mach 1 used for sale

Discus level sanding machine with Vertikaler-Schleifspindel and Schleifradaufnahme f?r Ceramische-Schleifsegmente. Construction year 1957 the machine is technical and geometrically in very good state. it was waited up to Au?erbetriebsetzung 2006 regelmig. hydraulic table impulse: infinitely variable adjustably vertical delivery: hydraulically Schleifrad-Durchme?er: 600 mms impulse achievement: 22 kW Magnetabme?ung: 300 x 1,000 mms Schleiftischabme?ung: 400 x 1,700 mms

Water-cooled grinding spindle motor for JUNKER Quickpiont 13.5 kW ,380/660 V ,25/14.5 A ,2940 rpm ,50 HZ

Central cylinder 8 colors Chambered doctor blade etc.

8 colors

Power: 150 kVA / kW 120 Diesel engine / type: DEUTZ / BF6M1015 Cylinder: V 6 Cooling: liquid-cooled Generator / type: SIEMENS / 1FC2-282 Voltage: 400 / 231 V or 415 / 240 V Frequency: 50 Hz Speed: 1500 rpm Type: mobile complete unit with the silencer hood on dual trailer vehicle, dual circuit compressed air brake system Tank: approx. 450 litres Switchgear / Starter: Automatic start-stop for mains replacement Battery voltage / capacity: 24 V / 2 x 143 Ah Generator switch: Yes Accessories: Sockets 220 V / 400 V, spare wheel Dimensions (L X W X H): approx. 6000 X 2200 X 3300 mm Weight: approx. 8000kg

Cat. No. 07-1268 in very good condition Type SEP 100.1 Design: H1 PO1 Dimensions: Length: 143 cm Width: 56 cm Height: 143 cm Capacity: 60 litres/min., 3600 l/h Pressure: 6 bar Engine power: 4 kW DN 65 For inquiries: Tel: 09353 90905-0 or Fax: 09353 90905-22 Mobile: 0171 651 82 48 On request, we will be happy to send you our complete catalogue. Sightseeing is also possible in the evening and on weekends by appointment. All prices are ex works plus law VAT Intermediate sale reserved! Freight cost share: by scope of delivery

Type; AUMA 15SN X 1600 Manufacturer: Berstorff, Germany Year of manufacture: 1998 Technical Specification: Working width: 1600 mm Steel belt width: 1750 mm Steel belt thickness: 1,8 mm Steel belt length: 15600 mm Rolls width: 1950 mm Center distance between frames: 2330 mm Heating roll diameter: 1500 mm Stretch rolls (I, II, III) diameter - 1000 mm Vulcanizing time: 1?30 min Working speed: 7?.210 m/h Max steam pressure in heating roll: 13 bar Max steam pressure in lower stretch roll: 8 bar Surface temperature of: Heating roll: ca. 195oC Lower stretch roll: ca. 175oC Pressure in heating zone between steel belt and rubber: 60 N/cm2 Main motor speed: 1 450 min-1 Drive position: Left from inlet Paint: RAL 6011 Air supply: 6 bar Cooling water supply: + 25oC Max hydraulic pressure Belt pressure tension: 250 bar Belt pressure regulation: ...

Cat.-No. 15-00013 in a very good condition Material: V2A - AISI 304, 1.4301, Material Thickness: Tank Body: 1,5 mm - Feet: 2,5 mm – transport lugs: 2, 5 mm Surface: inside: IIID, outside marbled Upper Body: Manhole Lid DN 400 with 4 Screws with clamp Thread Connection DN 50 Tank Corner Reinforcement 150 mm / 150 mm Lower Body: with Conical Bottom (Outlet DN 65) with Forklift Shoes. Can be accessed from all sides with a Forklift/Truck Pallet Measurements and Weight: Total Height: 1750 mm Height: 1250 mm Outer Dimensions: 800 x 1200 mm Weight: 130 kg The price is for one unit. Surcharges/unit (price upon request): Butterfly Valve DN 65 Butterfly Valve DN 50 Closing Cap for Outlet Reducing unit NW 65/40 or 65/50 All prices are valid Ex-Works, excl.VAT F ...

Kuka KR150L130 Series2000 Built in 2002 Payload 130kg Weight 1245kg Range 2900mm Connection line 7m/15m Control KRC2 Built in 2002 Weight 185kg Software 4.1.7 SP08 Approx. 4173 operating hours Hand-held programmer KCP2 ..

Catta Briga highpressure icecream homogeniser, cap 180 l/hr, 120 bar

Hi here sell a Schmitt enertec BHKW which is immediately ready for use and for sale also can be tested Data: Motor you E2876 R6 210 KW generator LEROY SOMER year: 2006 Hours of operation: ca 11000 CHP is until was run very well to expand only expanded because some customers have not finished it to pay bills. If you have questions I am under to you available: Andreas.Peters89@gmx.de

Industrial robots Kuka KR150 Series2000, And KR150L130, KR150L110, KR210 Built 2001/2002 Range 2700mm, 2900mm, 3100mm, 2700mm Payload 150kg, 130kg, 110kg, 210kg Weight 1245kg Connection line 7m or 15m Control KR C2 Weight 185kg Software stand V4.1.5 Hand programming kCP2 ..

technical data: Make: Loher Type: A 180 MA-2 Types No:: 6239319 Connection: Star 380 V / 42 A kW: 22 kW Rpm: 2930 rpm Note: Size 180 / Runner DS-5

Compressor KAESER 10 bar power 90 KW

Attachment: Chamber filter press used Type: Rittershaus & Baldwin AEHIS 1200 Design: bridges Holm Filter plates sizes: 1200 x 1200 mm Plate number: 35 Filter plates: PP Thickness: 30 mm Schedule: closed Filter cloths: optionally available in voting on the medium Filter surface: approx. 85 m ² Presses contents: approx. 1200 dm3 Filter pressure: 15 PSI Closing pressure: approx. 380-410 bar Plate transport: automatically Pump technology: optional Dimensions: L 5800 x B 1900 (2550) x H 2500 (2900) mm Accessories: filter cloth car wash, optional light barrier Extra services: On this complex warranty months 6-12. Condition: The unit is ready for use immediately. Buy or rent: Visits of facilities in consultation with us in the work.

Year of construction 1994 Stack mass: Depth - 2.40 meters High - 3.00 mtr Long - 11.50 meters Drying capacity - са.75 m3 gross Fans - 7 х 0.75 квт Chamber construction - container construction is not desmantlebel! Interior trim - Aluminium welded 2.0 mm Insulation - rock wool 80 mm Outdoor installation Electrical cabinet with computer control system MB-400 Very good condition

Technical data: 2009 overtaken Table load: 100 to. Table diameter: 3500 mm Table diameter with extension arms: 6000 mm Plan disc: 8 double T-slots Slot distance: 180 mm incl. 8 extension arms to increase the diameter of the washer to 6000 mm.

Stock number: UG5830 Used chamber filter press by FILTRI DIEMME model GIGANTE 1500. Frame type 1500 mm x 1500 mm /90. Press has 85 pp plates with bottom feeding inlet. Filtration surface about 321 m2. Press is equipped with control panel, Willet sludge pump designed for work on pressure 10 bar, polymer dosing system, cake washing system, photocell safety system. Plates designed for work on pressure up to 15 bar. Closing pressure 385 bar. Dimensions: length 10 m x width 2 m x height 2 m. Reported output up to 30 m3 of sludge per hour.

Material: Steel We are going to overhoul this machine before the delivery. You can also get the entire system with all components you need.

Qty. 1 Second-hand ingot caster plantMfc.:Sistem TeknikBuilt:1/2015Stopped in 4/2015Recycling capacity:5000 Ton/annumQty. 12 Units of Pyrotek moldsDim. of aluminium ingot: 1000 x 1000 x 500 mmWeight:500 kgCharging material: Aluminium cans, profiles, sheets, motor blocks, wheels etc.Scope of supply:Aluminium shredderMagnetic separator Aluminium de-coating machine Baler Aluminium gas furnace Aluminium casting system Gas generator Mass ARUN spectrometer Air compressor, conveyors, forklift, ect.Shredder and magnetic separation conveyorMfc.:YSSType:Mono shaft shredder J600Capacity:500 kg per hour high power electrical shredding machineMono shaft shredder stylePLC automatic control unit Siemens?Hydraulic unit for material pushing to shredding wheelCurrent control for shredder reverse †safe usageShredded aluminium pass onto conveyor unitMagnetic separation system for steel removalElec ...

Material: stainless steel Engine: 160 kW Content: 15000 ltr Weight: 11000 kg Length x Width x Height: 6300 mm x 2200 mm x 2500 mm Mechanism SDW (340kW) Flender Speed: 1500 / 63 More details on request. Very good condition. You can also get the entire system with all components you need.

Robot Kuka KR210L180 series in 2000 construction year 2002 reach 2700 mms weight 1245 kg load 180 kg control KRC2 weight 185 kg software state V4.1.7 SP08 Kuka KCP2 connecting pipelines 7 m .

Used appr. 100 m³ / 100,000 litres steel tank, single-walled, top condition, aboveground storage tank, on 2 bases, water tank, firefighting tank, water cistern. volume: 100 m³ / 100,000 litres material: steel tank dimensions: appr. Ø 3.0 m x 16 m long weight: appr. 15.0 t painted white outside, pure steel inside The container is used, has been emptied and professionally cleaned inside. According to the age traces of use are present. The container / steel tank can be used as storage tank for many different media. Upon request we can coat the inside with a food-suitable paint or rework the tank into a firefighting tank or otherwise to suit your demands, just ask us. Price upon request. Transport can be arranged at low cost. It is not possible to update all our advertisements daily. Since our inventory is changing continuously, it may be that this tank has alrea ...

Robot Kuka KR180 series in 2000 construction year 2001 reach 2700 mms weight 1245 kg load 180 kg control KRC2 weight 185 kg software state V4.1.7 SP08 Kuka KCP2 connecting pipelines 7 m .

Remaining stocks from Siemens S5 product row 250 E/A maps p. 5 15 analogous maps 25 versch CPU 25 stream care and more singles or parcel price

1 x Farrel 9in dia x 18in wide Two Roll mill, Machine number 72M0563, Swing sided type, Roller bearings, variable speed motor roll (to give variable friction), Cored rolls with rotary joints fitted, Adjustable material guides. Complete with all guarding and controls etc and in very good condition.

1 factory-tested, very well preserved double girder crane with 4 wheels per side to minimise wheel loads Load approx. 100,000/32,000 kg Wingspan approx. 26,700 mm Hook way approx. 14,000 mm Make SKET-year of manufacture/overhaul/workshop test 1981/2000/2016 Very low equipped with high-quality two-rail wind work trolley with main hub usage as a mounted crane 100 t and auxiliary hoist 32 t, cabins - and radio control, ideal wheel load distribution by 4 wheels per side working speeds: Hoist main hoist 100 t up to 0.25/2.5 m / min auxiliary hoist 32 t up to approx. 7.0 m / min Trolley gear approx. 7.0/20,0 m / min Crane chassis approx. 11.0/32.0 m / min

Cat. No. 12-1120 in very good condition Type 125VT-DS Model: HTIRM Size: NW 65 Serial-No. 1251149 Original Price: Euro 30.000,- Measurements and Weight: LxWxH: 166 x 52 x 102 cm Weight: 330 kg For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on dimensions and destination.

1, used, very well preserved double girder overhead travelling crane with 4 wheels per page of optimal wheel load reduction Load approx. 110.0/50,0 t Span 23.20 m Hook way approx. 15.0 m Make Horw Workshop examination 2016 Use as very low mounting crane Equipped with high-quality, robust two-rail - wind movement trolley, ideal wheel load distribution by 4 wheels per side, catwalk along the Crane bridge, cabin, as well as floor panel (easily to expandable radio control) Working speeds: Hoist gear 110T approx. 0.3/1.5 m / min Change-over 50 t approx. 0.6/3.0 m / min Katz LG 4.0/16.0 m / min Crane chassis 10.0/40.0 m / min

Robot Kuka KR150L110 series in 2000 construction year 2002 reach 3100 mms weight 1245 kg load 110 kg control KRC2 weight 185 kg software state V4.1.7 SP08 Kuka KCP2 connecting pipelines 7 m / 15 m .

MIW GmbH Motoren-Instandsetzungs-Werk Nord-West-Ring 8 D-27404 Zeven-Germany info@miw-zeven

All other original spare parts are available immediately from stock. o.g.Price are applicable. Freight+Packaging+law. Tax Please check the number of teeth ! MIW Ltd. Engine Repair Plant GmbH North-West Ring 8 D-27404 Zeven-Germany Tel:0049(0) 4281 950583 Fax:0049(0) 4281-950585 e-mail:info@miw-zeven.de abc.miw-zeven.de

Cat. No. 12-2450 in a very good condition Manufacturer: Disho Koruma Motor number: 155343 Type: VP 180/3300 Width: 2064 mm Length: 3040 mm Height: 3470 mm Weight: 4200 kg For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on dimensions and destination.

Data processing!

Robot Kuka KR150 series in 2000 construction year 2006 reach 2700 mms weight 1245 kg load 150 kg control KRC2 ed05 weight 185 kg software state V5.3.6 Kuka KCP2 ed05 connecting pipelines 15 m .

Robot Kuka KR180L130 series in 2000 construction year 2002 reach 3100 mms weight 1245 kg load 130 kg control KRC2 weight 185 kg software state V4.1.7 SP08 Kuka KCP2 connecting pipelines 7 m .

Inlet cross-section: 1200 x 1600 mm Drive: 110 kW, without gearbox Rotor flight circuit: 380 mm Rotor speed: approx. 470 rpm Rotor design: 66 cutting plates on tool holders Screen version: solid screen basket, reinforced with ribs Sieblochung: 15 mm Counter knife: with cutting gap adjustment Machine weight: approx. 5,900 kg Intake opening: 1,200 x 1,600 mm Engine power: 110 kW, without gearbox Rotor flight circle: 380 mm Rotor speed: approx. 470 rpm Cutting system: 66 cutting inserts on toolholder Screen: reinforced screencage, 15 mm perforation Counter knife: with mechanical adjustment device Machine weight: approx. 5,900 kg

Robot Kuka KR180L150 series in 2000 construction year 2002 reach 2900 mms weight 1245 kg load 150 kg control KRC2 weight 185 kg software state V4.1.7 SP08 Kuka KCP2 connecting pipelines 7 m .

Robot Kuka KR180 series in 2000 construction year 2002 reach 2700 mms weight 1245 kg load 180 kg control KRC2 weight 185 kg software state V4.1.7 SP08 Kuka KCP2 connecting pipelines 7 m .

Robot Kuka KR150 series in 2000 construction year 2002 reach 2700 mms weight 1245 kg load 150 kg control KRC2 weight 185 kg software state V4.1.7 SP08 Kuka KCP2 connecting pipelines 7 m / 15 m .

intake cross section: 1,600 x 1,200 mm motor power: 2 x 45 kW knife width: 55 mm knife number: 56 pieces rotor flight circle: 655 mm Planetary gearbox

LENGTH OF BILLETS: 9.0 M, DIA.: 160 MM,

WIDTH OF STRIP: 457-1524, THICKNESS: 0.254-1.63 MM WIDTH OF STRIP: 457 - 1676 MM, THICKNESS: 0.66 - 3.175 MM

Specifications / Technical Data S-1000 CNC-Router and CNC-Engraver This is the biggest machine of our High-Z cnc-router series. With external dimensions of approx. 1350x800mm it is still very handy. With the High-Z 3D-cnc-routers you purchase an allround talent in TÜV-certified quality. If you want to clampand fix complex workpieces on the worksurface, or, or, or clamp work-pieces in a high bench vise (the cnc-machine sits on a frame-construction, is driven by 2 motors and therefore allows to be positioned above a piece to be processed). Or if you simply want to do engraving- or drillingjobs.you can work on a flat surface, with a pieces of sheet MDF fixed to it. Plane it once and you will be able to work with a precision of +-0,02 mm depth. All cnc-machines are being delivered with black energy-chains on all axis, which allows a better cabling management. Also, all cnc-milli ...

The container is factory-new, enstpricht the German Institute for Standardization 6616, owns 2 saddle feet is emptied inside and cleaned and undercoated outside, incl. rise leaders. D = 2.90 m - L = approx. 16.00 m. the container receives a factory-new Kunststoffinninhuelle - continuously to the storage of liquid fertilizer incl. leaky warning device mounts in the protective box. the plastic inside cover owns a Allgemeine appraisial Zulassung Z-65.30-466 and is therefore for the storage of liquid fertilizer AHL as well as reducing agent NOx from 32 (AdBlue) suitably and admitted. the price gets on ex works - freely charged.

Used chamber filter press / filter press Rittershaus & Blecher / R & B AEHIS /1200 x 1200 Plate size: 1200 x 1200 mm Useful length: 2500 mm Chamber number: 44 pieces Cake thickness: 30 mm Filter pressure: 16 bar Closing pressure: min. 380 bar / max. 440 bar Total filter area: 110.5 m2 Cake volume totalling: 1504 litres

used membrane chamber filter press / filter press Passavant Noggerath 1200 x 1200 frame size: K1200 / 110 format of the filter records: 1200x1200 execution: unanimously (filtrate derivation by a collective management) material of the filter records: PP material of the membrane records: PP number of the filter chambers: 100 max. / 33 strength of the filter cake: 30 mms mix pack filtration surface: 230 max. / 76m? filtration volumes: 2985 max. / 985 litres filtration pressure in the chambers: 8 cash max. pressure under the membrane: 15 cash max. temperature with filtration: 20 °C max. material of the filter cloth: PP working pressure in the hydraulic cylinder: 400 cash max. dimension of the chamber filter press: Length: 9,786 mms, width: 2,550 mms, height 2,100 mms weight of the chamber filter press without mud: 18,210 kg of MAX hydraulic oil: OH-HM 32  ...

Used chamber filter press / filter press Rittershaus & Blecher / R & B 1500 x 1500 Plate size: 1500 x 1500 Useful length: 9000 mm Chamber number: 129 Cake thickness: 30 mm Filter pressure: 16 bar Closing pressure: 380 bar Test pressure: 440 bar Operating temperature: 50 C Total filter area: 460 m2 Cake volume totalling: 6.2 m3 Motor voltage: 380 volts Plate material: PP Operation page: Right and left Plate transport: fully automatic

Used membrane filter press / filter press Rittershaus & Blecher / R & B 1200 x 1200 (Mix) Plate size: 1200 x 1200 mm Membrane plates: 54 pieces Chamber plates: 55 pieces Membrane pressure: 15 mm Filter pressure: 10 bar Closing pressure: min. 350 bar, max. 380 bar Total filter area: 242 m2 Cake volume totalling: 4320 litres Number of filter presses: 2 pieces

Used chamber filter press / filter press Rittershaus & Blecher / R & B 1500 x 1500 Plate size: 1500x1500mm Cake thickness: 30 mm Useful length: 6065 mm Chamber number: 80 pieces Total filter area: approx. 320 m2 Filter cake volume: approx. 4 m3 Filter pressure: 15 bar Closing pressure: min. 300 bar / max. 400 bar Expiration: closed Plate material: PP