mach 1 used for sale

Blister Machine Manufacturer: Uhlmann Type UPS 1070 Output 15 – 200/cycles min. Film width min. 150 mm – max. 300 mm including colour and filling material control, make Scanware, type LYNX Spectra CL/HR Blister machine with side channel blower 2016 new sealing head with adjustment dome Dimensions: 8000 mm length x 1800 mm width x 1900 mm height, weight approx. 7 tons

PEELER- SKINNER, TRIO, TYPE: FDS 104 Technical description: Plastic wired belt Belt width: 350 mm Power supply: 380/440 V - 50/60Hz Dimensions: 2200 x 1200 x 1500 mm The TRIO FDS Skinning Machine will skin most kind of fish fillets. The machines are used for skinning Sale and other flat fish, Hake, Haddock, Whiting, Merluza, Hoki, Orange Roughy, Herring, Mackerel, Sardines, Salmon, etc. The machine operates on the principle that the skin of the fillet freezes and glues to the cold, rotating drum, and thus is held in position. The freezing is approx. 1/10 mm deep. A rotating band knife cuts the fillet away from the skin, and the skin is then scraped off the drum. The thickness of the cut, and thus the depth of the skinning, is infenitely adjustable between 0-12 mm. The refrigeration system operates on a system of indirect cooling, a sealed refrigeration unit cooles down a secondary cool ...

VACUUM STUFFER, VEMAG ROBBY1, TYPE:134 Technical description: Serial number: 134 0454 Power supply: 220-380 V/ 50-60 Hz, 5.1 Kw Approx. weight: 425 Kg

Offered is a hydraulic punching machine: Punching force: 100tons (Tm), max. punching cross-section: 2350mm², punching capacity (standard): Ø50mm at 15mm material thickness, punching depth: 500-800mm, incl. special accessories: round punch: max. Ø80mm at 9mm, max. Ø100mm at 7.5mm, square punch: 50mm at 12mm, 60mm at 9.5mm, 70mm at 8mm, rectangular punch: max. 90 x 25mm at 10mm. Inspection possible by appointment.

Key data: 1350 mm, 1

- Working width 1350 mm - Rubberized pressure rollers - Roller table at the inlet and outlet - Belt feed speed 2.5-13 m/min, infinitely adjustable, perforated belt (prepared for vacuum tensioning device by external, not included drive motor) - Combi-contact roller-grinding unit (15 kW), with electr link pressure bar (element width 25 mm), belt speed infinitely variable from 2.5 to 20 m/s, belt length/width 2150/1370 mm, belt blow-off device, sanding shoe rest in the machine, pneum. Abrasive belt tensioning device - 1 rotating workpiece cleaning brush (0.75 kW) on the outlet side of the machine - Paintwork: RAL 5018 - Total connected load approx. 22 kW (36 A) - Operating voltage: 400 V, 50 Hz Technical data subject to actual equipment The sale is carried out on behalf of the owner from the current location, in the condition as existing, excl. Warranty.

GeneralCNC Turning Centre; Control: CELOS with Siemens 840D sl Operate Working areaSwing diameter over guide ways710 mmTransverse stroke260 mmLongitudinal stroke1345 mmClamping chuck diameter max.315 mmWork spindle (left)Spindle bore91 mmSpindle diametre on front bearing140 mmMain drive 1Drive power (100% DC)22 kWSpeed range- 4000 rpmTorque (100% DC)410 NmMax. torque (40% DC)525 NmAccuracy at point stopping0,001 degreeTool holder 1Number of tool stations12 Shank diametre according to DIN 6988040 mmNumber of driven tools12 Speed max.-6000 rpmPower max. (100% DC)10 kWFloor space/WeightDimensions (L x W x H)5,4 x 2,07 x 2,6 mWeight approx.7800 KgTechnologie cycle alternating speedTechnology cycle for the application of an alternating speed for vibration sensitive set-ups (Only in conjunction with Siemens control)Chuck rinsing device, outsidechuck rinsing device, outside (main spindle)Main s ...

Manufacturer: Optimum Model: OPTImill F 105 CNC Sinumerik 808D ADVANCE Type of Machine : Milling Machine Condition : New Included Accessories: - CNC Tool Starter Set BT 40 - SPW 12 Clamping Tool Assortment, 58-piece - Hydraulic Milling Vise HCV 105 - 20 Liters Cutting and Drilling Emulsion AQUACUT C1 - 4th Axis Preparation Find more here - / Contact us at -

Manufacturer: Printing International Model: Lino LP-160x6 Year of Manufacture: 2016 Type of Machine : Pad Printing Machine Technical specifications - Power supply: 3 x 400 V + N + PE-50 Hz (three-phase connection) - Fuse protection: 16 A - Weight: 2500 kg Find more here - / Contact us at -

A CNC vertical milling machine POS is available. Travel X/Y/Z: 1050mm/530mm/630mm, table dimensions X/Y: 1150mm/560mm, max. table load: 700kg, tool holder: SK40, tool stations: 30, speed: 10000rpm, feed rate: 12m/min. Machine dimensions X/Y/Z: approx. 4500mm/3000mm/3000mm, weight: approx. 7600kg, control: Heidenhain. Documentation available. An on-site inspection is possible. The machine has a defect.

A Trumpf punching machine still in operation, including a Trumalift loading and unloading unit that has not been used for a longer period, is available. 1) CNC punching machine Trumpf TruMatic 500, year of manufacture: 1993, max. punching force: 220kN, max. sheet thickness: 6.4mm, max. workpiece weight: 150kg, max. punching diameter: 76.2mm, simultaneous motion: 108m/min, stroke rate: 900/min, machine dimensions X/Y/Z: approx. 6700mm/5800mm/2200mm, weight: approx. 11000kg. 2) Trumpf Trumalift SheetMaster 1250 loading and unloading system, year of manufacture: 1993, max. sheet dimensions X/Y: 2500mm/1250mm, max. sheet thickness: approx. 8mm. Documentation available. An on-site inspection is possible.

A 4-axis CNC bar machining center Elumatec is available. Version: 7.8m, travel X/Y/Z: 7720mm/845mm/620mm, max. machining length face/non-face: 7720mm/7600mm, positioning accuracy: +/-0.1mm/m, max. spindle speed: 24000rpm, tool holder: HSK-63F, tool stations: 8, clamping devices: 8, machine dimensions X/Y/Z: approx. 11250mm/3400mm/2950mm, weight: approx. 7400kg, operating hours according to production planning system: approx. 42200h. The machine has no hour counter. Documentation available. An on-site inspection is possible.

sheet width: 1250 mm plate thickness: 1,5 mm distance between columns: 1300 mm daylight opening: 80 mm : 155 ° total power requirement: Handbetrieben weight of the machine ca.: 0,18 t dimensions of the machine ca.: 1,4 x 0,8 x 1,3 m Segment-bending machine Segment widths: 2x50mm,1x70mm,2x75mm, 2x100mm,4x150mm, 1x170m. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

TECHNICAL DATA: Usable width: 1160 mm Installed power: 0.50 kW

Key data: 1 mm, 1 mm, 700 mm

5-Axis CNC Vertical Machining Center Mikron HPM 1150U Year of construction 2013 Heidenhain iTNC 530 NC Rotary Table Table Ø 1,000 mm Table load max. 1,100 kg Table rotation axis c-axis 360° / 0.001° NC swivel spindle Head swivel axis B-axis +16°/-120° / 0.001° X 1,000 mm Y 1,150 mm Z 700 mm Spindle speeds up to 24000 rpm. 238 tool magazine slots Two identical machines (MV-6519/MV-6520) available. The machines come from a former aerospace facility and are in good condition. They ran for about 8 years in continuous operation and 5 years sporadically. Offer number MV-6519 + MV-6520

Magnetic plate surface: 1600 mm x 800 mm, Max. width to rectify: 900 mm, Maximum height to be corrected: 800 mm, Weight: 12.500 Kg, Working wheel dimensions (od x id x width): Ø504 x Ø203,2 x 100 mm

Height=1.5 m, Overall length= 0.64 m, Overall width= 1.74 m, Net weight= 273 kg,

Unit 1 - Geiss CNC FZ 2800 x 1000 - Year of Manufacture: 2013 - Total Weight: 42.05 kN - Voltage: 400V, 3-phase + N, 50Hz - Connected Load: 25.62 kW - Rated Current: 37 Amp - Certification: CE Unit 2 - Geiss CNC FZ 2000 x 1000 - Year of Manufacture: 2012 - Total Weight: 30.22 kN - Voltage: 400V, 3-phase + N, 50Hz - Connected Load: 24.72 kW - Rated Current: 36 Amp - Certification: CE Find more here - / Contact us at -

LEAK TEST MACHINE LTM72 FACTORY: M2 & M9 QUANTITY: 2 UNIT CONDITION: LEAKING & NOT FUNCTIONING, CAN TAKE THE PART AS SPARE PART CONTACT NUMBER: ZULAIKA 0129037331

Key data: 1000 kN

ARBURG ALLROUNDER SELECTA 470 S 1000 – 675 (Year 2001) Serial number: 187132 – Machine 8 Clamping force: 1000 kN Distance between tie bars: 470 x 470 mm Platen size: 637 x 637 mm Max. mould height: 750 mm Ejector force: 40 kN Ejector stroke: 175 mm Shot volume: 675 cm³ Operating voltage: 400 V – 3 Ph – 50 Hz Heating capacity: 14.9 kW Pump motor: 1 x 22.00 kW Total connected load: 36.9 kW Dimensions: 4180 x 1645 x h, 2140 mm. Machine weight: 5400 kg

Key data: 1000 mm, 600 mm, 660 mm

Control Heidenhain ... TNC 620 Clamping table surface ... 1300 x 600mm Axis X ... 1000mm Axis Y ... 600mm Axis Z ... 660mm Spindle speed ... 0-10000 rpm controlled axes ... 3 cooling ... 20bar, Grundfos ISO 40 Max. table load ... 700 kg L x W x H ... 3000 x 2700 x 2940mmmm Machine weight... 5500kg Magazine spaces ... 24 Handwheel Heidenhain HR510FS Workpiece Probe Heidenhain TS460 Rinsing gun 10bar The machine has undergone a complete overhaul. More info on request. The machine is ready for the viewings.

Reference ID PP-58237 Category Flatbed Die Cutter Manufacturer Bobst Model SP 142-ER Year Built 1985 Color - Impression - Working Hours 75690 Speed 6000 sheets/h Max. size 142 x 102 cm Min. size 70 x 50 cm Condition Good Location Europe Availability Immediately Machine Description Double Stripping working hours 75690

The TBA 8 V110 1000ml Square is a space-saving Tetra Pak solution for safe, aseptic filling of liquids. Their square design ensures maximum stability and efficient display on the shelf.

A vertical cross grinding machine Sunnen is available. Bore diameter range: 3mm-65mm, max. workpiece length: 250mm, working area dimensions X/Y/Z: 150mm/150mm/150mm, slide speed range: 0.001mm-0.8mm/s, stroke rate range: 30-400, spindle speed: 4000rpm, feed force: 3800N, grinding oil tank volume: 280l. Machine dimensions X/Y/Z: approx. 2150mm/2200mm/2900mm, weight: approx. 2200kg, operating hours: approx. 5000h. Including indexing table and grinding oil tank with magnetic separator and filter. Documentation available. An on-site inspection is possible.

There are four Pfaff sewing machines available: 1) Industrial sewing machine Pfaff 461. 2) Industrial sewing machine Pfaff 463. 3) Industrial sewing machine Pfaff 1445. 4) Industrial sewing machine Pfaff 3337.

Planetary mixer Tonelli PDC 120 Universal 2000 Year of Make: 1989 Condition: functional Siemens control system Boiler capacity: 120 litres Incl. 2 tank cars Incl. 2 tools Accessories of choice and availability

Planetary mixer Tonelli M 120 Year of Make: 2007 Condition: functional Siemens control system Boiler capacity: 120 litres Incl. 2 tank cars Incl. 2 tools Accessories of choice and availability

Planetary mixer Tonelli M 120 Year of Make: 2003 Condition: functional Siemens control system Boiler capacity: 120 litres Incl. 2 tank cars Incl. 2 tools Accessories of choice and availability

Wrapping machine Fritsch CRH 120/400 Year of Make: 2015 Approx. 450 operating hours Condition: technically as good as new, visually few signs of wear 1-row operation 400 mm table width Output depending on the size of the piece, the number of windings and the feeding capacity: max. 5000 pieces/h Suitable for line combination

Planetary mixer Rego PM 100 EP Boiler size:Â 100 l Storage computer with recipe management Electric speed control Electric boiler height adjustment Digital time and speed display as well as electr. Automatic switch-off Quick tool change system Incl. 2x kettle, 1x whisk, 1x whisk, 1x whisk, 1x flat beater, 1x kneading spiral

incl. integrated punching station Cutting angle range: 30°-120°, Sheet thickness up to 6 mm Punching capacity 15 tons Table approx. 1000 x 650 mm, incl Footswitches, div tools and stops Manual

Key data: 840 mm, 3000 mm, 490 mm

Circumferential. over bed 840 mm, over cross slide 490 mm Center width 3000 mm Speed range 10-1250 rpm, spindle nose DIN 55022 Gr. 11 Spindle bore 105 mm Feeds 0.060 - 1.4 mm // 0.024 - 0.518 mm Thread metric 1 - 224 mm Drive power 18.5 kW Quill path / cone 220 mm / MK 6 incl. Hardened and ground bed guides, electromagnetic brake of the main spindle mechanically driven upper support, rapid traverse longitudinal/transverse Multifix steel holder, fixed bezel 2-axis digital display,

Used separator/muscle demusing machine from Meat Master type M18 / P-100-S. Year of manufacture 1999. Manufacturer's documentation. CE

Door belt drilling machine for processing aluminium profiles with pneumatic material tensioners and micro spraying device Processing length: max. 2400 mm Wing profile width max. 108 mm Frame profile width: max. 200 mm Profile height: 45-80 mm Spindle speed: 1900 rpm Weight: approx. 500 kg

B&A REF:  9307 TON: 1100 SCREW DIAMETER:  105MM SHOT WEIGHT: 3075 STROKE VOLUME:  3380CM3 INJECTION PRESSURE: 1600AR PLATEN SIZES:  1850 X 1810MM DBTB: 1400 X 1150MM MIN MOULD HEIGHT:  600MM MAX MOULD HEIGHT: 1200MM MOULD OPENING STROKE:  1800MM MAX DAYLIGHT:  2400MM EJECTOR STROKE:  300MM CONTROLS: CC 200 TOUCH CORE PULLING: 4 AIR VALVES: 2 MOTOR: 75 HEATING CAPACITY: 72KW ROBOT INTERFACE: EUROMAP 67 SCREW DRIVE:   HYDRAULIC

B&A REF:  9302 TON: 270 SCREW DIAMETER:  55MM SHOT WEIGHT: 594 STROKE VOLUME:  653CM3 INJECTION PRESSURE:  2041AR PLATEN SIZES: 940 X 940MM DBTB: 630 X 630MM MIN MOULD HEIGHT:  250MM MAX MOULD HEIGHT: 650MM MOULD OPENING STROKE:  600MM MAX DAYLIGHT:  1250MM EJECTOR STROKE:  200MM CONTROLS: UNILOG B4 CORE PULLING: 2 AIR VALVES: 1 MOTOR: 30 HEATING CAPACITY:  18.2KW ROBOT INTERFACE: EUROMAP 67 SCREW DRIVE:   HYDRAULIC

B&A REF:  9311 TON: 260 SCREW DIAMETER:  55MM SHOT WEIGHT: 605 STROKE VOLUME:  642CM3 INJECTION PRESSURE:  1460AR PLATEN SIZES:  960 X 960MM DBTB: 650 X 650MM MIN MOULD HEIGHT:  200MM MAX MOULD HEIGHT: 750MM MOULD OPENING STROKE:  650MM MAX DAYLIGHT:  1400MM EJECTOR STROKE:  225MM CONTROLS:  CM10 CORE PULLING: 1 AIR VALVES: 1 MOTOR: SERVO 22  HEATING CAPACITY: 14KW ROBOT INTERFACE: EUROMAP 67 SCREW DRIVE:  HYDRAULIC

CONTROLS   CNC controls SIEMENS 840 D WORKING RANGE -CUBIC-   number of processing axes (excl parallel axes): 4   .. among of them simultaneous CNC axes: 3   X-axis travel: 2200 mm   Y-axis travel: 1600 mm   Z-axis travel: 1850 mm   rotating range B-axis from: 0 °   rotating range B-axis up to: 360 ° TABLE   table surface (left-right): 1000 mm   table surface (front-back): 1250 mm   workpiece load (max): 5000 kg SPINDLE / HEAD   spindle revolutions (min): 20 /min   spindle revolutions (max): 10000 /min AXIS DRIVES   rapid traverse: 40000 mm/min TOOL MAGAZINE   number of positions: 60   tool diameter max.: 110 mm   - with free neighbour positions: 250 mm   tool length max.: 450 mm   tool weight max.: 35 kg AUTOMATIC WORKLOAD EQUIPMENT   number of store positions: 2 ELECTRICAL SPECIFICATIONS   mains power supply: 130 kVA   mains voltage: 4 ...

CONTROLS   PLC SPECIFICATIONS THROUGH FEED GRINDING MACHINE   Working width: 1000 mm   number of brushing station: 6 BELT GRINDING UNIT   workpiece height (max): 100 mm   spindle revolutions (min): 0.3 /min   spindle revolutions (max): 10 /min ELECTRICAL SPECIFICATIONS   mains voltage: 400 V   mains frequency: 50 Hz DIMENSIONS / WEIGHTS   space requirements -left/right-: 1800 mm   space requirements -front/back-: 1750 mm   total height: 2200 mm   total weight approx.: 1500 kg

A 3-axis milling machine is offered. Travels X/Y/Z: 1016mm/610mm/760mm, tool changer: 24 positions, spindle: prepared for external cooling unit. Accessories: recooling unit Rehsler TAE evo M, Renishaw measuring system, inspection by appointment possible.

X-axis: 1000mm, y-axis: 1050mm, z-axis: 600mm, table dimensions: 895x895mm, spindle speed: 24000rpm, probe: Renishaw, number of tools: 40, control: Roders RMS6, spindle taper: HSK 40, total connected load: 85kVA, weight: 33t, with paper filter. an on-site inspection is possible.

Schneider Seantor 115 MC year 1982 overhault in 2003 with new control board air table side tables light barrier in very goog condition

Key data: 6400 mm, 2 mm

Double bending machine, type TwinPro, with roller shears, Attachment rail, brush table, autom. Sheet thickness adjustment, pneum. Clamping finger Machine is repaired, checked, cleaned by a specialist and is then fully functional. Test run is carried out. Working length: 6400 mm Sheet thickness max. steel:2.0 mm Sheet thickness max. aluminium: 3.0 mm Sheet thickness max. VA: 1.25 mm Back gauge (min.): 15 mm Back gauge (max.):1125 mm Projection: 1300 mm Colour: anthracite/light grey/silver Total power requirement: 20 A Weight: 9250 kg Upper beam lift opening width: 200 mm with sheet thickness adjustment Bending Angle (Max):140 degrees Crowning on the bending beam Roller shears: SL3/3.0 mm Number of stands: 6 pieces Insertion depth: 1300 mm Machine number K14023

Offer 26125 Technical data: - Cutting length up to 150 mm - Cutting thickness - at 400N/mm² strength 4 mm - at 700N/mm² strength 3 mm - Cutting angle infinitely adjustable 30° - 120 ° - Pneumatic clamping of the cutting angle adjustment - Stroke 22 mm - Stroke rate 60 1/min - Table support surface with T-slots and depth stops - Table height 900 mm - Drive 400 V / 3 kW - E - Footswitch - Space requirement approx. W 1000 x H 1150 x D 1400 mm - Weight approx. 850 kg

Vertical Machining Center MIKRON VCE1200+

I am happy to offer this extremely well-maintained RD 1300 for Feb / March 2027. Equipment: Doesn't even run in 1 shift operation only for self-joinery! ROBOT-Drive carpentry machine (mirror machine) version 1250 mm for machining cross-section min. 20x50 mm to max. 300x1300 mm incl. inlet/outlet roller conveyor Production program CAMBIUM Line laser for component referencing Control unit for disposal with control knobs Movable control panel on castors Blow-off device chips Pressure booster for ROBOT Timber flow direction from right to left (mirror machine) Automatic feeding system with buffer function – AQF 7 strings Extension of automatic conveyor for timber length 16 m Soft start for automatic feeding 5-axis sawing/slotting/marking unit Horizontal drilling unit 2.2 KW Slot tool interchangeable Extension of the conveyor roller conveyor for 13 m of timber length L ...

Sandretto Nove HP 100 Injection Moulding Machine + Chiller & Hoist Overview Excellent opportunity to acquire a complete plastic injection moulding cell. This lot features the reliable Sandretto Nove HP 100 industrial injection moulding machine, capable of processing a wide variety of polymers (PP, PE, ABS, PS, PA, PC). To provide a complete turnkey solution for your manufacturing floor, the sale also includes the original Sandretto Nove chiller (cooling unit) and a Sandretto Otto 150 hoist. Clamping Unit Specifications Clamping Force: ~100 Tons (≈ 980 kN) Tie-Bar Clearance: ~410 mm (16.14") Maximum Mould Opening: ~460 mm Minimum Mould Thickness: ~100 mm Clamping Type: Hydraulic 4-tie-bar system Injection Unit Specifications Screw Diameter: Variable (approx. 30–45 mm depending on version) L/D Ratio: ~18:1 to 22:1 Injection Pressure: Up to ~1500–2000 ...

hogedrukkoeling via de spindel spanentransporteur X-axis: 1660 mm Y-axis: 510 mm Z-axis: 510 mm Table dimensions: 2000 x 510 mm Max weight on the table: 1000 kg Admission in spindle (ISO): BT-40 Power on the spindle: 18,5 kW Control : Mazatrol 640M Toolchanger: yes Number of toolholders: 30 positions Number of rotations: 12 000 rpm Weight: 8250 kg

Center height 175 , Center width 700 , Inclined position of rotary table 10° , Workpiece headstock swivel 90° , Speed range 30-675 rpm , Morse code 5 ,grinding headstock _ grinding wheel diameter 400 , largest width 50 , drive power 6,25kW