mach 1 used for sale

CATALOG NO. 7240 TECHNICAL DATA - inlet width 400mm - inlet height 210mm - shaft width 530mm - shaft diameter 500mm - knife length 530mm - number of knives 2 pcs - sieve dimensions 55x50mm - 2 geared rollers pulling from the bottom - lower shaft motor approximately 3kW - toothed shaft pulling from above - upper shaft motor 1.5kW - length of the feed belt 4600mm - feed belt width 400mm - main engine 55kW - autoreverse - feeder dimensions length/width/height 4630x620x760mm - machine dimensions length/width/height 2510x1700x1200mm - weight approximately 3500 kg – German production – used chipper, very good condition The prices given are net prices. Net price given for international transactions, EX, customers from the EU with an EU Tax Identification Number. Current offer on our website. Net price: 85,900 PLN Net price: 19089 EUR depending on the price 4. ...

Product series: ACS550-01 Product main type: ACS550 Enclosure class: IP21 Invoice description: ACS550 ACS550-01-195A-4 Pn 110kW, I2n 195 A IP21 Motor: 110/90 kW EAN: 6410038058357

CATALOG NO. 7102 TECHNICAL DATA - inlet width 400mm - inlet height 180mm - shaft width 430mm - shaft diameter 430mm - knife length 430mm - number of knives 2 pcs - sieve dimensions 18x18mm - toothed shaft pulling from the bottom - lower shaft motor 0.75kW - toothed shaft pulling from above - upper shaft motor 0.75kW - belt feeder - feed belt length 3260mm - feed belt width 400mm - main engine 38kW - autoreverse - diameter of the exhaust pipe 250mm - total dimensions length/width/height 5200x1400x1870mm, - weight 2020kg – German production – autoreverse – used chipper, very good condition The prices given are net prices. Net price given for international transactions, EX, customers from the EU with an EU Tax Identification Number. Current offer on our website. Net price: 88900 PLN Net price: 19756 EUR depending on the price 4.50 EUR Net price: 233 ...

CATALOG NO. 7027 TECHNICAL DATA - inlet width 400mm - inlet height 200mm - shaft width 430mm - shaft diameter 430mm - knife length 430mm - number of knives 2 pcs - sieve dimensions 80x80mm - toothed shaft pulling from the bottom - lower shaft motor 1.5kW - toothed shaft pulling from above - upper shaft motor 1.5kW - belt feeder - length of the feed belt 5400mm - feed belt width 400mm - main engine 30kW - autoreverse, - reverse gear - machine dimensions length/width/height 2200x1450x1150mm - feeder dimensions length/width/height 5300x550x500mm - weight 1950kg – German production, – used chipper, very good condition The prices given are net prices. Net price given for international transactions, EX, customers from the EU with an EU Tax Identification Number. Current offer on our website. Net price: 78,900 PLN Net price: 17533 EUR depending on the price 4 ...

<b>Properties</b> Used belt of manufacturer TRANS standard <b>Technical data:</b> Mass of the belt conveyor Specification no.: U1009424-V0091 Nominal radius/inner radius: 600 mm Width: 900 mm Nominal angle/slope angle: 180Grad Strap type: KT96 Förderhöhendiff.: 500mm <b>Belt conveyors</b> The belt is ideal to dovetail machines or jobs in the picking zone and to optimize the internal process. Transportation can foster the belt conveyor sensitive and different-sized containers, boxes or other packaging and article units to the task or delivery point and, for example, also serves as a connecting route before or between production and Woodworking machines. Also enables efficient parts in operating and storage and is designed to promote significant flow rates and distances.

Ignition device MWM Deutz 12320994 Original - Suitable for MWM TCG 2020 ,TBG 620 engines - 12320994; 1232-0994; 1232 0994 - Successor: 12324320; 1232-4320; 1232 4320 - Deutz TEM-ZS2 - Please note! If you purchase this item at this price, we will ask for a defective ignition device in exchange for an exchange sale. The Onets Group, including KompoTec in Cologne, is available as an experienced partner for the overhaul of gas engines. Our extensive range of services ranges from the basic refurbishment of stationary gas engines and their components to repairs in line with current value. In addition, we offer rapid provision of replacement engines as well as the production of individual and small series of new units. We support service providers, plant manufacturers and operators in the field of combined heat and power plants (CHP) and combined heat and power (CHP) in a partners ...

<b>Properties</b> Used belt of manufacturer TRANS standard <b>Technical data:</b> Mass of the belt Specification no.: U1009424-V0520 Nominal radius/inner radius: 600 mm Width: 900 mm Nominal angle/slope angle: 180Grad Strap type: KT96 <b>Belt conveyors</b> The belt is ideal to dovetail machines or jobs in the picking zone and to optimize the internal process. Transportation can foster the belt conveyor sensitive and different-sized containers, boxes or other packaging and article units to the task or delivery point and, for example, also serves as a connecting route before or between production and Woodworking machines. Also enables efficient parts in operating and storage and is designed to promote significant flow rates and distances.

Ignition device MWM Deutz 12320993 Original - Price per ignition device! - Suitable for several engines such as MWM TCG 2020, TBG 620 engines - 12320993; 1232-0993; 1232 0993 - Successor: 12324319 ; 1232-4319 ; 1232 4319 - Deutz TEM-ZS3 - Please note! If you purchase this item at this price, we will ask for a defective ignition device in exchange for an exchange sale. The Onets Group, including KompoTec in Cologne, is available as an experienced partner for the overhaul of gas engines. Our extensive range of services ranges from the basic refurbishment of stationary gas engines and their components to repairs in line with current value. In addition, we offer rapid provision of replacement engines as well as the production of individual and small series of new units. We support service providers, plant manufacturers and operators in the field of combined heat and power pla ...

Bainite (India) model BMPX150 PIN type cold feed extruders, Year of manufacture 2013 Screw diameter: 150mm L/D ratio 16:1 Output: 1200 - 1500kg/hr Power roller feed (opening 175mm), provision for cooling, Screw speed: variable max 50rpm, Max operating pressure: 340bar (5000psi) 10 rows of 8 pins (80 total) With 210kW Siemens AC v/s motor through 28:1 reduction gearbox (service factor 1.75) Hinged extrusion head with C'clamp suitable for strip All mounted on a fabricated steel base Complete with electrical controls and VFD (Siemens make). Safety features as per European standards.

Qty 1 x Iddon 1320mm x 450mm dia wide 4 roll inverted L calender manual nip adjustment, even speed gears (1:1), cored rolls with rotary joints fitted, auto lubrication system with 45kW AC right angle drive variable speed motor and gearbox, fabricated bedplate. Complete with controls. Also available (if required): Sheet material unwind station (let off stand) Simple Cooling unit In-line cutter Accumulator rolls (wind up)

Air duct MWM 12307524 Original - Price per air duct! - Suitable for MWM TCG 2020 - TBD 620 - TBG 620 - AIR GUIDANCE CONDUITE D'AIR CONDUCTO DE AIRE The Onets Group, including KompoTec in Cologne, is available as an experienced partner for the overhaul of gas engines. Our extensive range of services ranges from the basic refurbishment of stationary gas engines and their components to repairs in line with current value. In addition, we offer rapid provision of replacement engines as well as the production of individual and small series of new units. We support service providers, plant manufacturers and operators in the field of combined heat and power plants (CHP) and combined heat and power (CHP) in a partnership-based, technically convincing and sustainable manner. Our extensive experience in engine repair, resulting from decades of serial production, flows into every new proj ...

Air duct MWM 12307522 Original - Price per air duct! - Suitable for MWM TCG 2020 - TBD 620 - TBG 620 - AIR GUIDANCE CONDUITE D'AIR CONDUCTO DE AIRE The Onets Group, including KompoTec in Cologne, is available as an experienced partner for the overhaul of gas engines. Our extensive range of services ranges from the basic refurbishment of stationary gas engines and their components to repairs in line with current value. In addition, we offer rapid provision of replacement engines as well as the production of individual and small series of new units. We support service providers, plant manufacturers and operators in the field of combined heat and power plants (CHP) and combined heat and power (CHP) in a partnership-based, technically convincing and sustainable manner. Our extensive experience in engine repair, resulting from decades of serial production, flows into every new proj ...

- Please note! Price per piece! - Suitable for TCG 2020 V12 - 12304116 The Onets Group, including KompoTec in Cologne, is available as an experienced partner for the overhaul of gas engines. Our extensive range of services ranges from the basic refurbishment of stationary gas engines and their components to repairs in line with current value. In addition, we offer rapid provision of replacement engines as well as the production of individual and small series of new units. We support service providers, plant manufacturers and operators in the field of combined heat and power plants (CHP) and combined heat and power (CHP) in a partnership-based, technically convincing and sustainable manner. Our extensive experience in engine repair, resulting from decades of serial production, flows into every new project. By constantly adapting and integrating new technologies and processes into  ...

- MWM Mixture Pipe - Please note! Price per piece! - 12141922 The Onets Group, including KompoTec in Cologne, is available as an experienced partner for the overhaul of gas engines. Our extensive range of services ranges from the basic refurbishment of stationary gas engines and their components to repairs in line with current value. In addition, we offer rapid provision of replacement engines as well as the production of individual and small series of new units. We support service providers, plant manufacturers and operators in the field of combined heat and power plants (CHP) and combined heat and power (CHP) in a partnership-based, technically convincing and sustainable manner. Our extensive experience in engine repair, resulting from decades of serial production, flows into every new project. By constantly adapting and integrating new technologies and processes into our opera ...

- Intake Elbow mixture line MWM 12300231 - Please note! Price per piece! - 12300231 The Onets Group, including KompoTec in Cologne, is available as an experienced partner for the overhaul of gas engines. Our extensive range of services ranges from the basic refurbishment of stationary gas engines and their components to repairs in line with current value. In addition, we offer rapid provision of replacement engines as well as the production of individual and small series of new units. We support service providers, plant manufacturers and operators in the field of combined heat and power plants (CHP) and combined heat and power (CHP) in a partnership-based, technically convincing and sustainable manner. Our extensive experience in engine repair, resulting from decades of serial production, flows into every new project. By constantly adapting and integrating new technologies and pr ...

- Compensator compensator MWM 12304761 - Please note! Price per piece! - 12304761 The Onets Group, including KompoTec in Cologne, is available as an experienced partner for the overhaul of gas engines. Our extensive range of services ranges from the basic refurbishment of stationary gas engines and their components to repairs in line with current value. In addition, we offer rapid provision of replacement engines as well as the production of individual and small series of new units. We support service providers, plant manufacturers and operators in the field of combined heat and power plants (CHP) and combined heat and power (CHP) in a partnership-based, technically convincing and sustainable manner. Our extensive experience in engine repair, resulting from decades of serial production, flows into every new project. By constantly adapting and integrating new technologies and proc ...

Seydelmann cutter 120 liter, type K 120 AC Completely made of special stainless steel 120-liter bowl made of stainless steel Frequency speed regulator 2 bowl speeds – fast and slow Knives speed frequent speed regulation (6 speed) Unloading device: left side Main cover is made of special steel, stainless steel Noise-canceling cover made of stainless steel Distribution cabinet made of special steel, inside the machine 6 pieces Knives Machine dimensions in cm: width: 190 depth: 150 height: 180 Main motor power: 40 kW Voltage: 400 V, 50 Hz Delivery time: 30 working days after advanced payment

We are looking urgently All diesel MTU 16V4000 generator or just motors to export Search for up to 6 plants in each execution

- Mixture Pipe Mixture Pipe MWM 12301431 Original - Suitable for several motors - Please note! Price per piece! - 12301431 The Onets Group, including KompoTec in Cologne, is available as an experienced partner for the overhaul of gas engines. Our extensive range of services ranges from the basic refurbishment of stationary gas engines and their components to repairs in line with current value. In addition, we offer rapid provision of replacement engines as well as the production of individual and small series of new units. We support service providers, plant manufacturers and operators in the field of combined heat and power plants (CHP) and combined heat and power (CHP) in a partnership-based, technically convincing and sustainable manner. Our extensive experience in engine repair, resulting from decades of serial production, flows into every new project. By constantly adapting ...

FESSMANN 1000 lit

- Compensator Compensator MWM 12301436 Original - Suitable for several motors - Please note! Price per piece! - 12301436 The Onets Group, including KompoTec in Cologne, is available as an experienced partner for the overhaul of gas engines. Our extensive range of services ranges from the basic refurbishment of stationary gas engines and their components to repairs in line with current value. In addition, we offer rapid provision of replacement engines as well as the production of individual and small series of new units. We support service providers, plant manufacturers and operators in the field of combined heat and power plants (CHP) and combined heat and power (CHP) in a partnership-based, technically convincing and sustainable manner. Our extensive experience in engine repair, resulting from decades of serial production, flows into every new project. By constantly adapting a ...

- Cover Lid MWM 12076227 Original - Suitable for several motors - Please note! Price per piece! - 12076227 The Onets Group, including KompoTec in Cologne, is available as an experienced partner for the overhaul of gas engines. Our extensive range of services ranges from the basic refurbishment of stationary gas engines and their components to repairs in line with current value. In addition, we offer rapid provision of replacement engines as well as the production of individual and small series of new units. We support service providers, plant manufacturers and operators in the field of combined heat and power plants (CHP) and combined heat and power (CHP) in a partnership-based, technically convincing and sustainable manner. Our extensive experience in engine repair, resulting from decades of serial production, flows into every new project. By constantly adapting and integrating ...

continuous grilling line all stainless steel adjustable product height with lower and upper belt : bottom and top grilling independent temperature control below and above net length 1.800 mm belt width 600 mm electrically heated ± 90 kW belt washing system above and below adjustable temperature range per heating plate (6 pieces) capacity up to 250 kg/h depending on the product adjustable speed dimensions (l x b x h): ± 3.000 x 1.650 x 2.400 mm

- Lubricat. oil pump oil pump MWM 12304041 - Suitable for several motors - Please note! Price per piece! - 12304041 The Onets Group, including KompoTec in Cologne, is available as an experienced partner for the overhaul of gas engines. Our extensive range of services ranges from the basic refurbishment of stationary gas engines and their components to repairs in line with current value. In addition, we offer rapid provision of replacement engines as well as the production of individual and small series of new units. We support service providers, plant manufacturers and operators in the field of combined heat and power plants (CHP) and combined heat and power (CHP) in a partnership-based, technically convincing and sustainable manner. Our extensive experience in engine repair, resulting from decades of serial production, flows into every new project. By constantly adapting and i ...

-Three-way cock MWM 12022945 - Suitable for several motors - Please note! Price per piece! - 1202 2945 The Onets Group, including KompoTec in Cologne, is available as an experienced partner for the overhaul of gas engines. Our extensive range of services ranges from the basic refurbishment of stationary gas engines and their components to repairs in line with current value. In addition, we offer rapid provision of replacement engines as well as the production of individual and small series of new units. We support service providers, plant manufacturers and operators in the field of combined heat and power plants (CHP) and combined heat and power (CHP) in a partnership-based, technically convincing and sustainable manner. Our extensive experience in engine repair, resulting from decades of serial production, flows into every new project. By constantly adapting and integrating new ...

- Inletpipe intake line MWM 12302410 - Suitable for several motors - Please note! Price per piece! - 12302410 The Onets Group, including KompoTec in Cologne, is available as an experienced partner for the overhaul of gas engines. Our extensive range of services ranges from the basic refurbishment of stationary gas engines and their components to repairs in line with current value. In addition, we offer rapid provision of replacement engines as well as the production of individual and small series of new units. We support service providers, plant manufacturers and operators in the field of combined heat and power plants (CHP) and combined heat and power (CHP) in a partnership-based, technically convincing and sustainable manner. Our extensive experience in engine repair, resulting from decades of serial production, flows into every new project. By constantly adapting and integra ...

- Pipe clamp / pipe clamp 12307351 & Strip / strip 12302221 MWM - Suitable for several motors - Please note! Price for pipe clamp and strip. Can also be delivered separately on REQUEST. - 12307351 & 12302221 The Onets Group, including KompoTec in Cologne, is available as an experienced partner for the overhaul of gas engines. Our extensive range of services ranges from the basic refurbishment of stationary gas engines and their components to repairs in line with current value. In addition, we offer rapid provision of replacement engines as well as the production of individual and small series of new units. We support service providers, plant manufacturers and operators in the field of combined heat and power plants (CHP) and combined heat and power (CHP) in a partnership-based, technically convincing and sustainable manner. Our extensive experience in engine repair, resulting f ...

Stack lifter Hunkeler AS 1000; Format 800x1200mm; Carrying capacity 1000kg; Hand or foot operation; Checks for function. Pile lift hunkeler AS 1000; size 800x1200mm; lift capacity 1000kg; Hand or foot switch; checked on function.

- Tube Bundle 12276572 MWM - Suitable for several motors - Please note! Price per piece! The Onets Group, including KompoTec in Cologne, is available as an experienced partner for the overhaul of gas engines. Our extensive range of services ranges from the basic refurbishment of stationary gas engines and their components to repairs in line with current value. In addition, we offer rapid provision of replacement engines as well as the production of individual and small series of new units. We support service providers, plant manufacturers and operators in the field of combined heat and power plants (CHP) and combined heat and power (CHP) in a partnership-based, technically convincing and sustainable manner. Our extensive experience in engine repair, resulting from decades of serial production, flows into every new project. By constantly adapting and integrating new technologies a ...

- Connecting Rod Connecting Rod MWM 12341310 - Suitable for several motors - Please note! Price per piece! - 12341310 The Onets Group, including KompoTec in Cologne, is available as an experienced partner for the overhaul of gas engines. Our extensive range of services ranges from the basic refurbishment of stationary gas engines and their components to repairs in line with current value. In addition, we offer rapid provision of replacement engines as well as the production of individual and small series of new units. We support service providers, plant manufacturers and operators in the field of combined heat and power plants (CHP) and combined heat and power (CHP) in a partnership-based, technically convincing and sustainable manner. Our extensive experience in engine repair, resulting from decades of serial production, flows into every new project. By constantly adapting and  ...

- Toothed gear MWM 12300502 - Suitable for several motors - Please note! Price per piece! - 12300502 The Onets Group, including KompoTec in Cologne, is available as an experienced partner for the overhaul of gas engines. Our extensive range of services ranges from the basic refurbishment of stationary gas engines and their components to repairs in line with current value. In addition, we offer rapid provision of replacement engines as well as the production of individual and small series of new units. We support service providers, plant manufacturers and operators in the field of combined heat and power plants (CHP) and combined heat and power (CHP) in a partnership-based, technically convincing and sustainable manner. Our extensive experience in engine repair, resulting from decades of serial production, flows into every new project. By constantly adapting and integrating new  ...

- Stop ring inrun ring MWM 12302113 - Suitable for several motors - Please note! Price per piece! - 12302113 The Onets Group, including KompoTec in Cologne, is available as an experienced partner for the overhaul of gas engines. Our extensive range of services ranges from the basic refurbishment of stationary gas engines and their components to repairs in line with current value. In addition, we offer rapid provision of replacement engines as well as the production of individual and small series of new units. We support service providers, plant manufacturers and operators in the field of combined heat and power plants (CHP) and combined heat and power (CHP) in a partnership-based, technically convincing and sustainable manner. Our extensive experience in engine repair, resulting from decades of serial production, flows into every new project. By constantly adapting and integrat ...

- Retaining plate MWM 12300186 - Suitable for several motors - Please note! Price per piece! - 12300186 The Onets Group, including KompoTec in Cologne, is available as an experienced partner for the overhaul of gas engines. Our extensive range of services ranges from the basic refurbishment of stationary gas engines and their components to repairs in line with current value. In addition, we offer rapid provision of replacement engines as well as the production of individual and small series of new units. We support service providers, plant manufacturers and operators in the field of combined heat and power plants (CHP) and combined heat and power (CHP) in a partnership-based, technically convincing and sustainable manner. Our extensive experience in engine repair, resulting from decades of serial production, flows into every new project. By constantly adapting and integrating ne ...

We sell large post steel pipes DN 1000 encased, coated inside, wall thickness 14.8 mm, very good condition. Lengths between 4-18m.

High speed mixer granulator Aeromatic PMA 1800 Gross volume 1800 Lt. Normal working volume 1500 Lt. Average granulated batch weight 825 Kg Impeller speeds 59/118 rpm Impeller motor capacities 60/75 kW Granulator speeds 1500/3000 rpm Granulator motor capacity 7.5/11 kW

GRONINGER LIQUID FILLING LINE FILLING AND CLOSING MACHINE DFVK 6000 - STOPPERING MACHINE KVK 108B Anno di costruzione: 2002 Output: 12,000 per hour (200 per min), based on 3ml vial, 1ml fill Filling range: 0,2 ml- 135 ml (equipped with according pumps) Diameter range: 14-35 mm Height: 30-100 mm PLC: Siemens PLC type S7 300 Guarding: Stainless steel frame with safety glass The vial filling and closing line is capable of running in the following ways: - Fill and half-stopper a batch for freeze-drying - Overseal a stoppered batch from after freeze drying process - Fill, stopper and overseal a liquid batch Line under ORABS - Open Restricted Access Barrier System​. Full set of operation manuals and technical documentation. Various spare parts.

Manitou Mod. MRT 1432 HOURS: 670 YEAR: 2004

MANITOU MVT 1330 SL HOURS: 5,242 YEAR: 2001

YEAR: 2000 COMPLETE OF SEMITRAILER PIACENZA

Made in Italy Peak: 300 mm Rotary diameter over bed: 600 mm Rotary diameter via sled: 380 mm Peak: 1,500 mm Bed width: 400 mm Spindle bore: 82 mm Spindle nose: Camlock 8 " Spindle speeds: (12) 16-1200 U/min Engine power: 9.2 kW (special equipment/standard: 7.5 kW) Reprimor Z-axis: (93) 0.028-6.43 mm/U Feed X-axis: (93) 0.012-2.73 mm/U Thread, metric: (54) 0.5-224 mm Threads, Witworth: (55) 72-1/4 x8 TPI Thread, module: (54) 0.5-112 mm Threads, Diametral Pitch: (54) 64 -1/4 D.P. Crossleigh hub: 340 mm Oberslitten hub: 150 mm Riding stock pinol diameter: 85 mm Riding stove pinol stroke: 200 mm Ridstock cone: MK 5 Weight: About 3,200 kg Facilities: -3-axis digital display -Step-by-step speed adjustment -Automatic lubrication of the management railways -LED lighting -Micrometer bed strike -9.2 kW engine instead of 7.5 kW -Quick change holder system mul ...

Technical data for the crate rack: Shelving system: SSI Schaefer Type: R3000 Technical data for the installation: Number of rows of shelves: 01 pcs. Shelf length: approx. 1,056 mm Number of shelves / row of shelves: 01 pcs. á 994 mm Number of levels plus floor level: 07 pcs. The scope of delivery includes: 02x Shelf Stand, Choice II Material colour: sendzimir galvanized Frame profile dimensions: 31 x 60 mm incl. transverse and diagonal struts The stands are unassembled 1,534 mm high 300 mm deep 07x shelves, second choice Material colour: light silver lacquered Type designation: ZB4313L Dimensions: 994 x 300 x 30 mm Weight / piece: approx. 2.64 kg max. load per floor at Evenly distributed load: 100 kg 01x Cross Association, Second Choice Type designation: KV31013 Material colour: sendzimir galvanized  ...

Qty. 1 Second-hand cold rolling mill Mfc.: MCC, ABB, IMS Type: 6-Hi Cold Rolling Mill Built: 2009 Stopped: 2017 Annual capacity: 220,000 Ton/Year Annual running time (Hour): 6480 Strip Width: 800~1250 mm Thickness Entry: 1.5~3.5 mm Exit: 0.2 – 1.2 mm De-Coiler OD: 1000~2000 mm De-Coil ID: 610 mm De-Coil Weight: Max. 25 T Coil OD: 1000~2000 mm Coil ID: 610 mm Coil Weight: Max. 25 T Mill Max Speed: 1300 m/min Threading Speed: 30 m/min Main Drive Controller (3300 VAC) Mfc.: ABB ACS6000 Variable Speed Variable Voltage Xray Gauge Mfc.: IMS Germany Automation Siemens PLC/Wincc

; Gross weight [kg]: 532; Engine: Caterpillar C1.5; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger; Water Tank Volume [l]: 55

Qty. 1 Second-hand billet foundry plant Mfc.: Cometal SA Built: 1989-2008 Stopped: 2014 Billet size: Dia. 145 – 152 – 178 – 203 – 228 – 254 mm Length: 7.0 m Tolerances: Dia. + 0, -2 mm Length: +/- 30 mm Deflection: 2 mm per 1000 mm

2pcs 3250 x 1885 x 400 mm

Skoda W 160 H/NR CNC Travel x= 14.500mm (bed is for the travel 18,500mm) Travel Y= 3.150mm Travel Z= 1.600mm Travel W= 1.250mm Spindle diameter 160mm Machine with ball screw Many accessories available: CNC control Siemens SINUMERIC 850 Rotary table ISO 16 2.200 x 2.200mm, capacity 16 ton included Chip conweyor : 19.000 mm + 12.000 mm Floor plates

6 pcs 6400 x 1885 x 400 mm

Cutting sets and moving in snails Suitable for Stephan Machines

Air-operated airless pump on pump trolley The T2001 piston pumps are robustly designed air-driven airless pumps designed for pumping, decanting and painting with multiple guns. The parts that come into contact with the material are made of stainless steel, carbide, PTFE or PE.  An ATEX approval for use in potentially explosive atmospheres completes the picture and makes the pumps versatile. Below you will find the advantages at a glance: - Minimal pulsation for uniform material flow during conveying and spraying - Versatile use due to stainless steel, carbide, PTFE or PE in the material area - Suitable for liquid solvents and water-based materials - Easy commissioning due to self-priming system - Maintenance-free device, no lubrication required - Integrated safety valve in accordance with accident prevention regulations - Mobile versions on pump trolleys - ATEX approval E ...

90 Degree Curve / Curve / Conveyor / Conveyor Belt Manufacturer: Transnorm Type / Model: 1500-80 Belt Type: KT58 Condition: Used Total length outside: approx. 1750 mm Total length inside: approx. 770 mm Total width incl. motor: approx. 730 mm Total width without motor: approx. 600 mm Conveyor width/ belt width: approx. 500 mm Strap Type: Smooth Material: Aluminum/ Steel Including SEW motor (0.37 KW) Stock: 2 pieces Price per piece The conveyor system has run until it was dismantled. Condition: fully functional, with signs of wear Ideal for fast material transport Expertly dismantled and packaged Thanks to the excellent workmanship of the conveyor technology, your material glides smoothly to its destination, even under high loads. Tailor-made solutions for your intralogistics We are your competent partner for roller conveyors, belt conveyors, inclined convey ...