133,955 used machines on RESALE, but how to find them? Machine Search
Without the exhaust pipes Auction-ID: A1-43429-51
Scattering unit Scattering BM Tec - with 2 satchels (on both sides) - Running tables individually removable - completely in stainless steel - can be driven on castors - 4 seed containers - with rack trolley for storing the running tables
Spiral dough kneading machine Kemper SP 125 L used bakery machines, kneading machine spiral kneader with solid stainless steel boiler from Kemper robust and stable, spiral kneader Kemper SP 125 L for the production of high-quality Teigen.Es can roll dough, bread dough, pastry dough and similar doughs.Kemper spiral kneaders work on 3 zones kneading principle spiral guide rod so the doughs become woolly, processing-friendly with maximum oxygen input in the dough. Kemper Spiral Kneader - Stainless steel boiler - Stainless steel spiral - 2 x timers automatic - 2 x speeds slow and fast - with flour dust cover - for 125 kg of flour or 200 kg of dough Machine can be inspected and tested in our warehouse. Shipping and trade-in as well as further information and pictures on request.
Belt round knitter Kemper SBR-2500 Kemper belt round knitter with 2500mm long belts, with flour spreader.Speed adjustable via pot, machine can be moved on rollers, height adjustable. The machine is visually and technically in good condition, can be visited and tested in the warehouse in Bielefeld. We will be happy to send you further pictures and information on request.
used
Technical DataFeed rate longitudinal/transverse/vertical40000/40000/40000 mm/minRapid traverse longitudinal/transverse/vertical40/40/40 m/minWorking area 1Longitudinal735 mmCross650 mmVertical560 mmGeneralUniversal Machining Centre in monoBLOCK construction; Control: CELOS X with HEIDENHAIN TNC7 Tool changerTool changer planevertical Type of gripperDouble gripper Number of tools60 Max. tool length315 mmMax. tool diameter with occupied adjacent pockets80 mmMax. tool dia. with free neighbouring pockets160 mmFloor space/WeightWeight approx.14500 KgNC swivel rotary tableTable surface Ø650 mmCentre bore 32 mmMaximum load (table centre) 600 KgRotation Speed 5. Axis 20 rpm5. Axes (swivelling range) +/- 120 degree4. Axes (swivelling range) 360 x 0,001 degreeRotation speed max.4. Axis 40 rpmDistance between T-Slots 63 mmNumber of Slots 9Slot width 14 mmIntegrated motor spindle speedMASTER®Drive ...
used
GeneralUniversal milling and turning machining centre with duoBLOCK construction; Control: CELOS with Heidenhain TNC 640 Technical DataFeed rate longitudinal/transverse/vertical60000/60000/60000 mm/minRapid traverse longitudinal/transverse/vertical60/60/60 m/minWorking area 1Longitudinal800 mmCross1050 mmVertical850 mmTool changerApplicationUniversal Type of magazineWheel Tool changer planehorizontal Type of gripperDouble gripper Number of tools123 Uni milling head with controlled B axis HSK-A 63Universal milling head with controlled B axis HSK-A 63 Continuously positioning universal milling head (B axis) with integrated motor spindle for 5 axes positioning and simultaneous machiningNC mill-turn table with palletNC mill-turn table with pallet number of T-slots: - 1x cross slot 14 H7 / 0.55 H7 - 12x star slots 14 H11 / 0.55 H11 / 22.5° max. table speed milling operation: 30 rpm turning o ...
used
GeneralUniversal milling and turning machining centre with duoBLOCK construction; Control: CELOS X with Siemens SINUMERIK ONE Technical DataFeed rate longitudinal/transverse/vertical60000/60000/60000 mm/minRapid traverse longitudinal/transverse/vertical60/60/60 m/minWorking area 1Longitudinal800 mmCross1050 mmVertical850 mmTool changerApplicationUniversal Type of magazineWheel Tool changer planehorizontal Type of gripperDouble gripper Number of tools123 Uni milling head with controlled B axis HSK-A 63Universal milling head with controlled B axis HSK-A 63 Continuously positioning universal milling head (B axis) with integrated motor spindle for 5 axes positioning and simultaneous machiningNC mill-turn table with palletNC mill-turn table with pallet number of T-slots: - 1x cross slot 14 H7 / 0.55 H7 - 12x star slots 14 H11 / 0.55 H11 / 22.5° max. table speed milling operation: 30 rpm turn ...
Key data: 400 mm
S375G SAMPUTENSILI "CNC" Horizontal Gear Profile Grinding Machine, suitable for the precision grinding of external spur and helical gears and shafts, as well as internal spur and helical gears and splines. The machine has the added capability of grinding worms, rotors, and other screw-type workpieces of similar profile up to 14.76” (375mm) which was factory OEM standard - but delivered at 15.74" (400mm) diameter, and 34.25” (870mm) in length. The machine is also equipped with the optional” on-board CNC” dressing feature, and the on-board CNC” gear inspection system-feature. Serial No. 2376 (New in 2007) This is a first-class, highly versatile gear grinding machine, in superlative” condition throughout, which may be inspected, in running service, at our customer’s plant facility, by appointment. -The machine would require acquisition & adaptation of an appropria ...
AUERBACH AX 5 B CNC bed milling machine was built in 2009 in Germany by Auerbach Maschinenfabrik GmbH. It is an extremely efficient machine designed for even the most demanding production challenges. The AUERBACH AX5 B enables the machining of large, heavy workpieces that are used, e.g. in the aerospace and automotive industry. The machining process is performed fully automatically on the rotary table by means of a 5-axis swivel workhead. This solution enables comprehensive machining of workpieces in a single work cycle, without the need for repositioning them. The workhead is equipped with an electro-spindle rotating at a maximum speed of 12000 rpm. It provides the excellent dynamics required for both roughing and finishing operations. The cutting tools, on the other hand, are continuously cooled to increase their overall service life. The AUERBACH AX 5B CNC machining center is offered ...
Injection Unit Screw Diameter: Ø 50 Injection Volume: approx. 392 cm³ Injection Pressure: up to 2,100 bar Injection Rate: approx. 200 cm³/s Plasticizing Capacity: approx. 30 g/s (PS) Screw L/D Ratio: 22:1 Nozzle Contact Force: 50 kN Clamping Unit Clamping Force: 1,900 kN (190 t) Clamping System: Zhafir Zeres all-electric with servo-hydraulic auxiliaries Platen Size (H × V): approx. 770 × 720 mm Mould Opening Stroke: 450 mm Max. Daylight Opening: approx. 900 mm Min. Mould Height: 200 mm Ejector Stroke: 150 mm Ejector Force (fwd / back): 40 / 30 kN Drive & Control Drive Type: Hybrid electric / servo-hydraulic (Zeres series) Connected Load: 45 kW Full Load Current: 76 A Short Circuit Current: 25 kA Power Supply: 400 V / 50 Hz / 3-phase Control System: SIGMATEK CNC-based control with Zhafir HMI touchscreen Equipment / Features Drive ...
Injection Unit Screw Diameter: Ø 65 Injection Volume: approx. 1,075 cm³ Injection Pressure: up to 1,750 bar Injection Rate: approx. 400 cm³/s Plasticizing Capacity: approx. 85 g/s (PS) Nozzle Contact Force: 110 kN Clamping Unit Clamping Force: 5,500 kN (550 t) Clamping System: ENGEL Duo two-platen design Platen Size (H × V): approx. 1,350 × 1,300 mm Mould Opening Stroke: 850 mm Max. Daylight Opening: approx. 1,450 mm Min. Mould Height: 400 mm Ejector Stroke: 220 mm Ejector Force (fwd / back): 95 / 65 kN Drive & Control Drive Type: Hydraulic (pre-ecodrive generation) Hydraulic System Pressure: up to 160 bar Pump Motor Power: 45 kW Total Installed Power: approx. 65 kW Power Supply: 400 V / 50 Hz / 3-phase Control System: ENGEL EC88 digital control panel Equipment / Features Clamping System: Robust two-platen design for hi ...
Injection Unit Engine not working Screw Diameter: 65 Ø Injection Volume: approx. 1,025 cm³ Injection Pressure: up to 1,800 bar Injection Rate: approx. 450 cm³/s Plasticizing Capacity: approx. 80 g/s (PS) Nozzle Contact Force: 100 kN Clamping Unit Clamping Force: 5,000 kN (500 t) Clamping System: ENGEL Duo two-platen design Platen Size (H × V): approx. 1,300 × 1,200 mm Mould Opening Stroke: 800 mm Max. Daylight Opening: approx. 1,400 mm Min. Mould Height: 400 mm Ejector Stroke: 200 mm Ejector Force (fwd / back): 90 / 60 kN Drive & Control Drive Type: Servo-hydraulic (ecodrive inside) Hydraulic System Pressure: up to 160 bar Pump Motor Power: 37 kW Total Installed Power: approx. 55 kW Power Supply: 400 V / 50 Hz / 3-phase Control System: ENGEL CC300 touchscreen control Equipment / Features Clamping System: Two-platen design f ...
Injection Unit Screw Diameter: Ø 70 Injection Volume: 1,239 cm³ Injection Pressure: up to 2,000 bar Injection Rate: approx. 500 cm³/s Plasticizing Capacity: approx. 95 g/s (PS) Screw L/D Ratio: 22:1 Nozzle Contact Force: 120 kN Clamping Unit Clamping Force: 4,500 kN (450 t) Clamping System: Two-platen design (Jupiter II series) Platen Size (H × V): approx. 1,140 × 1,040 mm Mould Opening Stroke: 950 mm Max. Daylight Opening: approx. 1,650 mm Min. Mould Height: 400 mm Ejector Stroke: 200 mm Ejector Force (fwd / back): 100 / 70 kN Drive & Control Drive Type: Servo-hydraulic system Main Motor Power: 62 kW Full Load Current: 104 A Short Circuit Rating: 25 kA Power Supply: 400 V / 50 Hz / 3-phase Control System: Haitian KEBA touchscreen control Equipment / Features Clamping Concept: Two-platen system for space efficiency and ...
Decoiler D = 1000 Auction-ID: A7-46309-16
Injection Unit Screw Diameter: Ø 70 Injection Volume: approx. 1,540 cm³ Injection Pressure: up to 1,800 bar Injection Rate: approx. 500 cm³/s Plasticizing Capacity: approx. 95 g/s (PS) Nozzle Contact Force: 120 kN Clamping Unit Clamping Force: 6,500 kN (650 t) Clamping System: ENGEL Duo two-platen design Platen Size (H × V): approx. 1,600 × 1,500 mm Mould Opening Stroke: 900 mm Max. Daylight Opening: approx. 1,600 mm Min. Mould Height: 450 mm Ejector Stroke: 250 mm Ejector Force (fwd / back): 110 / 70 kN Drive & Control Drive Type: Servo-hydraulic (ecodrive inside) Hydraulic System Pressure: up to 160 bar Pump Motor Power: 45 kW Total Installed Power: approx. 65 kW Power Supply: 400 V / 50 Hz / 3-phase Control System: ENGEL CC300 touchscreen control Equipment / Features Clamping System: Two-platen design for compact footp ...
Gurutzpe Super A lathe. Distance between centers: 6.000mm. Swing: 1020mm. Swing in carriage: 745mm. Swing on gap: 1440mm. Spindle bore: 140mm. Speeds: 16 (9-500rpm). Equipped with 4 independent chuck and steady rest. Equipped with new universal chuck of 500mm. Equipped with new DRO Fagor. Equipped with new Multifix turret. Motorized carriage. CE protections and european certificate for second hand machines.
Unbek. Type, YOC ca. 1990, Revision 2002 Specifications: - Bending capacity at 45 kg / mm² up to approx. Ø 25 x 3 mm - Bending angle left + right selectable - Hydr. Double-sided bending function - Hydr. Delivery ° - Drive 400 V / 11 kW - Space requirement approx. W 1750 x H 2200 x D 2300 mm - Weight approx. 1600 kg - with - bending angle adjustment - Hydr. Voltage - Bending tools
Specifications: - max. material thickness at 40 kg/mm² strength approx. 3 mm - Shaft mount 45 mm - manual hydraulic feed of the top roller - E. foot switch - Drive 400 V / 1.1 kW - Space requirement approx. W 550 x H 1200 x D 1200 mm - Weight approx. 180 kg
Bickel MPA 65 Electronically controlled Stamp Perforating machinePerforation of postal stamps, tokens, calendars. Size 900 x 650 mm with lot of tools.SCC control and positioning over monitor. Automatic central greasing. List of tools: base tools - 35,5 mm 48,28 mm 24,14 mm Perforation only with line: 48,28 mm round (big)- Ø35,5 mm 35,5 mm round (small) – Ø24,14 mm 48,28 x 40,53 mm shape of hart 48,28 mm with protection of romb 35,5 mm with protection romb Closed sizes: 48,28 x 24,14 mm 35,50 x 25,56 mm 35,50 x 29,82 mm Age: 1992 Machine tehnicaly controled/ checqued. Cleaned. With machine there is automatic delivery and jogger.
Machine Details Warehouse number 1105-03531 Machine Type Machining Center - Vertical Make DMG DECKEL-MAHO Type DMC 64 V linear Year of construction 2002 Control type CNC Storage location FRANCE Country of origin Germany Delivery time immediately Freight base from stock Technical details x-travel 640 mm y-travel 600 mm z-travel 500 mm Table size 850 x 600 mm Spindle holder ISO 40 Speed range 0 - 12000 rpm Rapid traverses - longitudinal/transverse/vertical 30 m/min Number of tool magazine slots 30 Information CNC control heidenhain tnc 530 30X SK 40 MAGAZINE ELECTRONIC HANDWHEEL MACHINE IN GOOD CONDITION WITH SPAENEFOERDERER
Pastry moulding machine Kalmeijer KGM biscuit moulding machine Pastry moulding machine Type: Kalmeijer KGM with 2 forming rollers 10 baking trays thickness of the dough figures is adjustable Dough hopper, forming roller, dough feed roller is easily removable for cleaning Easy to use The trasnport belts for the sheets can be folded in and out Machine requires little space Machines can be driven on rollers Dimensions: Height: 122cm Width: 170cm Depth: 52cm
PFM Flow wrapper Model: Tornado-BBLDSS Serial: C-6096 2001, Stainless, The Tornado LD is a horizontal flowrapping machine that produces up to 100 packs/min with hermetic seals from a flat reel of heat seal wrapping material. The Tornado LD is specifically designed for M.A.P.” (Modified Atmosphere Packaging). with smartdate X40 coder, infeed length 2400mm, flow wrapper length 3200mm, jaw width 220mm, various belt for infeed, 3Ph
Injection Unit Screw Diameter: Ø 50 Injection Volume: approx. 490 cm³ Injection Pressure: up to 1,800 bar Injection Rate: approx. 350 cm³/s Plasticizing Capacity: approx. 50 g/s (PS) Nozzle Contact Force: 65 kN Clamping Unit Clamping Force: 2,600 kN (260 t) Clamping System: ENGEL Victory tie-bar-less design Platen Size (H × V): approx. 1,000 × 950 mm Mould Opening Stroke: 600 mm Max. Daylight Opening: approx. 950 mm Min. Mould Height: 350 mm Ejector Stroke: 150 mm Ejector Force (fwd / back): 50 / 30 kN Drive & Control Drive Type: Hydraulic Hydraulic System Pressure: up to 160 bar Pump Motor Power: 22 kW Total Installed Power: approx. 30 kW Power Supply: 400 V / 50 Hz / 3-phase Control System: ENGEL CC300 touchscreen control Equipment / Features Clamping Concept: Tie-bar-less design for improved mould accessibility and com ...
aschinella details Warehouse number 1105-03533 Machine Type Machining Center - Vertical Make MAZAK Type VTC 20 B Year of construction 1996 Control type CNC Storage location FRANCE Country of origin Japan Delivery time immediately Freight base from location Price Technical details x-travel 1120 mm y-travel 510 mm z-travel 510 mm Tool changer 30 compartment Information Control Mazatrol M PLUS 1X 24 COMPARTMENT TOOL CHANGER SPAERNEFOEDERER With CNC control Mazatrol MPLUS , 24-fold tool changer, With CNC control Mazatrol M PLUS , ATC for 24 tools Technical data / technical details: Travel X / X-Travel 1120 mm Travel Y / Y-Travel 510 mm Travel Z / Z-Travel 510 mm Table size 1460x510 mm table load / max. workpiece weight 800 kg Tool shaft / spindle taper SK40 Speed range infinitely variable / spindle speed stepless 40-10000 rpm Number of tool places in ATC ...
Part Number 6338 TECHNICAL DATA - max width of the workpiece 230mm - max height of the workpiece 160mm 7 spindles: 1) horizontal bottom 230mm 5,5kW 2) vertical right 160mm 5,5kW 3) vertical left 160mm 5.5kW 4) horizontal top 230mm 7,5kW 5) horizontal upper 230mm 7,5kW 6) horizontal bottom 230mm 7,5kW 7) universal 360° 230mm 7,5kW - all spindles adjustable up/down, right/left - spindle diameter 40mm - all spindles equipped with a brake - spindle speed 6000rpm in advance: - 6 pulling, toothed, metal introductory shafts, including 2 double - 4 pulling shafts, rubber including 1 double - 3 clamps on the lead bottom: - pressure from the side on the inlet - introductory shaft, toothed, pulling, swivel in the lower table top - 3 pull rollers, metal, smooth - pneumatically adjustable shafts - length of the introductory table top 1190mm - central lubricati ...
maximum number of results exceeded
please refine your search
250 € 
