3000kg 2-3).Forged Dimension (1) Min. Diameter: 80mm (2) Min. Square: 120mm (3) Max. Length: 8000mm (4) Max. Weight: 3000kg 3. Bar Forging Machine 3-1. Forging Ability (1) Number of rams: 4 (2) Force / ram: max. 7000kN (3) Hydrau ...

Vertical turning machine manufactured in 2008. This HONOR SEIKI VL 46A features a maximum turning diameter of 460 mm and a turning height of 400 mm. It is equipped with a chuck diameter of 300 mm or 380 mm and a spindle speed of up to 3000 rpm. If you are looking to get high-quality turning capabilities, consider the HONOR SEIKI VL 46A machine we have for sale. Contact us for further details regarding this machine.

TECHNICAL DATA SHEET CNC – Gantry gantry milling machine TRIMILL brand Type VF3016 Year of construction 2017 Control HEIDENHAIN iTNC530 HSCI Travel X-axis (longitudinal): 3,000 mm Y-axis (transverse): 1,600 mm Z-axis (vertical): 1,200 mm B-axis (swivel axis milling head) +/- 100 ° C-axis (rotation axis milling head) +/- 240 ° Structure / Axis concept AC servomotors with digital control for all axes Gantry drive of the X-axis Rack and pinion drive in the X-axis, backlash-free due to electrically prestressed, water-cooled motors 2 ball screws each in the Y and Z axes Guides of all linear axes are designed as prestressed roller guides Hydro-pneumatic weight compensation of the Z-axis via 2 cylinders Stationary frame components made of mineral casting, movable main components made of grey or nodular cast iron Double beams in load- and thermosymmetric d ...

It has 3 units, built in 1998

This 4-axis Okuma MA-600 HB was manufactured in 2007. It features a maximum machining area of 1000 x 900 x 1000 mm, a spindle speed up to 6000 rpm, and a rapid feed rate of 30 m/min. With 150 tool positions and a MAS BT 50 tool holder, its ideal for complex machining tasks. Consider the opportunity to buy this Okuma MA-600 HB horizontal machining centre. Contact us for more information about this machine.

This 4-axis HBS MPW 2010/3K/4MZ/1FK was manufactured in 2019. It features a maximum X-axis travel of 1450 mm and Y-axis travel of 2250 mm, with a motorised working stroke of 0-200 mm. The machine is equipped with advanced servomotor technology and includes a fully automatic stud feeder and a chip extraction unit. If you are looking to get high-quality welding capabilities, consider the HBS MPW 2010/3K/4MZ/1FK machine we have for sale. Contact us for further details.

Hamburger forming machine, Sind, NEW Capacity: 2100 pieces / hour Hamburger forming diameter: 90 mm to 120 mm

Hamburger forming machine, Sind, NEW Capacity: 1000 pieces / hour Hamburger forming diameter: 90 mm to 120 mm

New KUSING four-sided brush / grinding machine made in Europe. Compact machine with quick adjustment and optional parameters. Technical parameters: Maximum material width: 250 mm Maximum material height: 150 mm Horizontal motor power: 1.5 kW Vertical motor power : 1.1 kW Diameter of the shaft : 40 mm Tool diameter : 200 / 250 mm Minimum possible material length : 250 mm Possible machine versions with 3 spindles KuSING has been manufacturing woodworking machines since 1991. In the field of 4-sided brushing, we offer a wide range of manufactured machines for every application. Parameter changes possible as required. The advertisement was automatically translated. Translation errors are possible.

New brush machine KUSING K2Le-400 Working width 400mm Working height up to 310mm (with brushes Ø 250mm) 2 working heads 2x 4kw Feed speed 2-12 m/min. Suitable for brushes Ø 250mm, L 400mm, D 40mm. Motorized spindle lift. Weight 1100 kg. The machine of the highest and heaviest category, suitable for serial production and heavy work.

Main drive = drive unit with motor and gearbox: SEW-Eurodrive K76 DT100LS-4TF/VS with motor fan A2E200-AA01-65

This 3-axis TOPEDM TSH-400N die-sinking EDM machine was manufactured in 2005. It features a working area of 400 x 400 x 440 mm and a table size of 480 x 458 mm. The machine is capable of drilling holes with diameters ranging from 0.15 to 6.0 mm. If you are looking to get high-quality hole drilling capabilities, consider the TOPEDM TSH-400N machine we have for sale. Contact us for further details.

X-axis: 500mm, connected load: 30.8kVA, length: 1624mm, width: 1560mm, height: 2829mm, weight: 2.4t, operating hours: 8,840h, power-on time: 89,352h, total operating hours: 28,840h, an on-site inspection is possible.

Small compact brush machine for companies that are just starting out with brushing. Specifications: Working width 400mm Working height n.a. (or limited by the height of the feeder) 1 working head 3 kW (4kw optional). Suitable for brushes dia.250mm, L 400mm, d40mm. Brush from below, without feed is possible to work manually. Made in Slovakia, EU. Parameters adjustable on request. The price is without feeder and without tools

Cutting length X/Y: 250mm/250mm, max. sheet thickness steel/stainless steel: 6mm/4mm, table dimensions X/Y: approx. 1200mm/900mm, weight: approx. 1200kg. Including a 500mm stop extension. An on-site inspection is possible.

A compact electroplating unit is offered. Electrolytic bath for gold and silver refining applications, control: microprocessor control. Equipped with an integrated control unit with display and keypad. Weight: approx. 15kg, overall dimensions X/Y/Z: approx. 450mm/300mm/350mm. Inspection by arrangement is possible.

Clamping force: 800kN, tie-bar spacing: 400mm, injection unit: 430, max. flow rate: 76l/min, max. hydraulic pressure: 210bar, control: CDIAS, weight: 3.6t, an on-site inspection is possible.

Clamping force: 1250kN, tie-bar spacing: 475x450mm, injection unit: 440, max. flow rate: 100l/min, max. hydraulic pressure: 190bar, weight: 6.6t, an on-site inspection is possible.

New brushing machine KUSING K2L-600e, machine manufactured in Slovakia, in Europe by a company with more than 30 years of experience with woodworking machines. Working width 400mm Working height up to 310mm (with brushes Ø 250mm) 2 working heads 2x 4kw Feed speed 2-12 m/min. Suitable for brushes Ø 250mm, L 400mm, D 40mm. Motorized spindle lift. Weight 1250 kg. The machine of the highest and heaviest category, suitable for serial production and heavy work.

Clamping force: 1600kN, width: 1600mm, height: 2200mm, weight: 6.8t, an on-site inspection is possible.

Clamping force: 650kN, length: 4000mm, width: 1600mm, height: 2200mm, weight: 3.9t, an on-site inspection is possible.

Clamping force: 1500kN, rated current: 133A, connected load: 74kW, an on-site inspection is possible.

Clamping force: 800kN, an on-site inspection is possible.

Small compact brushing machine for companies that are just starting brushing or are looking for a compact machine for processing heavy wood Specifications: Working width 400mm Working height n.a. (or limited by the height of the feed) 2 working heads 3 kW (4kw optional). Suitable for brushes dia.250mm, L 400mm, d40mm. Brush from below, without feed is possible to work manually. Made in Slovakia, EU. Parameters adjustable on request. The price is without feeder and without tools

Connection: 380V/50Hz, current consumption: 7.1A, power: 2.1kW, weight: approx. 400kg. The machine was removed from production in working condition approx. three years ago and subsequently placed in storage. CE marking available. An on-site inspection is possible.

Four identical Kettma Hamburg 100 KA linking machines, one KMF 105 linking machine, Series 5, and spare parts are available, an on-site inspection is possible.

2018 Forge from 60 to 400 Ton Forging and Annealing Furnace ATI furnace It is made for heat treatment of steel (originally 100Cr6 steel). Possible customers : automotive suppliers The last heat treatment on this line was made in 2018. For a better industrial usage, the supervision of the line need to be upgraded. The original constructor is FDI (Deleau Furnace), which was bought by ATI Furnace ati furnace nabertherm

Two identical screen printing machines are available, max. frame dimensions: 750x1100mm, compressed air connection: 8bar, indexer connected load: 2.5kW, squeegee connected load: 0.6kW, an on-site inspection is possible.

X-axis: 300mm, Y-axis: 200mm, Z-axis: 200mm, max. table load: 20kg, temperature gradient: 2K/h, relative humidity: 40-70%, length: 750mm, width: 737mm, height: 1664mm, weight: 260kg, operating hours: approx. 100h, with documentation, regularly serviced and inspected by the manufacturer. An on-site inspection is possible.

met manuele kruistafel

Horizontal turning machine manufactured in 2007. This Mazak QuickTurn Nexus 200 CNC lathe features an 80 mm spindle bore and comes equipped with a bar feeder, collet chuck, and Matrix control. The machine has a weight of 4380 kg and includes tooling. If you are looking to get high-quality turning capabilities, consider the Mazak QuickTurn Nexus 200 machine we have for sale. Contact us for further details.

- Infinitely variable speed control - Quickly adjustable drilling depth stop - Thread cutting device - Undervoltage triggers - Table height adjustment via rack - LED lighting in the head - Continuous/normal drilling capacity R1: 23/25 mm - Thread cutting performance (depending on slope) R1: max.M 16x1 - Spindle MK II - Drilling depth 100 mm - Projection 260 mm - Column diameter 110 mm - Usable table surface (W x L) 420 x 340 mm - T-slot size (arm): number 2, distance 125 mm - Speed display digital - Drilling depth display digital - Drill depth stop quickly adjustable - Feed by hand - Motor three-phase current 400 V - Spindle speeds infinitely variable R1 with 20-2,000 1/min Option: Coolant device: € 525,- FACTORY WARRANTY: 3 years DELIVERY: free domicile incl. packaging NOT THE RIGHT MACHINE? WE ALSO CARRY OTHER FLOTT PRODUCTS - ASK FOR A QUOTE! FAS ...

This 3-axis Hurco BMC30AP was manufactured in 1994. It features X, Y, and Z travels of 760 mm, 460 mm, and 500 mm, respectively, with a robust table size of 1000 x 450 mm and a maximum table load capacity of 500 kg. If you are looking to get high-quality machining capabilities, consider the Hurco BMC30AP vertical machining centre we have for sale. Contact us for further details.

Engel Victory 750/150 Tech (146) without funnel Item number: 146 Availability: In stock Year of construction: 2004 Brand: Engel Specifications Spray weight: 354 g Clamping force: 1,500 kN Screw diameter: 50 mm Spray pressure: 1427(1909) bar Spar spacing: Tie barless mm Clamping plate size: 750 x 850 mm Control: CC200 Language: German Power: 61 kW Operating hours: 98108 h Weight: 9500 kg Dimensions: 5.7 x 2 m Funnel: No Core train: Yes Euromap: Yes