mach 1 used for sale

Type: ZSA 1500 Working width: 1500 mm Flight circle metering drum: Ø 1600 mm Motor power: 18,5 kW Length metering device: 7800 mm Width metering device: 1600 mm Volume metering device: approx. 25 m ³

Infeed width: 720 mm infeed height: 330 mm rotor flight circle: 1000 mm number of cutting knives: 2 piece number of counter knives: 1 piece infeed: 2 x 3 rolls motor power: 110 kW screen perforation: Ø 30 mm machine weight: ca 7,800 kg

Make: Küba Type: CAV N10-1X1B Pipe capacity: 0.1 litres Price on request

4 pcs 5600 x 1885 x 400 mm price 10500eur/pc

Air filter

Ladies and gentlemen, we continuously buy all diesel generator sets with the following drive diesel engines: MTU 12V4000 16V4000 18V4000 20V4000 1000 KW to 3000KW. Caterpillar CAT 3512B ,3516B, 3512C,3516C 1000 KW to 3000KW. also all generator sets VOLVO,SCANIA,CUMINS,PERKINS from 500KW diesel, up to 20years old and maximum 12000 hours. If you have any questions don't hesitate to ask. Yours sincerely / Best regards Mr. Serhan Managing Director - Owner Company M&S EXPORT Lippstadt Ostenfeldmark 17 Industrial estate on the moonlight 59557 Lippstadt Owner: Mohamed Mousa Serhan Turnover Tax No.: DE 255543367 Phone: 02941 / 96 77 818 Fax: 02941 / 96 77 832 Mobile: 0172 / 72 653 24 Email: Transformatoren@gmx.de Homepage: abc. MS-EXPORT

Force of pressure: 150 t working width: 4300 mm clear stand width: 3600 mm stand projection: 300 mm maximum height: approx. 500/700 mm operating speed: up / down 41 - 65/10 mm / sec back gauge: 1000 mm Electr. Supply: 400 V, approx. 15 kVA kW weight: 14 t space: 4600 x 1950 x 3100 mm

Beer tanks / fermentation tanks and storage tanks 118.700 Liter Brand new cylindroconical Beer tanks / fermentation tanks and storage tanks designed for installation in stainless steel V2A room, WSt 1.4301 IIIc Capacity: 118.700 Liter Total content approx. 118.700 ltr. Net content of fermented about 87,700 liters. Inner diameter about 3,900 mm Outer diameter approx. 4,100 mm Cyl. Height about 8,500 mm Eaves height approx. 13,500 mm Total height approx. 14,100 mm Ground clearance: 1,280 mm Perm. Operating pressure: 1 bar Perm. Operating temperature: 40 ° C Perm. spec. Weight: 1.05 kg / dm³ Cooling jacket: Cooling zones on the cylinder approx. 4 x 16.5 m² (total approx. 66 m²) Cooling zone cone approx. 10.5 m² Perm. Operating pressure: 4 bar Perm. Operating temperature: -10/40 ° C Insulation thickness: 100 mm Material: Cr-Ni steel, WSt. ...

Powershift gearbox ex Hakotrac 1800 DA due to fire damage, axle and PTO gearbox not complete, untested, housing damaged, according to Fig. Missing parts such as diff.lock and PTO shaft from gearbox ex 2250 DA and other used parts such as lamella coupling, differential, axle shafts, power lifter, Yanmar diesel engine, radiator etc. available - see sample photos. Info and offers on request. We do not send package offers, no lists and do not respond to anonymous messages - please provide full name and place of residence as well as telephone number for inquiries. Please be happy to receive advice by phone in advance. For viewing appointment sat is required! ------ Jodau Municipal, Environmental & Green Care Technology ------- Used machines for plant & sports field maintenance, gardening & landscaping, cemetery technology & winter service, sweeping & disposal, env ...

Compressor Bitzer 4VES-10Y-40P

Make: RC GROUP Type: 142.F2 C7 Power: 140 kW refrigerant: R407C Built: 2000 2 pcs. compressor DWM Copeland semi-hermetic a 30 hp electric. Performance Compressor type: D4DJ300X Price on request

Plate filter Schenk Type Niro 1000 in V2A Capacity: 10.000 Liter/h for beer Capacity: 10.000 Liter /h Factory No. 154 Type Niro 1000 Year of construction 1996 Oper. Pressure: 8 bar Oper. Temperature: 115 °C Operating instructions available! with 70 Stainless steel plates hydraulic contact pressure with spar support with sight glass fittings with pressure fittings with manometer with Input / output valves with vent valve with Flow meter v. Sigrist Electrical Protection: IP 54 Voltage: 230/400 V – 50Hz Power: 1,5 kW Filter connections: Filtrate – inlet: threaded connector DN 80/100 DIN 11851, material 1.4301 Filtrate-outlet: threaded connector DN 80/100 DIN 11851, material 1.4301 Emptying: DN 40 DIN 11851 thread material 4.4301 Vent: angle valve R1/4‘‘-DN8; material 1.4571 / PTFE Filter pl ...

Working width: 2000 mm rotor flight circle: Ø 1000 mm drive: up to 315 kW cutting system: 40 piece cutting bars facilities: counter knife traverse pivoting hydraulically Right-left operation Hydraulic hood opening Screen: hydraulically extendible

HOT IRON OSCILLATING SAW & OIL HYDRAULIC FEEDING CONTROL SYSTEM

Qty. 1 Second-hand cut-to-length line Mfc.: FIMI, SSW Type: Multiblanks line 1850x2.5 Built: 1995 Stopped: Strip width: 300 – 1850 mm Thickness: 0.3 – 2.5 mm Length: 300-8000 mm Line speed: 85 m/min. Coil weight: 22.5 T Scope of supply: 1. Load coil 25 ton 2. Coils centering 3. 25 ton unwind rod 4. Wire guide photocell 5. Table introduction aprirotolo 6. Group introduction 7. Cutter fly shear 8. 6° FIMI straightener 9. Apply film 10. Circular shear 11. Deceleration/Connection table 12. Wrap waste 13. Ansa passage table 14. Measurement wheel 15. Unique rotary shear 16. First evacuation conveyor 17. Second conveyor for evacuation 18. Scrap unit 19. Autom. wagon for pallet insertion 20. Stacker with palette and air breath 21. Evacuation chain with weight and semi-automatic strapping machine 22. Second evacuation chain 23. Hydraulic units 24. Electrical pan ...

Prismatic column drill. Drilling capacity: 60mm. Table: 700x600mm. Vertical travel: 800mm. Taper Morse 4. Speeds: 9. (50-1.084) Motor power: 7,5cv.

Prismatic column drill. Ready for automatic drill of flanges, rounds... Drilling capacity: 70mm. Spindle pneumatic work cycle. Indexing table. Chip conveyor. Working area guarding. Year: 1998.

Swing mill for iron-free grinding or micronizing of chisels (solid sum content 70 - 78%), grinding chamber lined rubber, drive 22 kW. Task size: Up to 5 mm; final fineness: 4 microns. Last used grinding body: 7.5 to. Cylpebs, 20 mm x 20 mm (not included).

Diesel engine industry interest as a complete gene set very good condition over BRA on rapeseed oil 6900 with Leroy Somer generator for sale. If intrested the genset as a complete CHP incl. heat exchangers can be ordered all components year 2009 CHP manufacturer was the company Würz energy GmbH

Iddon HRX 4.5? (120mm) Cold Feed Rubber Extruder Year 1994 LD ratio 17:1 Bostock & Bramley Gearbox ABB Motor: 1994, 95kW, 1870 rpm, 419 amps, 360 volts With 1 x spare vacuum screw With Control Panel

Description: Design : Casting resin transformer Design: Dry Make : SGB Built: 2010 Condition : new Rated power: 1000 KVA Overvoltage: 10 KV +- 2 x 2.5% Undervoltage: 400 V Switching group: Dd6y 5 Frequency: 50 Hz Cooling type: AN Total weight: 2410 Kg If you have any questions don't hesitate to ask. Yours sincerely / Best regards Mr. Serhan Managing Director - Owner Company M&S EXPORT Lippstadt Ostenfeldmark 17 Industrial estate on the moonlight 59557 Lippstadt Owner: M. Mousa Serhan Turnover Tax No.: DE 255543367 Phone: 02941 / 96 77 818 Fax: 02941 / 96 77 832 Mobile: 0172 / 72 653 24 Email: Transformatoren@gmx.de

Carrier 19XR7070LF475, Centrifugal Chiller Year 2009, 300 h run hours , 3100KW/1000ton cooling capacity, turbo compressor, Siemens soft starter, R134a, high efficient machine, 400V 50 Hz, Commissioning and service, for sell, for rent, for contracting, world-wide, ready for shipping

Francis Shaw Extruder Screw diam. 100mm (4?) LD ratio 10:1 Roller Feed Brush DC Motor 100HP motor 1500rpm 460 volts Variable speed drive Complete with Control Panel

Eurolux beer tanks / fermentation tanks made of V2A with cone bottom, Test pressure: 1.5 bar, operating pressure: 0.99 bar with cooling jacket - capacity: 1500 litres New Material: V2A (AISI 304) 1.4301 Topsoil: with manhole with 6 screws with 1 x threaded welding nozzle DN 50 with 1 x overpressure valve with 1 x CO2 valve Cylinder tank: Cooling jacket 1000 mm wide with connection 1" AG input and 1 1/4" AG output Underbody: can be underrun with lifting scales and forklifts with residual outlet with forward-drawn outlet pipe, tank flush threaded nozzle DN 50, according to DIN 11851 with cone floor 120 Dimensions and weight: DxH: 1150 x 2400 mm Zyl. Height: 1500 mm Weight: 165 kg On request with: (extra charge - price on request): Fermentation sprout connection DN 50 Tasting tap DN 15 Fermentation s ...

1 x BUZULUK 1920mm wide Four-roll 'L' calender - Type: 03506 - Rolls dia 710x1920 mm - Year of manufacture: 1989 - Peripherally drilled rolls - High pressure hot water heating (Steam 1.6 and 3.2 MPa) - Motorised nip adjustment to rolls 1, 2 and 4 (30mm adjustment) - Cross axis on roll 3 (0-30mm) - Roller Bearings - Unidrive gearbox with DC motor to each roll - Rolls 1 and 4: 46 kW - Rolls 2 and 3: 77 kW - Working speed of 4th roll max 60m/min In very good condition.

Qty. 1 Second-hand continuous galvanising line Mfc.: Koryo SanGi, WMS Co., Sumitomo, Dongyang GiGong, Myungshin Mach., Kanto TK, Hitachi, Yuyoung Industry, Cosmo Gas, Hankuk Yugong, Jungwon Mach., Bugong Ind., Hanhyung Industry, SeunJin Mach., Cheongsong Electrics, Jungbu Civil Gas, HK. ENG, Cosmo Construction, KyungJin Construction, Cheonsu Hwankyung Ind., Shinhyeung Built: 1983 Some revamp in 2005 Material: Cold Rolled mild steel FH Strip Width: 650 - 1.250 mm Thickness: 0.2 -1.6 mm Capacity: REF: 27 Ton / Zn 1.2 Ton = 1 Hour HMI Main Control Operation system Zn Coating Wf 80 gm – 220 gm (Both Side) Coil Out Diameter: 2.050 mm Line Speed Max: 150 m/min Entry Section: 195 m/min Process Section: Max. 150 m/min Exit Speed Max.: 195 m/min

The Jabsco 15780-0000 is a Cummins bronze Flexible Impeller engine cooling pump with a Flanged Ports, bare shafted pump only. This is a Marine diesel engine cooling pump for Cummins engine models K38 / K50 / KTA38 / KTA50. It is the same pump as Cummins engine part 3393018 / 4314820 / 4314522. Features : Pump Body:Bronze Port Size:Ports are Flanged Product Specs : Flow up to 400 GPM. Constructed from marine quality bronze and stainless steel. Easy to service and maintain. Excellent self-priming even from dry start-up. Unaffected by small solid contaminants. Engineered to high standards. High-grade design delivers extended lifespan.

Dosing scale with precision spiral screw feeder in stainless steel version, with pre-container and weighing frame in frame, trough dimensions: 540 mm long x 370 mm wide x 320 mm high, with large loosening spiral in the trough, drive 0.47 kW via timing belt and Reduction gearbox, discharge pipe diameter: 50 mm.

Maximum force: 1600 tons Slider stroke length: 400 mm Unattainable-course: 12 mm Number of courses of a slider per minute: 16 Number of single turn-on: 12 The closed height: 870 mm Adjustment: 220 mm Under-forginig plate: -From left to right: 1600 mm -From front to rear: 1600 mm -Thickness: 650 mm Slider overall dimensions: 1600x1600 mm Aperture in a table: 1000x1000 mm window dimensions in cheeks: 1650x1650 mm Course of a rigid pusher in a slider: 100 mm Force of a rigid pusher in a slider ton-force: 80 Main electric motor power: 110 kW Course of pneumatic pillow: 160 mm Force of pushing out of a pneumatic pillow ton-force: 71 Hydropneumatic pillow: -Working course: 250 mm -Force of pushing out ton-force: 25 -Force of a clip ton-force: 250 Press overall dimensions: 4670x4670x8110 mm Press weight: 140 tons

Inclined lift with motorized winch (7.5 kW / 36 UPM), lifting bucket (1,000 l. usable volume), weighing frame / foot station (2,000 kg max.), 25 m rope and head station for material transfer. Rope and SEW winch drive are new; Elevator was used to feed an Eirich intensive mixer type R(V) 18. Technical documentation is available.

Plant: second-hand mobile Chamber filter press Type: Rittershaus & Baldwin AEHIS 1200 Year of construction: 1991 Filter plates sizes: 1200 x 1200 mm Number of plates: filter plates: PP Thickness: Expiration: closed Filter cloths: optionally available in voting on the medium Filter surface: approx. m ² Presses contents: approx. 3000 dm3 Filter pressure: 15 PSI Closing pressure: approx. 380-410 bar Plate transport: automatically Hydraulic power pack: Condition good Cylinder: no leaks, Rod blank-good condition Eccentric screw pump: as before priming pump Eccentric pump: EH2 type Bornemann 1900 Piston diaphragm pump: a pump Piston diaphragm pump: Type SP535N, Emmerich Wear parts: piston diaphragm pump replaced (proof of purchase. E installation: 2007 full service check (proof of purchase. Electrical connection: 125 amp input. Electrical connection: various outputs for external devices i ...

Item number 1334989-0101 Level Sonde for TBA 21 aseptic filling machine

KTA 19 M3 600 HP / 1800 RPM sn 37169226

2 pieces

4 radios incl. accessories

Diosna W 120 A with 4 boilers -completely overhauled -New bearings, new belts, new switch, new buttons, new friction, etc. -2 speed -2 Watch -2 edelsthal boiler -For 120kg dough without VAT Export prices!

High pressure - piston pump Flow water pump Manufacturer: UDOR Type: GAMMA 162 TS 1C. Detailed information on the manufacturers page, see pictures. Condition: Used, fully functional Scope of delivery: see the pictures.

Liebherr batch mixer Content 750 LTR With 30kw electric motor

Schorch electric motor three-phase motor, electric motor Type: 355S power: 250kw Speed: 1490upm Shaft diameter: 80mm Design B3 Protection type IP44 Weight 1550 kg used, but in very good condition.

E engine Three-phase asynchronous motor Manufacturer: VEM Model: K21R 315 MX4 Power: 160kw Supply: 400 V Revolutions: 1480/min Weight: 1000kg NEW, original box, unused from old stock for further details please refer to the pictures.

Qty. 1 Second-hand continuous galvanising line Mfc.: POSCO Built: 1997 Capacity: approx. 100 000 per annum Strip width: 720 – 1250 mm Thickness: 0.2 – 1.6 mm De-Coiler ID 508 mm OD 2000 mm Weight: 20 Tons Finished product: Coil Strip width: 720-1250 mm Thickness: 0.2-1.6 mm ID 508 mm OD 1600 mm Weight: 10 Tons Sheet Strip width: 720-1250 mm Thickness: 0.2-1.6 mm Weight: 3 Tons Line speed Entry section: max. 150 m/min. Process section: max. 120 m/min. Exit section: Coiling max. 150 m/min. Shearing max. 100 m/min. Threading speed: 20 m/min. Coating method Both sides coating, Regular spangle Coating weight 120-500 g/m² based on both sides Post treatment Chromating Electricity High voltage 10 kV Low voltage 380 V AC, 3 ph., 50 Hz, 220 V AC, 1 ph. Water Pressure min. 3 kg/cm² Steam Pressure min. 5 kg/cm² Temperature min. 158 °C Production process Coil s ...

Mixing system on steel construction with ring trogm (150 l. useful filling, 5.5 kW drive, 0.55 kW motorized outlet), bucket lift (1.5 kW drive, incl. winch, rope and rails) and control cabinet. Hardly used after revision, very good condition.

Wolfking Belham Multi needle injector Model:B1-15S Serial:8207-01303 120 needles, walking bed product advancement,

Laska angle grinder WW 130, 130 mm, 1-speed grinder, frozen meat version, all stainless steel, ergonomic control, saftey cover for cutting set hinged and electrically interlocked, saftey grid for hopper. The machine is immediately available and can be tested in Koblenz, Germany.

Formaco meat former press Model: FLL800/160/1 Serial: 1100 2002, Stainless, Meat former press

We offer from stock Zeven-Germany: Refurbished replacement engine Lombardini LDW1404,full version. Engine is without intake manifolds, starters, Lima, oil pan. 12 months warranty MIW GmbH Motoren-Instandsetzungs-Werk Nord-West-Ring 8 D-27404 Zeven-Germany Phone: 0049 (0) 4281-950583 Fax : 0049 (0) 4281-950585 E-Mail: info@miw-zeven.de abc..miw-zeven.de

NIP adjustment screw with more grooves

Bull gear

Refurbished replacement engine Lombardini LDW1404. Hull version without starters, Lima, flywheel, intake manifold, oil pan Warranty: 12 months MIW GmbH Motoren-Instandsetzungs-Werk Nord-West-Ring 8 D-27404 Zeven-Germany Tel: 0049 (0) 4281-950583 Fax: 0049 (0) 4281-950585 Email: info@miw-zeven.de abc.miw-zeven.de

UHDE adjustable Feeder, vibrating. Lxw = 1200x600mm Capaciteit 80 m3/h Adjustable from 0% to 100% With magnetic vibrator UHDE MA220 380Volt 16Amp 50 Hz IP54 And new thyristor control.