136,402 used machines on RESALE, but how to find them? Machine Search
Machine vise, sturdy vise, drill vise -Jaw width: 160 mm -Back height: 50 mm -Clamping depth: 150 mm -Dimensions: 425/240/H120 mm -Weight: 40 kg
Machine vise, sturdy vise, drill vise -Jaw width: 250 mm -Back height: 50 mm -Clamping depth: 270 mm -Dimensions: 640/440/H220 mm -Weight: 79 kg
Double head wire stitching machine Hohner Accord 25/40; good condition; cleaned and tested; Max. Stapling thickness 25mm with clamp slung and 40mm on both sides; 2 staple heads; Length bracket back 14mm. Double head wire stitching machine Hohner Accord 25/40; good condition; cleaned and checked; max.thikness 25mm or 40mm by both sides; 2 heads; lenght of clamp 14mm.
Kegelrundwirker W&P CR 59 -Bread dough Rundwirker Werner & Pfleiderer -Model CR 59 -with oiling -With Teflon Kegel -with hot air
Tool grinding machine, grinding machine, angle grinder, turning tool grinding machine, steel grinding machine -3x grinding wheels: Ø 340 mm, speed 1500 rpm -1x grinding wheel: Ø 170 mm, speed 3000 rpm -Max. steel cross-section: 80 x 80 mm -Dimensions: 1300/900/H1450 mm -Weight: 500 kg
Demonstration machine MVS1000 1 Decker New condition Our mobile screening machine designed for separation tasks in the outdoor area. The system can separate various types of material into two fractions, depending on the selection of mesh sizes, the degree of the sifted material can be adjusted. The two fractions are derived via the outlets of the screening machine in wheelbarrows, among other things. The stern must be removed for the removal of the fine material. The coarse material enters via a second slide directly into another wheelbarrow or into a suitable container. Ready to drive approx. 450Kg
Counter holder, counter bearing, bearing block, pillow block, bearing for milling machine -Dovetail: 168 by 224 mm, 42 mm high -Bore: Ø 58 mm -Drawing: in the photos -Dimensions: 390/115/H230 mm -Weight: 21 kg
Head circuit for OASE spiral kneaders of type SPK125/150/AE for spiral kneaders with soil emptying or center emptying
AVE Labelling Machine. 3 labels, Capacity: 6 - 7 000 b/h
Kosme Hot Melt Labeller Capacity 8 000 b/h
Double bench grinder, double grinding machine, pedestal grinder, bench grinder, drill grinding machine -Grinding disc: max. Ø 200 x 30 mm -Speed: 2800 rpm -Motor power: 0.74 kW -Operating voltage: 380 volts
Bending tool, die, upper knife, upper tool, straight tool, die tool, seam closing tool -Tool: for folding machine RAS Typ 74.30 -Dimensions: see the drawing in the photos -Distance recess rail: center center 650 mm -Dimension: 3060/28/H121 mm -Weight: 65kg
Collar cutting machine, trim, trim collar, shirt collar, shirt production, shirt, pneumatic, textile production, textile machine, garment production, garment production -Kannegiesser System: BRILKA -Kannegiesser: cut and twist collar. -pneumatic: foot switch -Dimensions: 520/900/H1190 mm -Weight: 33 kg
Machine vise base plate, clamping plate, vice plate, turntable -with: T- round groove -Grad display -Dimensions: 265/185/H50 mm -Weight: 4.4 kg
used
Qty. 1 Second-hand Sendzimir reversing cold rolling mill Mfc.: Waterbury Farrel Type: WZS- Reversing - Sendzimir Rolling Mill type: ZR – 23M – 31”, reversing Z”, 1 – 2 – 3 – 4 Built: 1977 Modernised in 1991 Capacity: approx. 50 000 T/annum Strip width: 370 – 740 mm Strip tension: controlled up to 10 Tons Thickness: Entry: 3.5 mm Exit: 0.20 mm Speed: 183 – 368 m/min. Min. exit thickness of material M70-A: 0.04 mm Last pass from 0.12 to 0.04 mm Qty. 1 Second-hand roll grinder Mfc.: Landis Type: L-28A Roll dia.: 40-100 mm Roll length: up to 1500 mm Qty. 15 Containers
MAZAK CO2 Laser Cutting Machine STX510 MKIII 4kW -made in Japan- ! SOFORT EINSATZBEREIT ! over-recovered, very well-preserved MAZAK laser machine with 4000W Panel size: 3000mm x 1500mm minimum set-up area of 2.9m x 7.3m Puncture sensor Plasma sensor Burning Sensor automatic nozzle change Small parts conveyor belt Ball roller table Fast-punching fully encapsulated machine cover Cast bed, no foundation needed FE: up to 20mm VA: up to 15mm ALMG: up to 10mm Plastic, wood cutable incl. CAD / CAM Software 2020 Version incl. 12 months warranty (within Dtl.) incl. delivery incl. commissioning + training Testing under electricity ready for delivery immediately immediately ready for use =optional with fully automatic loading and unloading MAZAK CELL=
Krones Canmatic labeling machine Capacity: 24,000 b / h
Modular station Krones Contiroll HS
Machine vise, sturdy vise, drill vise -Jaw width: 296 mm -Back height: 50 mm -Clamping range: 255 mm -Dimensions: 600/300/H155 mm -Weight: 89 kg
Flame cutting system, torch, oxyfuel cutting system -Shaft diameter: 30 mm -Shaft length: 220 mm (260 mm with socket) -Total length: 405 mm -for: 16 mm nozzle diameter -Weight: 1.3 kg
Machine vice, sturdy vice, drill press vice -Jaw width: 215 x 40 mm -Clamping depth: max. 240 mm -Tension: centric -Dimensions: 460/280/H135 mm -Weight: 35 kg
Table clamping area: 190 x 710 mm Table movement x: 390/360 mm Table movement y: 150 mm Table movement z: 280 mm Spindle holder: SK 40 Spindle speeds: 100 - 3100 rpm Feeds longitudinal 0 - 600 mm/min electr. Connection: 380 V, approx. 1.5 kW Space requirement: 1400 x 1200 x 1500 mm Weight: approx. 680 kg
STANZNIETZUFÜHRER Manufacturer: EM HART Teknologies (Tucker GmbH) Type: ERF230000/3 3x5
Machine vise, sturdy vise, drill vise -Jaw width: 160 x 45 mm -Clamping depth: max. 260 mm -Tension: centric -Dimensions: 590/200/H125 mm -Weight: 36 kg
Cup grinder, swivel arm grinder, carbide chipbreaker groove grinder, tool grinder, grinder, angle grinder, lathe tool grinder -Grinding head: swiveling -Clamping table: 410 x 410 mm -Magnetic disk Hitachi: 470 x 160 mm -Abrasive tool diameter: 90 mm -Dimensions: 1440/760/H1745 mm -Weight: 712 kg
Heavy-duty transport rollers, machine rollers, transport trolleys, heavy-duty trucks, armored rollers, machine transport rollers -Load capacity: 1000 kg -Type: 4567005 -Dimensions: 500/340 / H105 mm -Weight: 17 kg - only 1 piece available
Dowel drilling and drive-in machine Biesse type F/S Technical data: • Drill head: 21 spindles • Glue guns: 6
New machine! Max. Speed: 120 (Max. BPM.) Need to match the thickness of the film. Applicable Lable Thickness: 0.05 - 0.07 (m/m) Applicable Lable Lay Flat Width: 40 - 150 (m/m) Applicable Lable Cut Length: 25 - 50 (m/m) Air Pressure: 5.5 (80 psi) Applicable Products Shape: Round, Square, Oval & Others Applicable Material: PVC, PET, OPS, PLA Machine Dimension LхWхH: 1130 x 1000 x 1620 mm Power: 1Ø 220V 50/60HZ - HMI control system help worker operate machine & change size easily. - Single cutting knife cut shrink band without dog ear. - Shrink band apply to cap by sucker; it is good to work with wide cap container. - Single phase power is required, easy & convenient. - Door Interlocks safety feature protecting worker from injury.
Machine vise, sturdy vise, drill vise -Jaw width: 160 mm -Back height: 50 mm -Clamping depth: 110 mm -Dimensions: 460/165/H115 mm -Weight: 39 kg
capacity: up to 11,000 bottles/h suitable for 0.2 to 1.0 ltr. bottles year of manufacturing: 1990 partly dismantled for reconditioning
The machine is completely overhauled and is then as good as new! The machine gets a completely new electric satisam with our control system. Technical specifications Drilling process: ELB Number of drilling spindles: 1 Min. Drilling diameter 4 mm Max. Drilling diameter 30 mm Max. Drilling depth 600 mm with drilling diameter 4mm / with larger drilling diameters max. Drilling depth 1000 mm Max. Rapid traverse speed X + Z axis 4000 mm / min Max. Rapid traverse speed y-axis 2000 mm Travels X-axis horizontal approx. 700 mm Y-axis vertical approx. 300 mm Z axis designed for max. Drilling depth 1000 mm
Machine vice, sturdy vice, drill press vice -Jaw width: 160 x 50 mm -Clamping depth: max. 110 mm -Dimensions: 460/160/H120 mm -Weight: 36 kg
Machine vise, sturdy vise, drill vise -Jaw width: 160 x 60 mm -Clamping depth: max. 130 mm -Dimensions: 480/160/H135 mm -Weight: 38 kg
Machine vise, sturdy vise, drill vise -Jaw width: 160 mm -Back height: 45 mm -Clamping depth: 195 mm -Dimensions: 500/160/H135 mm -Weight: 30 kg
Top CONDITION - UEBERHOLT IN 2020 ! Built: 2007 Panel size: 3000 x 1500 x 100mm Power: 2500W Control: Mazatrol Preview with LAN / USB incl. cooler incl. linear drives on all axes incl. programming software incl. training incl. commissioning incl. rapid puncture incl. ball roller table incl. 4 fold head change magazine incl. 2 cutting heads incl. 10x automatic nozzle changer FE: up to 20mm VA: up to 12mm oxide-free designed for high-pressure cutting up to 20bar no foundation ! necessary Optional automatic loading and unloading by Mazak CELL510 is offered with delivery / warranty / commissioning / training always regularly serviced
Top CONDITION - UEBERHOLT IN 2020 ! Built: 2006 Panel size: 3000 x 1500 x 100mm Power: 2500W Control: Mazatrol Preview with LAN / USB incl. cooler incl. linear drives on all axes incl. programming software incl. training incl. commissioning incl. rapid puncture incl. ball roller table incl. 4 fold head change magazine incl. 2 cutting heads Bjgcgttd8s incl. 10x automatic nozzle changer FE: up to 20mm VA: up to 12mm oxide-free designed for high-pressure cutting up to 20bar no foundation ! necessary Optional automatic loading and unloading by Mazak CELL510 is offered with delivery / warranty / commissioning / training always regularly serviced
Fiber Laser Machine HLF Power: 4kW Sheet metal size: 3000 x 1500mm Alternating table Sheet metal layer detection Siemens touchscreen control with LAN/USB Siemens Drives Precitec Auto Focus Procutter Cutting Head THX Guided Tours IPG resonator with 4kW is included: Guarantee CAD CAM Software Commissioning Delivery within Dtl Training offered
Surface grinder, tool grinder, grinding machine, -Clamping table: 650 x 200 mm -x-axis: 650 mm -y-axis: adjustable 200 mm -max intermediate dimension: 350 mm -grinding wheels: Ø 150/max. 200 mm -Dimensions: 1300/1680/H1460 mm -Weight: 1080 kg
Tapping machine, pipe thread cutter -for: pipe size max. 2 inches -Speed: 72 rpm -Foot switch with: emergency stop function -Pipe cutter -Interior deburrer -Operating voltage: 220 volts -Dimensions: 1100/560/H1140 mm -Weight: 126 kg
Tapping machine, pipe thread cutter -without tools -Operating voltage: 220 volts -Dimensions: 830/530/H1080 mm -Weight: 64 kg
Machine vice, sturdy vice, drill press vice -Jaw width: 250/80 mm -Clamping depth: max. 300 mm -Dimensions: 610/250/H165 mm -Weight: 84 kg
Diosna spiral mixer Model: SP80 D Serial: 9611-2118 80kg stainless bowl, stainless dough hook, two speeds, two timers, 3Ph
2 heads, manually adjustable approx. 50 - 320 mm, foot switch, approx. 300 mm working depth
Measuring and control ring for control of three-point internal micrometers Diameter 50mm Diameter 100mm Diameter 150mm Diameter 200mm More available
Tool grinding machine, grinding machine, angle grinding machine, rotary steel grinding machine, steel grinding machine -Grinding places: 4 -Angle tables on swing tables: 3 -Angle table for chip breaker groove: 1 -Quantity: 1 piece available -Dimensions: 1210/1210/H1450 mm -Weight: 536 kg
maximum number of results exceeded
please refine your search
