machi used for sale

bore capacity in steel (diameter): 30 mm throat: 320 mm bore stroke: 135 mm thread dia.: M 20 mm spindle turning speed range: 72 - 2600 U/min feeds: 0,1 - 0,2 - 0,3 mm/U spindle taper: MT 3 table surface area: 370 x 360 mm Distance spindle/table max.: 850 mm distance spindle/base plate: 1400 mm voltage: 400 V / 50 Hz total power requirement: 1,0 - 1,5 kW weight of the machine ca.: 0,5 t dimensions of the machine ca.: 1,2 x 0,7 x 2,3 m • with cooling device • threading attachment The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Double bench grinder, double grinding machine, pedestal grinder, pedestal grinder -Motor power: 1.1 kW -Speed: 1745 rpm -Grinding discs: max. Ø 315 mm -Operating voltage: 380 volts -Weight: 230 kg

Beading machine, flanging machine, seam closing machine, motorized beading machine -Max. sheet metal capacity: 1.25 mm -electrically driven: 1.1 kW -Protrusion: 50 mm -Dimensions: 900/800/H1100 mm -Weight: 250 kg

table length: - mm table width: - mm grinding wheel diameter: 400 mm max. width of grinding wheel: 50 mm total power requirement: 1,5 kW weight of the machine ca.: 0,3 t dimensions of the machine ca.: 1 x 1 x 1 m For Pre-Dressing the Gear Grinding Wheels apart from the machine, particularly to profile grinding wheels for two-flank grinding, module 12 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Thread cutting machine with Stehler jaws, thread cutting head -Hole diameter: 190 mm -Size: 1/2 - 2 inches -Weight: 130 kg

Multifunctional punch, punch press, hole punch, pneumatic hole punch -operated: pneumatically -Year of manufacture: 1995

Double-end tenoner, edge processing machine, scoring motor, cutting motor, electric motor, spindle motor, milling motor -Motor: 1.5 kW 2840 rpm at 50 Hz -Shaft mounting: Ø 15 mm -Weight: 12 kg

Impact drilling machine, row drilling machine -Support table: 2200 mm -Multi-spindle head: 5 drill bits -Drill spacing: 32 mm (other multi-spindle heads available) -Version: mobile -Stops: adjustable -Dimensions: 2300/600/H1350 mm -Weight: 240 kg

Radius/flush milling machine, edge milling machine, edge router, shaped parts milling machine For simultaneous upper and lower radius/flush milling of protruding edge materials on straight edges as well as curved workpieces with inside and outside radii. -Built-in milling cutters: 30° -Dimensions: 1000/600/H1450 mm -Weight: 60 kg

max. wheel diameter: 1600 mm gear width: 250 mm max. module: 20 min. module: 1,5 base circle dia. - max.: 1450 mm base circle dia. - min.: 150 mm specimen weight from/to: 4000 kg feeler adjustment movement - parallel: 1400 mm max.helical angle: 0 - 90 ° wheel diameter with counterstay: 1000 mm feeler adjustment movement - parallel: 800 mm centre height: 1150 mm electrics - voltage/frequency: 400 / 50 V/Hz dimensions of the machine ca.: 2,8 x 2,4 x 2,3 m total power requirement: 2 kW weight of the machine ca.: 3 t Universal Involute and Helix Testing Machine - modernized 1995 Machine is suitable for measuring all individual tooth data on straight and helical spur gears, and shaping and shaving cutters. Following tooth data can be tested: Tooth flanks, Involute base circle dia. and pressure angle, Profile c ...

sheet width: 2020 mm plate thickness: 1,5 mm distance between columns: 2050 mm Daylight opening: 100 mm total power requirement: 0,75 kW weight of the machine ca.: 1 t dimensions of the machine ca.: 2,7 x 1 x 1,5 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Double-end tenoner, edge processing machine, flush trim router bit, edge router bit, spindle motor, milling motor -2x motor: 0.4 kW 20 shaft 11300 rpm at 200 Hz -Motor: mounted on guides -Motors: swiveling -Cutter: with indexable inserts -3x consoles: each with 2 motors Price: per piece -Weight: 60 kg/piece

Spindles, machining unit, automatic drilling machine, drilling machine, pillar drilling machine, multi-spindle drilling machine, row drilling machine, dowel drilling machine -Max. feed rate: Stroke 60 mm -Drive: 1.1 kW -Recording: 10 x 17 mm -Number: 2x quill processing units available Price: per piece -Weight: 25 kg/piece

bore diameter: 550 mm Spindle diameter: 100 mm bore depth: 320 mm turning speeds: 10 70 U/min feed stepless: 0 - 12 mm/min voltage: 380 V / 50 Hz total power requirement: 3 kW weight of the machine ca.: 1.35 t dimensions of the machine ca.: 1,0 x 2,5 x 1,0 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 150 mm y-travel: 300 mm z-travel: 350 mm table surface area: 350 x 200 mm spindle turning speed range: 475 - 20000 U/min total power requirement: 0,4 kW weight of the machine ca.: 0,46 t dimensions of the machine ca.: 1,2 x 1 x 1,4 m • without templates The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle diameter: 105 mm x-travel: 1200 mm y-travel: 1000 mm z-travel: 325 mm adjustment of cross-rail: 785 mm distance between columns: 1600 mm distance spindle - column min./max.: 215 / 1100 mm spindle feeds - stepless: 1 - 6000 mm/min spindle taper: ISO 40 spindle turning speed - stepless: 40 - 1800 U/min table surface area: 900 x 1500 mm workpiece weight: 2000 kg spindle drive: 5 kW total power requirement: KVA weight of the machine ca.: 6 t dimensions of the machine ca.: 3,3 x 3,0 x 2,8 m dimensions of the machine ca.: 3,3 x 3,0 x 2,9 m • with RENISHAW -detector OMP 40, • mechanical refurbishing and new control HEIDENHAIN TNC 410 in year 2002 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Double-end tenoner, edge processing machine, scoring motor, chipper motor, milling motor, spindle motor -Power: 0.4 kW at 12000 rpm at 200 Hz -Power: 0.60 kW at 16500 rpm at 300 Hz -with indexable insert milling cutter -Number: 3x motors available Price: per piece -Weight: 6 kg/piece

Double-end tenoner, edge processing machine, scoring motor, chipper motor, spindle motor, milling motor -1x motor: 1.5 kW 2740 rpm at 50 Hz -Shaft mounting: Ø 20 mm/M16 mm -Motor: mounted on guides -Travel distance: 160 mm -Weight: 30 kg

x-travel: 630 mm y-travel: 700 mm z-travel: 630 mm Control: Meldas M650 tool adaptor: HSK-A63 Table dimensions: 450x450 mm Table load: 400 kg number of spindle speeds: 300 - 20.000 min-1 total power requirement: 30 kW weight of the machine ca.: t dimensions of the machine ca.: m FEED RATE Rapid feed rate X,Y 120 m/min Rapid feed rate Z 60 m/min Rapid feed rate B 120 m/min Cutting feed rate X,Y,Z 0,1 – 60 m/min SPINDLE RPM spindle 300 – 20.000 min-1 Spindle taper HSK-A63 Coolant Through spindle ATC Tool holder Special HSK-A63 2 Face contact tool Tool magazine storage 40 pcs Tool change time 2,5 sec. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

workpiece length: 3250 mm swing diameter: 630 mm grinding wheel diameter: 900 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Serveral Steadies Dresser Cooland System The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 10500 mm y-travel: 2750 mm y-travel: (3350) mm z-travel: 1500 mm turning speeds: 3500 U/min Tool changer: 80 Control: Heidenhain TNC 430 M positioning accuracy: 1 ° milling-head swivable +/-: CNC Plate area: 12000x2500 mm chip conveyor: spindle taper ISO: 50 Spindle capacity: 37 KW Feed: 6000 mm/min Rapid movement: 15000 mm/min total power requirement: kW weight of the machine ca.: 65 t dimensions of the machine ca.: 18,1x6,7 m CNC angle head 360 ° with 1 ° Hirtverzahnung spindle hours 13500 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 1800 mm y-travel: 1000 mm z-travel: 1000 mm table surface area: 1000x1000 mm turning speeds: 4000 U/min head swivability: 90 ° Tool changer: 45 chip conveyor: control: Heidenhain type: total power requirement: kW weight of the machine ca.: t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Double end tenoner, edge processing machine, scoring motor, chipper motor, electric motor, spindle motor, milling motor -Motor: 4.4 kW 2890 rpm at 50 Hz -Motor: 6.6 kW 5890 rpm at 100 Hz -Shaft mount: Ø 35 mm -Dimensions: 550/180/H200 mm -Weight: 40 kg

Double end tenoner, edge processing machine, scoring motor, chipper motor, electric motor -Motor: 3 kW 2860 rpm at 50 Hz -Motor: 4.4 kW 5800 rpm at 100 Hz -Shaft mount: Ø 40 mm -Shaft length: 150 mm -Dimensions: 600/240/H150mm -Weight: 40kg

Double-end tenoner, edge processing machine, scoring motor, cutting motor, electric motor, spindle motor, milling motor -1x motor: 0.3 kW 12000 rpm at 200 Hz -Indexable insert milling cutter -Motor: mounted on guides -Number: 3x motors available Price: per piece -Weight: 5 kg/piece

max. wheel diameter: 2000 mm gear width: . mm max. module: 22 max. hob diameter: 250 mm hob turning speeds: 16-92 U/min total power requirement: 13 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 8 , 600 , 230

High-performance industrial planing machine In good condition, lots of accessories '

Dowson bread slicer Model: B51C Fully automatic bread slicer, Constructed to handle a variety of loaves, up to 100 loaves per minute, comes with two different cutting heads, overall length 2800mm, 3Ph

Double-end tenoner, edge processing machine, scoring motor, cutting motor, electric motor, spindle motor, milling motor -Motor: 2.2 kW 2820 rpm at 50 Hz -Motor: 4.2 kW 5810 rpm at 100 Hz -Shaft mounting: Ø 30 mm -Overall dimensions: 340/130/H220 mm -Weight: 18 kg

Double-end tenoner, edge processing machine, scoring motor, cutting motor, electric motor, spindle motor, milling motor -Motor: 4 kW 8760 rpm at 300 Hz -Shaft mounting: Ø 30mm -Dimensions: 390/160/H180 mm -Weight: 25 kg

Lamination Machine

Bore diameter: , Number of heads horizontal: , Number of heads vertical: , The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Bore diameter: variabel mm Number of heads horizontal: 3 St. Number of heads vertical: 4 St. Götzinger Power Drill in special version with dübelleim and press-in station With the Götzinger PowerDrill, you can choose: - Drill the front and long sides - Doweling of doors, seatings, fighters - The drilling patterns are freely programmable - You can: Grip handle and corner bearing, with quick-change Multi-spindle drilling heads - You can: lock casings, pusher and PZ as well as 3D tapes and drill - The machine has a horizontal and a vertical milling unit - A simple control lets you create drilling and milling programs, Save and recall POWER DRILL - drilling and milling machine Universal drilling machine for drilling olives, corner bearings, dowel work On the front and the front, milling, lock boxes, tapes, etc. Base in stable design, covered with sheet metal Table top 1800 x 200 mm  ...

Double-end tenoner, edge processing machine, scoring motor, cutting motor, electric motor, spindle motor, milling motor -Motor: 3 kW 2880 rpm at 50 Hz -Motor: 4.4 kW 5820 rpm at 100 Hz -Shaft mounting: Ø 35 mm -Weight: 30 kg

Double-end tenoner, edge processing machine, scoring motor, cutting motor, electric motor, spindle motor, milling motor -Motor: 2.2 kW 2820 rpm at 50 Hz -Motor: 4.2 kW 5810 rpm at 100 Hz -Shaft mounting: Ø 30 mm -Dimensions: 340/130/H220 mm -Weight: 20 kg

Motor output: , kW automatic: , Table dimensions: , mm ! Please notice the VIDEO of this unit ! For window producers we recommend a spinde with 40 mm diameter and 160 mm usable length, Tools should have inside diameter of 110 to 120 mm Attached the description with options as pdf-file. Price list on request! For window production the manufacturer recommends following options of price list: Art.-Nr.bo1000 base unit Art.-Nr.bo1050 protection Art.-Nr.bk0180 arc marker Art.-Nr.gt0250 glazing bead construction 1 lengthenning : bo1720 ot bo2510. (technical details according to manufacturer - without guarantee!) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Number of boring motors: 1 St. boring of corner bearing 1=yes, 0=no: 0 nein boring of olive 1=yes, 0=no: 1 ja The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Table dimensions: - mm Motor output: 7,5 kW Spindle diameter: 40 mm reus: 6000 U/min Weight: 300 kg Year: 2018 Universal profiler Götzinger UP 1730 Machine for frontal and cross-side machining. Different application technology for wood products First-class surface quality of machined workpieces due to high speed, Particularly stable bearing of the milling shaft and through synchronous milling. Rapid tool change through one-sided mounted cutter shaft and through swiveling clamping device. The whole work process, such as clamping, pneumatic-hydraulic table feed with speed control (stepless) and fast reverse. By exchanging the milling segments and by changing the attachment points can be up to ten different with a single profile milling set Create profile companies. Technical specifications: Cutting depth max .: 30 mm Milling height max .: 150 mm Voltage cross section per stroke max. Softw ...

Double-end tenoner, edge processing machine, scoring motor, cutting motor, electric motor, spindle motor, milling motor -Power: 1.5 kW at 18000 rpm at 300 Hz -Shaft mounting: Ø 20 mm -Number: 1x motor available -Weight: 10 kg

Double-end tenoner, edge processing machine, scoring motor, chipper motor, spindle motor, milling motor, electric motor -Power: 1.5 kW 12000 rpm at 200 Hz -Holding shaft: Ø 16 mm -Dimensions: 380/75/H160 mm -Weight: 8kg

Double-end tenoner, edge processing machine, scoring motor, cutting motor, electric motor, spindle motor, milling motor -1x motor: 0.3 kW 18000 rpm at 300 Hz -Hole: Ø 20 mm -Number: 2x motors available -Price: per piece -Weight: 3 kg/piece

Double-end tenoner, edge processing machine, scoring motor, cutting motor, electric motor, spindle motor, milling motor -1x motor: 0.3 kW 17300 rpm at 300 Hz -Indexable insert milling cutter -Hole diameter: 20 mm with keyway -Number: 3x motors available -Price: per piece -Weight: 4 kg/piece

Number of boring motors: 1 St. boring of corner bearing 1=yes, 0=no: 1 boring of olive 1=yes, 0=no: 1 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. workpiece length: 4500,6000 mm profile spindle: 3 Stück main drive: 24 kW Control: Siemens 840d Working Process Logos Life Evo XS 2345 ------------------------------- Vollautomatisches CNC-Fensterfertigungsanlage mit automatischer Be- und Entladung. 2 Portale mit 3 Frässpindeln mit 4- und 5-Achstechnologie CNC-gesteuerter Manipulator für Werkstückpositionierung mit 16 Stück Doppelzangen 8 Stück komplett unabhängige Werkstückspanner für höchste Felxibilität und Produktivität 128 Werkzeugplätze NEU: Working Process baut nun auch 1-spindlige Anlagen mit bewährter Technologie für kleinere Betriebe! Nebenstehend finde Sie aktuelle Videos dieser Baureihe. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 600 mm y-travel: 400 mm z-travel: 400 mm spindle taper ISO: 40 spindle turning speed range: 80 - 4000 U/min transmission ratio: 18 feed range: 0,1 - 2000 mm/min rapid traverse: x = 4 / y = 3 / z = 5 m/min table load capacity: 250 kp voltage: 380 V / 50 Hz spindle drive: 5,5 kW total power requirement: 16 kVA weight of the machine ca.: 2,6 t dimensions of the machine ca.: 3,8 x 4,3 x 2,0 m • CNC-control system 432 E • Operating hours: 37719 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Gate Sharper Manufacturer Vollmer for Inclined and straight ground

Double-end tenoner, edge processing machine, scoring motor, cutting motor, electric motor, spindle motor, milling motor -Motor: 0.3 kW 12000 rpm at 200 Hz -Hole: Ø 20 mm -Number: 3x motors available -Price: per piece -Weight: 3 kg

Double-end tenoner, edge processing machine, scoring motor, cutting motor, electric motor, spindle motor, milling motor -1x motor: 0.7 kW 11400 rpm at 200 Hz -Voltage: 220 V -Hole: Ø 20 mm -Weight: 5 kg

Double-end tenoner, edge processing machine, scoring motor, cutting motor, electric motor, spindle motor, milling motor -1x motor: 0.3 kW 18000 rpm at 300 Hz -Voltage: 165 V -Hole diameter: 16 mm -Number: 12 motors available Price: per piece -Weight: 3 kg/piece

plate thickness: 1,6 mm pressure: 450 MPa : 150 x 150 x 90° table surface area: 650 x 500 mm : 875 mm cutting angle - upper blade: 4 ° weight of the machine ca.: 75 kg • manual notching machine with lower frame • sheet thickness (steel 450MPa) to 1.6 mm, aluminium to 2.25 mm, plastic to 3.0 mm, • machine for demonstration The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.