mach 1 used for sale

Machine vice, sturdy vice, drill press vice -Jaw width: 190 mm -Clamping depth: max. 160 mm -Dimensions: 630/200/H160 mm -Weight: 55 kg

Machine vice, sturdy vice, drill press vice -Jaw width: 160 mm -Clamping depth: max. 105 mm -Dimensions: 450/160/H125 mm -Weight: 38 kg

Machine vice, sturdy vice, drill press vice -Jaw width: 160 mm -Clamping depth: max. 105 mm -Dimensions: 450/160/H125 mm -Weight: 38 kg

Machine vice, sturdy vice, drill press vice -Vise: rotatable -Jaw width: 160 mm -Clamping depth: max. 105 mm -Dimensions: 460/310/H160 mm -Weight: 50 kg

grinding diameter: 250,350,450 mm grinding length: 1000 mm centre height: 125,175,225 mm grinding wheel diameter: 400 mm grinding wheel width: 50 mm bore: 127 mm : MK5 work piece spindle speed: 20-400 U/min workpiece spindle - bore: mm grinding head swivelling: 360 ° grinding spindle head - swivable: 180 + - ° grinding spindle speed: 1500,1700,2200 U/min : 0,001-0,030 mm/Ø : 0-0,95 mm/Ø : ±8 ° longitudinal feed of the table: 1300 mm table speeds: 0,02-6 m/min : 130 kg : 130 inkl. Spannugkg kg : mm grinding depth: mm : 70 mm total power requirement: 6,5 kW weight of the machine ca.: 2,5 t dimensions of the machine ca.: 4,2 x 2,0 m As the world’s leading company in Kellenberger overhaul and retrofit we are not only able to deliver machines in a quality similar to a new machine and with warranty, but we can also offer you the service for your machines.Version R: Maschine hat Zentral ...

We offer one second hand sewing machine for the manufacture of industial sacks, type 1014/1, Icoma, Germany, Tube width 20-80 cm, Tube length 55-150 cm, with cutter, sewing head from Union Special, machine ready for test production, one spare sewing head could be given with the machine

Axes Strokes X = 3706mm Y = 2294mm Z1 = 515mm Z2 = 371mm Max rotation 24000 rpm C axis = 360 deg non-stop rotation B axis = 360 deg non-stop rotation 16 position revolver toolchanger

COSMOS 1050 precision surface grinding machine, grinding area 1000 x 500 mm, grinding wheel 400 x 80 mm, magnetic clamping plate 1000 x 500 mm, Mitsubishi PLC control and drive technology, automatic grinding cycle with roughing, finishing, firing and lifting, dressing amount is automatically compensated, highest quality with unbeatable cost-benefit ratio. Machines can be viewed under electricity, test grinding of your workpieces is possible. We are also happy to take over the installation and training on site, as well as the subsequent service. For more information, please visit: long-grinding technology

Machine vice, sturdy vice, drill press vice -Jaw width: 155 mm -Clamping depth: max. 120 mm -Dimensions: 550/300/H160 mm -Weight: 38 kg

Double bench grinder, double grinding machine, pedestal grinder, pedestal grinder -Motor power: 0.5 kW -Speed: 3200/5200 rpm -Grinding discs: max. Ø 180 mm -Operating voltage: 380 volts -Dimensions: 500/500/H1550 mm -Weight: 170 kg

1Head Paper Drill

Reference Num.: 4103 Brand: Heidelberg Type: SM 102-2-P Construction year: 1998 Impressions: 477 mio Size: 720 x 1,020 mm Available: directly Status: Not in production Location: Malaysia Sheet size: min 280 x 420 mm, max 720 x 1,020 mm Printing speed: max 13,000 sheets/hour Printing units: 2 Paper thickness: 41.14 mm Machine size: Length: 6,680 mm, Width: 3,160 mm, Height: 2,170 mm Total weight: kg 16,900 / lbs 37,258 Equipment: - CPC 1-01 - CPTronic - WEKO Puderapparat T66

Travel (X/YZ): 3,048 x 1,524 x 150 mm, Cutting head with 5 ́ / 7.5 ́ and 9 ́ lens, sheet metal detection, Laser CV5000 Pallet changer Fabr. Prima Power/OMS Sordella, max. 3,300 kg Extraction system, Fabr. Donaldson, Type 2DFP4-SPRK, 2,400 m³/h, Refrigeration system, Fabr. Hyfra, type sigma 67-S Control Prima Power NC Expressw e³ Laser Classic, YOC 2018,

Key data: 12 , 10 , 18

Now fully refurbished by our team at STV Machinery in Wellingborough, Northamptonshire is this high precision BOY 12A injection moulding machine. Fitted with the Procan controller and 18mm diameter screw, which gives a shot weight of 9.64 (PS)g. The 12A from BOY is one of the most common small moulding machines we see, it is extremely accurate while still maintaining versatility with tooling and familiar control setup. Refurbished machines from STV Machinery undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault free cycles prior to sign off ensures trouble free operation once delivered. Machines are ultra clean and cosmetically as good as we can get them. We guarantee our refurbs are delivered fault free and leak free. Prices shown are ex-works, but we can quickly provide DAP ...

Professional production system Floor model - works electrically with foot release heavy duty version cleaned & checked Four-head model Floor model with foot pedal heavy duty model adjustable side stops several paper drills drill holder

Diamond core drilling machine, core drilling machine -3x: drill stand -Max. Drilling capacity: Ø 60 mm -drilling depth: max. 400 mm -Drive: 1050 W -Speeds: 1500/3000 rpm -Core drill: Ø 18/24/29 mm -Sale: only complete -Weight: 70 kg

Stripping Device, Varioplan System, Mabeg Non-Stop Feeder with Pre-Loader, Non-Stop Delivery, Centerline, Elevated, Sidelays On Operator And Off-Side, Formats: Max. 750x1050mm, Min. 350x400mm, Max. Cardboard Thickness: 1,8mm, Max. Corrugated Cardboard Thickness: 3mm, Speed: 9000 Sheets/Hour

Inv. Num. : 5839 Type: PUMA TT 1800 SY Producer: DOOSAN Created: 2013 Parameters: Control system: FANUC 31i-B Duty cycle: 8981 h Maximum turning length: 600 mm Maximum turning diameter over bed: 300 mm Maximum turning diameter over support: 230 mm Number of spindles: 2 pieces Maximum main spindle power: 22 kW Spindle clearance: 76 mm Maximum spindle speed: 5000 1/min Maximum workpiece weight: 120 kg Max. rod diameter: 65 mm Axis X1/X2: 165/190 mm Axle Z1/Z2: 700/720 mm Axis Y: 100 mm B-axis: 770 mm C1/C2 axis: 360 Weight: 7800 kg Equipment: Bar feeder SS 2500 Conveyor Feeder/Dispenser

Inv. Num. : 7546 Type: 125-CCN Produzent: Schaublin Erzeugt: 1996 Parametern: Steuerungssystem: FANUC Series 20 T Einschaltstunden: 7352 h Maximal-Drehlänge: 500 mm Maximaler Drehdurchmesser über Bett: 270 mm

One used book sewing machine Meccanotecnica Aster 160 Year of man.: 2000 Description: - Digital display - Optical sheet control - 4 4 opening possibilities Technical specifications: max. signature size. 320 x 420 mm min. signature size 75 x 150 mm max.number of stitches: 11 max. mechanical speed: 160 cycles/min

Cardboard shears , Cardboard cutting machine , Cutting length 110 cm . Masive steel table top , Cleaned and tested

Kneading Machine Spiral Kneading Dough Machine Model: Spiralo 120 A sophisticated technology ... already proven many times over! LED control with program control 2 speeds + 1x boiler counter-rotation, 3 timers Doughs from 9 to 120 kg / 6-80 kg flour Flour dust hood with protective circuit Stainless steel boiler and spiral Floor-standing machine with base plate 1 extendable tank car DGUV V3 tested Connection 400V, 9.75 kW, 32A-CEE plug Dimensions: 800 x 1650 x 1340/1850 mm, WxDxH TOP quality and price in one machine! New machine with 24 months warranty + service package Option: Additional tank car 120 Soft starter Maintenance contract We have a wide range of spiral mixers in stock!

Multifunctional panel and panel machining center These are two CNC machines integrated into a compact multifunctional machine – designed for the production of rear-ventilated facades – for prefabrication in drywall and acoustic construction, for aluminium and wood panel processing. Sawing + drilling + milling (also V - groove milling with a separate milling unit) + brushing + grinding + polishing, all with a single multifunctional machine. CNC – controlled, very compact, multifunctional inclined table machining centre with a small footprint – for the processing of plates and panels made of all (easily) machinable materials such as aluminium plates and aluminium sheets, non-ferrous metal plates and non-ferrous metal sheets, composite materials – such as Alucobond – Reynobond® – Dibond® and others, fibre cement panels – such as Eternit®, synthetic resin panels –  ...

1 CNC lathe spinner type CNC TC82 Fanuc 1998 2 CNC machining machine (miling) Stama type CNC 014 Fanuc 2000 3 CNC BAZ milling machine AXA type VHC 2-M Haidenhain 1999 4 CNC lathe (lathe) Takisawa type TS 20 Fanuc 1985 5 CNC Drawing Machine (lathe) Unitec Type UT6 Siemens 2008 6 CNC lathe (lathe) spinner type TC 108 Fanuc 2003 Note: Machine parameters must be fed into item 1, but otherwise works perfectly. Pos. 2 also works single-wall, but a heat sensor must be replaced

Key data: 5000 mm, 1600 mm

Multifunctional panel and panel machining center These are two CNC machines integrated into a compact multifunctional machine – designed for the production of rear-ventilated facades – for prefabrication in drywall and acoustic construction, for aluminium and wood panel processing. Sawing + drilling + milling (also V - groove milling with a separate milling unit) + brushing + grinding + polishing, all with a single multifunctional machine. CNC – controlled, very compact, multifunctional inclined table machining centre with a small footprint – for the processing of plates and panels made of all (easily) machinable materials such as aluminium plates and aluminium sheets, non-ferrous metal plates and non-ferrous metal sheets, composite materials – such as Alucobond – Reynobond® – Dibond® and others, fibre cement panels – such as Eternit®, synthetic resin panels –  ...

Demonstration-ready machine equipped with loading system. Specifications Grinding spindle motor 2.2 kW Control spindle motor 0.25 kW Coolant pump engine 0.2 kW Grinding wheels Ø max. 150 min. 120 mm Bore - Ø 50 mm Grinding wheel width up to 50 mm Control discs Ø max. 100 mm Bore - Ø 40 mm Regulating disc width up to 50 mm Workpiece Ø 0.1 mm – 10 mm Max. workpiece length for plunge grinding 50 mm Smallest regulating disc slide feed 0.001 mm Circumferential speed of the grinding wheel 25 / 35 / 50 m/s Circumferential speed of the regulating disc 6-94 m/min During dressing 143 m/min Accessories: AAG loading system "HF120" (Agathon patent), coolant basin The machine can be viewed by appointment in our factory in Krefeld. Price ACTUAL condition from stock: on request – Errors, changes and prior sale excepted –

FOIL SEALING MACHINE type TS 1000 C-2 Year of Build 1980, Machine No: 1748, for the production of bags made of suitable Polyethylene and polypropylene films Product: Tren suture bag Processing: single-lane or dual-use printed two-lane unprinted Working width: max. 1000 mm Section lengths: 80 - 600 mm Film thicknesses: 2 x 0.015 - 0.100 mm depending on the welding wedge design Working cycles (mech.): max. 150/min. depending on film thickness, type of film, film quality and Section length Film web speed: max. 35 m/min Power consumption: 4 KVA Nominal voltage: 380 V Nominal frequency: 50 Hz Control voltage: 220 V Cooling water consumption: approx. 42 l/h Paint: light grey according to RAL 7030

Mint condition, laminating width up to 1100mm, temperature 0- 14 degrees. Lamination thickness up to 13mm.

Axis:XYZ (3-axis) Max. travel:950x500x450 Tool:SK-40 Control:HEIDENHAIN ITNC 530

Clamp welding machine, foil welding machine -Connection: 220 V -Working width: 300 mm -Weight: 10 kg

Key data: 1020 mm, 610 mm, 610 mm

Control Heidenhain ... TNC 530 Clamping table surface ... 1200x600mm Axis X ... 1020mm Axis Y ... 610mm Axis Z ... 610mm Spindle speed ... 10-12000 rpm Controlled axes... 3 cooling ... 20bar SK 40 Max. workpiece weight ... 500kg Main engine power ... 22kW Rapid traverse ... 40,40,36m/min Magazine spaces ... 30 Machine weight ... 6970kg L x W x H ... 2920x2820x2860mm The machine is in good condition, possible to test under power.

used spiral mixer Boku SK 120 AK extendable, overhauled, for 120 kg dough per kettle, 2 timers, with 1 stainless steel kettle, if required with up to 2 other kettles for 3.500€ each, stainless steel spiral, 7.9 kW, 18.5 A, 400 V, 50 Hz, mesh no. 10287

SPECIFICATIONS max. sanding length mm: 1200 08 Spindle Hp 3.0 01 Engine (hydraulic pump) Hp 3.0 02 Motor Hp 1.5 for rotating brushes Complete with loader Control via 01 copy device in the upper part of the machine Hydraulic drive

MSX-850 Controller Max. turning diameter: 386 mm Max. bar passage: 52 mm Travel X/Y/Z/B: 260/100/590/624 mm Main spindle max. speed: 6,000 rpm Sub-spindle max. speed: 6,000 rpm Beghs3a 12-speed tool turret 12 driven stations 5.5 kW, max. speed: 6,000 rpm Automatic Parts Catcher Conveyor

Polishing machine - brush with 2 rollers used GMB mod. ROLL 1400 CE compliant machine Brush outer diameter mm. 350 Brush length mm. 1400 max Brush rotation speed 970 rpm/1' Worktop length mm. 6000 Useful working length mm. 5500 width of the worktop mm. 1400 Useful working width mm. 1400 total power used HP 33 - Nr. 2 motors each KW 11 (HP 15) with automatic star/delta start -The machine is fingered with two brushes; one is positioned at 90° with respect to the sliding of the table and the other is inclined. The cross-brushing system allows for excellent finishes. - The bench translation speed adjustment is variable, with inverter - Nr. 2 stops placed on the bench that adjust the stroke of the bench - Oscillation of the brushes with nr. 2 gearmotors (possible exclusion from the control panel) - Possibility to start the translation of the plane to the right and left in aut ...

Key data: 6400 mm, 1 mm

with the following equipment: Brand new JC100 controller Stop system type 20 conical 5 stop fingers standard Roller Shears SL 1.5 mm Material thickness adjustment type HM per stand dynamic positioning type DP Super High Speed Hydraulics (shs) LED lighting with signal function Safety according to BG Colour RAL 7016 anthracite grey/RAL 2004 light orange Total power requirement 16 A Insertion depth: 1250 mm Roller Shears SL 1.5 mm Number of stands: 6 pieces Opening width: 200 mm Bending angle 145 degrees Dimensions: 7800 x 1700 mm Weight: 5300 kg

Motorized Rounding Machine Foot Holder one. Rear angle infeed Emergency stop leash very good condition Colour: grey Total power requirement 16 A Shaft diameter: 65 mm Capacity: 1020x1.5 mm Weight: 300 kg Machine number: 05 125 001 Machine is repaired, checked, cleaned by a professional and is then fully functional. Test run is carried out.

Distance between centers: 1000 mm, Height of points: 230 mm, Main engine power: 9.2 Kw, Working wheel dimensions (od x id x width): 500x80x203.2mm, Ø max to be rectified: 460 mm, Tailstock cone: MORSE 4, Workpiece head cone: MORSE 5, Max. Z axis travel : 1115 mm, Max. X axis travel: 260 mm, Approximate dimensions (length x width): 440x370 cm, Approximate Weight: 4700 Kg

UV laser engraving machine with 15 watt laser power Laser source with 355nm wavelength / 15Watt Demonstration machine, with minimum operating hours (approx. 15 hours) - incl. Windows 10pro 64-bit PC system - incl. 22" screen - Everything is fully installed and adjusted - Engraving software in German - 3D software (MM3D) - Very easy to use - Switch on and get started - UV laser source with 15 watts for high-contrast and fast Extremely high resolution markings - Engraving on practically all metals (stainless steel, brass, aluminium, etc.) - Engraving on practically all plastics (including PVC, silicone, etc.) - Engraving on real glass (also crystal glass) - Cutting of real glass possible - Heavy industrial quality - Complete system / ready for immediate use - Working space approx. 500 x 600 x 600mm (lxwh) - Clamping surface with mounting threads in 50mm increme ...

Key data: 3000 mm, 200 mm, 400 kg

new laser cutting machine with 4kW fiber laser - Ideal workshop machine - Machine without changing table ! - Loading via manual extension table on the 3 meter side - Very space-saving - Extremely energy-saving cutting system - Only 5 x 3 meters installation area - Incl. commissioning / training Instruction in your factory - 4kW laser source - Top quality, arrange a viewing now! Cutting of steel sheet up to 20mm Cutting stainless steel sheet up to 10mm Cutting aluminum sheet up to 8mm Cutting brass sheet up to 8mm - Travel 3000 x 1500mm - Machine control in German - German service and spare parts supply - incl. nesting module - Very easy to use. - Powerful laser cooler The sale is exclusively to tradespeople. Delivery / Consulting / Sales only in Germany / Austria / Switzerland Machine dimensions approx.: Width: 3.0m Height: 2.3m Length: 5.5m To ...

Inv. Num. : 7635 Type: SH 1400 NC Producer: Sahos Generated: Parameters: The lathe is in good condition.

CNC machining centre HERMLE U 1000 T – universal milling machine For sale is a high-quality CNC universal machining center from the renowned manufacturer Hermle, model U 1000 T. The machine impresses with its stable design, high precision and versatile applications. Ideally suited for toolmaking, single part production and demanding milling work. General information: Machine Type: CNC Machining Center / Universal Milling Machine Manufacturer: Hermle Model: U 1000 T Year of Make: 1999 Control: Heidenhain TNC 426 Condition: Used, good general condition, functional Shipping time: Immediately available Technical data: Travel (X / Y / Z): approx. 1000 / 630 / 550 mm Table size: approx. 1200 × 630 mm Tool holder: SK 40 Spindle speed: up to approx. 7000 rpm Tool magazine: approx. 16 places Quill stroke: approx. 75 mm Milling head: swivel 0 – 90° (unive ...

Eyelet machine Hang 103 LOK, machine number 30621, eyelet diameter 5.5 mm, inner diameter 5 mm, waste suction device, in good condition, immediately available If you are interested, we will also be happy to inform you about other machines in our company. You are welcome to visit the machine in our house by prior appointment.

Edge Grinding Machine Lasm LBK 160 3P two-sided with feed Tiltable table Year of manufacture: 1986 The machine is in good condition, ready for operation. Subject to changes, errors and prior sale ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system+technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Phone: 0041 62 966 18 32 Fax 0041 62 966 21 12

calibrating sanding machine model LEVIGALTECNICA MIKRO SRTV/C mm.1000 second hand machine carpet in rubber max. working width mm.1000 machine composed by 1 belt combined : calibrating roller in rubber diam.mm.150 + pneumatic pad main motor power Kw 10 belt dimension mm. 2150 x 1030 feed speed of conveyor belt : n.02 speed m/min. 5 / 10 min. / max. working heigth mm. 3 / 165 volt. 380/50 weigth kgs. 800

Stock number: 3904 PROCESSING Manufacturer: BRIDGEPORT, Type: VMC 1000 30 Machine NO.: 822918, Year of manufacture: 2002 Specifications: Table size 1150 x 580 mm Large table load 800 kg Longitudinal movement (X) 1020 mm Transverse movement (Y) 510 mm Vertical movement (Z) 500 mm Spindle cone ISO 40 Spindle speeds 6000 rpm Total power 25 KVA Tool changer 30 places Control Heidenhain Fabr. Accessories: Chip conveyance. Length: 2200 mm, Height: 2800 mm, Width: 3200 mm, Weight: 4400 kg

Cardboard scissors working width 110cm, in good condition, immediately available. If you are interested, we will also be happy to inform you about other machines in our company. You are welcome to visit the machine in our house by prior appointment.

Precision Surface and Profile Grinding Machine FS1570 SL Grinding area: 1500 x 700 x 650 mm Grinding spindle motor: 18 KW Table drive: hydraulic Transverse drive: electromechanical Paintwork: RAL 6011 – reseda green Equipment: •Central lubrication • Wet grinding device • Fine adjustment knob on the transverse path handwheel • Dressing Diamond • Electro magnetic clamping plate 1500 x 750 mm • Magnetic plate adhesive force control Accessories: • Vertical automatic type SL with "LCD" flat screen and membrane keypad • Electric Straight Dresser • Stepless change of speed • Universal paper filter machine • Machine light • Column elevation by 200 mm • Precision balancing scale • 2 new grinding wheels Machine has been overhauled in 08/2018 "Invoice is available" Here's what was done: •Timing belt •Storage • Ball screw •  ...

Inv. Num. : 7681 Type: SABRE 1000 Producer: Cincinnati Milacron Generated: Parameters: Control system: HEIDENHAIN TNC 426CB X-axis travel: 1016 mm Y-axis travel: 508 mm Travel Z-axis: 558 mm

Cutting machine Wohlenberg 115 MCS-2 TV, machine number 3524-007, air table, light barriers, program control, monitor, side tables, back table cover, 1 spare knife, in good condition, immediately available If you are interested, we will also be happy to inform you about other machines in our company. You are welcome to visit the machine in our house by prior appointment.